Despite using "USER_EXIT" command, getting an empty report when ran the concurrent program.

Hi,
    In my report I am using "OE_ORDER_HEADERS_V" view in my data group query. This view is operating unit(OU) specific so, i am using "USER_EXIT" commands in before report and after report triggers correctly.
Despite making above two setups when i ran my concurrent program from front end getting an empty report.
Please help in fixing this.
Thanks
Sandeep.G

Hi All,
          Solved the issue !!!
Reason: I am writing report for custom application(XXKES) where i diddn't checked my profile(mo: Operating Unit).
which is 912.
And my OM responsibility is in 204 OU so, this is resolved by changing the OU profile of my custom application to 204.
Next you do this on custom app. make sure your all other coordinating apps are also having same OU profile.
Regards
Sandeep.G

Similar Messages

  • Empty Report when field Value is a multiplier of 256

    Good morning from South-Tyrol, Italy!
    I got a strange behavior of Crystal Reports XI R2 SP5: two tables are combined with an Left Inner Join through an long integer field (the number of the header record of a document and the singles lines of the same document). Now I get an empty report, when the number of the document is 256, 512, 768, 1024  and so on! All other documents are viewed in the right matter.
    I'm using the native connection to an Pervasive database (PervasiveSQL 2000i) but the same behavior will happen when I change to ODBC.
    With Crystal Reports XI SP4 this problem not occured; I upgraded my application just this weekend!
    Thank you for help!
    Jens Ferstl

    Hi again,
    Only for completeness: the problem isn't restricted to the tables described above: always when a table is connected to anther trough an integer (with key) data's arn't retrieved (or displayed).
    Dear Don, did you find the origin of the problem? I'm would like to upgrade my application to CrXI R2 because this version resolves a important problem I have with CrXI (application crashes) and need to plan times.
    Thank you,
    Jens

  • When I sync with my iphone i get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage.  How do I turn this message off?.

    Question: 
    When I sync with my iphone I get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open.  This continues until I quit Entourage.  How do I turn this message off? It interferes with any other work I am doing.   I appreciate any suggestions.

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • The Concurrent Program Error (Report)

    Hi,
    I am new to apps.
    Here i have created the sample report,
    the query is very simple
    select
    h.Segment1,
    h.creation_date,
    h.vendor_id,
    h.currency_code,
    s.vendor_name,
    l.line_num,
    l.item_id ,
    l.item_description,
    l.unit_meas_lookup_code,
    l.quantity,
    l.unit_price,
    Nvl(l.quantity,0)* Nvl(l.unit_price ,0) total
    from po_headers_all h,
         po_lines_all l,
         Ap_suppliers S
    where h.PO_HEADER_ID = l.PO_HEADER_ID
      and h.VENDOR_ID = s.VENDOR_ID
      and h.org_id = fnd_profile.value('ORG_ID')
      and H.Segment1 = :P_po_numberThe above query in report is call 'G-Segment1'. In which i add a formula column called CF_net_value,
    The reason to add the formula column is that i need to format currency using fnd format_currency
    so i add the following code in the formula column .
    function CF_Net_valueFormula return Number is
    begin
      srw.reference(:Currency);
      srw.reference(:total);
      srw.user_exit('FND FORMAT_CURRENCY
                   CODE=":Currency"
                   DISPLAY_WIDTH="15"
                   AMOUNT=":TOTAL"
                   DISPLAY=":Cf_net_value"
      Return(:cf_net_value);              
    end;In RTF template i am using the CF_net_value to display the Total (i think that will be formatted one).
    After the report deployment and run the concurrent program i am receive the following error.
    REP-1416: '': User exit 'G_Segment1'. .
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1416: '': User exit 'G_Segment1'. Please help me in this struggle.
    Thanks & Regards,
    Kanish

    Please post the details of the application release, database version and OS along with the developer version you are using.
    Please see if old threads help -- https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Report runs OK through concurrent program, but not when called through URL

