Including a new (z)field in XD01 - SAP 4.6

Hi experts,
I´d like to know how to (if it´s possible) insert a new Z field in the standard transaction XD01 in SAP 4.6 version.
My request is just to modify the KNA1 table by including this new field an also adjust the XD01 screen to show the new field (both, when creating a new client and when displaying clients - XD03).
Regards,
Rafael V. Silva.

You can add customer appends to the table. Most probably you have to check which structure is used on the dynpro. You also need to add the field to the dynpro structure in order to display it.
Here you can find how to create a customer append:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/60/d6ba6fceda11d1953a0000e82de14a/frameset.htm
Regards,
Martin

Similar Messages

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

Add a new field on SRS (SAP Retail Store)

Hi Experts,
We have a requirement to add a new field on the SRS(SAP Retail Store) screen for Purchase Order.
We identified the template - zwspo_entry/90/saplwspo_docdlg_2000.
We included a new field in the Internet Services => ZWSPO_DOCDLG under TOPIC_90.
Now we can see the field on the web output.
However the corresponding input value which is entered by user is not gettting updated in the structure WSPO_HEAD. So we are unable to save the value entered by user in the PO.
The code is as below :-
<tr>
<TD class="formatlabel" width = 200>
       <label for="STG_LOC">`#_2100_sloc`</label>
    </TD>
    <TD nowrap colspan="5">
         <INPUT id="STG_LOC" TYPE="text" name="WSPO_HEAD-STG_LOC" value="`WSPO_HEAD-STG_LOC`" maxlength="4" size="4" >
         `if (WSRS_RETURN-FIELD == "STG_LOC")`
              <img src="`mimeURL(~service="WOSM", ~name="image/arrl.gif", ~language="")`">
          `end`
    </TD>
   </tr>
STG_LOC is a new field which we have appended to WSPO_HEAD.
We have created a enhancement in include LWSPO_BAPIF02 in subroutine BAPI_CRT_POHEADER_MAP_TO where we get the values of WSPO_HEAD. However for STG_LOC its coming blank though we are entering a value on the web.
Any pointers to resolve this would be extremely helpful.
Thanks,
Best regards,
Prashant

Hi:
Check this link
http://erpgenie.com/index.php?option=com_content&task=category&sectionid=6&id=55&Itemid=77
Regards
Roberto

How to include a new field for checking duplicate customer master

Dear All
we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
Procedure:
Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
regards,

Hi
Use the enhancement SAPMF02D to check these values.
Regards
Eduardo

New table / field in SAP MDM not being reflected in SAP EP

Hi,
I have added a lookup- flat table in MDM and added a field corresponding to this table in my main Products table.
I have maintained data in both the main table and the look up table thru Data manager
Problem:
I want to populate this field through the SAP EP. I am using std MDM iView Details template. When I check the drop down to select the table, I see only the ones which had come with the MDM std business content. The added tables/ fields are not visible on the portal to select :(.
Can you help me out Please? Are there some settings that need to be done?
Regards,
Alpana

As a mandatory requirement after completing the deployment process, the Web Application Server should be restarted for the changes made by the deployment to take effect and appear in the Portal.
Have you restarted Web Application Server after deployment?
Also check, User Mapping for the Connected MDM System
Search for the User (Portal User) which needs to be mapped to the appropriate MDM User.
It is quite interesting that you are getting all other tables in std i-view template except newly added.
It could be also because you have already there connection of EP with MDM before that table and new field exists in MDM.
And it is showing same existing table and fields, I mean not reflected now newly added table and field. I would suggest you to create the MDM connection with EP from scratch. Just give MDM System Name and ID, MDM Server, Repository, Language, Creating an Alias for the connected MDM System, User Mapping and connection Test for the Connected MDM System.
May be it result in reflecting newly added Table and field which is not visible in EP as of now. Just give it a try.
Hope it helps...
Thanks and Regards,
Mandeep Saini

Adding new custom fields in SAP transaction - PSOBWORK?

Hi,
System - ECC 6.0
I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
I highly appreciate your help on this.
Thanks.
Rajesh

Hi ,
There are options like screen-exits ,badis
the best option would be to find screen exits for the transaction and you code ur logic in the exit and create the screen with your requirement .

Adding new custom fields in SAP transaction?

