In Russia, the operator MTS (Mobile TeleSystems) launched LTE band 5 (850 MHz)

Good day!
In Russia, the operator MTS (Mobile TeleSystems) launched LTE band 5 (850 MHz), but I can not use LTE, as my iPhone 5 is not connected to the LTE network! NO SUPPORT! At my rate has access 4G and on the other phone with LTE 850 MHz all works, and in an iPhone 5 does not work! Create an update for MTS in Russia! You need to change the version of the operator with 14.0 and change something in the software!
https://sites.google.com/site/ltedepot/home/country/russia/mts

wjosten wrote:
You can still purchase the iPhone in Russia, but no carriers officially support it anymore.
http://www.technewsnow.com/news/russian-carrier-beeline-drops-the-iphone
I don't read Russian, but Beeline, at least, seem to be prominently advertising and selling the iPhone still:
http://iphone.beeline.ru/5/start/index.wbp
so unless there's a note on their site stating that they're going to stop, the reports that all Russian carriers have dropped the iPhone would seem to be incorrect or at least premature.
Regards.

Similar Messages

Why doesn't the GSM iphone 5 have five LTE bands?

I notice the CDMA iphone has five LTE bands while the GSM instrument has been separated into a European and North American version.

Because it doesn't. No one here can answer any question as to why Apple made the engineering decison they did.

'The mobile phone rejected the operation' Error - ...

Hi,
Using E70 via Bluetooth. Everything works for sync etc.
When I click on contacts, it gives me the error 'The mobile phone rejected the operation' and does not allow me to view my contacts.
On occasions it will show the contacts, then something 'hides' them again and will then go back and browse the 'root' directory of the phone.
Im not aware of any security settings or such. At the moment, when I try and do something the phone asks to allow the connection, I do - but still nothing.
Any ideas?
Thanks

working now - upgraded pc suite again - a few reboots - and sorted. bug in previous pc suite??

1488: The workstation is no longer imported to the tree from where you are attempting to launch the operation. The Remote Management session cannot proceed.

After upgrading a Windows XP Pro SP1 machine to the ZfDagent from the
zfd65u2 patch I receive the following error:
1488: The workstation is no longer imported to the tree from where you are
attempting to launch the operation. The Remote Management session cannot
proceed.
For now I have went back to the ZfD 4 IR5 agent which doesn't exhibit this
problem. Any ideas?
Jim Webb

Jim,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT204023 can i use my i phone 4 as a internet modem to connect internet through the computer. where i got mobile internet plan through the operator.

can i use my i phone 4 as a internet modem to connect internet through the computer. where i got mobile internet plan through the operator. and i can surfe the net through the phone.

You can share your "cellular data" with the computer and other devices through "personal hotspot". You may use USB cable, Bluetooth or Wifi for sharing.
Reverse tethering (sharing internet connection of your computer with iPhone) is not supported.
Call your carrier and activate the cellular data/3G plan on your package. Note that "personal hotspot/internet tethering" is operator dependent feature. Confirm with your carrier or go through this article to see if your carrier is listed and offers this service.
http://support.apple.com/kb/HT1937
** The new iOS version is 5.1.1.

Mobile me verification failed the operation couldn't be completed ...account error 500. doeas anyone at apple actually sort these problems out?

tried serveral times ot set up find my phone, but all i get this this message "mobile me verification failed the operation couldn't be completed account error 500"
Do apple actual read these forums and help anyone?

Check that the date & time are set correctly. This solved it for me.
Good luck.

Launch PB in CS5 and get "The operation could not be completed."

