In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer
In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer
The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?
Similar Messages
-
I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version
You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/ -
I have just clicked on my iTunes desktop icon and got the following message "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Why has this occurred when it working fine? Is it best to update iTunes to 10.2 to attempt to resolve? Initially I got the prompt Quicktime was out of date so I updated that successfully in all programs. I do not want to lose my iTunes library.
Sorted problem updated and reinsatlled and restarted computer.
-
Ipad will not accept new version of itunes
ipad will not accept new version of itunes
What version of iTunes are you trying to install. If its 10.6.3 or 10.7, those versions are installed on a computer, not the iPad.
Cheers, Tom -
System should not creates new version when value of PO increased..
Hi Experts,
Need your help to solve this problem. When i increase value of PO it should retrigger Release strategy but it creates version first, then i have to tick completion indicator and check then only release strategy retriggers..
It should not create new version when change po
Please check below screenshot
Please helpHi
Please reveiw the following points in note
- 493900 FAQ: Release Strategy
4. Why is the release strategy not determined?
"If you use version management, the determination of the release
strategy starts when the version is completed.
You complete a version by setting the "version completed"
indicator in the version tab."
- 662993 Resetting an already occurred release
You edit a purchasing document with release strategy.
You change the quantity or the price. In spite of that, the
already set release is not reset.
The release strategy works the same with or without version management
active - the only difference in case - version management is active -
is that if release is to be reset, it will be reset only on version
I hope this helsp to clarify this issue
Kind regards,
Lorraine -
I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?
Go to iTunes > about iTunes. What version are you running? If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.
-
Essentially, the CMS we use to manage our website (mainstreetartsfest.org) is Sitefinity, and apparently it doesn't support the newest version of Firefox. And, from what I understand, this version of Sitefinity is not being upgraded at the support level - we are now being asked to spend $$ on moving to a new CMS to support the browsers. Chrome, Safari also a problem. Only IE works, and we all have Macs. I want to know if we can have the older Firefox AND the upgraded Firefox both on our computers so we can use the new Firefox for general browsing, and resort to the older, 3.2 version for managing the CMS. I know I can download a previous version - but I would rather not replace our new version of Firefox in the process.
You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
This morning FF would no start-up. Down loaded new version from website and replaced old version. New version will not strat-up as it says "incompatible" with Op Sys.
Firefox 4 versions and later do not run on a PowerPC Mac.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 7 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
Using a Mac desktop OS X 10.6. I've made repeated attempts to update software. The download process for Firefox quits and a dialogue box pops up -- saying the new version did not download. File may be corrupt or unable to be decoded??. Process started by clicking on the New Firefox version is available for Free download on Mozilla home page.
More information - the popup box says:
Adobe Reader could not open 'Firefox 8.0-8.dmg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
The file was downloaded into my "download" folder? Is that related to the problem? -
Compressor not opening / new version not functioning
Hi folks- This is a stumper for any of you non-Intel chip users.
Short version: A new version of Compressor was installed on my G4 recently , which doesn't function properly. I tried uninstalling it, and reinstalling an older version, but the older version doesn't open.
Long version: I'm a professional videographer, and use FCP (Studio 1, 5.1) on a regular basis, frequently using DVD Studio Pro (4) for authoring DVDs, thus using Compressor (my last version was 2.3) as an intermediary.
For an unrelated project, I recently purchased Logic (8.0.2), which during installation also upgraded a few other Apple softwares in the process, including an upgrade to Compressor 3.0.3.
Unbeknownst to me, the Compressor 3.0.3 doesn't work on my machine properly, I'm guessing because it's an older machine. I opened up Compressor today for some routine work, to discover a warning that said:"The installed graphics card does not support the OpenGL features recommended by Compressor."
This warning still allowed me to open the program, but when I loaded up several files for compression, it gave me a warning, saying "Each target assigned to a job must have a setting and destination" EVEN THOUGH every item did indeed have both a destination and two settings. Hmmm...
So, I figured that since Compressor 3.0.3 wouldn't work correctly, I would uninstall it, and reinstall my older version off the FCP Studio disc. But when I did this, version 2.1 would NOT open at all on the machine. I could click the application all day long, but it won't open. Hmmm. I tried upgrading 2.1 to 2.3 through Apple's Software update, but the 2.3 upgraded to the 3.0 again. Arghh!
I'm either left with an un-openable 2.1 or a non-functioning 3.0. Any suggestions, recommendations?
-ChrisHi Alberto-
Thanks for the reply, and the help. I was indeed dragging my settings onto the job itself (rather than the empty window), so I knew that wasn't the problem per se. But I'm so glad that you had within your previous post the URL to the Compressor Tutorial. Because at the very bottom of the tutorial page, I found exactly the problem I was having.
It's some strange quirk with Compressor 3--sometimes when you drag your settings onto the job, it still leaves the first line as a destination with no setting. That's what my machine was doing. It's an odd bug they should work out--and you can see what was happening on the bottom of the tutorial page you sent me.
Even so, I wasn't aware of this last night, so I had found an older support page about how to uninstall Compressor 3 (deleting files from the library folders & such--frameworks, receipts, et all), so I went ahead and did that, then reinstalled my Compressor 2.3 from scratch, and things worked well after that.
For the time being, then, I'm back to Compressor 2, but now I know that when I reinstall Compressor 3, I have to look out for that problem, and I'll know how to work around that odd quirk.
Thanks so much for your help, Alberto!!!
