In the view of Web Dynpro- "Page cannot be displayed screen"
Dear All,
In se80,During ABAP Webdynpro development,in the View "Page cannot be displayed screen" is appearing.....In SICF i have activated almost all services.....can anyone please help me out,so that i can develop webdynpros plsssss...........
Regards
Sajid
Edited by: shaik sajid on Feb 10, 2009 7:32 AM
Check Your internet Explorer connection settings Internet Option->Connection->LAN settings.
Try playing around with it. We had the same problem in the past.
Greetings
Prashant
P.S- Points welcome
Similar Messages
-
WEB Dynpro :- page cannot be displayed .
Hi All,
I am trying to work with the tutorials on the net for web dynpro. But I get the erroes below on all the serever we have. _____________________________________----While trying to retrieve the URL: http://gbdci550.us.panasonic.com:8011/sap/public/myssocntl?sap-client=800
The following error was encountered:
Unable to determine IP address from host name for gbdci550.in.ibm.com
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
Now if I go to lan settings on internet explorere and change the lan settings as below: -
*Do not use proxy address begining with us.panasonic.com..
Then the error changes to as below. Please help me with the settings that I need to do .
The page cannot be displayed
Click the Back button to try another link.
Cannot find server or DNS Error
Internet Explorer
Please let me know what settings am I supposed to do.
Rgds,
Anupma.Check Your internet Explorer connection settings Internet Option->Connection->LAN settings.
Try playing around with it. We had the same problem in the past.
Greetings
Prashant
P.S- Points welcome -
Web Query -- Page cannot be displayed
Hi,
What parameter controls the time out of a web report.
I have a query which takes around 16 mins to pull up results when I run it thru RSRT and BEx.
When the query is run on the web exactly after 13 mins page cannot be displayed screen comes up..
What parameter controls this time out on the web.
I have kept icm/keep_alive_timout = 3600..I guess its some other parameter..
Thanks in advanceHi,
Another setting for HTTP connections is: icm/conn_timeout (value is in milliseconds).
Some SAP Notes you can refer to on this issue are:
622130
192658
Cheers,
Rusty -
Not able to browse to the CRS Administration URL and "Page Cannot be Displayed error appears"
I have installed IPCCX 7.0 in VMware
I have finished the installation without any error.But after installation when I tried to open the Admin page from
Start > Programs > Cisco Unified CCX Administrator > Application Administration
Getting error message "Page Cannot be displayed".
From troubleShooting Guide found that these services should be running
Check that the CRSJavaAdmin.exe is running (in Windows Task Manager).
World Wide Web Publishing service.IIS Admin service
Can anyone tell me How to run CRSJavaAdmin.exe ??
Thanks in advance.
ReenaHi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj -
Web Dispatcher - Page Cannot Be Displayed
We have a Web Dispatcher in a DMZ (DMZ2) that is used for external (Internet) access to our E-Sourcing application. The E-Sourcing application is in another DMZ (DMZ1).
When external (sell-side) users enter the url in their browser to connect through the Web Dispatcher over the Internet, the initial E-Sourcing screen is displayed very briefly in the browser and then the message 'Page cannot be displayed' comes up on the screen. If the browser screen is refreshed, the login screen is then displayed and the user is able to log in with no issues.
This occurs only when trying to access the E-Sourcing application through the Web Dispatcher. It does not make any difference if the Web Dispatcher hostname is used in the url (internal access through Web Dispatcher) or if the url created specifically for the Web Dispatcher is used (external (Internet) access through the Web Dispatcher). The result is the same.
If either http://WebDisp_Hostname (internal) or http://www.myESOapp.here.com (external Internet) is entered in the browser, both display the front-end ESO screen briefly and then display the 'Page cannot be displayed' message. Refreshing the browser screen then displays the login screen and users can log in OK.
Can anyone point me in the right direction to solve this? I have reviewed the Web Dispatcher trace file and the E-Sourcing log file and can find no errors or anything that would indicate what might be going on. It appears to be a Web Dispatcher issue. Any help would be appreciated.
WLHi Wayne,
When external (sell-side) users enter the url in their browser to connect through the Web Dispatcher over the Internet, the initial E-Sourcing screen is displayed very briefly in the browser and then the message 'Page cannot be displayed' comes up on the screen. If the browser screen is refreshed, the login screen is then displayed and the user is able to log in with no issues.
When first time you call URL , do you the page of Esourcing or you directly get the error page.
It better , install HTTP watch software on you dekstop and then activate the HTTP watch and start browsing the page and generate the problem which you are facing .
