In the DSP, get/set the data of SCXI1162 through Multifunction E series board

I am integrating DSP board(cPCI) with your scxi1162, pxi-1052, pxi-6040e.
For the configuration of scxi-1162, the sbc will do that and DSP read the data
through pxi-6040e. Can I do this ?
Because you made the driver for pxi-6040e with scxi-1162 and I can not see the source code,
It is difficult to make my own code for reading data of scxi-1162. Even though I made
and test the code according to the manual of scxi-1162, I can not success.
If you give one or two source code(just using the port) in all of the libraries,
I can make my own code on the DSP board easily.
Best Regards
Dongkue Ho

Hello Dongkue Ho,
Unfortunately, National Instruments does not provide any source code for its drivers.
For informtation concerning Register Level Programming with DSP, please see the NI Measurement Hardware Driver Development Kit (DDK) at http://sine.ni.com/nips/cds/view/p/lang/en/nid/11737 . This is the only support offered for RLP programming.
Regards,
Sean C.

Similar Messages

  • What is the need for setting property data inside the JMSMesage

    Hi
    Could anybody please let me know
    *What is the need for setting property data inside the JMSMesage??
    For example i have a seen a similar example as shown ??
    I have seen a
    Message.setStringProperty("Sport","Basketball");
    and also please tell me how can the MDB recievies this property data ??
    Thanks in advance .

    raviprivate wrote:
    Could anybody please let me know
    *What is the need for setting property data inside the JMSMesage??
    For example i have a seen a similar example as shown ??
    I have seen a
    Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
    >
    and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

  • [svn:fx-trunk] 11448: Making a small ItemRenderer change so that we don' t dispatch an unused, contentBackgroundColorChanged event anymore when the itemIndex gets set.

    Revision: 11448
    Author:   [email protected]
    Date:     2009-11-04 17:06:22 -0800 (Wed, 04 Nov 2009)
    Log Message:
    Making a small ItemRenderer change so that we don't dispatch an unused, contentBackgroundColorChanged event anymore when the itemIndex gets set.
    QE notes: -
    Doc notes: -
    Bugs: -
    Reviewer: Deepa
    Tests run: checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ItemRenderer .as

    Revision: 11448
    Author:   [email protected]
    Date:     2009-11-04 17:06:22 -0800 (Wed, 04 Nov 2009)
    Log Message:
    Making a small ItemRenderer change so that we don't dispatch an unused, contentBackgroundColorChanged event anymore when the itemIndex gets set.
    QE notes: -
    Doc notes: -
    Bugs: -
    Reviewer: Deepa
    Tests run: checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ItemRenderer .as

  • Updates are currently disallowed on GET requests. To allow updates on a GET, set the 'AllowUnsafeUpdates' property on SPWeb.

    Hi,
    I am getting the user PreferredName from user profile and trying to assign the value to column of type person/group as below
    lblPreferredName.Text = (profile["PreferredName"].Value).ToString();
    SPUser user = subSiteWeb.EnsureUser(lblPreferredName.Text);
      SPListItem itemToAdd = CurrentList.Items.Add();
    itemToAdd["Nominated"] = user.ID;
      subSiteWeb.AllowUnsafeUpdates = true;
    itemToAdd.Update();                                       
    subSiteWeb.AllowUnsafeUpdates = false;
    But i am getting the error as below.
    Plase correct me if i am wrong
    Updates are currently disallowed on GET requests.  To allow updates on a GET, set the 'AllowUnsafeUpdates' property on SPWeb.
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    Hi,
    So you are trying to save the SPUser value in the "Nominated" column.If yes then this code snippet will be helpful.
    using (SPSite site = new SPSite(SPContext.Current.Site.Url))
    using (SPWeb web = site.OpenWeb())
    SPUser userObj = SPContext.Current.Web.EnsureUser("Murugesan");
    SPFieldUserValue userValue = new SPFieldUserValue(SPContext.Current.Web, userObj.LoginName);
    SPList list = web.Lists["Project"];
    SPListItem item = list.Items.Add();
    item["Title"] = "Project-2";
    item["Manager"] = userValue;
    item.Update();
    Run this code with elevated privilege.
    Murugesa Pandian.,MCTS|App.Devleopment|Configure

  • Having trouble getting Skype to work.  It did when I first got the computer about a yr ago but then quit.  I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working.  Any suggestions?

    Having trouble getting Skype to work.  It did when I first got the computer about a yr ago but then quit.  I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working.  Any suggestions?

    all I can suggest is completley unistall as here
    https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x
    Then reinstall
    http://www.skype.com/en/download-skype/skype-for-mac/

  • What is the procedure to set the NLS_DATE_FORMAt in the database?

    what is the procedure to set the NLS_DATE_FORMAt in the database?

    Although why rely on the NLS_DATE_FORMAT anyway? Any date formats for display purposes should be tailored into the code of the application wherever you use TO_CHAR or the application has a "date" field that allows formats to be specified (depends on the GUI).