-Chris -
Aperture not creating new version of raw image when editing in external editor
I have my export settings set up in Aperture 3.5.1 as editing int Photoshope Elements 12 as Tiff files. When I right click on a raw photo in aperture and say to edit in PSE, it will open it in the program, but only in camera raw.
This happens even when I have made edits to that particular file, such as exposure. This is causing problems with saving back to aperture. I have troubleshot this with Elements and the problem seems to be that Aperture is not creating a new version on export.
Can you tell me what I need to do?
Thanks so much for any insight.What you have described is not how it is meant to work so it sounds like there is an issue on your system.
Try running the first two first aid procedures (repair permissions and repair database) as described here:
http://support.apple.com/kb/HT3805
I think this should fix the issue, but let us know if it doesn't.
PS: When you drag the image from Aperture to PSE on the task bar, you are sending the JPEG preview to PSE, so that's an unrelated process.
Andy -
Xfdf and pdf works in Adobe Reader 6, but not with new versions 7, 8, X
I have a xfdf file which is created by querying a SQL data base and contains data for a pdf form; it works with Adobe Reader 6, but does not work with new versions of Adobe Readers (7, 8, 9 and X).
It is an intranet site running IIS 6.0 in Windows Server 2003 Web Edition SP2 with Adobe 6 installed and client systems include XPSP2, XPSP3, Vista, Windows 7 with different versions of IE, Firefox.
With new versions of Adobe Reader, click on the hyperlink launched the pdf form in a browser window without data; below is the link:
// create shipping slip hyperlink
string strLtrSlipUrl = "~/Archive/LtrShipSlip.pdf#FDF=" + lblWO.Text + "LtrShipSlip" + ".xfdf";
HyperLink hlLtrShipPdf = new HyperLink();
hlLtrShipPdf.Text = "Ltr Shipping Slip";
hlLtrShipPdf.NavigateUrl = strLtrSlipUrl;
hlLtrShipPdf.Target = "_blank";
pnlLtrShipSlip.Controls.Add(hlLtrShipPdf);
I have installed new versions of Adobe Reader in the Web server (to match what the clients are using), but results are the same – blank pdf.
I uninstalled the new versions and installed version 6 and the pdf and xfdf worked happily together, but we need new versions of Adobe Reader in the client computers.
Thanks for helps and suggestions – I have read articles about using iTextSharp to create pdf documents from .NET apps, but that would be my last choice.Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.
-
My computer will not install new version of itunes
I have uninstalled the new version and my computer will not install
I suspect there is information you are not providing. I do not think it is possible to uninstall iTunes on a newer Mac running Lion or later. If you truly uninstalled it you must be running an older computer and you may be trying to reinstall a version not compatible with that computer. Alternatively, you did not really uninstall iTunes but did remove some other component that has stopped it from working.
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present). -
drag and drop ability not available in new version. I am trying to upload a large number of photo file to an online photo site for processing and the drag and drop does not work it did on the old version.
Nothing to be fixed. Just a little learning for you.
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected. -
Generate DDL works in old version of SQL Developer, but not in new versions
Hello all,
How to generate DDL in new versions of Oracle SQL Developer for production Oracle database?
For production database, the generate DDL feature works fine in old versions (version 1.5.5) of Oracle SQL Developer, SQuirrel, Toad and many other similar tools, but not the new versions of Oracle SQL Developer (such as 2.1.1.64.45).
The SQL tab for a table is blank for me in production databases. Of course, it works fine in development Oracle database.
I did some research that many articles describe SELECT_CATALOG_ROLE as the required read-only role in production database. Our DBA did a test to grant me this role temporarily, and it worked for me to generate DDL using new Oracle SQL Developer. It is pain for me to ask for this role.
Is there a plug-in or work-around, so the new versions of Oracle SQL Developer can have this generate DDL feature in production without the mentioned SELECT_CATALOG_ROLE?
I could not find the answer in older forum threads.
For now, I will have to install older versions of Oracle SQL Developer.
ThanksI've seen a couple posts about people not being able to generate DDL for other users. To date, I've never seen a anybody post a workaround, nor have I seen one of the developers post a response, nor have I seen anybody say they've submitted a SR.
I think I remember reading somewhere that the new version of SQL Developer uses dbms_metadata.get_ddl to generate DDLS, rather than some custom query built on top of catalog views...which could explain why it use to work, but no longer does. But whether or not this is true, I don't know.
You could try submitting a SR and see if Oracle responds saying that it's a known bug and will be fixed in the next release. Until then, unless you get the role, you're stuck using something else for DDL generation.
Maybe you are looking for
-
Could not carry out your request as the active layer is empty (error message)
Hi I keep getting this message when I try to do the most basic of manual quick adjustments to a simple photo in elements. Any idea what it means and how I get rid of it!? thanks
-
Why do I need to "pushstart" this Sawtooth?
I just bought a Sawtooth from a thrith shop for $25. It was dead, had no RAM, and no Drives, but that was ok since I planned to swap the gear from my Blue & White. The RAM from the Blue & White didn't work, but the power supply, and a new 512 meg sti
-
I have forgotten the answers of security questions and the line of "forgot your answers? send reset security info email to ......." how can i reset them?
-
hi, In a business process for internet connection price for the 1 day total cost is rs 50 & 3 days total cost is rs 45. So business sold 100 quantity connection for 1 day price & 60 quantity connection for 3 days price. Then business wants to cre
-
Photoshop CS6 windows won't install with my serial number given says not valid
I bought my extended photoshop cS6 in 2012 and installed on Mac computer now I'm trying to install on my new dell laptop with the windows disc and the serial number i have in my account under product is not valid?