    We have a custom 6i report developed that works successfully 100% of the time when run through a concurrent program.
    We are now attempting to integrate this into an OAF application. To do this, we build the necessary call to the reports server by reading different profile options, etc and come up with a URL like this:
    http://ebsd777.xxxxx.com:8000/dev60cgi/rwcgi60?d777_APPS+report=XXMFG_ESPEC_REPORT.rdf+P_SPEC_ID=43+DESFORMAT=PDF
    This report works 90% of the time when called like this, but the other 10%, we get the following error:
    "Error: The requested URL was not found, or cannot be served at this time.
    Incorrect usage."
    Trying to find what the differences are between the reports that work and those that don't - found that reports which fail seem to extend out further to the right than the reports that do work. But, these reports still fit on standard letter paper in landscape format - as we can verify through the concurrent program call.
    Is there some sort of report server setting or parameter which we can change to get this to work when called through the reports server URL?
    Any thoughts would be appreciated!
    Thanks,
    Craig

    Hi,
    Please post the application release along with the database version and OS.
    But when i call the same program through the pl/sql executable of another concurrent program , it does not print the pdf output by defaultHow do you call the program? What is the value of the number of copies profile option?
    Please see if these docs help.
    Note: 757901.1 - How To Restrict The Number Of Copies To 1?
    Note: 729117.1 - How To Specify the Number of Copies to Print by Report?
    Thanks,
    Hussein

  • Emails get sent in Mail when pressing the space bar whilst spell checking

    Why do emails get sent in Mail when pressing the space bar whilst spell checking ?? This is beyond annoying. It's been happening for ages on my MBP. I have seen others complain and I can't understadn why this simple bug has not been fixed. Any help on this would be very much appreciated. thank you.

    Hi
    In composing I have Check Spelling "when I click send" selected. I tried on my iMac, my Mail account is sync'd via iCloud etc.. I got the same thing, when you hit send and review your spelling, I need to do that a lot, as well as insert missing words. As soon as you hit the space bar off goes the email. I have seen others complain of this on the google. I have now switched to check as I type but when i make a typo Mail just puts a red line under the word, it doesn't open up the Spell Checker dialog.
    Is there away of resetting my Mail Apps database ? MAybe something is corrupt.
    thanks.

  • I keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

    i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

    The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
    This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

  • I get errors When running the example programs SampleMetadataDiscoverer10g

    I installed database is 10g release 2 on Windows XP,and AWM version is 102010A.
    When running the example programs SampleMetadataDiscoverer10g.java to get the OLAP metadata,I get the following errors:
    oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-37158: CLOB 或可变数组输入参数错误: (情形 6)
    ORA-06512: 在 "SYS.GENSERVERINTERFACE", line 46
    ORA-06512: 在 line 1
    at oracle.express.idl.ExpressConnectionModule.ServerInterfaceStub.connect(ServerInterfaceStub.java:694)
    at oracle.express.olapi.data.full.ExpressDataProvider.connect(ExpressDataProvider.java:436)
    at oracle.express.olapi.data.full.ExpressDataProvider.initialize(ExpressDataProvider.java:282)
    at oracle.olapi.examples.chapter4.MyConnection10g.connectToDB(MyConnection10g.java:126)
    at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.initialize(SampleMetadataDiscoverer10g.java:57)
    at oracle.olapi.examples.BaseExample.execute(BaseExample.java:32)
    at oracle.olapi.examples.BaseExample.execute(BaseExample.java:46)
    at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.main(SampleMetadataDiscoverer10g.java:44)
    Closing JDBC connection.
    Closed the connection.
    please..can someone give me some advice? thanks!

    I got the same error while doing "dp.initialize()"
    I fixed this error by chang the the "olap_api.jar class12.jar" to "o4j.jar".
    But i can't explain that.
    Can anyone tell me why?
    By the way , the "olap_api.jar class12.jar" are copy from the %ORACLE_HOME%\10.2.0\db_1\olap\api\lib .

  • I am getting error message A12E5 when installing the free 30 day trial for InDesign why?

    I am getting error message A12E5 when installing the free 30 day trial for inDesign...don't know why?

    don't know why?
    Neitehr do we. You are not offering any relevant technical info like what computer you are actually on or the exact error message.
    Mylenium

  • I use an iPad 3 with IOS6. When opening the calendar and strolling to march 2013, calender always shuts down.

    I use an iPad 3 with IOS6. When opening the calendar and strolling to MARCH 2013 calender shuts down...
    Anybody with same problem or having a solution?

    Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving.

  • Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

    Not able to extract  performance data from .ETL file using xperf commands.
    Xperf Commands:
    xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv  –a process
    Getting following error after executing above command:
    "33288636 Events were lost
    in this trace. 
    Data may be unreliable
    This is usually caused
    by insufficient disk bandwidth for ETW lo
    gging.
    Please try increasing the minimum
    and maximum number of buffers
    and/or
                    the buffer size. 
    Doubling these values would be a good first at
    tempt.
    Please note, though, that
    this action increases the amount of me
    mory
                    reserved
    for ETW buffers, increasing memory pressure on your sce
    nario.
    See "xperf -help start"
    for the associated command line options."
    I changed page size file but its does not work for me.
    Any one have idea, how to solve this problem and extract ETL file data.

    I want to mention one point here. I have total 4 machines out of these 3 machines above
    commands working properly. Only one machine has this problem.<o:p></o:p>
    Hi,
    I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
    Refer to following articles:
    start
    http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
    Using Xperf to take a Trace (updated)
    http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
    Kate Li
    TechNet Community Support

  • TS5376 i GET THIS ERROR REPORT WHEN ITRY TO UNINSTALL  ITUNES FROM MY COMPUTER   . . THE FEATURE YOU ARE TRYING TO USE IS ON A NETWORK RESOURCE THAT IS UNAVAILABLE   . I NOW CANT OPEN OR USE ITUNES AT ALL

    When i try to uninstall itunes to enable me to reinstall i get this message . the feature you are trying to use is on a network that is unavailable .( 'itunes msi'   is the resource i cant find )  i now cant open or update itunes any ideas

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Getting run time error when accessing the file from frontend server using F4.....?

    Category               ABAP Programming Error
    Runtime Errors         CONVT_NO_NUMBER
    Except.                CX_SY_CONVERSION_NO_NUMBER
    ABAP Program           ZMM_MIGO_GOODS_ISSUE
    Application Component  Not assigned
    Date and Time          26.05.2014 14:28:30
    Short Text
         "C:\Users\SAP\Desktop\MIGO\MIGO.xlsx" cannot be interpreted as a number
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "ZMM_MIGO_GOODS_ISSUE" had to be terminated because
          it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception has occurred which is explained in more detail below. The
         exception is assigned to class 'CX_SY_CONVERSION_NO_NUMBER' and was not caught
          in procedure
         "%_SEL_SCREEN_P_FNAME_V" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated this

