Including LZONE in the Priccing Catalog

I want to include LZONE field in the Pricing Catalog. I know that i have to include the structure Komkaz or Kompaz for it. LZone in the transportation zone field on the customer master. This is prompting me to modify the structure KOMKAZ instead of KOMPAZ.
Once i generate this table, I have an access sequence assigned to it and it should derive pricing thru an access sequence. After mofifying the KOMKAZ structure which is for header fields, can i use it as item condition? (Remember Header conditions can be entered only manually). or should i modify the structure KOMPAZ instead of KOMKAZ.
Thanks for letting me know.

Good Afternoon,
Please the the documentation under the customizing path:
IMG
-> Sales and Distribution
     -> System Modifications
        -> Create New Fields (Using Condition Technique
           -> New Fields For Pricing
                click on the paper icon.
The added fields must has name sarting wiht 'ZZ' or 'YY'.
So I strongly advice to change it.
Then they must be filled inside userexit
USEREXIT_PRICING_PREPARE_TKOMK/USEREXIT_PRICING_PREPARE_TKOMP
in program MV45AFZZ for sales order and RV60AFZZ for invoices.
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Similar Messages

ALV report using the field catalog

which is the quickest way to generate an ALV report using the field catalog merge. without needing to build the field catalog manually .
is it easier to create a structure and passe it in the field catalog merge . if yes can i have an example plzzzz

hI
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o Performance is affected since the code of the table definition must
always be read and interpreted at runtime.
o Dictionary references are only considered if the keywords LIKE or
INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
                         Data declaration
                         Data retrieval
                         Build fieldcatalog
                         Build layout setup
*& Report ZDEMO_ALVGRID                                               *
*& Example of a simple ALV Grid Report                                 *
*& The basic requirement for this demo is to display a number of       *
*& fields from the EKKO table.                                         *
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
*            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL

How can I use the same catalog on PC and MAC?

I keep my catalog and photos on an external hard drive. I have both PCs and a MAC and I would like to be able to access the same catalog of photos on both my PC and my MAC using LR2. I am using v 2.3. The problem is the location of the photo is referenced differently on the PC than on the MAC. Does any one have any idea how I might accomplish this?
If this is impossible, then can anyone at least tell me how I can convert my catalog file (lrcat) so that the location of photos that are currently referenced using a drive and path (eg, p:\myphotos\...) to a format that can be used on the MAC so Lightroom running on the MAC will know about the photos on my external drive?

I have figured out the answer to my question. Thanks to those who tried to help.
First of all, I found that Lightroom's 'Locate folder' didn't work for me. It might have if I had tried that the first time I tried to convert things, but I had tried to locate a few photos already, so I was always told that the folder I was trying to locate was already in the catalog.
Breifly, what did work was to locate individual photos using the ? you see on the photo when in grid mode in the Library view and specify that other photos nearby should also be relocated. By choosing a photo at the top of the directory tree, Lightroom will search for all photos in the directory containing your photo and all subdirectories of it.
The details:
What did work, was to individually locate photos using the ? you see on the photo when in grid mode in the Library view. If you turn on the choice to locate other photos nearby, then Lightroom will search for other photos in this directory and in all subdirectories of the one containing your located photo. This was a good start, but the problem for me is that my photos are stored in many directories below an organizing directory (eg, \2009\2009-01-02) and the organizing directory (\2009 in this example) does not contain any photos to locate. Furthermore, each of my orgainizing 'yearly' directories are organized in one top directory (\Photos) that also has no photos in it to locate. So, to make use of this feature, I had to create a photo in at least the top directory that I could use for finding the rest. I call this a 'FindMe' photo. I found that it needed to have a totally different file name than any other photo in my library. So, I created on be exporting another photo (with very poor resolution to keep the size small) and giving it a name of FindMe-<directory_name>. I also found it helpful to give it a caption of 'FindMe' to use in locating the photo. I imported this photo into the top directory (\Photos) on the PC.
The next step was to open the .lrcat on the Mac. Looking at the grid of all photos, I narrowed down the photos to just those that had a caption of 'FindMe' or a file name of FindMe. That located the photo in \Photos that I could use to start the search for all the rest. (Note that giving your locating photo a name you can easily find is important because all you will be able to see when you look at all of the photos is just a blank square and I couldn't find any way to tell Lightroom to only show me photos in this one directory, excluding subdirectories (this is a feature they should add to Lightroom).)
Now theoretically, this trick should have located all of my photos. However, in a library of over 55,000 photos, there's bound to be some problems. It turns out that my library that started in Adobe Photoshop Elements had some entries that didn't point to the file properly...in fact there was a blank space at the beginning of the filename. We had caught this problem and renamed the file on the hard drive properly, but a few catalog entries had missed the correction of the filename before we converted this to a Lightroom catalog. (Elements tolerated the blank space in the file name, Lightroom does not). This caused Lightroom to hang when it was locating file. I solved this problem by fixing a lot of these in the PC catalog. (This took some doing, because Lightroom would first give me a ? to let me locate the file, but it quickly realized it had a problem and changed the ? to a danger sign that would not allow me to do anything with the photo. So, I had to act quickly to correct the problem with these photos.) That fixed a lot, but there were apparently still some problems in the library that caused Lightroom to hang when locating photos. Also, as the number of photos that were properly relocated grew, I found that it took too long to let Lightroom try to fix the entire library. So, I started creating FindMe photos in the few remaining 'yearly' organizing directories and locating files in each of these. That pretty much did the trick.
My wishlist for Lightroom new features:
1. I would like it if I could tell Lightroom to locate all photos within a directory (with the choice to includ subdirectories) in a particular place. By this, I mean to go from the directory, not from a specific photo within a directory.
2. I want to be able to tell Lightroom to only display photos within a particular directory (excluding those in the subdirectory). This would make it a lot easier to locate my 'find me' photos and would eliminate the need to make the so identifiable.

