In XML field is missed

Hi All,
I have query related field mapping. My field mapping is working in Development server but same mapping is not working in QA. In QA i can see all mapping. During IDOC generation in one field record is coming, but in XML particular field is not showing. Plesae suggest me. What is the problrm behind this issue?
Thanks
Amit

Amit,
try to trace the error:
1) go to xml monitor and save the input (inbound message) as a xml file.
2) go to Design and goto Tab Test.
3) open your xml file and process your test.
I think this is a good way to trace the issue.
I think you have an empty value (maybe if without else) in your target field, and empty fileds are not shown in the xml output.
Or try to check your xml structure in the target system. Maybe this one is different to your DEV structure.
Good luck!,
Gordon

Similar Messages

MissingFieldException[ The following required field is missing from the lau

Hi, I'm new to this forum so please put this thread in the right place if I have made a mistake.
But here's my problem:
I'm using jre 7 with the latest version.
I downloaded and wanted to launch a Java based .jar game, which runs perfectly for the other users but my JRE gives the following error:
Application error - unable to launch the application.
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
     at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main.access$000(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
On the forum where is the game developed i got the following answer:
''+it seems your OS/jre installation tries to start the jar as an applet which fails, because it's a regular application and not an applet. is there any way you can convince your jre to start LS as an application? i would like to give better/more detailed advice, but i'm not running windows, so i can't check for myself/try to work out a step-by-step guide.+ ''
As I have browsed the internet for hours and haven't come up with a solution I'm asking for some help.

That error seems to indicate that the JNLP file is broken because it is missing the starting starting <jnlp> XML tag; I'll take a guess and just say that it is completely empty. Since it works for other users, apparently somehow when you download it on your computer you end up with a broken file. No idea why, no way for me to know why either. I don't have access to your computer. All I can say is: try in another browser and if that doesn't work, try on another computer. If it works there, well then you may have to face the fact that your computer might need a clean install.
And PS: this is a Java programming forum, not technical support for whatever game you want to play that just happens to use Java.