    HI CHIRUI,
    I have changed and tried but still i a getting the same thing..
    otherwise please check this i am using some class method i am not getting short dump,but excel file is not getting uploaded.
    REPORT ZMM_MIGO_GOODS_ISSUE NO STANDARD PAGE HEADING.
    DATA : BEGIN OF IT_DATA OCCURS 0,
             ID(10),
             BLDAT(10),                             " Document Date
             BUDAT(10),                             " Posting Date
             REF_DOC_NO(16),                        " Material Slip No
             DEL_NOTE(16),                          " delivery note
             MATNR TYPE MSEG-MATNR,                 " Material Number
             ERFMG(13) TYPE C,                      " Quantity
             BWART TYPE RM07M-BWARTWA,              " Movement Type
             SOBKZ(1),                              " Special Stock
             WERKS TYPE RM07M-WERKS,                " Plant
             LGORT TYPE RM07M-LGORT,                " Storage Location
             PS_POSID TYPE PS_POSID,                " WBS Element
             COST_CENTER TYPE KOSTL,                " cost center
             ORDER TYPE AUFNR,                      " order number
             SERNR TYPE RIPW0-SERNR,                " Serial Number
            END OF IT_DATA,
            BEGIN OF IT_HEAD OCCURS 0,
              ID(10),
              BLDAT(10),                            " Document Date
              BUDAT(10),                            " Posting Date
              REF_DOC_NO(16),                       " Reference document number
              "HEADER_TXT(25),                       " Header Text
              BWART TYPE RM07M-BWARTWA,             " Movement Type
            END OF IT_HEAD,
            BEGIN OF IT_ITEM OCCURS 0,
              ID(10),
              "ID1(10),
              WERKS TYPE RM07M-WERKS,               " Plant
              LGORT TYPE RM07M-LGORT,               " Storage Location
              VAL_TYPE TYPE BWTAR_D,
              MATNR TYPE MSEG-MATNR,                " Material Number
              ERFMG(13) TYPE C,                     " Quantity
              CHARG TYPE MSEG-CHARG,                " Batch
              BWTAR TYPE BWTAR_D,
              PS_POSID TYPE PS_POSID,                 " WBS Element
              ERFME TYPE MSEG-ERFME,                  " Unit
              COST_CENTER TYPE KOSTL,                " cost center
              ORDER TYPE AUFNR,                      " order number
              CUSTOMER TYPE EKUNN,                    " Account Number of Customer
              SERNR TYPE RIPW0-SERNR,                 " Serial Number
              AMOUNT_LC TYPE BAPI_EXBWR,
              SOBKZ(1),
            END OF IT_ITEM,
              HEADER   LIKE BAPI2017_GM_HEAD_01,
              CODE     LIKE BAPI2017_GM_CODE,
              ITEMS    LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
              SERIAL   LIKE BAPI2017_GM_SERIALNUMBER OCCURS 0 WITH HEADER LINE,
              RETURN   LIKE BAPI2017_GM_HEAD_RET,
              RET      LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
              TESTRUN  LIKE BAPI2017_GM_GEN-TESTRUN,
              IT_TAB   TYPE FILETABLE,
              GD_SUBRC TYPE I,
              L_FILE   TYPE RLGRAP-FILENAME,
              IT_RAW   TYPE TRUXS_T_TEXT_DATA,
              COUNT(2) TYPE N,
              TEXT_C(30).
    DATA: DATA     LIKE TABLE OF IT_ITEM WITH HEADER LINE.
    DATA: IT_TEMP  LIKE TABLE OF IT_ITEM WITH HEADER LINE.
    DATA: IT_TEMP1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
    DATA: IT_ITEM1 LIKE TABLE OF IT_ITEM WITH HEADER LINE.
    SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.
    *             p_test AS CHECKBOX.
    SELECTION-SCREEN: END OF BLOCK B1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
       CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
         EXPORTING
           WINDOW_TITLE = 'SELECT FILE'
         CHANGING
           FILE_TABLE   = IT_TAB
           RC           = GD_SUBRC.
       READ TABLE IT_TAB INTO P_FILE INDEX 1.
    START-OF-SELECTION.
       PERFORM GET_EXCEL_DATA.
       PERFORM GET_HEADER_ITEM.
       PERFORM UPDATE_DATA.
    *&      Form  GET_EXCEL_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM GET_EXCEL_DATA .
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
           INPUT  = P_FILE
         IMPORTING
           OUTPUT = L_FILE.
       CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
         EXPORTING
           I_LINE_HEADER        = 'X'
           I_TAB_RAW_DATA       = IT_RAW
           I_FILENAME           = L_FILE
         TABLES
           I_TAB_CONVERTED_DATA = IT_DATA
         EXCEPTIONS
           CONVERSION_FAILED    = 1
           OTHERS               = 2.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
    ENDFORM. " GET_EXCEL_DATA
    *&      Form  GET_HEADER_ITEM
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM GET_HEADER_ITEM .
       DATA : FLAG(1).
       LOOP AT IT_DATA.
         CLEAR FLAG.
         IF IT_DATA-ID IS NOT INITIAL.
           AT NEW ID.
             FLAG = 'X'.
           ENDAT.
         ENDIF.
         IF FLAG = 'X'.
           MOVE-CORRESPONDING IT_DATA TO IT_HEAD.
           APPEND IT_HEAD.
         ENDIF.
         MOVE-CORRESPONDING IT_DATA TO IT_ITEM.
         APPEND IT_ITEM.
       ENDLOOP.
       DATA[] = IT_ITEM[].
       IT_TEMP[] = IT_ITEM[].
       IT_TEMP1[] = IT_ITEM[].
    ENDFORM. " GET_HEADER_ITEM
    *&      Form  UPDATE_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM UPDATE_DATA .
       DATA : COUNT1(10),
              L_QTY TYPE I,
              DAT(10).
       CONCATENATE SY-DATUM+6(2) '.' SY-DATUM+4(2) '.' SY-DATUM(4) INTO DAT.
       LOOP AT IT_HEAD.
         ON CHANGE OF IT_HEAD-ID.
           CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
             EXPORTING
               DATE_EXTERNAL       = IT_HEAD-BUDAT
               ACCEPT_INITIAL_DATE = 'X'
             IMPORTING
               DATE_INTERNAL       = HEADER-PSTNG_DATE.
           IF SY-SUBRC <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.
           CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
             EXPORTING
               DATE_EXTERNAL       = IT_HEAD-BLDAT
               ACCEPT_INITIAL_DATE = 'X'
             IMPORTING
               DATE_INTERNAL       = HEADER-DOC_DATE.
           IF SY-SUBRC <> 0.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.
           MOVE : '2'                TO HEADER-VER_GR_GI_SLIP,
                  'X'                TO HEADER-VER_GR_GI_SLIPX.
    *      IF r1 EQ 'X'.
           MOVE '05' TO CODE-GM_CODE.
           HEADER-REF_DOC_NO = IT_HEAD-REF_DOC_NO.
           "HEADER-HEADER_TXT = IT_HEAD-HEADER_TXT.
    *      ELSEIF r2 EQ 'X'.
    *        MOVE '04' TO code-gm_code.
    *      ELSEIF r3 EQ 'X'.
    *        MOVE '04' TO code-gm_code.
    *      ENDIF.
    *      IF p_test = 'X'.
    *        MOVE 'X' TO testrun.
    *      ENDIF.
         ENDON.
         IT_ITEM1[] = IT_ITEM[].
    *delete it_item[] where werks = '' and id = it_head-id.
         DELETE ADJACENT DUPLICATES FROM IT_ITEM COMPARING ID MATNR.
         LOOP AT IT_ITEM WHERE ID = IT_HEAD-ID.
    *      ON CHANGE OF it_item-id1.
           COUNT1 = COUNT1 + 1.
           CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = IT_ITEM-MATNR
             IMPORTING
               OUTPUT = ITEMS-MATERIAL.
           MOVE : IT_ITEM-WERKS TO ITEMS-PLANT,
                  IT_ITEM-LGORT TO ITEMS-STGE_LOC,
    *             it_item-lgort1 TO items-move_stloc,
                  IT_ITEM-CHARG TO ITEMS-BATCH,
    *            IT_ITEM-VAL_TYPE TO ITEMS-VAL_TYPE,
                  'FRESH' TO ITEMS-VAL_TYPE,
                  IT_HEAD-BWART TO ITEMS-MOVE_TYPE,
                  IT_ITEM-SOBKZ TO ITEMS-SPEC_STOCK,
                  IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
                  IT_ITEM-ERFMG TO ITEMS-ENTRY_QNT,
    *            it_item-erfme TO items-entry_uom,
    *            it_item-sgtxt TO items-item_text,
    *            it_item-exbwr TO items-amount_lc,
                  IT_ITEM-PS_POSID TO ITEMS-WBS_ELEM,
                  IT_ITEM-PS_POSID TO ITEMS-VAL_WBS_ELEM,
                  "IT_ITEM-CUSTOMER TO ITEMS-CUSTOMER,
                  IT_ITEM-ERFMG TO L_QTY,
                  IT_ITEM-AMOUNT_LC TO ITEMS-AMOUNT_LC,
                  IT_ITEM-COST_CENTER TO ITEMS-COSTCENTER,
                  IT_ITEM-ORDER TO ITEMS-ORDERID.
    *             items-SPEC_MVMT = 'R'.
           CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
             EXPORTING
               INPUT  = ITEMS-WBS_ELEM
             IMPORTING
               OUTPUT = ITEMS-WBS_ELEM.
           CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
             EXPORTING
               INPUT  = ITEMS-VAL_WBS_ELEM
             IMPORTING
               OUTPUT = ITEMS-VAL_WBS_ELEM.
    *      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    *        EXPORTING
    *          input  = it_item-lifnr
    *        IMPORTING
    *          output = items-vendor.
           APPEND ITEMS.
    *      ENDON.
         ENDLOOP.
         DELETE ADJACENT DUPLICATES FROM IT_TEMP COMPARING ID MATNR.
         DELETE IT_TEMP1 WHERE ID <> IT_HEAD-ID.
         DELETE IT_TEMP WHERE ID <> IT_HEAD-ID.
         DATA: MAT_ITM TYPE MBLPO,
               SERNP TYPE SERAIL.
         MAT_ITM = '0001'.
         LOOP AT IT_TEMP.
           SELECT SINGLE SERNP FROM MARC INTO SERNP WHERE MATNR = IT_TEMP-MATNR.
           IF SERNP IS NOT INITIAL.
             LOOP AT IT_TEMP1 WHERE ID = IT_TEMP-ID AND MATNR = IT_TEMP-MATNR.
    *    MOVE : it_item1-id TO serial-matdoc_itm,
    *     MOVE : mat_itm TO serial-matdoc_itm,
               SERIAL-MATDOC_ITM = MAT_ITM .
               SERIAL-SERIALNO   = IT_TEMP1-SERNR.
               APPEND SERIAL.
               CLEAR IT_ITEM1.
             ENDLOOP.
             MAT_ITM = MAT_ITM + 1.
           ENDIF.
           CLEAR IT_TEMP.
         ENDLOOP.
         CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
           EXPORTING
             GOODSMVT_HEADER       = HEADER
             GOODSMVT_CODE         = CODE
             TESTRUN               = TESTRUN
    *       GOODSMVT_REF_EWM      =
           IMPORTING
             GOODSMVT_HEADRET      = RETURN
    *       MATERIALDOCUMENT      =
    *       MATDOCUMENTYEAR       =
           TABLES
             GOODSMVT_ITEM         = ITEMS
             GOODSMVT_SERIALNUMBER = SERIAL
             RETURN                = RET
    *       GOODSMVT_SERV_PART_DATA =
    *       EXTENSIONIN           =
         CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
             WAIT = 'X'
    *   IMPORTING
    *       RETURN        =
         IF NOT RETURN IS INITIAL.
           WRITE :/ 'Material Document Number Generated: ' ,RETURN-MAT_DOC,RETURN-DOC_YEAR.
         ELSE.
           LOOP AT RET.
             WRITE : RET-TYPE,    RET-MESSAGE.
    *      log-index = sy-index.
    *      log-matnr = header-material.
    *      log-message = ret1-message.
    *      APPEND log.
           ENDLOOP.
         ENDIF.
         REFRESH : ITEMS,RET.
         CLEAR : HEADER,RETURN.
         CLEAR: TESTRUN  ,
                RETURN,
                ITEMS[],
                SERIAL[],
                RET[],
                HEADER,
                IT_TEMP[] ,
                IT_TEMP1[].
         IT_TEMP[] = DATA[].
         IT_TEMP1[] = DATA[].
       ENDLOOP.
    ENDFORM. " UPDATE_DATA
    Regards,
    Suresh bheema

