Including code in a include statement

How come this piece of code isn't valid? <jsp:include page="<%=request.getContextPath() %>/include/subnav.jsp" /> And what are the alternatives? I want the include path to be generated based on the contextPath variable.

jsp:include works with RequestDispatcher (internally), it doesn't require 'context path'.
solution:
<jsp:include page="/include/subnav.jsp" />

Similar Messages

Skype Number area codes do not include mine?

I need a skype number but area codes do not include mine??? wot do i do?
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

Hi, Grapat, and welcome to the Community,
Unfortunately, Skype Numbers are not available for all exchanges, area codes, or even all states in the USA and all countries. We need to choose a Skype Number based upon what is listed at the time we are searching, or check back regularly to see if a particular exchange has been added to the list.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

If I want to order by dateAdded to I have to include it in the select statement like

If I do this:
<cfquery name="chart" datasource="#datasource#">
select behaviourID,score, dateAdded2 = convert(varchar,
dateAdded , 101)
from staff_charts_data
where userID =
<cfqueryparam value="#arguments.userID#"
cfsqltype="cf_sql_integer"> AND
NOT score = 5
</cfquery>
If I want to order by dateAdded to I have to include it in
the select statement like so:
<cfquery name="chart" datasource="#datasource#">
select behaviourID,score, dateAdded2 = convert(varchar,
dateAdded , 101),dateAdded
from staff_charts_data
where userID =
<cfqueryparam value="#arguments.userID#"
cfsqltype="cf_sql_integer"> AND
NOT score = 5
</cfquery>

you should be able to order by dateAdded without it being in
the select clause. The only time the order by field has to be in
the select clause is when your query has an aggregate and group by
clause, like this:
select field1, field2, max(field3) as youralias
from sometables
where whatever
group by field1, field2
order by ???
You can only order field1, field2, max(field3) or youralias.
You can't order by field4.

Extend ABC Code clasification to include code = "D" MRP1 field - tx MM01

Hi All
I need to extend ABC Code clasification to include code = "D" in MRP1 - ABC Indicator field in TX MM01, can someboby tell me how pls!!
thks in advance

you cannot have a D for this field.
See transaction MC40 which is used to calculate and update this field. There is nothing to add a D in the analysis strategy section. So you would need to re-write this transaction as well if you want a D.
Instead use the CC - Abc indicator field in storage location view. Here you can have a D.

Variable code in ZXRSRU01 Include

Hi,
I created the following code in ZXRSRU01 Include for a custom variable 'YFBV_027':
WHEN 'YFBV_027'.
CASE i_step.
WHEN '2'.
      concatenate sy-datum(6) '01' into datum.
      datum(4) = datum(4) + 1.
      l_s_range-low = datum.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
      CLEAR l_s_range.
endcase.
The question is: Why I cannot introduce <b>l_s_range-opt = 'LT'</b>, but only 'EQ'?
The error message is:
00010004    AError for variable in customer enhancement YFBV_027
Thanks for your help.

Hi Claudia,
Is your variable single entry?

How to Debug code written in Include RMCSUZ10?

In our Sales extractor 2LIS_11_VAITM we need to get information from custom Partner Functions whichwere added by the R/3 team.
To do this we have used the SAP provided include:RMCSUZ10
I have changed the Structure: MCPARTNER to include new fields PKUYZ, PKUYX, PNA1YZ.
The Code in the include is as follows:
WHEN 'YZ' .
    MOVE UPE_VBPA-ADRNR TO UPE_PARTNER-PKUYZ.
    MOVE UPE_VBPA-NAME1 TO UPE_PARTNER-PNA1YZ.
    WHEN 'YX' .
    MOVE UPE_VBPA-ADRNR TO UPE_PARTNER-PKUYX.
    MOVE UPE_VBPA-NAME1 TO UPE_PARTNER-PNA1YZ.
These additional fields are available in the LO Pool now and I have pulled them into the extractor.
Strangely though, this code only works in the Delta extraction mode. If we do a setup in R3 and pull the data, the fields remain blank. Does anyone have a similar experience with using this exit?
Also I am able to debug this code only while doing setup in R3.
Is there any other way to debug this code and how can we make it work in Full mode too?
Thanks in advance.
AG