  • Error during PO Change-"Enter the price or set the 'Invoice Expected' indic

    Hi Gurus,
    I am facing this issue in the PO change. Whenever I try to change a PO and check ; system says" No error" but when I order it then I get this error "Enter the price or set the 'Invoice Expected' indicator " with a pop up "Complete Purchase order xxxx first or 'hold' the changes
    This happens for all the POs with any vendor.
    Regards
    Kapil

    Hi Kapil,
    We have got similar issue before while changing the P.O in change mode.
    This generally happens when the P.O is changed after the follow on documents has been created.
    In this case you can delete the change version and then amend the P.O without any issue.
    Generally the 'Delete' button gets disabled once the follow on documents get created but in this case the 'Delete' button would be active and clicking on 'Delete' button would delete only Chnage version and the P.O would be back to original ordered status.
    Please do the changes and let me know in case of any further clarifications.
    Regards,
    Teja

  • My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

    My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
    Erase and Install Snow Leopard
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. When completed quit DU and complete the Snow Leopard installation.

  • HT2954 My receive function on the email gets just the first email and then stops

    My receive function on the email gets just the first email and then stops, but the wheel keeps turning like it is looking.  What can I do to get it functioning again.  This program has been steady for several years so something in it is tweaked.  Other computers can access the account just fine.  If I shut down the mail program and start it up again it will get the same email and then go into the spinning mode again.  Is there a file I can delete to reset the account.  I have tried to re input the SMTP data but no luck.  Any Ideas?

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?

    My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?
    I don't want to have to restart or reinstall my iTunes again as I'll have to redo all my playlists etc

    Likely that CD then. Check visually for damage, blemishes, etc., not that there's anything you can really do about those other than return the CD.
    The drive sits there and spins because it is trying to re-read the CD.  iTunes has error correction which is contributing to all this re-reading, I believe, and you may be able to disable that in preferences if you aren't picky about the result.
    You can also try other rippers such as Max or XLD.  I know those have configurable error correction.  I like XLD but it is slightly tricky to use until you find that for some reason the author has put all settings under preferences, not just the set once and forget ones.

  • Why can't I just right click on the thumbnails and set the websites I want?

    I love the thumbnail idea, but why can't I just right click on the thumbnails and set the websites I want?
    Why do i have to wait for a recent one to come up?
    Of the 9 available, I would like to set 6 to website i can input by right clicking it and leave the rest for the recently visited.
    I ho[e you include that feature in your next update.
    Thank you
    P.S. 2 more issues
    1. Firefox is the only browser that always give me trouble attaching files in gmail. I still use firefox for all browsing but for mail attachments, I use others. And yes, I have done the "Clear cookies, reset, reinstall, clear cache, etc etc etc... none worked for more than a few days. no such problem with other browsers.
    2. Your new updated search bar (Top right hand corner) is nice but can be very irritating for the following reason:
    I like to highlight - copy (a word or phrase) - and paste it in the search bar. was fine with the older version, but now as soon as I right click to past, the menu pops up for me to select a search engine. Very irritating since I have yet to paste the copied word or phrase. I rather paste it and then have the option to click on the drop down menu. If you see this as not something masses would want, please place an option in setting for us to stop the suggestion for search engines coming up automatically when we try to right click in the side search bar to paste.

    You can change the order of the boxes on the about:newtab page and drag an item to a different tile to pin it to that position or you can remove a website by clicking the close X to block that URL.
    You can drag a bookmark or history item and drop them in a tile on the about:newtab page to pin them and have your own favorites sites showing.
    Changes made manually on the about:newtab page are stored in prefs that you can find on the about:config page.
    *browser.newtabpage.pinned stores websites that you have pinned to a tile.
    *browser.newtabpage.blocked stores websites that you have removed by clicking the X button in a tile.
    So you can reset those prefs via the right-click context menu to reset changes made to the about:newtab page.
    *http://kb.mozillazine.org/about:config

  • Singleton class for logging in the application, and setting the flag

    Hi Friends,
    I have a singleton class for logging in the application, and setting the flag once logged. can some one help me in doing this.
    with regards,

    rtfm, for example here - http://www.javacamp.org/designPattern/

  • Can anyone tell me how to remove the owner when setting the location

    Hello,
    Can anyone tell me how to remove the owner when setting the location?
    Properties
       Table Name:  (Table Name)
       Table Type:   Tables
       Owner:           Public
       Overridden Qualified Table Name:  (Table Name - same as above)
    Any help would be appreciated.
    Thanks
    Ann

    Hi Ann,
    please check this document to determine the correct space for your question:
    Find Topic Spaces on SCN (Forums)
    If you need help moving it, let me know!
    Thanks,
    Kristen

  • TS3899 I have deleted and added my hotmail account on the ios device yet it keeps giving me the "Cannot Get Mail" "The connection to the server failed"

    I have deleted and added my hotmail account on the ios device yet it keeps giving me the "Cannot Get Mail" "The connection to the server failed"

    Hotmail has been having problems with mobile devices for several days now. It's not a problem with your phone.

  • Trying to install yosemite from lion 10.7.5-when the install gets to the restart it never actually restarts, just gives an error and says try again

    trying to install yosemite from lion 10.7.5…when the install gets to the restart it never actually restarts, just gives an error and says try again

    Restart the computer manually.

Maybe you are looking for