  • For 2 wks get a crash report when I quit photoshop.  report sent whynothing fixed?

    for 2 weeks get a crash report everytime i quit photoshop.  crash report submitted everytime with details on when this happens yet nothing has been fixed.
    what is purpose of sending crash reports if they are ignored and problem continues?

    yet nothing has been fixed.
    Did you expect Adobe employees would come fix your computer?
    Boilerplate-text:
    Are Photoshop and OS fully updated?
    As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
    System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
    If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.
    Does turning off OpenGL in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    what is purpose of sending crash reports if they are ignored and problem continues?
    I suppose it helps Adobe keep track of the amount and nature of issues encountered by the users.
    These might then be addressed in a future update if the problem lies with the respective Adobe application (and it is not too complex) or if the problems lie with the OS or drivers the producers of those will hopefully be made aware of their bugs.
    And unless you provided your email-address Adobe employees would have little chance of getting back to you if it is a known and amendable problem.

  • How to get an empty form when we run the page?

    Hi all!
    Hope you are well
    My question is, how to get an empty form at run time? means when we run the page, text fields are filled with blank....Could anyone please help me with this..
    Thanks in advance,
    nanda.

    Hi Nanda,
    Just follow these steps:
    1) Create a bounded taskflow (uncheck the create with fragments checkbox)
    2) Drag the CreateInsert operation on your bounded taskflow and mark it as the default activity
    3) Drag a view and link the CreateInsert to the view component using a control flow case
    4) Double click on the view to create the page
    5) Drag the view object on the page as an ADF form
    6) Go back to your bounded taskflow and from the General tab make sure under visibitliy you select "url-invoke-allowed"
    Run you tasfklow and your form will be rendered in insert mode.
    Regards
    Antonis

Maybe you are looking for