In table, coloumn's data is repeating multiple times

Hello Everybody,
We have upgraded patch level of EP 7.0 from SP10 to SP17.We are using
VC 7.0 with Flex2 compliler and BI 7.0 SP19.
In Visual Composer we have developed a dashboard but We are facing some
issues related to table values.
In tables output data is coming from BI queries.
Now For a particular Business area 'A', Many Plant Names are coming in
Table output.For this Business Area same plant values are repeating many times in
table's column.
Like In a Table
Plant              MaterialType
kawas                         A
kawas                         B
kawas                         C
kawas                         D
Rihand                        A
Rihand                        C
Rihand                        R
Rihand                        F
Rihand                        T
Now we want to display the Repeated Values of Plant only one time for
multiple values of materil type.
Like
Plant             Material Type
kawas                          A
                                   B
                                   C
                                   D
Rihand                         A
                                   C
                                   R
                                   F
                                   T
Kindly help me out.
Thanks & Regards
Nivedita

Dear Basheer,
In BI query, table's out put is coming as per the requirement like coloumn data is not repeating many times in BI. But when i use same query in Visual Composer it shows repeated values.
Kindly suggest some solution.
Thanks & regards
Nivedita

Similar Messages

  • My address bar section repeats multiple times

    My address bar repeats multiple times.
    I have screen shot i would like to provide that will show my exact problem.
    == This happened ==
    Every time Firefox opened
    == Not sure

    Hello Scott.
    Please upload a screenshot, if it's possible.
    In any case, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • Help writing HTML formatted data to JEditorPane multiple times

    I have problems writing data to a JEditorPane more than once. The first time, it works, but the 2nd, 3rd, and so on, the data that is displayed is corrupt. This is where I print the data:
                   ResultsDisplay.getEditorKit().createDefaultDocument();
                   ResultsDisplay.setText(inputStore.toString());There seems to be something wrong with the way I display the data. What do I have to do to change HTML formated data that is printed to an JEditorPane?
    This is how I set up the JEditorPane:
         javax.swing.JEditorPane ResultsDisplay = new javax.swing.JEditorPane();
         JScrollPane ResultsDisplayScrollPlane = new JScrollPane(ResultsDisplay);
         HTMLEditorKit htmlEdKit = new HTMLEditorKit();and
              ResultsDisplay.setEditable(false);
              ResultsDisplay.setEditorKit(htmlEdKit);
              ResultsDisplay.setContentType("text/html");
              ResultsDisplay.setEditorKitForContentType("text/html", htmlEdKit);
              getContentPane().add(ResultsDisplayScrollPlane);
              ResultsDisplayScrollPlane.setBounds(50,50,700,450);Am I doing anything wrong here? Why can I only write the data once during the Applet's run life?

    Hi again,
    Does anyone have experience writing to a JEditorPane multiple times during the run-life of a Applet? When I first send the data, it is displayed correctly. But everytime after that, the data is corrupted. My data is written in tables (in HTML format). The second time I write to the JEditorPane, it only displays the first of my tables, and only displays the collumn names and in the last column it displays the first row of data squeezed into the last column name's cell. If I run a third time, it takes this old table and adds a new table from the third run. With the fourth run I end up with 3 tables each containing only one row with the column names and the 1st row of data squeezed into the last collumn name cell.
    Can anyone help? I've already tried creating a new document as described in the JEditorPane's API.

  • Mac Mail - recipient's address repeated multiple times

    Sometimes when replying to email messages from a particular client of mine, the address in the "To:" frame is repeated three times. Any idea what causes this? I've seen it happen similarly with the address repeated twice. It happens whenever I'm responding to any person from the same company. It doesn't happen to all my replies, just ones going to one particular company. For example, I get a message from "[email protected]" and when I reply, the message window pops open and has "[email protected]> <[email protected] <[email protected]>" in the "To:" frame. Note that this is entirely encapsulated in one blue oval shape. I noticed that in my message browser window, the address is repeated twice in the "From" column.
    My concern is that the person might be getting my message three times, which would be annoying. Or, is it just going out once because it is in one blue oval? I can look back in my history and see that this stated happening on a specific date (almost two years ago). Perhaps it was when I changed my OS or maybe it was a change on my clients mail system?
    Thanks

    Csound1 wrote:
    2 smtp servers, each with the correct credentials for 1 account.
    So it simply won't do to send outgoing messages through the same smtp server? I thought I could do that when I was still using Thunderbird as my e-mail client under OS X rather than Mac Mail.