I had been using the PB plug-in previously and it worked fine. Since that time, I have installed no new hardware or drivers but have installed Topaz Adjust 4 filter. Now, when I have an image opened in PS CS5 and I click Filters -> Pixel Bender -> Pixel Bender Gallery... I get a modal dialog with the title Error and the message "The operation could not be completed." I tried reinstalling the extension and no luck.
Here's some relevant info:
Adobe Photoshop Version: 12.0.1 (12.0.1x20100625 [20100625.r.1146 2010/06/25:17:40:00 cutoff; r branch]) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 3073 MHz
Built-in memory: 2045 MB
Free memory: 360 MB
Memory available to Photoshop: 1634 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1400
Video Card Number: 1
Video Card: NVIDIA GeForce FX Go5600 (Sony)
Driver Version: 6.14.10.4690
Driver Date: 20031106141200.000000-000
Video Card Driver: nv4_disp.dll
Video Mode: 1400 x 1050 x 4294967296 colors
Video Card Caption: NVIDIA GeForce FX Go5600 (Sony)
Video Card Memory: 64 MB
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5\
Temporary file path: C:\DOCUME~1\matt\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 73.2G, 12.2G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
Additional Plug-ins folder: not set
...snip...
Installed plug-ins:
...snip...
   Pixel Bender Gallery 12.0
...snip...
   Topaz Adjust 4 10.0
...snip...
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
   Access CS Live
   CS Review
   CS News and Resources
Installed TWAIN devices: NONE

I take it you've rebooted your machine a few times since all this has happened? Something must have changed to cause this problem. You could try deleting the Photoshop preferences and the Pixel Bender plugin preferences. You doublechecked that you have the latest drivers from nVidia (and you did so by manually comparing the result provided on the nVidia driver page with the driver version found in the Display preferences? Are you running on a laptop? If so, who is the manufacturer?

On iOS 8 and "old" device for the operating system. О iOS 8 и "Старых" устройствах на этой операционной системе