Hi AG.
Regarding the debugging, you could do it the hard and dirty way and write an endless loop at the beginning of your logic and then enter debug mode from the process monitor (in development only of course and remember to delete it again!).
Regards
Jacob
Edited by: Jacob Jansen on Dec 29, 2011 10:26 PM

Program to download the code(Including code in INCLUDES) into PC file

hi Experts,
Is there any SAP program which downloads the code including Code in INCLUDES and text elements associated with that program???
Thanks & Regards.,
Chandra

Hello,
See this: [SAPLink|https://wiki.sdn.sap.com/wiki/x/sgc].
With SAPLink you can download the following type of objects.
ABAP Web Dynpro (requires SAPlink >= 0.1.3)
BI Infocube
BI ODS
BSP
BSP Extensions
DDic - Data dictionary objects
Documentation - SE61
Interfaces
Function Groups
Message Class
PDF Forms
Report Variants
Smartforms
Transactions
XSLT
Regards.

Examples of code ritten in includes in user exits

Can anyone send some examples on code written in includes of user exits.
                                   Thanks in advance

               U S E R   E X I T   F O R   P A 0 0 0 8               *
IF innnn-infty = '0008' AND
( ipsyst-ioper = 'INS' OR
   ipsyst-ioper = 'COP' ).
             G L O B A L   D E C L A R A T I O N S                   *
DATA:
      g_lga         TYPE lgart,      " Wagetype
      g_count(2)    TYPE n,
      g_cnt_blank(2) TYPE n,          " Record position for hrly WT
      g_cnt_hrly(2) TYPE n,          " Record position for hrly WT
      g_cnt_inc(2) TYPE n,          " Record position for inc WT
      g_cnt_lng(2) TYPE n,          " Record position for lng WT
      g_cnt_ret(2) TYPE n,          " Record position for ret WT
      g_wtype(11)   TYPE c,          " Wage type
      g_wrate(11)   TYPE c,          " Wage rate
      g_ht510_rate TYPE betrg,      " Default rate for WT0011 from T510
      g_maxrate_inc TYPE betrg,      " Maximum Incumbency Rate
      g_maxrate_lng TYPE betrg,      " Maximum Longevity Rate
      g_maxrate_ret TYPE betrg.      " Maximum Retention Rate
                  D A T A   D E C L A R A T I O N                    *
DATA:
      it_9006       TYPE TABLE OF pa9006,
      st_9006       TYPE pa9006,
      i0008         TYPE p0008,
      st_grdcode    TYPE zthhr_grdcode.
                  F I E L D    S Y M B O L S                         *
FIELD-SYMBOLS: <fs_wtype> TYPE ANY, " Used for Wage Type
                 <fs_wrate> TYPE ANY. " Used for Amount
                  C O N S T A N T S                                  *
CONSTANTS:
    c_molga_10   type molga value '10',    " Country grp for US
    c_hlgar_0011 TYPE lgart VALUE '0011', " Hourly Wage Type
    c_ilgar_0012 TYPE lgart VALUE '0012', " Incumbent Wage Type
    c_llgar_0147 TYPE lgart VALUE '0147', " Longevity Wage Type
    c_rlgar_01e0 TYPE lgart VALUE '01E0', " Retention Wage Type
    c_subty_inc TYPE subty VALUE '1',     " Subtype for Incumbency
    c_subty_lng TYPE subty VALUE '4',     " Subtype for Longevity
    c_subty_ret TYPE subty VALUE '5'.     " Subtype for Retention
                  P R O C E S S I N G                                *
Typecast PRELP to PNNNN structure
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
      prelp = innnn
    IMPORTING
      pnnnn = i0008.
Refresh & Clear Process variables.
CLEAR: g_lga, g_count, g_cnt_blank, g_cnt_hrly, g_cnt_inc,
          g_cnt_lng, g_cnt_ret, g_wtype, g_wrate, g_maxrate_inc,
          g_maxrate_lng, g_maxrate_ret.
Populate all unexpired & applicable records of IT9006 of subtype:
Incumbency, Longevity and Retention
REFRESH: it_9006.
SELECT * FROM pa9006 INTO TABLE it_9006
