Incoming VPN doesn't work with PAT over DHCP

I have an 1841 that uses PAT for outbound traffic.  External Fe0/0 port gets its IP via DHCP. 
ip nat inside source route-map NAT-MAP interface FastEthernet0/0 overload
I have an internal server that runs SSH so I have a port forwarding rule on the router:
ip nat inside source static tcp 172.16.32.3 22 interface FastEthernet0/0 22
Now I added VPN pool, but VPN clients cannot reach the server on port 22. 
The statement below would fix the problem:
ip nat inside source static tcp 172.16.32.3 22 <STATIC IP> 22 route-map NO_NAT-MAP extendable
If I understand correctly this statement is only available for STATIC IPs, in my case I get the IP from DHCP.  Anyone knows a workaround?
thanks!

Resolved!
It appears that he Scientific Atlantic modem than RCN provides needs a hard reset when switching routers. The way to do this is a careful sequence:
1. unplug ethernet to old router
2. unplug coax
3. power off for at least 60 seconds
4. plug in coax
5. power up and check for status lights
6. plug ethernet cable between the Time Capsule and the modem
This time it picked up the DHCP settings and hence works just fine. Phew! So, the problem was not with Apple but with RCN.
Jonathan

Similar Messages

  • Connection to VPN doesn't work with exclamation mark on Network symbol

    Hello everyone,
    I'm new to this forum and not really professional in VPN stuff, though I'm an experienced computer user and programmer. I'm using Cisco VPN
    5.0.07.0440-k9-x64 from the Paul Scherrer Institute on Windows 8 64-bit. The program was working previously fine, but at some point, whenever I connect to VPN and login, I lose connection to the internet, and nothing related to my internet connection work, and I see an exclamation mark on the wireless network symbol. And when I disconnect the VPN, I get everything back to normal.
    I got almost the same problem when I installed Kaspersky Internet Security due to some suspicion on security, but then I removed it and everything was back to normal. After that, the VPN worked for some time, and again didn't work anymore at some point. First thing I tried is disabling the Windows Firewall, and it didn't help.
    My network adapter is: Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter
    In my network adapter, I can't change the TCP/IP v4 Configuration. When I double click, it says something like: "For the configuration of TCP/IP, there must be a network device installed and activated" (The sentence is translated from German, my Windows is German).
    Is there like a "global reset" that would get the VPN to work again? What should I do?
    Please advise, and if you require any piece of information, let me know.
    Thank you.

    I'm using now VPNC on linux. No more cisco! Crappy program and crappy support!

  • RVL 200 VPN doesn't work with Windows 7 64

    hello partners and experts,
    We use the RVL 200 to establish VPN connections. Now we have one PC with windows 7, and there is the problem that there are error-messages when installing the xtunnel. we did it as an administrator.
    We use the virtual passage of the router.
    The Error Message: virtual passage Install Failed: Error Installing Virtual Passage Adapter!
    thanx a lot for your help
    Regards
    Andreas Pichler

    I've nearly the same problem with Windows 7, but also with Vista Buiness. Also using administrator account, IE8, trusted sites, ActiveX enabled ...
    Message: Virtual Passage Setup:
    Error: Virtual Passage not installed. Please install as administrator.
    thx for help, greetings,
    Herbert Gerstbauer..

  • VPN doesn't work

    I just switched from Cable Internet to Verizon high speed.  Internet and e-mail work fine, but my Cisco VPN doesn't work with Verizon.
     Thus I can't connect to my servers at work.
    I know my VPN works good because I travel alot and it works in every hotel I stay at, in fact I just tried it down the street through WiFi.
    Does anyone know the fix for this?

    Easy solution......
    Bridge mode is achieved by 2 easy steps:
    1) - Log into the GUI
    click the My Network Icon on top
    Click Network Connections on the left
    Click on the words "Broadband Connection (DSL)"
    Make the Protocol dropdown say "Bridge"
    Make the Bridge Mode dropdown say "Bridge"
    Save - the unit will reset
    2) Log back into the GUI
    Click the My Network icon on top
    Click Network Connections on the left
    Click the on the word "LAN"
    Remove the top checkmark (you want to not enable the DHCP Server)
    Make sure the modems ip address is not going to be the same of your router
    Save
    Exit the GUI
    I made my modem 192.168.10.1, and my routers lan network is 192.168.0.1
    The 6100F is bridged. The internet light will stay out. Whatever the next device on the network is will need to do the PPPoE connection (with your ISP username and password) ex your router
    Myk

  • My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

    My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

    Follow the steps here. If nothing works, make an appointment at an Apple store or with whoever handles iPhone warranty where you live:
    http://support.apple.com/kb/TS1398

  • Apple tv mirroring doesn't work with ipad 2

    Apple tv mirroring doesn't work with ipad 2 and last update achieved

    you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

  • I have upgraded Acrobat Standard from version 8 through time until I am currently using version X, which doesn't work with Office 2013.  Can I upgrade to version Standard XI?