  • Orchestration Instance - message data being inserted multiple times to database

    Hello,
    I have a Transactional Scope orchestration which has an expression shape which writes unique messages to a custom database using helper - ADO.Net. We are noticing that when the BizTalk server (BTS 2009) is under stress few messages are
    getting inserted multiple times. On further researching we have narrowed down the cause to be that when there is a delay in ADO.NET insert command completion, the orchestration engine wait threshhold is met and decides to dehydrate. But if around
    the same time the ADO.NET insert completes and then after some time orchestration rehydrates and resumes from last persistence point, it inserts the message again causing the duplicates. Has anyone seen such behavior?
    Thanks in Advance!

    Yeah, we knew only other alternative is to use the WCF-SQL Adapter and include in Orchestration transaction - saw this pattern somewhere, do not want to use atomic scopes as it could lead to blocking. I'm sure there are several implementations out there
    that user helper classes to do DB insert/updates and should have seen a similar issue.
    I just want to make sure we are not missing something here. I strongly feel Microsoft BizTalk team should clearly state in their documentation that helper DB insert/updates should be avoided or put it in their best practices so that developers
    dont have to figure this out the hard way.
    Thanks!
    You may try to call helper class from map inside Receive/send port using XSLT templates. Then you don't have to worry about orch. And in send port advanced properties you can set re-try to '0' so it doesn't try again 3 times. Either it fails first go and completes
    once.

  • Creating a Price in 1 table, determined by data contained in multiple other tables.

    Hi
    I'm trying to construct a quote tool for my resellers and partners. My software product has a different selling price determined by the licence type, licence size and some vertical market positioning.
    In my example, if my partner ticks the box for "Annual Subscription" and "1 Year", I'd like "Licence Cost" in the table below to present the 1 Year Licnce Price from the table on the top right.
    And if they choose "Lifetime Licence" then it should lookup the licence cost under the LifeTime table on the bottom right.
    I've tried using IF and LookUp but got tied up in all sorts of mess when trying to nest multiple functions referencing multiple tables, any help you can offer is gratefully received.
    Thank you.

    Hi Jerry
    Thanks for your explanation.
    So the logic / workflow is as follows:
    Partner should tick the boxes that pertain to the licence the customer wants to buy (Box 1 below).
    Box 1 should look up the price for the required licence in Box 2, in this case a 2 year subscription (I've removed lifetime licences for now). So the selection from Box 1 should find the following in Box 2 below:
    The combination of criteria selected from Box 1, and the prices in Box 2 should then return the price to quote to the customer in box 3, as below:
    I've simplified the spreadsheet in this example to hopefully help you understand my logic. The reality is we have hundreds of prices as we have multiple licence variants, as well as sector and vertical pricing. Therefore if I can figure out how to get this initial step working, I should be able to take it from there.
    I don't really understand your comment about redundancy, I initially started with a pop-up but couldn;t figure out how to make the other cells respond, so I broke the pop up options into tick boxes. If you have a simplified method of achieving just this step above, I'm completely happy to change my (potentially flawed) methodology.
    Thanks once again!
    Drew
    Message was edited by: The_Drew

  • Creating a slide show...one image repeats multiple time throughout?

    to create a slide show I am dragging a soundtrack onto the new sequence icon...importing 117 jpeg images selecting them and choosing 'automate to sequence'...
    however, one of the jpeg images is being repeated throughout the sequence, over and over again...
    What am I doing wrong...i've even deleted the image from the source import file...and it just haunts me...
    Any assistance would be greatly appreciated.

    What version of PrPro do you have?
    There was a glitch with PSD's, in CS 5, and then CS 5.5, but that was supposedly corrected in the latest CS 5.5 update.
    Until then, the workflow, that Stephen_Spider suggested should work fine. You can create an Action to Open, then Save, and Automate>To Batch, for that, to correct an entire folder at a time.
    Good luck,
    Hunt

  • Why is my data usage increasing multiple times a day when I'm on wi-fi?