          WHERE pernr EQ i0008-pernr
            AND begda LE i0008-begda
            AND endda GE i0008-begda
            AND ( subty EQ c_subty_inc
            OR    subty EQ c_subty_lng
            OR    subty EQ c_subty_ret )
            AND zapplflg EQ 'X'.
Sort IT9006 Table descending based on Amount
SORT it_9006 BY zwage zaddamt DESCENDING.
Check for validity of Pay Scale Group & Level
SELECT * FROM zthhr_grdcode UP TO 1 ROWS
                  INTO st_grdcode
                 WHERE trfgr = i0008-trfgr
                   AND trfst = i0008-trfst.
ENDSELECT.
IF sy-subrc EQ 0.
If valid, read the Maximum Incumbency Rate
    READ TABLE it_9006 INTO st_9006
                       WITH KEY zwage = c_ilgar_0012
                                zgrdcode = st_grdcode-grdcode
                       TRANSPORTING zaddamt.
    IF sy-subrc EQ 0.
      g_maxrate_inc = st_9006-zaddamt.
    ENDIF.
ENDIF.
Get Max Longevity rate
READ TABLE it_9006 INTO st_9006 WITH KEY zwage = c_llgar_0147
                     TRANSPORTING zaddamt. " to g_maxrate_inc.
IF sy-subrc EQ 0.
    g_maxrate_lng = st_9006-zaddamt.
ENDIF.
Get Max Retention rate
READ TABLE it_9006 INTO st_9006 WITH KEY zwage = c_rlgar_01e0
                     TRANSPORTING zaddamt. " to g_maxrate_inc.
IF sy-subrc EQ 0.
    g_maxrate_ret = st_9006-zaddamt.
ENDIF.
CLEAR : g_count, g_cnt_blank, g_cnt_hrly, g_cnt_inc,
          g_cnt_lng, g_cnt_ret.
Check Infotype 0008 Wagetype entries
DO 40 TIMES
      VARYING g_lga FROM i0008-lga01 NEXT i0008-lga02.
    g_count = g_count + 1.
    IF NOT g_lga IS INITIAL.      " Fill max no of field filled
      g_cnt_blank = g_count.
    ENDIF.
    IF g_lga = c_hlgar_0011.      " Get Rec Pos for Hrly WT
      g_cnt_hrly = g_count.
    ELSEIF g_lga = c_ilgar_0012. " Get Rec Pos for Inc WT
      g_cnt_inc = g_count.
    ELSEIF g_lga = c_llgar_0147. " Get Rec Pos for Lng WT
      g_cnt_lng = g_count.
    ELSEIF g_lga = c_rlgar_01e0. " Get Rec Pos for Ret WT
      g_cnt_ret = g_count.
    ENDIF.
ENDDO.
g_cnt_blank = g_cnt_blank + 1. " Next Avl. Pos for WT entry
Incumbency Processing
0011 and 0012 both not found
IF g_cnt_hrly = 0 AND g_cnt_inc = 0.
Do Nothing
0011 Not found but 0012 found
ELSEIF g_cnt_hrly = 0 AND g_cnt_inc > 0.
    CONCATENATE 'I0008-LGA' g_cnt_inc INTO g_wtype.
    CONCATENATE 'I0008-BET' g_cnt_inc INTO g_wrate.
    ASSIGN (g_wtype) TO <fs_wtype>.
    ASSIGN (g_wrate) TO <fs_wrate>.
    IF g_maxrate_inc <> 0.
      <fs_wtype> = c_ilgar_0012.
      <fs_wrate> = g_maxrate_inc.
    ELSE.
    If WT0012 has expired in IT9006, revert to WT0011 with
      default rate from T510
      <fs_wtype> = c_hlgar_0011.
      SELECT betrg FROM t510 UP TO 1 ROWS
                   INTO g_ht510_rate
                  WHERE molga = c_molga_10
                    AND trfar = i0008-trfar
                    AND trfgb = i0008-trfgb
                    AND trfgr = i0008-trfgr
                    AND trfst = i0008-trfst
                    AND lgart = c_hlgar_0011
                    AND begda LE i0008-begda
                    AND endda GE i0008-endda.
      ENDSELECT.
      IF sy-subrc = 0.
        <fs_wrate> = g_ht510_rate.
      ENDIF.
    ENDIF.
0011 found but 0012 Not found
ELSEIF g_cnt_hrly > 0 AND g_cnt_inc = 0.
    IF g_maxrate_inc <> 0.
    Update 9006 amount if greater. And Replace 0011 with 0012
      CONCATENATE 'I0008-LGA' g_cnt_hrly INTO g_wtype.
      CONCATENATE 'I0008-BET' g_cnt_hrly INTO g_wrate.
      ASSIGN (g_wtype) TO <fs_wtype>.
      ASSIGN (g_wrate) TO <fs_wrate>.
      IF <fs_wrate> < g_maxrate_inc.
        <fs_wtype> = c_ilgar_0012.
        <fs_wrate> = g_maxrate_inc.