USA.
Good day! I like you a fan of the forum users of APPLE. I live in the Russian Federation. Began his acquaintance with this company back in 2010 with the Ipad 2 device was still on ios 5. In January 2014 I made a gift and bought the iPhone 5s on OC IOS 7. I bought it at the official Russian official price that more accurately put Apple in 1100 $. In our country, it is a lot of money. With the money I could live for 3 months. In fact, I became the owner of a top (at the time) from a favorite device of Apple. My iPhone 5s worked perfectly on ios 7. sometimes met friezes light animation, and non-critical bugs, but who is without sin? Favorite company I was willing to forgive it because I see that she is trying to be better and not standing still. Looking WWDC presentation which provided us with iOS 8 you assured me that everything was better, faster, more functional. I was determined that update my iPhone 5s to iOS 8.0 ... APPLE releases new OC iOS 8 ... And I live! Behind the beautiful words that we said at the presentation of the great features of the new iOS hiding "something." And that "something" turned my phone in ... "pumpkin"! Yes! In that same stupid pumpkin! And now I will explain why I think it's pumpkin, not rose.
Sea bugs ... and they are awful and terrible as it does not give me the full extent of my work enjoy iPhone 5s!
Start from the beginning:
1 Streaming through technology "Air play".
"Air play" ceased to function properly! He was often disconnected from Apple tv and Apple airport express last generation. Apple tv 2g can not receive the signal from my iPhone 5s! And when it's all the same he gets a video playback does not last long, it just breaks and does not connect again! Helps to restart Apple TV and a hard reset by holding the button "HOME" button and "POWER". On the "Apple TV" is worth the latest firmware as these problems are manifested in the previous firmware of the device.
2 Built-in browser "Safari".
Tab in the "Safari" became constantly updated when I switch to another application or the other tabs! Apparent lack of memory (on iOS 7.1.2 with it all much better. At least when switching tabs does not re-update the previous tab).
Playing online video on non-optimized mobile site in the browser "Safari" really does not work! It is turned on and loaded almost to infinity! Sometimes just a black screen with an icon "Play" to be pressed at least 100 times, and the result is 0!
Scroll pages in the browser have become terribly sharp and smooth! on iOS 7.1.2 everything is fine, nice and smooth and no such bugs! Total confusion and thoughtfulness browser "Safari".
If the video still runs (for me equates to a miracle) then when rewinding the film is generally something strange ... Fast chooses how minutes and seconds I watch a movie (usually just starts playing from the beginning), or does not respond at all ... This is the same magic Apple? Unlikely.
3 multitasking menu (double-press "HOME").
Call multitasking (by double-clicking "HOME") began working with a delay, with a lag, c jerky animation, and sometimes even without it.
Control Center (which is called swipe upwards) was to slow down! Yes! That retard! Animation jumping shutter control center began play with tangible frame loss! If iPhone 5s under the control of OS iOS 7.1.2 everything happened smoothly, beautifully and dynamically in the iOS 8.0 it looks like on the iPhone 5 running iOS 7.C than strongly connected is not clear! Graphic differences from iOS iOS 7 8 almost equal to 0, and the speed of decline in almost 50%! How ?! Why ?! Why does my iPhone 5s become the iPhone 5 ?! This is an artificial slowing my device to increase the demand on the iPhone 6 or still glitch iOS 8.0 for iPhone 5s? Honey the company Apple, I really hope for the 2nd. Especially this shortfall fps animation curtain markedly if you open multitasking (acquired by double button "HOME") and call the control center and you'll see that the animation is playing choppy and not smooth! On IOS 7.1.2 this is not! Control center jumps smoothly and beautifully! On iOS 8.0 it happens all the time! Even if you turn off your favorite contacts and recent calls (I'm ashamed to say they thought) that appeared in iOS 8 (they are above programs on the multi-tasking) not solve the problem. As well, if you call the control center on the lock screen, then drop FPS will be very noticeable even to the untrained viewer (especially if you take two iPhone 5s one running iOS 7 and 8, the second on iOS and compare them on the forehead). If the Control Center click airdrop (air play) the animation of its appearance again played in spurts and not terribly nice and smoothly (especially noticeable on the lock screen and comparison of the forehead)! In a telephone call has been going absolutely shameless FPS drop a call center management and other activities!