Cannot open the message catalog "man" for locale "es_ES.UTF-8"

Hi,
When using the command line and I type a command (for example "man ls") I get the following message:
Cannot open the message catalog "man" for locale "es_ES.UTF-8"
(NLSPATH="<none>")
Then I get man pages in English instead of my language.
Could you please help?
Many thanks!

I post this just in case someone has the same problem. Finally I was digging into /usr/sare/man and I found that apple just includes translations in man for English, French, Italian, Russian and Polish as you can see in the following listing of files:
fr it.UTF-8 man5 mann ru.UTF-8
fr.ISO8859-1 man1 man6 pl whatis
fr.UTF-8 man2 man7 pl.ISO8859-2
it man3 man8 pl.UTF-8
it.ISO8859-1 man4 man9 ru.KOI8-R
I don't know if it is possible to download the spanish translation from somewhere. If someone knows please let me know.
Hope this helps to someone in the future.
Cheers

PERFORMING FULL RECOVERY WHEN THE RECOVERY CATALOG AND CONTROLFILE ARE LOST

제품 : RMAN
작성날짜 : 2002-05-30
PERFORMING FULL RECOVERY WHEN THE RECOVERY CATALOG AND CONTROLFILE ARE LOST
===========================================================================
PURPOSE
Recovery Catalog와 Controlfile이 손상되었을 때 Oracle9i의 new feature인
Controlfile Autobackup을 이용하여 full recovery를 수행하는 방법을 알아본다
EXPLANATION
Catalog와 Controlfile이 모두 손상되었을 경우 full recovery를 수행할 수 있도록
하기 위해 oracle9i부터 Controlfile Autobackup이라는 New feature를 제공한다.
이 Feature가 활성화되면 RMAN은 자동으로 특정 형식(specific format)으로
controlfile을 backup한다 나중에 RMAN은 Recovery catalog를 access하지 않고도
이 backup을 인식할 수 있다. 이 형식은 "%F"라는 variable을 포함하는데
이 variable은 중요한 정보인 DATABASE ID를 포함하고 있다.
이것은 다음과 같은 CONFIGURE 명령을 사용하여 Turn-on 될 수 있다.
RMAN> configure controlfile autobackup on;
활성화시킨 후에 controlfile autobackup의 format을 변경할 수 있다. 그러나
이것은 반드시 variable "%F"를 포함해야만 한다. 그렇지 않으면 다음과 같은 Error
를 만나게 된다.
RMAN> configure controlfile autobackup format for
2> device type disk to 'c:\backups\%U';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00579: the following error occurred at 01/31/2002 11:57:21
RMAN-03002: failure during compilation of command
RMAN-03013: command type: configure
RMAN-06492: controlfile autobackup format "c:\backups\%U" must specify a "%F"
format specifier
%F 는 RMAN이 recovery catalog 없이 backup piece를 인식하도록 Key이다.
이 Feature가 활성화 된 후에 RMAN은 BACKUP 명령을 수행할 때마다 controlfile에
대해서 별도의 backup을 수행한다. 이전에는, controlfile 은 오직 system
tablespace가 backup되는 경우에만 자동으로 backup되었다.
Database Backup은 아래와 같은 log를 출력한다.
RMAN> backup database;
Starting backup at 31-JAN-02
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=12 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\ORADATA\PROD\SYSTEM01.DBF