    Over the years I have upgraded Acrobat Standard from version 8 to currently working with version X.
    However, since getting a new laptop it doesn't work with Office 2013.
    Can I upgrade to Standard XI?

    Upgrade pricing now only applies to version 9 and X. So if you have a retail serial number for X, you should be able to upgrade. (Or consider subscription).

  • IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    At least to 10.6.8. You must do this to upgrade to Mountain Lion.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • AT-AO-10 doesn´t work with Windows 2000

    I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
    In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
    If the board is unplugged, error messages are the same.

    Hello;
    You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
    Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
    Regards
    Filipe A.
    Applications Engineer
    National Instruments

  • MPEG-2 Plugin doesn't work with SVCD ?

    Hi,
    I just purchased the rather expensive MPEG-2 plugin for Quicktime, only to find that it doesn't work with a .mpg I have on a SVCD. Apple support in Australia have bent over backwards to help without success - apparently it just "doesn't work". Customer relations in Australia have, by comparison, been extremely poor in addressing my complaint (ie, they won't provide a refund).
    I guess this is a warning to anyone who assumes the premium priced MPEG-2 plug-in for Quicktime will play what just about every other cheap downloadable MPEG2 player will.
    Paul

    There should be no quality loss as longs as the ripped CD is in good shape...
    (XS)VCD disks have very little error correction -- that's why you can put as much as ~797.9 MB of MPEG2 data on a "80 minute CD" in (XS)VCD format, while you can put only ~703.1 MB if you treat the same CD as a regular data-CD. ...and audio-CDs use no error correction at all so you can put ~807.5 MB on an that CD if you treat it as an audio-CD!
    So a data-CD holds less stuff but it is more reliable to get a bit-for-bit copy back from it.
    So: if the (XS)VCD or audio-CD has a small defect and you rip it, then the application must sometimes guess and make the ripped data out of thin air. Luckily the human ear/eye don't usually notice any quality loss, though.
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#calculations

  • My VPN doesn't work ever since I upgraded to iOS7

    My VPN doesn't work ever since I upgraded to iOS7, pls help?

    It's been a problem with ios 7, for now try using your apple id for it. Apple is supposed to be putting out a fix for it soon.

  • I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    Mike wrote:
    > Could someone tell me why this prototype-based lightbox
    seems to work on one
    > of my sites but not on the other?
    >
    > I literally took the exact same .js & css files,
    copied them over from one
    > site to the other, but it's only partially working on
    the new site.
    >
    > Works :
    >
    http://www.roxanacampagiorni.com/
    >
    > Doesn't work :
    >
    http://www.vilverset.com/sample.html
    >
    > Been troubleshooting this one for days, and I'm stumped.
    Script wants
    > nothing to do with lightboxing HTML files on the new
    site. Only straight
    > JPGs. But it was written to work with them, and it
    *does* work with them
    > just fine on the *other* site.
    >
    > Where is the anomaly between the two sites that's
    causing it to break in
    > sample.html?
    >
    >
    Not sure if this is relevant but on the page that works you
    have these
    js files linked - 4.....
    <script type="text/javascript"
    src="/scripts/jscripts.js"></script>
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    and on the page that doesn't - 3......
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    HTT
    chin chin
    Sinclair

  • Slide advancer (Kensington) doesn't work with powerpoint

    slide advancer (Kensington) doesn't work with powerpoint

    Hi, Todd.
    I don't use an AirClick, but a quick check over at Griffin Technologies indicates one must be using PowerPoint 2004 to control presentations with the AirClick and AirClick USB products.
    If you're using PowerPoint 2004, then I suggest you take up the matter with Griffin Technology's Support. They also appear to have published some updated software for AirClick.
    Another place you may want to search or post is the the PowerPoint group you can find on the Microsoft Mac Support - Newsgroups page. These are Google Groups with active participation from MS PowerPoint users, including a variety of expert users.
    I don't mean to send you somewhere else, but I've found numerous answers there for folks with questions related to MS products. Accordingly, it has often proved to be the first, best place to look for answers to questions such as you are asking.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

    Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it.  Do I need a new code or am I missing something?  Same goes for my Photoshop cs.

    you need your serial number.
    if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

Maybe you are looking for