What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

Similar Messages

What are the steps need to be taken care for MM data sources while extrac

what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
Racha

Hi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

What are the steps needs to be perform to define a data model

What are the steps needs to be perform to define a data model
a. Information Gathering
b. Hardware & Software
c. Structure the Information MDM
d. Transfer into a Physical Model BW data model
e. Explore use of existing model Business Content

Hi Siva,
 Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.

Project Preparation
Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
Blue Print
Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
 By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
Realization Phase
Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
Testing
 Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
Go live
Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after it will be transitoned to support team.
Hope It helps you.
Assign Points if it usefull
Regards
Sujan

I have 91 file that are pdfs i need to make searchable what is the best way of doing this

help
i have 91 file that are pdfs i need to make searchable what is the best way of doing this

Hi ismaelr61128862,
I would recommend you to try Advanced search option of Acrobat software, Go to Edit and then Advanced search.
Hope that helps. In case you have any further questions please provide sufficient amount of details so that i can assist you more accurately.
Regards,
Rahul

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

You are allowed to have two activated installations, so if you prefer to you can keep ut on the current machine and just install it on the new one like you did originally. If you wish to eliminate it on the other machine, the first thing to do is to deactivate it by opening a program in the suite and selecting Help -> Deactivate in the top toolbar. That is all you need to do to disable the software. At this point if you prefer to you can uninstall it if you like.
As far as getting it on the new nmachine, as I just indicated, just install it like you did the first time.

Case number 0123115765 ser no serial numbers removed send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without

case number 0123115765 ser no <serial numbers removed> send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without any fuss!!! Regards answer via email what to do! Regards Bo

Call Apple to get the replacement DVD > http://support.apple.com/kb/HE57 When you have the DVD, insert it and install iPhoto. Finally, open  > Software Update and install the most recent version

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

HT201272 Tried following the steps on this doc, but upon tapping the Cloud Icon ( Re download icon ) it redirects me back where i need to Purchase again and update billing information.

Tried following the steps on this doc, but upon tapping the Cloud Icon ( Re download icon ) it redirects me back where i need to purchase again and update billing information.

Tried following the steps on this doc, but upon tapping the Cloud Icon ( Re download icon ) it redirects me back where i need to purchase again and update billing information.

AE what are those things that turns on and off in the Project

AE what are those things that turns on and off in the Project

I had was $1,000 credit in September of 2014. In October, I called Digital Juice, because I had a stroke 25 years ago and I told him I would be foolish to give up $1,000 and join Platinum Account. He agreed with me. He then said why don’t you join Platinum Account, and he can update the $1,000 to the account. I said, OK. Then about January 2, $1,000 was in the Platinum Account. I am starting to do some Wedding videos, and I just noticed that the $1,000 credit wasn’t there. What happened to my $1,000? Oh by the way, your Update Status only goes back to December and not back to July.
Rich
"Todd_Kopriva" <[email protected]> said:
AE what are those things that turns on and off in the Project created by ( https://forums.adobe.com/people/Todd_Kopriva ) in After Effects - ( https://forums.adobe.com/message/7122815#7122815 )
I don't understand the question. Please explain in more detail.

HT1390 I did all the steps in this article but I get the msg: "Movie Title" was not copied to the iPad because it cannot be played on this iPad. The moive never moves over. What gives?

I did all the steps in this article but I get the msg: "Movie Title" was not copied to the iPad because it cannot be played on this iPad. The moive never moves over.

Did you download Tron in HD? If so, try syncing the SD version that came with it

HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.

Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

I have a hitachi hard drive from an old pc. I would like to transfer pics and music to my macbook air. What cord do I need to make this possible?

I have a hitachi hard drive from an old pc. I would like to transfer pics and music to my new macbook air. What cord do I need to make this possible?

Some external cases include cords others (like some printers) consider the cord to be "optional" - read the package or product description. Other World Computing, HH Greg, OfficeMax, any box store or local computer store should have a case for your old drive.
You are fortunate in that the Mac will automagically read the DOS format disk... you'd never be able to connect and old Mac HD to a WinDUHows machine.

After reinstalling MAC OS 10.6.8, config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with fsck, but after the steps to be taken, it says fscs not done, root device is read only

After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with Command+S and fsck, but after the steps to be taken, it says fscs not done, root device is read only. I also tried to bypass the Mac firmware password by taking one Ram card out and reboot the macmini while holding COMMAND+OPTION+P+R. But no luck. The macmini is not able to see the mac OSX installation CD.
Please help ??

f.fromleiden wrote:
After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot.
How and where did you change which permissions? And what was the goal?
Do you have a complete backup of your system? and more importantly data files?
What happened that prompted the need to reinstall the 10.6.8 update?
The immediate road forward would be to boot from the optical drive and revert the changes you made.
What happens when you boot with the install cd and hold down C or hold down the option key?
[Off topic: I've been to Leiden a few times ]

I s Final Cut X compatable with Sony HXR MC50E? What software would I need to make this camera compatable with FC7?

Is FCP X compatable with Sony HXR MC50E? What software would I need to make thia camera compatable with FCP 7

I import media from anothe SONY HXR series camera all the time...

Make certain fields in the Account Detail Page Read-Only based on a Checkbo

Hello
We would like to make certain fields on the Account Detail Page Read-Only based on a checkbox that is on the Admin Account Detail Page. The fields we are looking to make read-only are Account Name, Primary Address, Phone Number.
Thanks

Brian,
I think you'd need to use dynamic page layouts for this. Look at the Account type values, if you are already using it then replicate those values you have so if you have Business and Personal make it Business Read-only and Personal Read-only.
When you are ready to lockdown those fields change the Account type from Business to Business Readonly and have the page layout for this screen with Account type, Name, Primary address and phone number as read only. You will a separate page layout for yourself so that Account Type stays as writable for you.
You will need to check if you can have Account Name as read only as it is a required field.
cheers
Alex

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Similar Messages

Maybe you are looking for