And yes, for me it is a critical issue! I do not want the transition to iOS 9 my iPhone 5s turned to the iPhone 4 on iOS 7 (vid you all remember this terrible story?)! I want my iPhone 5s worked as smoothly as on iOS 7.1.2! Nor any justification for this inhibition iskuvsstvennoy I can not see! 8 beautiful iOS did not! graphic elements do not appear! So goes the Apple is doing this on purpose ?! We go down the list!
4 minor bugs that just break my brain and kill all the beauty of the use of "the best mobile operating system in the world"!
4.1. When a call comes in when you clicked the icon making a call the phone for about 2-3 seconds, vibrates and plays a melody. On iOS 7.1.2 ringtone and vibration stops as soon as you have accepted the challenge and in your ear does not play your ringtone by "imagine Dragons", cheeks beats you invented vibration in the style of "Tick-tonic."
4.2. When you look at the page on the Internet-phone terribly terribly strongly heated! A pair of piping hot! On iOS 7.1.2 is no such problem! Telephone hot, but not as much as on iOS 8.0!
4.3. Folder on the home screen opens with a delay of 0.5-1 second is the impact on the overall impression of iOS 8.0.
4.4. When you create a set (12 pieces) icons in one folder if dramatically open the folder and make swipe to the left then the following icons in this folder does not have time to boot up and are delayed by 1 second.
4.5. When you create a folder with 1-9 icons do if the above action fails then the animation (the same bug exists in iOS 7.1.2). It is very not nice aesthetically.
4.6. Scroll to your "Settings" felt terribly antsy. Although it is not only in the application "Settings" but also to the entire system and applications in general ...
4.7. Scroll to the Home screen has become less responsive to user actions all movements inogoda occur with jerky animation and some delay to the user.
4.8. Quite often, and without rational reason for going off the sensor device. That is, the screen does not respond to any user action! Helps pressing "HOME" or hard reset by holding the button "HOME" and "POWER".
4.9. Most people on the iPhone 5s lost communication with a mobile operator. Just go on and lost and because of this I have missed calls from their loved ones and friends (would cost you to be glad that I have not missed calls on business issues).
5.0. Many owners of iPhone 5s and iPhone 5 uhudzhenie complain about battery life. I honestly did not notice it, but we will not drop this off.
Outcome.
And now gets quite an interesting question, why? Why does my iPhone 5s began to slow? Why in the absence of graphical improvements are absolutely the same actions were reproduced with the loss of fps, slow down, lag, hover, fly? Why, if put next iPhone 5s on iOS 7.1.2 and exactly the same iPhone 5s on iOS 8.0 and pull the control panel to call multitasking bar, carry out all other actions I have described it on your device running iOS 7.1.2 it will work without any delays, lags, the deterioration in the responsiveness of the interface, reducing fps, and no departures from simple applications written directly by Apple? I see absolutely no any obstacles in the way to make the iPhone 5s to the operating system iOS 8.0 worked with the same smoothness, with the same responsiveness and speed as the iPhone 5s running iOS 7.1.2! I do not see what these restrictions are not!
There are many different bugs that I do not even remember now (as I write this text on emotions (positive) as able to roll back your iPhone 5s back to iOS 7.1.2, and he seemed to come alive with new life) and so far I have esteemed company APPLE does not eliminate these improvements do not, I will not go back to iOS 8.0! if the dispensation of these bugs, flaws, intentional degradation of the (almost identical in performance in comparison with the iPhone 6) IPhone 5s will not happen and the company APPLE will continue to apply to consumers of their products as a beta tester I will be forced to organize a petition and file a class action lawsuit in court not only in their own country (which is for the Russian Federation) but also in the United States and in other countries where people are just like me trying to deceive, mislead and force companies to buy new devices APPLE without having expressed any any more substantial explanation except as <iPhone 6 was 25% more powerful on with alignment with the iPhone 5s>!
P.s.
I hope Apple will still listen to their users and I also hope that it (Apple) still change his mind and will try in the near future to give users not-so-old devices (iPhone 5s, iPad Air, iPad mini Retina) and enjoy on all the new features of iOS 8 no lag, locked up, overheating, inhibited animation. Thank you for being there!
Ru.