input datafile fno=00002 name=C:\ORACLE\ORADATA\PROD\UNDOTBS01.DBF
input datafile fno=00005 name=C:\ORACLE\ORADATA\PROD\EXAMPLE01.DBF
input datafile fno=00006 name=C:\ORACLE\ORADATA\PROD\INDX01.DBF
input datafile fno=00008 name=C:\ORACLE\ORADATA\PROD\USERS01.DBF
input datafile fno=00003 name=C:\ORACLE\ORADATA\PROD\CWMLITE01.DBF
input datafile fno=00004 name=C:\ORACLE\ORADATA\PROD\DRSYS01.DBF
input datafile fno=00007 name=C:\ORACLE\ORADATA\PROD\TOOLS01.DBF
channel ORA_DISK_1: starting piece 1 at 31-JAN-02
channel ORA_DISK_1: finished piece 1 at 31-JAN-02
piece handle=C:\BACKUPS\01DFKAIH_1_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:56
Finished backup at 31-JAN-02
Starting Control File Autobackup at 31-JAN-02
piece handle=C:\BACKUPS\C-4159396170-20020131-00 comment=NONE
Finished Control File Autobackup at 31-JAN-02
Note:
Controlfile backup은 backup의 끝에서 수행된다.
그리고 이 backup piece name의 두번째 string은 dbid이다(4159396170)
Current controlfile이 database와 함께 손실되고 Recovery catalog도 손상되어
사용할 수 없게 되었을 때 controlfile autobackup이 controlfile을 restore하기
위해 사용될 수 있다. restore된 controlfile은 db를 mount하고 datafile들을
restore하기 위해 사용될 수 있다.
Controlfile autobackup을 이용하여 full recovery를 수행하기 위해서는 아래와
같은 과정을 수행하면 된다.
1. Target instance를 위한 new init.ora를 생성한다. backup이 있다면 이것을
사용할 수 있다.
2. Startup nomount your new instance.
3. RMAN은 시작하나 어떤 connect statement도 수행하지 않는다.
4. RMAN prompt상에서 DBID를 설정한다. 만약 DBID를 모르면 controlfile autobackup
의 이름으로부터 이것을 알 수 있다.
RMAN> set dbid=4159396170;
5. Dbid를 설정한 후에 nomount로 startup한 target instance에 connect한다.
RMAN> connect target /
6. 만약에 backup이 disk상에 있고 controlfile autobackup을 non-default location
으로 지정하였다면 파일을 다음과 같은 위치로 옮겨 놓는다
ON UNIX : ORACLE_HOME/dbs
ON WINDOWS: ORACLE_HOME/database
RMAN은 controlfile autobackup을 찾기 위해 위 directory를 검색한다.
만약 controlfile autobackup location을 바꾸지 않으면 위 directory안에
backup이 생성되게 된다.
만약에 backup이 tape에 있다면 restore시 channel과 device를 기술하기 위해서
run block을 사용해야 한다. database가 mount되어 있지 않기 때문에
default device와 channel을 설정할 수 없다.
RMAN> run { allocate channel c_1 type 'sbt_tape'
parms "ENV=(NB_ORA_SERV=rm-wgt)";
restore controlfile from autobackup;}
7. Restore the controlfile:
RMAN> restore controlfile from autobackup;
8. Mount the database from the restored controlfile:
RMAN> alter database mount;
9. Restore datafiles:
RMAN> restore database;
10. file들을 restore한 후에 recovery를 수행할 수 있다.
이때 current online redo log가 없고 또한 backup controlfile을 사용하기
때문에 incomplete recovery를 수행해야 한다. 이를 수행하기 위해서는
"UNTIL TIME"을 설정해야 하고 open시에는 resetlogs를 사용해야 한다.
RMAN> set until time=<time stamp>;
RMAN> recover database;
RMAN> alter database open resetlogs;
REFERENCE DOCUMENT
NOTE:174623.1