      ELSE.
      Do Nothing
      ENDIF.
    ELSE.
    Do Nothing
    ENDIF.
0011 and 0012 both found
ELSEIF g_cnt_hrly > 0 AND g_cnt_inc > 0.
Rate in IT9006 exists.
    IF g_maxrate_inc <> 0.
    Remove existing 0011
      CONCATENATE 'I0008-LGA' g_cnt_hrly INTO g_wtype.
      CONCATENATE 'I0008-BET' g_cnt_hrly INTO g_wrate.
      ASSIGN (g_wtype) TO <fs_wtype>.
      ASSIGN (g_wrate) TO <fs_wrate>.
    If hourly rate < Max Inc Rate, Clear Hrly WT & update WT0012
      IF <fs_wrate> LT g_maxrate_inc.
        CLEAR : <fs_wtype>, <fs_wrate>.
      Update existing 0012 with new amount
        CONCATENATE 'I0008-LGA' g_cnt_inc INTO g_wtype.
        CONCATENATE 'I0008-BET' g_cnt_inc INTO g_wrate.
        ASSIGN (g_wtype) TO <fs_wtype>.
        ASSIGN (g_wrate) TO <fs_wrate>.
        <fs_wtype> = c_ilgar_0012.
        <fs_wrate> = g_maxrate_inc.
    If hourly rate > Max Inc Rate, clear WT0012
      ELSE.
        CONCATENATE 'I0008-LGA' g_cnt_inc INTO g_wtype.
        CONCATENATE 'I0008-BET' g_cnt_inc INTO g_wrate.
        ASSIGN (g_wtype) TO <fs_wtype>.
        ASSIGN (g_wrate) TO <fs_wrate>.
        CLEAR : <fs_wtype>, <fs_wrate>.
      ENDIF.
Rate in IT9006 do not exists.
    ELSE.
    Let 0011 be there but remove 0012.
      CONCATENATE 'I0008-LGA' g_cnt_inc INTO g_wtype.
      CONCATENATE 'I0008-BET' g_cnt_inc INTO g_wrate.
      ASSIGN (g_wtype) TO <fs_wtype>.
      ASSIGN (g_wrate) TO <fs_wrate>.
      CLEAR : <fs_wtype>, <fs_wrate>.
    ENDIF.
ENDIF.
Longevity Processing
Wage type 0147 already exists
IF g_cnt_lng > 0.
    CONCATENATE 'I0008-LGA' g_cnt_lng INTO g_wtype.
    CONCATENATE 'I0008-BET' g_cnt_lng INTO g_wrate.
    ASSIGN (g_wtype) TO <fs_wtype>.
    ASSIGN (g_wrate) TO <fs_wrate>.
IT9006 contains the rate.
    IF g_maxrate_lng > 0.
    Update the existing amount
      <fs_wtype> = c_llgar_0147.
      <fs_wrate> = g_maxrate_lng.
    ELSE.
    Remove Wage Type 0147
      CLEAR <fs_wtype>.
      CLEAR <fs_wrate>.
    ENDIF.
Currently no 0147 exists
ELSE.
IT9006 contains the rate.
    IF g_maxrate_lng > 0.
    Add 0147 with amount
      CONCATENATE 'I0008-LGA' g_cnt_blank INTO g_wtype.
      CONCATENATE 'I0008-BET' g_cnt_blank INTO g_wrate.
      ASSIGN (g_wtype) TO <fs_wtype>.
      ASSIGN (g_wrate) TO <fs_wrate>.
      <fs_wtype> = c_llgar_0147.
      <fs_wrate> = g_maxrate_lng.
      g_cnt_blank = g_cnt_blank + 1.
IT9006 does not contain the rate.
    ELSE.
    Do Nothing
    ENDIF.
ENDIF.
Retention Processing
Wage type 01E0 already exists
IF g_cnt_ret > 0.
    CONCATENATE 'I0008-LGA' g_cnt_ret INTO g_wtype.
    CONCATENATE 'I0008-BET' g_cnt_ret INTO g_wrate.
    ASSIGN (g_wtype) TO <fs_wtype>.
    ASSIGN (g_wrate) TO <fs_wrate>.
IT9006 contains the rate.
    IF g_maxrate_ret > 0.
    Update the existing amount
      <fs_wtype> = c_rlgar_01e0.
      <fs_wrate> = g_maxrate_ret.
    ELSE.
    Remove Wage Type 01E0
      CLEAR <fs_wtype>.
      CLEAR <fs_wrate>.
    ENDIF.
Currently no 01E0 exists
ELSE.
IT9006 contains the rate.
    IF g_maxrate_ret > 0.
    Add 01E0 with amount
      CONCATENATE 'I0008-LGA' g_cnt_blank INTO g_wtype.
      CONCATENATE 'I0008-BET' g_cnt_blank INTO g_wrate.
      ASSIGN (g_wtype) TO <fs_wtype>.
      ASSIGN (g_wrate) TO <fs_wrate>.
      <fs_wtype> = c_rlgar_01e0.
      <fs_wrate> = g_maxrate_ret.
      g_cnt_blank = g_cnt_blank + 1.
IT9006 does not contain the rate.
    ELSE.
    Do Nothing
    ENDIF.
ENDIF.
Typecast the PNNNN to PRELP structure
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
      pnnnn = i0008
    IMPORTING
      prelp = innnn.
Show Data Again Switch to display the field values again
show_data_again = 'X'.
ENDIF.