Error: The following required field is missing from the launch file: jnlp

PLEASE help me.
I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I try to access www.bayphoto.com to download my application it says: (see below) (which I think is strange because it's all about Starbuck's and it should be my java code- I think...). Like I said - I have no idea what's going on or how to fix this. Please help me or at least tell me whom to call- I feel so stupid- I just need help- ATT? Starbuck's? Sun?
Error: The following required field is missing from the launch file: <jnlp>
Under the "exceptions" tab it says:
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
     at com.sun.javaws.jnl.XMLFormat.parse(XMLFormat.java:88)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:52)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:64)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:72)
     at com.sun.javaws.Launcher.updateFinalLaunchDesc(Launcher.java:214)
     at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:127)
     at com.sun.javaws.Launcher.launch(Launcher.java:95)
     at com.sun.javaws.Main.launchApp(Main.java:305)
     at com.sun.javaws.Main.continueInSecureThread(Main.java:213)
     at com.sun.javaws.Main$1.run(Main.java:108)
     at java.lang.Thread.run(Thread.java:613)
Under the "launch file tab" it says:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>AT&T Wi-Fi Service @ Starbucks</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="Starbucks Entertainment presented by AT&T Hotspot" />
<meta name="keywords" content="AT&T, Starbucks, Wi-fi, Wifi, Hotspot, coffee, music, books, games, fresh sheet, third place, online" />
<meta name="author" content="Starbucks Entertainment" />
<link rel="shortcut icon" type="image/ico" href="/favicon.ico" />
<script type="text/javascript" language="javascript" src="/dhtml/master.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_core.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_event.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_xhr.js"></script>
<script type="text/javascript" src="/dhtml/att/dhtml.js"></script>
<style type="text/css">
copied from starbucks master.css
body {
     background:#200D06 url("/graphics/att/themes/sbux/hotspot_bkgd.jpg") repeat-x scroll;
     color:#555555;
     font-family:Arial,Helvetica,sans-serif;
     font-size:small;
     line-height:1.5em;
     margin:0pt;
     padding:0pt;
     text-align:center;
#wrap {
     font-size:95%;
     margin:0pt auto;
     text-align:left;
     width:980px;
#starbucksframe {
     margin:15px 0pt 0pt;
     padding:0pt;
/*our addendae*/
div#header {
     height:95px;
     width:980px;
     background-image:url("/graphics/att/themes/sbux/header_bg.jpg");
     background-repeat:no-repeat;
     margin:0px;
     background-top:0px;
     background-left:0px;
     background-color:transparent;
div#btn_ctti {
     position:absolute;
     top:10px;
     margin-left:388px;
div#sbux_lfrm {
     display:inline;
     font-size:10px;
     color:#FFFFFF;
     margin-left:245px;
     top:49px;
     position:absolute;
     line-height:10px;
     font-family:verdana,arial,helvetica,sans-serif;
div#sbux_lfrm form {
     margin:0px;
div#sbux_lfrm a, div#sbux_lfrm a:link, div#sbux_lfrm a:hover, div#sbux_lfrm a:active, div#sbux_lfrm a:hover {
     color:#FFFFFF;
div#sbux_lfrm form label {
     display:none;
     visibility:hidden;
div#sbux_lfrm form input, div#sbux_lfrm form select {
     font-family:verdana,arial,helvetica,sans-serif;
     vertical-align:middle;
div#sbux_lfrm input.example {
     color:#656565;
#sbux_lfrm_row1, #sbux_lfrm_row2 {
     margin:0px;
#sbux_lfrm input#username, #sbux_lfrm input#password, #sbux_lfrm input#password_pw {
     width:136px;
     margin-right:6px;
     font-size:10px;
#sbux_lfrm select#roamRealm {
     width:130px;
     font-size:10px;
     color:#656565;
     margin-right:6px;
#sbux_lfrm_row2 {
     position:absolute;
     top:21px;
     left:-4px;
div#aupAgree_row {
     margin-top:4px;
     position:relative;
     left:-4px;
div#aup_box {
     float:left;
     position:relative;
     top:-3px;
div#aup_text {
     float:left;
     line-height:10px;
div#tm_badge {
     width:115px;
     height:94px;
     float:right;
     margin-right:0px;
     margin-top:0px;
div#password_value {
     display:inline;
div#hidden_pw_field {
     display:none;
     visibility:hidden;
div#sbux_lfrm.css_form {
     margin-top:0px;
</style>
<style>
/* IE specs */
body {
     font-size: x-small; /* IE5 Win */
     voice-family: "\"}\"";
     voice-family: inherit;
     font-size: small;
html>body { /* be nice to Opera */
     font-size: small;
/* self-clearing floats
/* trigger hasLayout and target ie5+6/win only */
*:first-child+html #header,
*:first-child+html #login_wrapper {
     height:95px;
#ny_legal {
     color:#CAC3BF;
     font-size:11px;
     font-weight:bold;
     padding:0;
#ny_legal a:link {
     color:#CAC3BF;
     font-size:11px;
     font-weight:bold;
     padding:0;
</style>
</html>
TOO LONG TO INCLUDE ALL CODE

<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="file:///C:\eclipse\workspace\studentconverter\webroot" href="studentconverter.jar" >two things wrong here -
first codebase is not legal URL, File.separator (backslash on windows) needs to be converted to forward slash in URL's.
second, the href is not to the jnlp file, it is to the jar !
href="studentconverter.jar" - should this be href="studentconverter.jnlp" ?
/Dietz

File Content Conversion some fields are missing

Hello Friends,
I am trying to convert a fixed length flat file to XML.
Here are my parameters
CompanyCodeRecord.fieldNames = field1,field2,....field50
CompanyCodeRecord.fieldFixedLengths = 1,4,15,20...,50 (for all 50 fields)
CompanyCodeRecord.processFieldNames = fromConfiguration
CompanyCodeRecord.lastFieldsOptional = YES
CompanyCodeRecord.endSeparator = nl
If I do not use lastFieldsOptional=YES then the adapter is throwing an exception Error: <b>Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 1 according to structure 'CompanyCodeRecord':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
last retry interval started 19:31:08 2005-07-11</b>
If I use lastFieldsOptional=YES then the message does not contain last 8 columns (That means each record is containing only 42 columns).
Please help.
Thanks
SKM

Hi SKM
Go through this blog on sending fixed length flat file
<b>/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
and
>><i>lastFieldsOptional=YES then the message does not contain last 8 columns</i>
<b>lastFieldOptioanl parameter specifies whether the last fields can be omitted (YES) or not (NO) in a CSV structure. If you do not make a specification, the default value is NO</b>.
So i think u should use <b>NO</b> in this parameter.
Hope it helps.
Regards
Arpit Seth