    For both myself on the Samsung Galaxy S4 and my girlfriend on an iPhone 5c, both of which we got just a week ago, we see our data usage total increasing several times a day, typically in very small amounts, occasionally larger.  Her increases are about 10x larger than mine overall.  All of this happens when we're each on wi-fi so I wouldn't expect to see these increases then.  Any idea why this is happening and what I can do to prevent it?  I'm guessing it may be some sort of auto update processing happening in the background, but I don't know that for sure and don't know what else could be causing this.

    After talking to 4 different Verizon reps today, nobody could pinpoint the
    cause of this.  I was mostly just told not to worry about it.  My wifi has
    seemingly been very solid both here and at work; I don't notice dropouts
    when I'm doing other things on it.  But I did disable mobile data on the S4
    and observed that the data usage did not increase any further after I did
    that.  So I guess I'll either use that as my primary mode of operation, and
    just manually reenable it when I know I'll be away from a wifi signal, or
    turn mobile data back on and live with the ongoing hits until it becomes a
    storage issue.  At the rate we're using data thus far, that shouldn't
    happen.
    On Sat, Mar 8, 2014 at 12:37 PM, Verizon Wireless Customer Support <

  • One email keeps repeating multiple times all day

    In my mac.com mail account I have been receiving one specific email over and over again. How can I get rid of it forever?

    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy / paste:   ~/Library/Caches/com.apple.Safari
    Click Go then move the Cache.db file from the com.apple.Safari folder to the Trash.
    Try Safari.

  • Repeating the same region multiple times

    Hi,
    We have requirement where the same region gets repeated multiple times depending on the data.
    Functionally: QA -- Question Area , it has couple of questions
    Supplier1 has 1 QA assigned . Then in the page it gets displayed as
    - QA { ShowdetailHeader }
    -- Questions { tree table}
    Now that if Supplier1 is assigned with 3 QA's then
    - QA1
    -- Questions of QA1
    - QA2
    -- Questions of QA2
    - QA3
    -- Questions of QA3
    i.e the regions to be displayed will depend on the data.
    ================================
    To explain the same tech...
    We have the following requirement { Consider 2 VO's and a VL between them }. In the page we display it in this manner
    <showdetialHeader VO1>
    < Tree table VO2 >
    This region will be repeated depending on the result of VO1. That is say VO1 returns 3 rows then it should be displayed as
    <showdetialHeader VO1.row1>
    < Tree table VO2 [VO1.row1] >
    <showdetialHeader VO1.row2>
    < Tree table VO2 [VO1.row2]>
    <showdetialHeader VO1.row3>
    < Tree table VO2 [VO1.row3]>
    =========================================================
    Please guide me in I building this page.
    Thanks,
    Suresh.
    Edited by: user758041 on Dec 27, 2010 3:11 AM

    Hi,
    JDeveloper 11g does not yet support dynamical creation of ADF Region instances. So any attempt to create a region in an af:forEach or af:iterator loop wont work.
    Frank

  • Need to use Value of End Date Prompt Multiple Times

    I have a date field (Ex: Tablename.RDate) that needs to be entered by the user. So, I created a prompt (Begin and End Dates) that the user will enter.
    I need to have a second date field (Ex: Tablename.TDate) that needs to use the entered value of the End Date from the first prompt.
    (I need to check for TDate being equal to or greater than the value entered in the RDate End Date prompt. I don't want the client to enter in a begin and an ending date and then have to turn around and enter in a termination date which would be the same as the ending date).
    So my question is how do I accomplish this without having a TDate prompt? How can I use the RDate Entered Ending Date prompt value multiple times in my report?
    I thought about a second prompt but I don't know how to direct it to the entered value for the 'End Date'. I am fairly new at this so please go slow and be detailed with your answer if you can. Thanks in advance

    I think you have to make use of an exit (EXIT_SAPLMEKO_002)  or a BADI (ME_PO_PRICING_CUST)

  • DB Adapter repeating first child record multiple times

    We are using DB Apdater in BPEL process with master and child relationship setup using wizard. Correct XSD is generated. However when we execute webservice, 1st child record is repeated multiple times (based on total child records) Other child records are not showing in XML.
    We are facing this issue in both 11.1.1.7.0 and 12c

    Hi Mahesh,
    Can you post your xsd and the sample xml which you got as output. Also, explain what is your expectation in the output.
    Regards,
    Sai

  • Reg: Data getting repeated in the table and displayed in the Smartorm.