BACKUP Command Behavior
ON
If the backup includes datafile 1, then RMAN does not automatically include the current control file in the datafile backup set. Instead, RMAN writes the control file and server parameter file to a separate autobackup piece.
Note: The autobackup occurs regardless of whether the BACKUP or COPY command explicitly includes the current control file, for example, BACKUP DATABASE INCLUDE CURRENT CONTROLFILE.
OFF
If the backup includes datafile 1, then RMAN automatically includes the current control file and server parameter file in the datafile backup set. RMAN does not create a separate autobackup piece containing the control file and server parameter file.
BUT Dear Mohammed,
It is not working accordingly. what I did is :-
1. I switched off the AUTOBACKUP
2. Then I took whole database backup, that means it included File # 1
3. But according to above it is going to include autobackup of controlfile and spfile in the same backupset .
4. But when I asked it to restore controlfile from autobackup it said NO AUTOBACKUP FOUND.
COULD YOU PLEASE HELP ME ONCE AGAIN DEAR.
If it works accroding to above then it should have my Autobackup.
Regards
Harpreet Singh

If I want to order by dateAdded to I have to include it in the select statement like

If I do this:
<cfquery name="chart" datasource="#datasource#">
select behaviourID,score, dateAdded2 = convert(varchar,
dateAdded , 101)
from staff_charts_data
where userID =
<cfqueryparam value="#arguments.userID#"
cfsqltype="cf_sql_integer"> AND
NOT score = 5
</cfquery>
If I want to order by dateAdded to I have to include it in
the select statement like so:
<cfquery name="chart" datasource="#datasource#">
select behaviourID,score, dateAdded2 = convert(varchar,
dateAdded , 101),dateAdded
from staff_charts_data
where userID =
<cfqueryparam value="#arguments.userID#"
cfsqltype="cf_sql_integer"> AND
NOT score = 5
</cfquery>

you should be able to order by dateAdded without it being in
the select clause. The only time the order by field has to be in
the select clause is when your query has an aggregate and group by
clause, like this:
select field1, field2, max(field3) as youralias
from sometables
where whatever
group by field1, field2
order by ???
You can only order field1, field2, max(field3) or youralias.
You can't order by field4.

Field not present in the Field Catalog also getting displayed in the ALV

Hi Experts,
I am trying to display some to an ALV grid. But since i don't need all the fields from the internal table, i have deleted those fields from the field catalog. But in-spite of doing this the field heading is still getting displayed. I am not able to figure out the reason for this. Also note that the i have not deleted that field from my internal table which contains the actual data.
Regards,
Kush

Hi,
If your giving your internal table to the below field then ALV try to disply those many coloumn.
wa_fcat-tabname = 'IT_OUTPUT'.
You can add for that field name.
wa_fcat--NO_OUT = 'X'.
Please check the field name on the output will be same as before column name .

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.

What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT

"Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect? URL: /includes/javascript/xajax_js/xajax.js". other posters with a xajax error on this board got the response to go look for developer resources. (i'm not a developer)

I'm on a mac running 10.6.8, was using Firefox 6.02 when the problem started, i performed a clean install of 7.01, installed the latest Flashplayer, and reinstalled java (the 10.6.5 update file from apple's site).
I seem able to load video at youtube.com, and was able to load web-based irc chatrooms at ircchat.tv. however, at jamplay.com a paid member site, all of the lessons are flash video, and there's a live video feed chat room that is also flash based, and I am not able to view this content. the video content pops up the error message "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect?
URL: /includes/javascript/xajax_js/xajax.js" and the clicking on the "launch chatroom" button does exactly nothing.
I have contacted the jamplay site team but their recommendations are the steps I have already taken, mentioned above, that did not resolve the issue.
some links to content on their site visible without being a member:
http://www.jamplay.com/
this one has a flash interface that, if things were working, would have a video in the center and members and staff talking abouth that area of the site when you click on one of the title buttons. Now that I am having this problem, nothing is clickable and there's no indication that there should be a video in the center. The error message regarding xajax does not come up at all.
http://www.jamplay.com/guitar-lessons/beginners/1/527-16-circle-of-fifths
same thing. video content is missing, xajax error does not appear.
http://www.jamplay.com/live
when I load these all content except the video loads on the page. this page does not give me the error at all, just does not load the video
I can't seem to recreate the actual error without being logged in as a member of the site.
The apple support team gave me a one-time free suppport ticket to troubleshoot an ethernet issue I was having. Unfortunately, the databases I removed were not deemed either by apple or me to be noteworthy or necessary to retain (all of them were for software I not longer have or use). I don't know which plist file might have been the one I need now. I did reinstall the java and flash items. The only other item that I think it might be is a set of belkin router software that I uninstalled because i'm not using any belkin hardware anymore.
If someone has any kind of idea I would be most appreciative.