** Inbound IDoc - One field is missing but it is displayed in SXI_MONITOR

Hi Friends,
We have developed IDoc to IDoc scenario. Source IDoc is sent from 3rd party system. Target is an Z IDoc (Replica of VEHCLE01 IDoc).
When we test the source IDoc XML from RWB, the message processed successfully in SXI_MONITOR and target IDoc is also created in backend SAP system. But, the problem is that, in target payload there are 5 fields. But, in the physical idoc created in SAP system has only 4 fields. The last field is missing.
Since it is inbound IDoc, I deleted the IDoc meta data in IDX2 txn, and reimported again the Z IDoc. But, again the same problem is coming. i.e one field is missing in inbound IDoc. But, in the receiver payload, that field is there with value.
Kindly clarify, friends.
Kind Regards,
Jegathees P.

HI,
If that field is missing for first time in R3 means(ie Receiver system, Idoc posting in we02) , then
XI side:
1. u have check whether that field is existing in Target Interface,Target Message in Interface Mapping
2. Make sure that u have mapped that field in Message Mapping.
R3 (receiver side)
1. Plz check we30 , whether that field is there for that ZIdoc structure
2. Take the same Idoc which got posted , test in we19 whether that Idoc getting posted with that field or not?
check whether ur Idoc structure is activated in XI
Thanks
Praba

XSQL not delivering XML fields

[Win AS2003/Oracle 10.1/OC4J Standalone 9.0.4/XDK 10.1.0.2]
I am trying to do a query in XSQL that includes one field of XML. However, the XML field always yields the error:
oracle.xml.sql.OracleXMLSQLException: Conversion to String failed
This happens with a native XMLTYPE field, or if I use the XMLTYPE() function on a varchar field. The same XSQL files worked just fine under Oracle 9.2, so I'm wondering if my (cumbersome) installation of the XSQL servlet under OC4J is missing a jar somewhere--I followed the directions, but you never know...
P.S.: Why did Oracle make XSQL so much more difficult to implement in 10g than in 9i? I had to install the Oracle HTTP server separately, which didn't include any java servlet engine, so I had to install OC4J manually (A real pain), then the XDK manually. It all just installed automatically in 9i.

[been avoiding this issue, but now coming back to it]
Felipe,
The anchor in your URL didn't work, but I guess you're pointing to the following quote:
==============================================
Oracle9i introduced the XMLType for use with storing and querying XML-based database content. You can exploit database XML features to produce XML for inclusion in your XSQL pages using one of two techniques:
* <xsql:query> handles any query including columns of type XMLType, however it handles XML markup in CLOB/VARCHAR2 columns as literal text.
==============================================
Which is a nice thing to say, except that I get the results described above, not what the documentation says I should get.
Perhaps it is the servlet engine I am using (OC4J), but since it is an oracle engine, it ought to work.
Brandon

Fields are missing in Purchasing View

Dear Experts,
We have developed Work flow to create material.The work flow cycle follows like this
<b>User1-Basic Data1&2,User2-Sales Views,User 3-Purchasing View,User4-MRP Views and User5- Finance and Accounting Views...</b>
For this we made an option in Basic Data1 view.There is a field called <b>Lab/Office</b>,we customized this field for our purpose.
1.If we give value as 1, system will trigger user to create a material through work flow.
2.If we give value as 2,system will come out of work flow,and user can create a material as normal.
Now we got an issue like this...when user has created a material through work flow,in Purchasing View some fields are missing...<b>Purchasing Group,Plant-sp.matl status,Tax ind. f. material,Qual.f.FreeGoodsDis,Autom.PO</b>....
While creation of material this Purchasing Group field is appearing at the time of MRP1 and after creation of material,when we go for display material it is showing <b>Purchasing Group,Plant-sp.matl status,Tax ind. f. material,Qual.f.FreeGoodsDis</b> fields.....
Why it is happening like this???Does this Lab/Office Field has got any affect on work flow???
Please reply me...
Regards
MK

Dear Ashish,
We had given authorization to user.
I would like to ask one more thing,with this particular user we tried to create a material through normal procedure with MM01.Then also in Purchasing View Screen,some fields are missing.
<b>Purchasing Group,Plant-sp.matl status,Tax ind. f. material,Qual.f.FreeGoodsDis,Autom.PO....</b>...
We tried to create with other user,then we can see all field Purchasing View....
So is there any settings on user specific for these fields???
Please Do Reply me....
Regards
MK

I saved docs from a iMac to a flashdrive but when I plug the flashdrive into an iBookG4 and try to open the docs on the flashdrive, I get this message: Doc 2 cannot be opened. The required index.xml file is missing.