Once it is done share the result of HTTP Watch in the forum , depend upon that we can come to some solution.
Thanks
Anil -
Hi All,
We have a page with a subtablayout region with 3 subtabs in that.
It is working in some instances and in one instance we are getting Page cannot be displayed error when one tab is clicked.
Can any one give some light on this?
Thanks
Soujanya.Hi ,
It is custom page.
Soujanya. -
Web Dynpro Layout cannot be displayed
Hi Guys,
I am a beginner using Web Dynpro technic and I would like to know if there is a configuration need to be made to Internet Explorer or in SE80 to display the layout correctly?
For example, I created a text element in a view and in the Layout Tab the Web Browser always tells me that "This program cannot display the webpage"
Is there a special parameter to set up to enable Internet Explorer to display the Web Dynpro Layout? I cannot really find documentation on the subject actually.
Thank you in advance for your answers.
SylvainI post this every once in a while, but everyone should be aware that having to make an entry in your hosts file is NOT normal. I know a lot of people post that as solution, but if you are having to make an entry in hosts file to resolve the URL of your ABAP AS then something is wrong with your network configuration. Your basis administrators should work with your network administrators to get a proper DNS entry setup for your ABAP system. Surely you don't expect that all end users accessing you WDA applications will have manual entries in their hosts file.
-
XML Page cannot be displayed -- whitespace is not allowed at this location
To create an online training program I am using Captivate 3
to create the videos then move the published flash file into
Contribute 3 to create the XML and HTM files. Using the same
publishing steps most videos play; however, some videos do not. I
noticed in the FTP that videos which work will display text when I
open the XML file and those that do not I receive the error message
below:
"XML page cannot be displayed"
"Cannot view XML imput using XSL style sheet."
"Whitespace is not allowed at this location. Error processing
resource"
When I click on the flash files in the FTP the videos that
play and ones that do not play both will allow me to play the
video. I need for HealthStream (the web site my videos are stored)
to connect to the FTP but receive the message "error parsing the
XML document and content cannot be launched" due to the error
reading the XML document (located above).
Please help resolve the XML issue.Downloaded Captivate 3 demo to check it out. Nice program,
bit expensive though...
From what I saw so far the xml-export and inport feature is
used to create swf-files in different languages. Correct?
I don't see Contribute creating any xml or html when
importing the swf created by Captivate, so what do you mean exactly
by that?
Is it a feature (that I don't know yet) that you can load xml
files dynamically into the swf's for different languages? From the
help in Captivate I understand that you open your project, then
import the translated xml, publish and then you have a translated
swf. So I don't see why there is xml on your server. I only see the
swf's that function like they should. Inlighten me please and we
will search for more answers... -
Hi,
Db 10.2.0.4
There are retek environment.From application user are trying to create allocation after some time the error is coming that “page cannot be display”. The same process some time run smoothly but sometime occur “page cannot be display”.Kindly suggest.
Thanks
Edited by: user13382934 on Aug 17, 2010 3:18 AMHi,
What i sent you before that was the output of tkrpof because of big file i sent some of the lines.Find below some of the execution plan of tkprof output if you need all kindly send me personal ID i will send you.
Rows Execution Plan
0 SELECT STATEMENT MODE: CHOOSE
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'USER$'
(CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_USER1' (INDEX
(UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF 'TS$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_TS#' (INDEX
(CLUSTER))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF 'TS$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_TS#' (INDEX
(CLUSTER))
SELECT /*+ ALL_ROWS */ COUNT(*)
FROM
ALL_POLICIES V WHERE V.OBJECT_OWNER = :B3 AND V.OBJECT_NAME = :B2 AND
(POLICY_NAME LIKE '%xdbrls%' OR POLICY_NAME LIKE '%$xd_%') AND V.FUNCTION =
:B1
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 270 0.00 0.02 0 0 0 0
Fetch 270 0.00 0.86 0 14850 0 270
total 540 0.00 0.89 0 14850 0 270
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 37 (XDB) (recursive depth: 2)
Rows Execution Plan
0 SELECT STATEMENT MODE: HINT: ALL_ROWS
0 SORT (AGGREGATE)
0 VIEW OF 'ALL_POLICIES' (VIEW)
0 UNION-ALL
0 FILTER
0 HASH JOIN
0 FIXED TABLE (FULL) OF 'X$KSPPI' (TABLE (FIXED))
0 MERGE JOIN (CARTESIAN)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'RLS$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN)
OF 'I_OBJ2' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER)
OF 'TAB$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN)
OF 'I_OBJ#' (INDEX (CLUSTER))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF
'TS$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_TS#' (INDEX (CLUSTER))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF
'SEG$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_FILE#_BLOCK#' (INDEX (CLUSTER))
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF 'USER$'
(CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER#' (INDEX (CLUSTER))
0 BUFFER (SORT)
0 FIXED TABLE (FULL) OF 'X$KSPPCV' (TABLE (FIXED))
0 NESTED LOOPS
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'I_OBJAUTH1'
(INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE (FIXED))
0 FIXED TABLE (FULL) OF 'X$KZSPR' (TABLE (FIXED))
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (FULL) OF 'RLS$'
(TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'I_OBJ2'
(INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_TYPED_VIEW1' (INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_VIEW1'
(INDEX (UNIQUE))
0 NESTED LOOPS
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'I_OBJAUTH1'
(INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE (FIXED))
0 FIXED TABLE (FULL) OF 'X$KZSPR' (TABLE (FIXED))
0 HASH JOIN
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_USER1'
(INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (FULL) OF 'RLS$'
(TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_OBJ1'
(INDEX (UNIQUE))
0 VIEW OF 'ALL_SYNONYMS' (VIEW)
0 SORT (UNIQUE)
0 UNION-ALL
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJ2' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'SYN$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_SYN1' (INDEX (UNIQUE))
0 FILTER
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN)
OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJ2' (INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJAUTH1' (INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE (FIXED))
0 FIXED TABLE (FULL) OF 'X$KZSPR' (TABLE (FIXED))
0 NESTED LOOPS
0 HASH JOIN
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJ2' (INDEX (UNIQUE))
0 VIEW OF '_ALL_SYNONYMS_TREE' (VIEW)
0 CONNECT BY (WITH FILTERING)
0 FILTER
0 COUNT
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED (FULL)
OF 'USER$' (CLUSTER)
0 NESTED LOOPS
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'SYN$' (TABLE)
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'USER$' (CLUSTER)
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'OBJ$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'SYN$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_SYN1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE
SCAN) OF 'I_OBJ2' (INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (RANGE SCAN)
OF 'I_OBJAUTH1' (INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE
(FIXED))
0 HASH JOIN
0 CONNECT BY PUMP
0 COUNT
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED (FULL)
OF 'USER$' (CLUSTER)
0 NESTED LOOPS
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'SYN$' (TABLE)
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'USER$' (CLUSTER)
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'OBJ$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 COUNT
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED (FULL)
OF 'USER$' (CLUSTER)
0 NESTED LOOPS
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'SYN$' (TABLE)
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'USER$' (CLUSTER)
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'OBJ$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'SYN$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_SYN1' (INDEX (UNIQUE))
SELECT COUNT(*)
FROM
ALL_USERS WHERE USER_ID = :B1
Thanks, -
Page cannot be displayed in PI end to end monitoring
In our production environment we get the 'page cannot be displayed' screen after from end to end monitoring clicking on display.
We did turn on the monitoring via RWB in 'configuration' on level high for the XIIntergrationServer and XIAdapterFramework and than saved the configuration.
Our other PI servers work fine.
Any ideas?
Already checked not 885405 and 923666Hi,
Please refer http://help.sap.com/saphelp_nwpi71/helpdata/en/98/1ccbed8a233e4ca57d2b938e67c188/frameset.htm
for the help on configuration of end to end monitoring in RWB. Please note that you have started HTTP services for PMI in SICF or RSXMB_ACTIVATE_ICF_SERVICES.
As its production system, you can contact your basis team and get check if any system/service user is locked.
Alternatively , instead of using E2E monitoring we can get most of the PI related information using Message monitoring itsef, i dont use end to end monitoring so often as most info i get from moni trace or message monitoring,component monitoring RWB.
Best Regards,
Srinivas -
Web Dynpro Layout - Shows The page cannot be displayed
Hi
I am getting "The page cannot be displayed" in the Layout Tab of Web Dynpro - View Component.
Can someone help me to fix this issue.
Regards
VenkatHi,
Check the SAP notes 1009930 and 1008689. Also ensure that you have activated /default_host/sap/public/bc/webdynpro/viewdesigner & /sap/bc/wdvd/ nodes in SICF.
Check out the [SAP Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/content.htm] for more details. -
'The page cannot be displayed' when I use IE to open Web Dynpro demo
In the package 'SWDP_DEMO_TUTORIALS' .
Folder Web Dynpro Applicat. -> WDT_ALV ==> URL = 'http://abcdev.:8000/sap/bc/webdynpro/sap/wdt_alv'
then Right click and choose Test.
