In Multimapping how can we configure the Receiver , Interface Deter for BPM
Hi Friends ,
I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
The steps Which i have followed in BPM are
1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
Block Start and Block End as New Transaction
2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
3. Transformation Step
It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
4. Send Step
It sends the New Message . It creates the New Transaction .
Can you Please tell me how to configure the Receiver and Interface Determination for the above scenario ?
Regards.,
V.Rangarajan
Hi Ranga
have a look at these
you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm
if useful pls reward
Similar Messages
-
How can we configure the width of the table in SAP DB
Hello sirs,
How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
With best regards,
Sudheesh....Hi,
The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
Can we change the column width?
The answer is 'NO'.
check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
The restriction cannot be broken.
Regards,
S.Divakar -
My Flah Help can't download newer Versions and Ressources. So i can't use it. And i have to. And i paied for it.
So: How can i deinstall the rotten ADOBE HELP for Flash CS5 an install a new one (Mac OS X 10.6.8 )?Do you receive an error message when trying to use the help files? What have you tried so far to resolve your difficulties?
-
How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac? I have a list of his passwords, but nothing works! I know his email, but that account has been cancelled for security purposes, so we can't just request a new one. I tried his security questions to no avail.
ThanksSince that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.
-
How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks
http://support.apple.com/kb/ht5621
-
Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.
Yes. Delete the Apps that were not Purchased using Your Apple ID.
But a Restore as New is the way to go. -
For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?
For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?
-
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
-
How can i write the below code using "For all entries"
Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.Hi,
SELECT objnr objid aufnr
from afih
into table t_afih.
SELECT objnr
from JEST
into table t_JEST
where stat = 'A0045'
OR stat = 'A0046'
AND inact 'X'.
SELECT objnr
from COBRB
into table t_cobrb.
SELECT arbpl werks objid objty
from crhd
INTO table it_crhd
FOR ALL ENTRIES IN it_afih
WHERE objty eq 'D'
AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
FROM caufv
INTO table t_caufv
FOR ALL ENTRIES IN it_afih
WHERE aufnr = it_afih-aufnr
And pspel = ' '
AND txjcd = ' '
ANd objnr ne it_crhd-objnr
AND auart in s_wtype
AND werks in s_plant.
AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
if if t_caufv-objnr ne it_jest-objnr.
(proceed further).
endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu -
The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?
Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.
-
How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?
You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.
-
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
I want to convert the “PO - Printed Purchase Order” report from Oracle rdf format to BI Publisher. I am looking for the template but could not find in UNIX.
As per the Oracle blog, the template is available. Please see the URL : https://blogs.oracle.com/xmlpublisher/resource/121BIPReports.pdf
The template code is POXPRPOL_XML.rtf
when I look at the $PO_TOP/patch/115/publisher/templates/US directory, I cannot find POXPRPOL_XML.rtf
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
Thank you,
Biju Varghese.How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
find by code or name
open it and you can downloadtemplate by "download" button -
How can i create the blue "I"-Button for the Documentation in a view
How can i create the blue "I"-Button for the documentation in a view?
I want to prepare the button with user specified Information...
and where must be create the documentation?
thanks
Edited by: DDC-TD on Apr 24, 2008 10:22 PMyou have not mentioned where do u want the " I " information button ,
1. If u want for a report , u can get the information button on selection-screen only .
if u goto se38 on the mail screen u will find a radio button for documentaion ,
when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
2. Or specify where u want info button .
thanks ,
reward points if usefull. -
How can I download the latest Microsoft Office for my Macbook Air through the App Store?
How can I download the latest Microsoft Office for my Macbook Air through the App Store?
Welcome to Apple Support Communities
Microsoft Office is not available in the App Store. Instead, you can purchase it in the Microsoft site > http://www.microsoft.com/mac
Note that there are other apps that do the same, like Apple iWork (available in the Mac App Store) or LibreOffice, open-source and free. I recommend you to give LibreOffice a try.
If you are interested in Office for Windows, you can find it in the Microsoft Store or at shops -
I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Maybe you are looking for
-
Isight + Tiger No longer works
Since I have upgraded to Tiger my Isight no longer works. I can start a chat but after about 10 to 40 seconds it disconnects me. I have taken it in for repair and they all tell me it is fine. If I go to preferences, video, I can see myself, I also ha
-
I'm using windows 7 with PSE9. Where is the menu bar??
This is a brand new computer HP-400 , 23" screen. Also brand new individual license of PSE9, My PSE 7 worked great on my XP. How do I get the menu bar to show? Alsom the 'Export' option in the editor is grayed out. How do I export as new file????
-
Set default Value for a key figure
Hi Experts, I need to enter a set o value for some char in a layout but for this set is not relevance a keyfigure. I know that there needs to be a keyfigure in the layout for the data to be saved to the transactional cube. So is there a way to write
-
Real World X99 5960X 4.4ghz, 36MP files & Lightroom 5 - ~1.09sec JPG Export
Hi All, I've been trawling the net for the longest time since the X99 was launched. There wasn't really real world LR performance results I could find, so I am sharing this info with the community here. I am a professional photographer, formerly tra
-
Re: Please Help. PSE11 Organizer Preferences won't open. I have new PSE11 software & new computer running Windows 8. Organizer>Edit>Preferences. Little box says "Loading..." forever. Screen locks and I have to go to Task Manager to End out. Pr