I saved docs from a iMac to a flashdrive but when I plug the flashdrive into an iBookG4 and try to open the docs on the flashdrive, I get this message: Doc 2 cannot be opened. The required index.xml file is missing. Does this mean that I can't use the info on the flashdrive with the iBookG4 or can I do something to get the required index.xml file?
Thanks
jt

It appears if you write the document with newer version Pages and try to open it older version Pages.

I can't open a file on Pages'09 4.1 I get window that says "The required index.xml file is missing." How do I get this file open?

I have a file that I havel been adding to for years. I opened it a week ago but today I tried and I got the window message
"the required index.xml file is missing" How do I get this to open?
I have Pages '09 4.1 Not sure when that was put on or updated.
Thanks for any help you can give
Teacher72

http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308&mforum=iworktips ntrick
Are you sure you haven't upgraded Pages on your Mac to Pages 5?
Check your Applications folder and the Applications/iWork folder. You may have 2 versions on your Mac.
Peter

Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMare

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

SLED field is missing in ECC 6.0

Hello!!!
we're upgrading from 4.6C to ECC 6.0.
I have a problem with SLED field in MIGO transaction in ECC 6.0
For not batch-managed materials, the SLED check is activated.
1)In Custimizing, the plant and movement type are actived.
2) remining self life in Material master plant stock view -> 0 Days
3)The PO -> 0 Days
4) Info record -> 0 Days
WHen we enter the MIGO transaction, in Material tab, the SLED field is missing, so we can't enter de SLED. If I maintain in PO or material, more than 0 Days, the field is open, but It doesn't work with 0 Days...
In 4.6C version, the SLED filed is open, and It's OK.
I don't find the solution...any idea???
Thanks ins advance.
Best regards
María.

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

How do I Load a clob from an XML field in an XMLTYPE using XMLTABLE ?

I am trying to load data into a CLOB from a XML field using XMLTABLE.
I have a SUMMARY xml field with over 100 K of data (potentialy)
and I can load all the other datatype fields to columns but can not load the xml fields over 4000 characters.
example
First I create a table of XMLTYPE. I need to sqlload new files in at regular intervals.
Create table WEB_XML of XMLTYPE;
Then I create my relational table....
create table WEB_WORKING
request_id varchar(10),
ref_number varchar(20),
summary clob
The I use the .ctl file to sqlload the xml data in
LOAD DATA
INFILE *
INTO TABLE WEB_XML
append
xmltype(XMLDATA)
ext_fname filler char(90),
XMLDATA LOBFILE(ext_fname) TERMINATED BY EOF
BEGINDATA
XMLFILE1.xml
After loading the WEB_XML table using sqlldr, I try to load my relational table using XMLTable
INSERT into WEBBAR_WORKING
request_id ,
ref_number ,
summary
SELECT X.* FROM WEB_XML P2,
XMLTable ( '//Request//REQUESTVIEW'
PASSING P2.object_value
COLUMNS
"request_id" VARCHAR(10) PATH 'REQUEST_ID',
"ref_number" VARchar(20) PATH 'REF_NUMBER',
"SUMMARY" clob PATH 'SUMMARY'
) AS X;
This gives an error saying its not expecting clob
My XML looks somthing like
-<Request>
-<REQUESTVIEW>
<REQUEST_ID>3140</REQUEST_ID>
<ref_number>2003-04-02</RECEIVED_DATE>
<SUMMARY>
OVER 100 K of data
</SUMMARY>
</REQUESTVIEW>
</Request>

ok
that helped lot, im getting there however some more help please
This SQL
SELECT request_id, recieved_by, X.SUMMARY.getClobVal()
FROM WEB_XML P2,
XMLTable
'//Request//REQUESTVIEW'
PASSING P2.object_value
COLUMNS
"request_id" VARCHAR(10) PATH 'REQUEST_ID',
"received_by" VARCHAR(10) PATH 'RECEIVED_BY',
"SUMMARY" xmltype PATH 'SUMMARY'
) AS X;
SELECT request_id, recieved_by, X.SUMMARY.getClobVal()
ERROR at line 1:
ORA-00904: "RECIEVED_BY": invalid identifier
If I use the X.request_id, X.received_by ......
i get the error message
Package or function is in aan invalid state.
But this SQL was successful in getting the clob by itself but with the XML tgs around it still, how do I strip the XML tags from around this result ?
SELECT X.SUMMARY.getClobVal()
FROM WEBBAR_XML P2,
XMLTable
'//Request//REQUESTVIEW'
PASSING P2.object_value
COLUMNS
"SUMMARY" XMLTYPE PATH 'SUMMARY'
) AS X;
----------------------------------------------------------