    Hello Experts,
    Requirement is to display header data from kna1table and item data from two tables faglflexa and bsid.
    Layout is something like this.
    Name and Address is capture from KNA1.
    Item Details from faglflexa and BSID based on one condition, UMSKZ ne 'X' and 'Y' for the respective KUNNR from KNA1.       First Item table.I have taken a separate internal table from print program
    Item Details from BSID only based on one condition, UMSKZ eq 'X' and 'Y' for the respective KUNNR from KNA1. Second Item table. I have taken a separate internal table from print program
    Calculation based on faglflexa and BSID table on one condition,UMSKZ ne 'X' and 'Y' for the respective KUNNR from KNA1.       Third t Item table. Data from the first internal table
    The complete thing should be displayed on Smartform for one Customer (kunnr). Then should go to the next customer.
    I have a written a code like this, For Example.
    loop at kna1 into w_kna1.
    Used Table1 in smartform and give a loop to display the item details based on first internal table.
    display itemdetails
    Used Table2 in smartform and give a loop to display the item details based on second internal table.
    display itemdetails.
    Used Template to display the item details to display the item details based on first internal table.
    endloop.
    Now my problem is table 1 is coming fine. table 2 data is getting repeated for all the customers based on 1st customer data, how should i clear the workarea after every customer.
    Similar pbm for the template which i'm using.
    Please help me on this.
    Thanks in advance.
    Abdur Rafique

    Hi Vishnu,
    Thanks for replying. I cant use one single table to display the output. There are several conditions in two tables.
    I have corrected the error of repetition data. Logic i will mention it below.
    loop at kna1 into wa_kna1.
    for header data " this is main table
    loop at item_1  into wa_item_1. " for first item table
    Data displayed.
    loop at item_2 into wa_item_2. " for 2nd item table
    Data displayed.
    endloop. " for 2nd item table
    data calculation based on first item table.
    endloop. " this is for first item table
    endloop." this is for 2nd item table.
    The data which is there in the 2nd item table should display data based on the kna1 loop. Data is displaying properly but not in 1 table, say for example.
    kunnr- 1000010
    there are 9 items.
    All the 9 items should be in 1 table. But here it is displaying 1 item in 1 table till 9 items in 9 tables.
    I need to club all the 9 items in 1 table.
    One more doubt is 2 items have same belnr (document number) i need to club this and add the wmbtr field and then display as 1 record.
    So final records in 2nd item table should be 8 not 9.
    Can you please help me on this.
    Thanks in advance.
    Abdur Rafique

  • In smartform table data is repeating

    in smartform table, data is repeating and filling the page...
    actual data is only 3 rows...
    but it repeats and fills the page...how can i stop this...

    Hi Rajkamal
    You can easily debug the smartform; try hardcoding the break-point for your user ID.  (Break <ID>)
    Please check the number of entries in your table.
    If the number of entries are correct it can be only some loop in smartform - happy hunting !!
    Neer

  • Data Federator:  Unioning Multiple Tables into single view possible?

    Hi,
    I have three different databases with tables containing a portion of the same kind of data and I want to union the three different tables together in Data Federator to present a single logical view that has the complete set of data.  Is this possible in Data Federator?  How would I go about doing that?
    Note: I do not have keys to join the tables together on since it's not simply extending the data in one table with additional data in another table and doing an inner join on a unique key.  Instead, for example, there's a customer table for Finance, a customer table for Operations and a customer table for Sales and they all contain the same columns (with maybe slightly different names) and same type of data.  I want to effectively union Finance, Operations and Sales together in a federated/virtualized view so applications can just query from that view to get all the customers from the three different databases.
    I have been unable to do this so far since Data Federator requires each table in a mapping to have a relationship with the other tables in the mapping.
    Thanks for the help.
    Kerby

    I figured out the original question using one mapping for each table but have a new question now. 
    Is it possible for an application to use the combined view from Data Federator to write back into the databases?
    e.g. have an application use the target table in Data Federator and view the results, and based on that update the data in the underlying database that provides the data for the target table?
    Thanks for the help.
    Kerby

Maybe you are looking for