In my library i'll show an album but on my classic it will show the album twice, why? and how can I fix it?
Not every body is a computer wizz so why make it so difficult to get an answer. I asked how do I fix it when your library on your PC shows an album that same album shows up twice on my classic. Am I the only one getting frustrated from having to jump through hoops. I thought they were going to make this technology easier for the common person, maybe I was wrong. Help.
See Grouping tracks into albums - still a few hoops but they should get you sorted.
tt2
Similar Messages
-
My ipad inbox suddenly shows 18500 emails but there are only 20 or so shown. What happened and how can I correct? Thanks
Backup, backup, backup...
T-21 wrote:
Hello.
I did not touch my computer the past week, I've only been messing with my laptop. I had my computer off a whole day. I turn it on, open iTunes, and everything is gone.
Is your laptop a different computer than your computer?
You have two computers?
iTunes is missing everything from which one/both?
I system restore. Everything is gone. None of my podcasts, apps, or music files are there.
Do you mean you reinstalled the system from scratch?
Yes, that tends to delete everything.
Or you restored everything from a backup?
Directions on where to go to download all past purchases?
Selete Store on the left side of iTunes.
Make sure you are signed in.
Click on Purchased on the right side under Quick links to redownlaod your purchases.
Then make sure to regularly backup, backup, backup all your important data . -
Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?
When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT -
All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods. -
I have added more songs to my library. Half of the library has selected ticks but when I click on any of the others to select them, the whole song disappears from the list. Why and what can I do to fix?
Hey Paul,
If I understand correctly, it sounds like iTunes is not grouping the songs from a particular CD together. The cause could be something as minor as a misspelling or slight variations. For more information, see the following resource:
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks,
Matt M. -
My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.
Hello Korawees,
I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
Before Starting
It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
How to restore iPod shuffle
Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
Download and install the latest version of iTunes if you do not already have it installed.
Open iTunes, and then connect iPod shuffle to your computer.
After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
When you come to step 7, I recommend Restore Option 4.
Take care,
Sterling -
It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?
Hello Whitney262,
Thanks for using Apple Support Communities.
I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases. The article below will walk you through the entire process:
Download past purchases
http://support.apple.com/kb/ht2519
Take care,
Alex H. -
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I'm getting a message that reads 'The iTunes Library file cannot be saved. You do not have enough access privileges for this operation." Why is this? And how can I fix it? I'm worried that I'm going to lose my entire library because of this.
A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them! -
Code 5200 shows up on my pixmamx320. What is it and how can I fix it.
Code 5200 shows up on my pixmamx320. What is it and how can I fix it?
Hello pep303.
To try and resolve this issue, please unplug the power from the unit for about 25-30 minutes. Once this time frame has passed, plug the unit in directly to a wall outlet to see if the printer will power on.
If the error still remains, please contact a technical support representative at 1-800-652-2666 between the hours of 10 a.m. and 10 p.m., EST, Monday - Friday for additional assistance with this error.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
when I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other". What is that about and how can I free up that space?
I simply restored my iPhone from most recent iCloud backup. Poof. Good to go!!!
-
My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?
My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?
My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?
-
I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.
iTunes Store > Purchased > Music > Not on this computer.
tt2 -
I just installe Lion and when I get to the log in screen it shows the two users but when I try to select either of them nothing happens. How can I fix this so I can log in.
Can you select them with "Arrow left" or "arrow right" key on your keyboard?
-
I downloaded an album and on one of the songs it skips to the next song half way through the song... How can I fix this?
Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.
Maybe you are looking for
-
Hai all, I have two questions on Process chains. 1. I created a process chain for master data and a process chain for data loads(with ODS and cube). As the Master data has to be loaded first before loading transaction data, can I include the
-
Trying to uninstall and reinstall Flash Player.
32bit IE on WinXP Trying to do a fresh install of my Flash Player. I use the Adobe uninstaller on ver 10.2. Check the Adobe page and it shows that I have no Flash player installed. I then restart my computer and go to the Adobe page which shows th
-
HI, I am getting error while creating a SUBPARTITION for my table. CREATE TABLE Tab1 col1 NUMBER(12), col2 CHAR(1 BYTE), col3 CHAR(1 BYTE), col4 NUMBER(12) PARTITION BY LIST (col1 ) SUBPARTITION BY HASH (col4) SUBPARTITION TEMPLATE( SUBPARTITION SP_1
-
Hello, one of user accounts on my mac is innoperative. I think (not sure though) that it happend after my bettery ran out a 2 users were logged in at that time. After resuming system both account were corrupted. No application could be launched - cor
-
We would like to use cyrilic language characters in ECC system with custome
We would like to use cyrilic language characters in ECC system with "customer reserve" language (Z1). We have positive experience on one system for certain business partner in Macedonia (there is no Macedonian language to install as SAP standard) by