Unable to modify a XML node which is a SimpleType using a Typed XML field.

Hello,
I have an XSD schema that uses SimpleTypes. When I attempt to modify a node in an Schema typed XML field, which has a schema using simpletypes, I receive the error: XQuery [modify()]: The value is of type "xs:string", which is not a
subtype of the expected type "<anonymous>"
To reproduce the problem use the following information:
SCHEMA:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:ns1="http://testschema" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:vc="http://www.w3.org/2007/XMLSchema-versioning" targetNamespace="http://testschema" elementFormDefault="qualified" attributeFormDefault="unqualified" vc:minVersion="1.1">
<xs:element name="Test">
<xs:annotation>
<xs:documentation>Comment describing your root element</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="SAPCode">
<xs:annotation>
<xs:documentation>Customer Number for Delivery Organization</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:length value="10"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="OrganizationName">
<xs:annotation>
<xs:documentation>Name of Organization</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="AttentionTo" minOccurs="0">
<xs:annotation>
<xs:documentation>Attention to Recepient for the delivery</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150" fixed="false"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Address1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Address2" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Address3" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="City">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="StateProvince">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PostalCode">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="20"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Country">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:length value="2"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Phone" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="EmailAddress" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="200"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
The T-SQL That produces the error:
DECLARE
@vx_Test xml (CONTENT [dbo].[Test]),
@vs_ShipToAttentionTo NVARCHAR(50)
SET
@vx_Test = N'<ns0:Test xmlns:ns0="http://testschema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ns0:SAPCode>1234567890</ns0:SAPCode>
<ns0:OrganizationName>Test Org</ns0:OrganizationName>
<ns0:AttentionTo>Test Person</ns0:AttentionTo>
<ns0:Address1>123 Main Street</ns0:Address1>
<ns0:City>Test City</ns0:City>
<ns0:StateProvince>IL</ns0:StateProvince>
<ns0:PostalCode>12345</ns0:PostalCode>
<ns0:Country>US</ns0:Country>
</ns0:Test>'
SET
@vs_ShipToAttentionTo = 'New Attention To'
SET @vx_Test.modify('declare namespace ns0="http://testschema";
replace value of (/ns0:Test[1]/ns0:AttentionTo) with sql:variable("@vs_ShipToAttentionTo")');
-- This would be how I would reference it if I was modifiying the XML in a typed XML column in a table.
WITH XMLNAMESPACES('http://testschema' AS ns0)
UPDATE TestItems
SET TestXML.modify('replace value of (/ns0:Test[1]/ns0:AttentionTo) with sql:variable("@vs_ShipToAttentionTo")')
SELECT @vx_Test
How can I make this work. In this example I am using a typed XML variable, but I really want to do this in a table update.
Thanks,
Kent