Всем доброго времени суток! Я как и вы форумчане являюсь фанатом компании APPLE. Проживаю я в Российской Федерации. Начал свое знакомство с этой компанией в далеком 2010 году с устройства Ipad 2 тогда еще на ios 5. В январе 2014 я сделал себе подарок и купил iPhone 5s на OC IOS 7. Купил я его официально по официальной Российской цене которую выставила Apple точнее за 1100$. В нашей стране это очень большие деньги. На эти деньги я бы мог жить 3 месяца. По сути я стал обладателем топового (на тот момент) устройства от любимой компании Apple. Мой iPhone 5s прекрасно работал на ios 7. Иногда встречались легкие фризы анимации, и не критичные баги, но кто без греха? Любимой компании я был готов это простить так как вижу, что она старается быть лучше и не стоит на месте. Посмотрев презентацию WWDC на которой представили iOS 8 нас с вами уверяли, что все стало лучше, быстрее, функциональнее. Я твердо решил, что обновлю свой iPhone 5s до iOS 8.0... APPLE выпускает новую OC iOS 8... И я обновился! За красивыми словами, что нам говорили на презентации, за великолепными функциональными возможностями новой iOS скрывалось "нечто". И это "нечто" превратило мой телефон в... "тыкву"! Да! В ту самую тупую тыкву! И сейчас я объясню почему я думаю, что это тыква, а не роза.
Море багов... причем они ужасны и страшны так как не дают мне в полноценной мере насладится работой моего iPhone 5s!
Начнем по порядку:
1. Потоковая передача данных посредством технологии "Air play".
"Air play" перестал нормально работать! Он стал часто отсоединяться от Apple tv и Apple airport express последнего поколения. Apple tv 2g не может принять сигнал от моего iPhone 5s! А когда все же это у него получается то воспроизведение видео длится не долго оно просто обрывается и не дает подключиться повторно! Помогает перезагрузка Apple TV и жесткий сброс посредством удержания кнопки "HOME" и кнопки "POWER". На "Apple TV" стоит последняя прошивка так же эти проблемы проявлялись и на предыдущей прошивке устройства.
2. Встроенный в систему Браузер "Safari".
Вкладки в "Safari" стали постоянно обновляться когда я переключаюсь на другое приложение или на другие вкладки! Явная нехватка оперативной памяти (на iOS 7.1.2 с этим все гораздо лучше. по крайней мере при переключение вкладок не происходило повторное обновление предыдущей вкладки).
Воспроизведение онлайн видео на не оптимизированном для мобильных устройств сайте в браузере "Safari" толком не работает! Оно включается и загружается чуть ли не до бесконечности! Порой просто черный экран с иконкой "Play" на которою нажимай хоть 100 раз, а результата 0!
Пролистывание страниц в браузере стали до ужаса резкими и не плавными! на iOS 7.1.2 все прекрасно, плавно и красиво и таких багов нет! Общая заторможенность и задумчивость браузера "Safari".
Если видео все же запускается (что для меня приравнивается к чуду) то при перемотке фильма происходит вообще что-то непонятное... Перемотка сама выбирает с какой минуты и секунды мне смотреть фильм (чаще просто начинает воспроизводить все с самого начала) либо не реагирует вовсе... Эта та самая магия Apple? Непохоже.
3. Меню многозадачности (двойное нажатие кнопки "HOME").
Вызов многозадачности (посредством двойного нажатия кнопки "HOME") стал работать с задержкой, с лагом, c дерганой анимацией, а порой и вовсе без нее.
Центр управления (который вызывается свайпом снизу вверх) стал тормозить! Да! Именно тормозить! Анимация выпрыгивания шторки центра управления стала воспроизводиться с ощутимой потерей кадров! Если на iPhone 5s под управление OS iOS 7.1.2 все происходило плавно, красиво и динамично то в iOS 8.0 все выглядит как на iPhone 5 под управлением iOS 7.с чем это связанно решительно не понятно! Графические отличия iOS 7 от iOS 8 практически равны 0, а скорость работы сниженна практически на 50%! Как?! Почему?! Почему мой iPhone 5s стал iPhone 5?! Это искусственное замедление моего устройства для повышения спроса на iPhone 6 или все же недоработка iOS 8.0 для iPhone 5s? Дорогая компания Apple, я очень надеюсь на 2-е. Особенно эту нехватку fps в анимации шторки заметно если открыть многозадачность (посредством двойного нажития кнопки "HOME") и вызвать центр управления и вы увидите что анимация проигрывается рывками и не плавно! На IOS 7.1.2 такого нет! Центр управления выпрыгивает плавно и красиво! На iOS 8.0 это происходит постоянно! Даже если отключить избранные контакты и недавние вызовы (я грешным делом подумал на них) которые появились в iOS 8 (они находятся выше программ на панели многозадачности) проблему не решить. Так же, если вызвать центр управления на экране блокировки то падение FPS будет очень заметно даже для неподготовленного зрителя (особенно если взять два iPhone 5s один под управление iOS 7 и второй на iOS 8 и сравнить их в лоб). Если в центре управления нажать кнопку airdrop (air play) то анимация ее появления опять таки проиграется рывками и ужасно не красиво и не плавно (особенно заметно на экране блокировки и при сравнение в лоб)! При телефонном вызове происходит уже совсем уж бессовестное падение FPS при вызове центра управления и при других действиях!