IE is open but 'The page cannot be displayed'. (http://abcdev.:8000/sap/bc/webdynpro/sap/wdt_alv?sap-client=210&sap-language=EN)
1. I actived neccessary service in SICF already. (http://forum.consolut.net/viewtopic.php?f=8&t=1313)
2. C:\WINDOWS\system32\drivers\etc -> hosts file has 2 record.
127.0.0.1 localhost
HP002264446493 HP002264446493
I think I have to add the SAP server IP
So I click at menu bar -> System -> Status and press Other Kernel info. (Green)
==>> I get Host = abcdev and IP address = 10.74.XX.YY
After that, I add the 10.74.XX.YY abcdev to be the last line.
Is it correct?
3. No data in table HTTPURLLOC.
4. ECC 6 and I never installed Netweaver.
PS. I create my own web dynpro but the layout is not working 'The page cannot be displayed' .
Thank you very much.I change host file to 'abcdev.' but it does not work.
If I use command 'ping -t 10.74.XX.YY' , it's ok.
If I use ping -t abcdev.:8000, it's not working.
PS. IE version 6 and Connection -> Lan settings ==> Not set anything.
Help me please!!!
Edited by: marshi on Feb 8, 2011 2:34 PM -
View layout is not displaying, ( The page cannot be displayed)
Hi guys,
we have recently installed the ECC6. In webdynpro component, the view layout is not displaying, instead it showing the error message like " the page cannot be displayed".
I came to know that, in order to display the view layout we need to activate some services .
Please let me know what are the services should activate in order to display the layout.
Regards
SrinivasHi Sana,
this is very absic problem in webdynpro, lots of threades are there do search..
getting error 'Page cannot be displayed' in view layout
ABAP Web Dynpro : view designer layout error !
Layout Tab Preview: This program cannot display the webpage
Cheers,
Kris. -
Web dynpro abap cannot display web page
Hello
when running Test in se80 on my web dynpro application the browser says it cannot display the web page.
1. the url of the wd application is http://<hostname>.domain.ext:8000/sap/bc/webdynpro/sap/<component name>
2. rz10 says that profile NSP_DVEBMGS00_<hostname> has icm/host_name_full = <hostname>.domain.ext
3. rz11 says that icm/host_name_full = <hostname>.domain.ext
4. smicm says that icm/host_name_full = <hostname>.domain.ext
5. in etc/hosts on vista 32bit version 6002 I have put:
127.0.0.1 localhost
127.0.0.1 <hostname>.domain.ext
10.10.0.10 <hostname>.domain.ext
<empty line>
I also have
SAPGLOBALHOST <hostname>
rdisp/mshost <hostname>
and no values at all for
SAPLOCALHOST
SAPLOCALHOSTFULL
in the profiles.
The following works:
http://localhost:50013/sapmc/sapmc.html?SID=NSP&NR=00&HOST=<hostname>.
Can anyone help me? I read that many of you have solved this but, you see, I do not understand what you have done.Setting icm/host_name_full to <hostname>.domain.ext in rz10 in profile NSP_DVEBMGS00_<hostname> means:
1) I can no longer see my web dynpro view layout in se80 - instead of the view layout I get a browser screen that says the page cannot be displayed;
2) I get the same browser screen saying the page cannot be displayed when running the wd application test.
If I remove that parameter in rz10 then:
3) I can see and work with my view layouts in se80;
4) I get a 500 rabax state error when I do the wd application test;
5) I can do a successful wd application test by changing the url manually in the browser from <hostname>:8000 to localhost:8000 ... as in
http://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName(FQDN). -
XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh
Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck?
Maybe you are looking for
-
The lasso tools worked great before i upgraded to Yosemite.. Some one please help.
-
AppleWorks for the modern day, a migration tip
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as
-
Slow start (white frame) when hardware acceleration is on
When I launch FF4, I see a white windows frame for 2-4 sec before it actually show the interface inside the frame. This is not happening if I uncheck the "Use hardware acceleration" checkbox. However, I would like to use it... My System is a new Dell
-
Hi, I work with TestStand 2012 in my actual project to test a device (design test). If I call a sequence about "sequence call" (Adpater: Sequence, Type: SequenceCall) I receive always a passed result. "ignore runtime errors" is set in this testsystem
-
Active X control with Reader 9.4
Hi, I would like to show up pdf file in my application I found my adobe reader Id at registy - it is String progID = "AcroPDF.FDF.1"; But when I executing OleControlSite site = new OleControlSite(frame, SWT.NONE, progID); thow exception org.eclipse.s