Try the change below. What I did was to create a named simple type for the AttentionTo node. Here is my understanding (based on this working). Because you have a simpleType the node cannot accept just any string, it has to be a string of
the type in the simpleType. That simpleType has no name (thus anonymous).
What I did was to create a named simpleType and used that simpleType as the type for the AttentionTo element. Then in my XQuery, I cast the value to the name of that type (AttentionToType in my example).
CREATE xml schema collection Test as '<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:ns1="http://testschema" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:vc="http://www.w3.org/2007/XMLSchema-versioning" targetNamespace="http://testschema" elementFormDefault="qualified" attributeFormDefault="unqualified" vc:minVersion="1.1">
<xs:element name="Test">
<xs:annotation>
<xs:documentation>Comment describing your root element</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="SAPCode">
<xs:annotation>
<xs:documentation>Customer Number for Delivery Organization</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:length value="10"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="OrganizationName">
<xs:annotation>
<xs:documentation>Name of Organization</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="AttentionTo" minOccurs="0" type="ns1:AttentionToType">
<xs:annotation>
<xs:documentation>Attention to Recepient for the delivery</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="Address1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Address2" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Address3" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="150"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="City">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="StateProvince">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="100"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PostalCode">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="20"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Country">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:length value="2"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Phone" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="EmailAddress" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="200"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:simpleType name="AttentionToType">
<xs:restriction base="xs:string">
<xs:maxLength value="150" fixed="false"/>
</xs:restriction>
</xs:simpleType>
</xs:schema>';
go
DECLARE
@vx_Test xml (CONTENT dbo.Test),
@vs_ShipToAttentionTo nvarchar(50)
SET
@vx_Test = N'<ns0:Test xmlns:ns0="http://testschema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ns0:SAPCode>1234567890</ns0:SAPCode>
<ns0:OrganizationName>Test Org</ns0:OrganizationName>
<ns0:AttentionTo>Test Person</ns0:AttentionTo>
<ns0:Address1>123 Main Street</ns0:Address1>
<ns0:City>Test City</ns0:City>
<ns0:StateProvince>IL</ns0:StateProvince>
<ns0:PostalCode>12345</ns0:PostalCode>
<ns0:Country>US</ns0:Country>
</ns0:Test>'
SET
@vs_ShipToAttentionTo = 'New Attention To'
SET @vx_Test.modify('declare namespace ns0="http://testschema";
replace value of (/ns0:Test[1]/ns0:AttentionTo) with sql:variable("@vs_ShipToAttentionTo") cast as ns0:AttentionToType?');
-- This would be how I would reference it if I was modifiying the XML in a typed XML column in a table.
WITH XMLNAMESPACES('http://testschema' AS ns0)
UPDATE TestItems
SET TestXML.modify('replace value of (/ns0:Test[1]/ns0:AttentionTo)
with sql:variable("@vs_ShipToAttentionTo")')
SELECT @vx_Test
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

Org.xml.sax.SAXParseException: Missing whitespace before SYSTEM literal URI

Hi
I've written a Java web service using WLW7.0.1. I now want to test it using SOAP
RPC from a Java client. Having written the client, I get a "org.xml.sax.SAXParseException:
Missing whitespace before SYSTEM literal URI" exception when I run it.
Has anyone else come across this exception, or am I missing something glaringly
obvious?!!!
Thanks
Tim

Hi Tim,
Could you post the entire traceback?
Also, you might try the verify utility against the WSDL just as a check:
http://webservice.bea.com/wsdlVerify.zip
You are using clientgen to build the client?
HTHs,
Bruce
Tim Dickson wrote:
>
Hi
I've written a Java web service using WLW7.0.1. I now want to test it using SOAP
RPC from a Java client. Having written the client, I get a "org.xml.sax.SAXParseException:
Missing whitespace before SYSTEM literal URI" exception when I run it.
Has anyone else come across this exception, or am I missing something glaringly
obvious?!!!
Thanks
Tim

HT202879 How do I fix "the required index.xml file is missing?" when opening Pages documents?

I can't open any documents from my son's iPad. Error message: the required index.xml file is missing. How do I fix this error so that I can open his Pages documents? Before I ran the latest update as prompted when I opened Pages, I WAS able to open and view the document.
I did try restoring Pages using my Time Machine, but it still won't open the Pages document.
I have a brand new iMac that I just set up last week.
Son uses iPad at school, so we update when the school asks him to update. Will doublecheck his version of Pages but it should be pretty recent.
In general I don't like using Pages because it lacks a lot of the backwards / forwards compatibilty of Microsoft Word.
However, it is what my son uses with the iPad.
Most of the time I have to export his files as WORD files because we never seem to have compatible versions of Pages between the iPad and the desktop iMacs.
Where can I recommend that Apple improve its compatibility issues with Pages?
This week I am going to receive a new iPad at my school (I am a teacher) but I am 100% certain that it will not be compatible with the older version of Pages on my classroom iMac. I also avoid using Keynote for the same reason. I have 15 year old Power Points that I can still open, but I am hesitant to switch over to Keynote because I want to be able to open my files any time, any where.
Please advise.

Not sure what v5 is. Someone helped me and opened it through Pages 5.2, through the program, rather than the Finder. Thanks for making a suggestion!

In XML field is missed

Similar Messages

Maybe you are looking for