И да, для меня это критичная проблема! Я не хочу чтобы при переходе на iOS 9 мой iPhone 5s превратился в iPhone 4 на iOS 7 (Вы видь все помните эту страшную историю?)! Я хочу чтобы мой iPhone 5s работал так же плавно как и на iOS 7.1.2! Ни каких оправданий для этой искувсственной заторможенности я не вижу! iOS 8 красивей не стала! графических элементов больше не появилось! Так выходит компания Apple делает это специально?! Идем дальше по списку!
4. мелкие баги которые просто разрывают мой мозг и убивают всю красоту использования "Самой лучшей мобильной операционной системы в мире"!
4.1. При входящем вызове когда вы нажали иконку принятия вызова телефон еще около 2-3 секунд вибрирует и проигрывает мелодию. На iOS 7.1.2 мелодия и вибрация останавливается как только вы приняли вызов и вам в ухо не играет ваш рингтон в исполнении "imagine Dragons", по щекам не бьет придуманная вами вибрации в стиле "Тик-тоник".
4.2. Когда смотришь страницы в интернете телефон ужасно-ужасно сильно греется! Парой обжигающе сильно! На iOS 7.1.2 такой проблемы нет! Телефон горячий, но не так сильно как на iOS 8.0!
4.3. Папки на домашнем экране открываются с задержкой в 0.5-1 секунду это сказывается на общем впечатлении от iOS 8.0.
4.4. При создании множества (12 штук) иконок в одной папке если резко открыть папку и сделать свайп влево то следующие иконки в этой папке не успевают загрузиться и отображаются с задержкой в 1 секунду.
4.5. При создании папки с 1-9 иконками если проделать описанное выше действие то произойдет сбой анимации (этот же баг есть и в iOS 7.1.2). Это крайне не приятно эстетически.
4.6. Пролистывание в приложении "Настройки" стало ужасно дерганым. Хотя не только в приложении "Настройки" но и по всей системе и в приложениях в целом...
4.7. Пролистывание на Домашнем экране стало менее отзывчивое на действия пользователя все движения иногода происходят с дерганой анимацией и какой-то задержкой на действия пользователя.
4.8. Довольно часто и без объяснимой причины происходит отключения сенсора устройства. То есть экран не реагирует ни на какие действия пользователя! Помогает нажатие кнопки "HOME" либо жесткий сброс посредством удержания кнопки "HOME" и "POWER".
4.9. Большинства людей на iPhone 5s пропадает связь с сотовым оператором. Просто берет и теряется и из за этого я уже пропускал звонки от своих близких и друзей (стоило бы вам порадоваться, что я не пропустил звонки по рабочим вопросам).
5.0. Многие обладатели iPhone 5s и iPhone 5 жалуются на ухуджение работы аккумулятора. Я честно говоря этого не заметил, но не будем сбрасывать этого со счетов.
Итог.
А теперь встает довольно интересный вопрос, почему? Почему мой iPhone 5s стал тормозить? Почему при отсутствии графических улучшений абсолютно одни и те же действия стали воспроизводится с потерей fps, тормозить, лагать, зависать, вылетать? Почему если положить рядом iPhone 5s на iOS 7.1.2 и точно такой же iPhone 5s на iOS 8.0 и вытянуть панель управление, вызвать панель многозадачности, провести все остальные действия описанные мною то на устройстве под управлением iOS 7.1.2 все будет работать без каких либо задержек, лагов, ухудшение в отзывчивости интерфейса, уменьшении fps и просто без вылетов из приложений написанных непосредственно компанией Apple? Я не вижу абсолютно ни каких преград в том чтобы сделать так чтобы iPhone 5s под управлением операционной системой iOS 8.0 работал с той же плавностью, с той же отзывчивостью и скоростью, что и iPhone 5s под управлением iOS 7.1.2! Не вижу от того, что этих ограничений нет!
Есть еще множество различных багов о которых я сейчас даже не вспомню (так как этот текст я пишу на эмоциях (положительных) так как смог откатить свой iPhone 5s обратно на iOS 7.1.2 и он как будто ожил новой жизнью) и пока глубокоуважаемая мною компания APPLE не устранит эти не доработки я не буду возвращаться обратно на iOS 8.0! если устроения этих багов, недоработок, умышленного ухудшения работы (практически одинакового по производительности в сравнении с iPhone 6) IPhone 5s не произойдет и компания APPLE будет и дальше относиться к потребителям своей продукции как к бета тестерам я буду вынужден организовать петицию и подать коллективный иск в суд не только в своей стране (коей является Российская Федерация) но и в США и в других странах где людей так же как и меня пытаются обмануть, ввести в заблуждение и заставить покупать новые устройства компании APPLE не дав на то ни каких более существенных объяснений кроме как < iPhone 6 стал на 25% мощнее по с равнению с iPhone 5s>!
P.s.
Я надеюсь компания Apple все еще прислушивается к своим пользователям и я так же надеюсь, что она (Apple) все же одумается и постарается в ближайшее время дать пользователям не таких уж и старых устройств (iPhone 5s, iPad Air, iPad mini Retina) наслаждаться и дальше всеми новыми возможностями операционной системы iOS 8 без лагов, подвисаний, перегревов, заторможенной анимации. Спасибо, что вы есть!