Hi,
System - ECC 6.0
I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
I highly appreciate your help on this.
Thanks.
Rajesh

Hi,
Find the link below which has step by step process of adding custom fields:
goto site saptechnical-tutorials-ExitsBADIs-EEWB
Hope this would be helpfull.
Regards,
Sharath

Recording transaction code XD01 with new developed fields

Hello to all
I need to create a new recording of transaction XD01 and I need to add new fields created and developed in our project.
These new fields are in one append structure of table KNA1 and thery are in a new tab of tc xdo1 that is controlled by a Z program, not for SAPMF02D.
Is there anyway these fields can be in the recording of tc xd01?
Thanks in advance.

hi ,
can u tell me how to add new fields in XD01 . step by step plz...
ur rewarded....
thanks in advance
vinoth

Impact of Addition of New Value Fields in the existing Op. Concern-COPA

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1)     The client requires three new value fields to be created. Value fields for :
-     Other Airport Charges - International
-     Cargo Commission Cost
-     Personal Cost (Direct)
2)     What are the Steps involved in creation of new value fields? The steps are :
1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4)     If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6)     What are the different methods of cost and revenue allocations in SAP?
7)     I have checked the status of the value fields across clients, It is as followsu2026
     Value Field     Value Field For     Description     Development      Quality     Production
1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

How to add a new additional field in MIGO

Dear Sir,
As a business requirement , we are required to capture some additional information related to Material packing /sizes at the time of MIGO . This information need to be captured /input at the Item level during the MIGO .
We request sap gurus , to kindly guide as what steps need to be followed for adding a new field and also will it require a Z-table also to save the data pertaining to new added field .
Regards
B Mittal

Hi ,
Create a BADI implementation for MB_MIGO_BADI .
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number as shown below:
gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'
e_cprog = <program name>
e_dynnr = <screen number>.
e_heading = <heading>
Under PAI method declare the field to u2018Xu2019.
e_force_change = 'X'.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item .For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = <NAME>.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.
Thanks,
Shailaja Ainala.

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

Incomplete Control Deliveries add new table-field for Incompleteness Proced

Incompletion Control for Deliveries add a new table-field for Incompleteness Procedure G (Delivery header)
Hello,
I'm trying to add a new field for Incompleteness Procedure G (Delivery header), but when I try to customize the procedure G with new fields, I donu2019t find the field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
Foreign Trade/Customs tables are not included like an option for new entries in the customizing of Incompleteness Procedure G, and Iu2019ve to prevent that users save the outbound delivery without entry a valid value for EIKP-EXPVZ (EIKP-EXPVZ= ModeOfTrnsprt-Border).
Otherwise, when users are creating the SD Invoice there is an error for create the Accounting document because Foreign Trade/Customs information is incomplete.
So Iu2019d like to know If is possible to add a new tables ( and fields) to use in the customizing for Incompleteness Procedure for Outbound Deliveries (procedure G).
Thanks!!
Edited by: Ariana Serrano Aguila on Sep 2, 2010 5:19 PM

Hello,
I'm trying to add a new field for Incompleteness Procedure G (Delivery header)
, but when I try to customize the procedure G with new fields, I donu2019t find the
field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
See as far as the table is concerned, the basic reason why it is not getting populated as SAP stores the possible values at the domain level. So i think the right approach to add the table would be to get access key for the domain and then add the new table name at domain level. Please reach out for help from ABAPer in this matter.
You can also use User exit to met this requirement and the appropriate user exit will be as below:
1.MV50AFZL
2. MV50AFZ1
Regards,
Sarthak

Create a new folder in windows from SAP

Hi,
I can execute progrmas from sapusing the WS_EXECUTE function, but how can I crete a new folder in windows from SAP?.
Thnaks

Hi,
I have a idea about this problem.
Firstly, I made a batch file. The file is a text file, so you can create easily the file from the WS_DOWNLOAD function. The file include a command - md (folder name).
Secondarily, I executed the batch file by the function 'WS_EXECUTE'.
Finally, I deleted the temporary file by the WS_FILE_DELETE function.
It's easy.
If do you need the source, you should send a mail to me.
The source is given you.
Best regards,
Don

New Customer Field in Shopping Cart (SRM) with default value

We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
KR Jaideep,

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Including a new (z)field in XD01 - SAP 4.6

Similar Messages

Maybe you are looking for