That's a comment in the file. It has no effect at all.

How to use the Include Statement in the BADI

Dear All,
I am trying to implement the BADI. So i need to use the Include in the BADI.
How to use the Include statement in the BADI. I cant able to use it in the Public, Private and protected statement.
Where should i mention that,,,,
Thanks
Yogesh

Hi Sharat,
Thanks for your reply.
I need to use the BADI HRWPC_PCR_APPR_FORM. In which the values are available in the Container. So if i need to use the container values then i need to use that include <cntain>.
Is there any possible ways to make it.
Thanks
Yogesh

Can I move the Lightroom Catalog from one location to another?

Lightroom by default, places the Lightroom Catalog in the Pictures folder on my PC. My image library though, is located on an external hard drive. I've read that it is better to have the Catalog at the same location to avoid disconnected images, which sounds reasonable. Is it feasable to move the Catalog over to the same drive as my image library, or will that cause a problem? In other words would I need to start over again and create a new Catalog on the external drive? I know this sounds like a dumb question, but I've learnt to my cost that the obvious solution isn't necessary the correct one.

For better performance it is preferable to have the catalog located on an internal hard drive. By default the catalog and the preview files have to be located in the same folder since there is continual read/write taking place while working in Lightroom. Lightroom does not make any changes to the original files so its fine for them to be located on another hard drive internal or external. Lightroom loves lots of hard disk space to operate so if your catalog is on an internal drive make sure it not starved for disk space.
However its ok for your catalog/previews files to reside on an external HDD with your original photo files.
Your photo files can reside on a HDD conected to a network but your catalog and preview files cannot be located on a network.
e.g I have my catalog / previews on the main HDD with my operating system with over 50% free disk space. My Photo files are on a secondary internal HDD with over 75% free disk space. I back up to external HDD.

How do I add products to the existing catalog?

I logon to Catalog management tool, but nowhere do I see how do I see option to
edit the existing catalog(the sample catalog, part of commerce server template).
(I have tried logging as administrator/password), search does not show me the
sample store products like guns, bench.
Any clue anybody?
Really appreciate your help.
Thanks,
Shashi

Shashi,
If you go to the catalog admin tools and search on "*" for example you
should see all the catalog items. Please describe in detail what you are
doing.
Besides that, what differentiates one catalog for one domain with theother catalog
for another domain?Baring other configuration changes - nothing. The catalog items are loaded
from the RDBMS, so if each domain is using the same sample data you should
see the same catalog.
Sincerely,
Daniel Selman
"Shashi Goli" <[email protected]> wrote in message
news:[email protected]..
>
Sameer,
I do see the products and categories in the commerce example browser whenI run
the corresponding server. There are no errors in the log too.
But when I click on the Admin link and search for the existing products Ican't
find any products/categories from the existing catalog, why is that? Ishould
be able to see them right?
Besides that, what differentiates one catalog for one domain with theother catalog
for another domain?
Thanks,
Shashi
"Sameer Sawant" <[email protected]> wrote:
Are you sure that the items you are looking for are in the catalog tables
can you see them from the commerce templates? Are there any exceptions
on
the server console or the in the log?
Sameer

Using a Mac and a Surface Pro with the same catalog?

I am using CC on my Mac as my primary computer. I'm thinking of getting a Surface Pro to use as a second computer.
1. Are there any issues with opening and saving a catalog back-and-forth between a Mac and a PC? I'm thinking of doing it via Dropbox.
2. Has anyone used LR on a Surface Pro? Can everything be done via touch? Does it work well? I'd like to mainly be able to go through all of my photos and tag and rate them on the Surface.
Thanks.

Using dropbox seems to be one of the choices people make when working with the same catalog on multiple computers. It reportedly works well as long as you ensure that you allow ample time for synchronization.
I cannot answer your question about the Surface Pro. You could download the trial version of Lightroom and evaluate for 30 days and then decide for yourself.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1

HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud. Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud.
Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

How to extend the product catalog in CRM?

Hi All
How do u extend the product catalog in CRM?
Anticipating a step-wise guidelines..
Thanks in Advance
Jaman
Message was edited by: Sap_Crm_Guy

Hi
Check this URL:http://help.sap.com/saphelp_crm50/helpdata/en/a8/abf837aea75351e10000009b38f8cf/frameset.htm
Hope it helps

Including LZONE in the Priccing Catalog

Similar Messages

Maybe you are looking for