To include or not to include whole package ?

Hi,
I have created three classes for an applet called ChartingApplet in VisualAge IDE. I utilised an opensource charting package, but only using approx. 15 classes from that com.chartingpackage.classes .. package (perhaps 80k out of total 500k). Now I could put that package from which I got those 15 classes in a JAR to be downloaded by the browser but that is a hefty download !! I don't want to have to waste bandwidth and download time for people viewing my applet by making them download the entire 500k of the opensource com.chartingpackage.classes package.
Is the normal method of dealing with this situation to pick those select 15 class files out of the com.charting... package (possible with IBM VisualAge) and put them inside my jar archive for my ChartingApplet?
I just can't believe that there isn't a better way of doing this; I had to spend some time going through the Javadoc for the few classes I need making sure that I did not miss any out of my JAR file. I mean to hand pick 15 classes out of 700 or more (in the packages I utilised) is not so bad but that is not such an extensible technique ... what if I had to hand pick 155 classes from 2000? Please tell me there is a better way of doing this?
Or is it the case that those 15 classes are automatically compiled and included WITH my code from the import statements I make in those three .java files which I crafted. I am a little confused because in C++ when you make an executable file ALL of the code from the library files that YOUR classes need are included (or 'linked' to use the official jargon) with your own classes when they are compiled. Now I just want to check ... this is NOT the same for Java is it ?
What should I do here? Surely I don't have to include the entire wapping great 500K (700 classes) just for the sake of 15 or so classes I used.
Please help. Thanks.
K

Can noone explain what the standard way around this is when using internet deployed applet and JAR file utilising 3rd party classes?
Please help ..... someone must have come up against this problem and solved it before. I can't believe that I'm having to ask this in a forum ... I mean the answer should be on the rest of the site somewhere but I've not found it yet.
Does anyone know of an OPTIMISER that will deal with redundant classes taking into account inter-class dependancies .... (JOPT does not do this) or am I missing some easier solution to this .... or are other people simply using a hand-cranking mechanism where you take classes you can obviously see you need and then continuously recompile until you have ALL the 3rd party classes required ( from unadvertised dependancies)? There must be a smarter/quicker way.
Thanks for your help,
K

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

"include directive or jsp:include "

Hi,
Which amongst <%@ include file="header.jsp" %> and
<jsp:include page="header.jsp"/>to be used, when performance is taken into account.