Agreed! This bug with the ringtone delay (№4.1) is really annoying

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!

Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

Contacts error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Thanks! I looked at the Busycal post:
          To fix this, open System Preferences > Security & Privacy, select Contacts in the left sidebar, then check BusyCal.app.
On my system, only Skype, Parallels, and Contacts Cleaner are enabled to access contacts.
FYI, LinkedIn doesn't list any apps as having asked for, or been given access.
          If that doesn't work, here is a bigger hammer:
OK
          1) Launch Terminal in /Applications/Utilities.
          2) Paste the following text and hit return:
               tccutil reset AddressBook
First, I want to see what that does so I ran man tccutil
     NAME
          tccutil -- manage the privacy database
     SYNOPSIS
          tccutil command service
     DESCRIPTION
          The tccutil command manages the privacy database, which stores decisions the
          user has made about whether apps may access personal data.
          One command is current supported:
          reset    Reset all decisions for the specified service, causing apps to prompt
                   again the next time they access the service.
     EXAMPLES
          To reset all decisions about whether apps may access the address book:
                tccutil reset AddressBook
          3) Quit Terminal.
          4) Launch BusyCal, and click OK when asked whether to allow access to your contacts.
Now I see under System Preferences->Security&Privacy->Privacy->Contacts that all apps were removed from the list.
I haven't had BusyCal in years so I just launched Calendar and Contacts.
Unfortunately, as soon as I launch Contacts, I get the pop-up again about the LinkedIn

The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server ...

Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All access to the Oracle tables takes place via views in the SQL Server database that go against Oracle tables in the linked server.
(With regard to DTC config: Checked-> Network DTC Access, Allow Remote Clients, Allow Inbound, Allow Outbound, Mutual Authentication (tried all 3 options), Enable XA Transactions and Enable SNA LU 6.2 Transactions. DTC logs in as NT AUTHORITY\NetworkService)
Our app is an ASP.NET MVC 4.0 app that calls into a number of WCF services to perform database work. Currently the web app and the WCF service share the same app pool (not sure if it's relevant, but just in case...)
Some of our services are transactional, others are not.
Each WCF service that is transactional has the following attribute on its interface:
[ServiceContract(SessionMode=SessionMode.Required)]
and the following attribute on the method signatures in the interface:
[TransactionFlow(TransactionFlowOption.Allowed)]
and the following attribute on every method implementations:
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
In my data access layer, all the transactional methods are set up as follows:
using (IDbConnection conn = DbTools.GetConnection(_configStr, _connStr))
using (IDbCommand cmd = DbTools.GetCommand(conn, "SET XACT_ABORT ON"))
cmd.ExecuteNonQuery();
using (IDbCommand cmd = DbTools.GetCommand(conn, sql))
... Perform actual database work ...
Services that are transactional call transactional DAL code. The idea was to keep the stuff that needs to be transactional (a few cases) separate from the stuff that doesn't need to be transactional (~95% of the cases).
There ought not be cases where transactional and non-transactional WCF methods are called from within a transaction (though I haven't verified this and this may be the cause of my problems. I'm not sure, which is part of why I'm asking here.)
As I mentioned before, in most cases, this all works fine.
Periodically, and I cannot identify what initiates it, I start getting errors. And once they start, pretty much everything starts failing for a while. Eventually things start working again. Not sure why... This is all in a test environment with a single user.
Sometimes the error is:
Unable to start a nested transaction for OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
This message, I'm guessing is happening when I have non-transactional stuff within transactions, as I'm not setting XACT_ABORT in the non-transactional code (that's totally doable, if that will fix my issue).
Most often, however, the error is this:
System.Data.SqlClient.SqlException (0x80131904): The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME" was unable to begin a distributed transaction.
Now, originally we only had transactions on SQL Server tables and that all worked fine. It wasn't until we added transaction support for some of the Oracle tables that things started failing. I know the Oracle transactions work. And as I said, most of the time, everything is just hunky dorey and then sometimes it starts failing and keeps failing for a while until it decides to stop failing and then it all works again.
I noticed that our transactions didn't seem to have a DistributedIdentifier set, so I added the EnsureDistributed() method from this blog post: http://www.make-awesome.com/2010/04/forcibly-creating-a-distributed-net-transaction/
Instead of a hardcoded Guid (which seemed to cause a lot of problems), I have it generating a new Guid for each transaction and that seems to work, but it has not fixed my problem. I'm wondering if the lack of a DistribuedIdentifier is indicative of some other underlying problem. I've never dealt with an environment quite like this before, so I'm not sure what is "normal".
I've also noticed that the DistributedIdentifier doesn't get passed to WCF. From the client, I have a DistributedIdentifier and a LocalIdentifier in Transaction.Current.TransactionInformation. In the WCF server, however there is only a LocalIdentifier set and it is a different Guid from the client side (which makes sense, but I would have expected the DistributedIdentifier to go across).
So I changed the wait the code above works and instead, on the WCF side, I call a method that calls Transaction.Current.EnlistDurable() with the DummyEnlistmentNotification class from the link above (though with a unique Guid for each transaction instead of the hardcoded guid in the link). I now havea DistributedIdentifier on the server-side, but it still doesn't fix the problem.
It appears that when I'm in the midst of transactions failing, even after I shut down IIS, I'm unable to get the DTC service to shutdown and restart. If I go into Component Services and change the security settings, for example, and hit Apply or OK, after a bit of a wait I get a dialgo that says, "Failed ot restart the MS DTC serivce. Please examine the eventlog for further details."
In the eventlog I get a series of events:
1 (from MSDTC): "The MS DTC service is stopping"
2 (From MSSQL$SQLEXPRESS): "The connection has been lost with Microsoft Distributed Transaction Coordinator (MS DTC). Recovery of any in-doubt distributed transactions
involving Microsoft Distributed Transaction Coordinator (MS DTC) will begin once the connection is re-established. This is an informational
message only. No user action is required."
-- Folowed by these 3 identical messages
3 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
4 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
5 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
6 (From MSDTC 2): MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1):
Allow Remote Administrator = 0,
Network Clients = 1,
Trasaction Manager Communication:
Allow Inbound Transactions = 1,
Allow Outbound Transactions = 1,
Transaction Internet Protocol (TIP) = 0,
Enable XA Transactions = 1,
Enable SNA LU 6.2 Transactions = 1,
MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService,
Firewall Exclusion Detected = 0
Transaction Bridge Installed = 0
Filtering Duplicate Events = 1
This makes me wonder if there's something maybe holding a transaction open somewhere?