Code copy from serverside.com
Is it the same as --> jsp:include and %@ include directive.
Actually, <jsp:include> vs. <%@ include %> is a different story.
<%@ include %> is a "compile-time" include. The included file is inserted into the JSP when the JSP compiles.
<jsp:include> is a "run-time" include. If JSP-1 includes JSP-2, JSP-2 is invoked when JSP-1 executes, and the output of JSP-2 is inserted into the output stream of JSP-1.
The run-time include runs a bit slowly, but can save a lot of system memory, so in general, the run-time include is preferable. Only use the compile-time include if the include code must be in the same page.
For example, if you want to use an include that defines a bunch of tag libraries with the taglib directive, it will have to be a compile-time include. If you just want to insert a standard header and footer in your page, a run-time include will be more effecient.
I hope its enough for you to get an clear cut idea,

Transaction code for vendor account statement for perticular duration

Transaction code for Accounts payable
statement for perticular date
duration...... (from date and to date)

Hi,
You can use the following reports, there are quite a few other reports but the ones below can be used easily to tweak to your requirement using the many selection and display options available:
1. S_ALR_87012103 - List of Vendor Line Items
2. FBL1N
Cheers.

LabView 2010 Application Builder for EXE Always Included files are not Included

In LabVIEW 2010 F2, When I am using the Application Builder to build an EXE file, I have listed 10 or so files to Be "Always Included". But when I Explore the directory where the EXE was built, those "Always Included" files are not there or in any subdirectory under the EXE file.
This frequently makes my EXE file not work properly because important files are missing. I have to spend extra debugging time to find out the the cause of my problem is missing files that the Application Builder should have transferred "Always".
Why did the Application Builder, when building an EXE target, not include the files that should be "Always Included"?
Why does the Application Builder ignore these files specifications?

Dennis Knutson wrote:
The build does include files you select. Post an example project with a small VI and some separate files where this does not happen.
No, it does not appear that all of the files that I listed in the "Always Include" list are copied during the Build process to the Build directory or any subdirectory under that.
The Build Source Files.jpg file shows most of the list of the files that should be "Always Included". Notice the .VI and .ctl files that are listed
The Build Directory.jpg file shows the file in the Build directory that were built.
The Data Directory.jpg file shows the data directory under the Build directory and may include some of the files listed in the "Always Include", but not all of them.
The other subdirectories under the Build directory were created by me and do not include any files that were copied during the Build process.
So not ALL of the files that were included in the "Always Include" list were copied into the Build directory area as expected. ALL of the files that are listed as "Always Include" should be copied, if they exist. Those files existed when then were selected for the List and they existed at the time of the Build.
I can not include an example project that demonstrates this. I am prevented from doing so by the terms of an NDA. You are going to have to take my word that this event is real and happens the same way every time. This information should be sufficient for someone to investigate why do not ALL of the files listed in the "Always Include" list are copied into the Build directory area regardless of the file type or contents.
Attachments:
Build Source Files.jpg ‏151 KB
Build Directory.jpg ‏125 KB
Data Directory.jpg ‏131 KB

Do we have INCLUDE=JAVA CLASS AND INCLUDE=JAVA SOURCE OPTION IN DATA PUMP

Hi All ,
Can any one please tell me ,
how to import only java class and java source from datapump export file.
Include=java class or include=java source is not working ..
Thanks in advance,
Sanjeev.

Duplicate post.
datapump include option.
Lock this thread

Using #include or EXEC SQL include

Hi
I havent much worked with Pro C so I have question
I need to modify a Pro C file to include a new lib,
So is it better to use:
EXEC SQL INCLUDE multibyte_chars.ph;
OR
#include "multibyte_chars.ph"Are both basically doing the same thing?
Please reply

Hi,
Pro C is not a Sun Studio product.
Searched google.com, found this Oracle FAQ: Pro *C:
http://www.db.cs.ucdavis.edu/public/oracle/faq/proc.html
Rose

Including code in a include statement

Similar Messages

Maybe you are looking for