The statement executed from the sql server. (Installed version sql server 2008 64 bit standard edition SP1 and oracle 11g 64 bit client), DTS enabled
Below is the actual sql statement issued
SET XACT_ABORT ON
BEGIN TRAN
insert into XXX..EUINTGR.UPLOAD_LWP ([ALTID]
          ,[GRANT_FROM],[GRANT_TO],[NO_OF_DAYS],[LEAVENAME],[LEAVEREASON],[FROMHALFTAG]
          ,[TOHALFTAG] ,[UNIT_USER],[UPLOAD_REF_NO],[STATUS],[LOGINID],[AVAILTYPE],[LV_REV_ENTRY])
          values('IS2755','2010-06-01',
'2010-06-01','.5',     'LWOP'     ,'PERSONAL'     ,'F',     'F',     'EUINTGR',
'20101',1,1,0,'ENTRY')
rollback TRAN
OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" was unable to begin a distributed transaction.
Able to execute the above statement successfully without using transaction.We need to run the statement with transaction.

Help with "The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36)" Any ideas on how to fix this?

While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written.(Error code -36)

I have a backup from Time machine of my iPhoto and I get the above error when I try to restore them. Thae backup was done with Mountain Lion and I upgraded to Mavericks. The backup is on an external drive.
Again this is the error:
The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written.(Error code -36)
I have also tried going to earlier dated backup and get the same error.
Any help would be greatly appreciated. Thank You

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

In Russia, the operator MTS (Mobile TeleSystems) launched LTE band 5 (850 MHz)

Similar Messages

Maybe you are looking for