Incomplete Recovery and Read Only

Ok, I seem to be missing something. I've performed an incoplete recovery to a specified SCN. Everything is great if I open the database with resetlogs. But, the documentation (see quote below) says I can open the database as read only to check the recovery before I do the "resetlogs". However, I get the error (RMAN-01009) when I try to open the database read only. Can anyone explain?
Oracle Database Concepts (B14220-02) - 15 Backup and Recovery:
Before using the OPEN RESETLOGS command to open the database in read/write mode after an incomplete recovery, it is a good idea to first open the database in read-only mode, and inspect the data to make sure that the database was recovered to the correct point. If the recovery was done to the wrong point, then it is easier to re-run the recovery if no OPEN RESETLOGS has been done. If you open the database read-only and discover that not enough recovery was done, then just run the recovery again to the desired time. If you discover that too much recovery was done, then you must restore the database again and re-run the recovery.
The script I ran:
run
set until restore point r1;
restore database;
recover database;
}

To generate the exception RMAN-01009 it appears you are trying to open the database using RMAN ... try it with SQL*Plus ... and if you have a problem post the full error message not just your impression of it along with the corresponding section of the alert log and full version number.

Similar Messages

Crashes and read-only file systems

Notice: I apolgize for the long post, I've tried to be as thorough as possible. I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation. Any help, even as simple as, "have you checked out XYZ log, it's hidden here", would be greatly appreciated. Thanks
I'm not sure what exactly caused the issues below, but they did start to happen within a day of running pacman -Syu. I hadn't run that since I first installed Arch on December 2nd of this year.
Setup:
Thinkpad 2436CTO
UEFI/GPT
SSD drive
Partitions: UEFISYS, Boot, LVM
The LVM is encrypted and is broken up as: /root, /var, /usr, /tmp, /home
All LVM file systems are EXT4 (used to have /var and /tmp as ReiserFS)
The first sign that something was wrong was gnome freezing. Gnome would then crash and I'd get booted back to the shell with all filesystems mounted as read-only. I started having the same issues as this OP:
https://bbs.archlinux.org/viewtopic.php?id=150704
At the time, I had /var and /tmp as ReiserFS, and would also get reiserfs_read_locked_inode errors.
When shutting down (even during non-crashed sessions) I would notice this during shutdown:
Failed unmounting /var
Failed unmounting /usr
Followed by a ton of these:
device-mapper: remove ioctl on <my LVM group> failed: Device or resource busy
Nother of these errors had ever appeared before.
After hours of looking for solutions (and not finding any that worked) I was convinced (without any proof) that my Reiser file systems were corrupt and so I reformatted my entire SSD and started anew - not the Arch way, I know I set all logical volumes as EXT4.
After started anew, I noticed
device-mapper: remove ioctl on LVM_SysGroup failed: Device or resource busy
was still showing up, even with just a stock Arch setup (maybe even when powering off via Arch install ISO, don't remember). After a lot of searching, I found that most people judged it a harmless error, so I ignored it and continued setting up Arch.
I set up Gnome and a basic LAMP server, and everything seemed to work for a couple of hours. Soon after, I got the same old issues back. The System-journald issue came back and per the workaround on https://bbs.archlinux.org/viewtopic.php?id=150704 and a couple other places, I rotated the journals and stopped journald from saving to storage. That seemed to stop THOSE errors from at least overwhelming the shell, but I would still get screen freezes, crashes, and read-only file systems.
I had to force the laptop to power off, since poweroff/reboot/halt commands weren't working (would get errors regarding the filesystems mounted as read-only).
I utilized all disk checking functions possible. From running the tests (SMART test included) that came as part of my laptop's BIOS to full blown fsck. All tests showed the drive was working fine, and Fsck would show everything was either clean, or
Clearing orphaned inode ## (uid=89, gid=89, mode=0100600, size=###
Free blocks count wrong (###, counted=###)
Which I would opt to fix. Nothing serious, though.
I could safely boot back into Arch and use the system fine until the system decides to freeze/crash and do the above all over again.
The sure way of recreating this for me is to run a cron job on a local site I'm developing. After a brief screen freeze (mouse still moveable but everything is otherwise unreponsive) I'll systemctl status mysqld.service and notice that mysqld went down.
It seems that it's at this point my file systems are mounted as read only, as trying to do virtually anything results in:
unable to open /var/db/sudo/...: Read-only file system
After some time, X/Gnome crashes and I get sent back to shell with
ERROR: file_stream_metrics.cc(37)
RecordFileError() err = 30 source = 1 record = 0
Server terminated successfully (0)
Closing log file.or_delegate.h(30)] sqlite erro1, errno 0: SQL logic error or missing database[1157:1179
rm: cannot remove '/tmp/serverauth.teuroEBhtl': Read-only file system
Before all this happened, I was using Arch just fine for a few weeks. I wiped the drives and started anew, and this still happens with just the minimal number of packages installed.
I've searched for solutions to each individual problem, but come across a hack that doesn't solve anything (like turning off storing logs for journal), or the solution doesn't apply to my case.
At this point, I'm so overwhelmed I'm not even sure where exactly to pick up figuring this issue out.
Thanks in advance for any help

Did this occur when you booted from the live/install media?
What is your current set up? That is, partitions, filesystems etc. I take it you have not yet reinstalled X but are in the default CLI following installation?
If turning off log storage didn't help, reenable it so that you may at least stand a chance of finding something useful.
What services, if any, are you running? What non-default daemons etc.?
Does it happen if you keep the machine off line?
Have you done pacman -Syu since installation and dealt with any *.pacnew files?
Last edited by cfr (2012-12-26 22:17:57)

How to use same view as editable and read only in ADF

Hi,
how to use same view as editable and read only in ADF ?? How can we achieve this in TF's ???
-mrudul

Hi,
Steven Davelaar wrote a presentation about this "Building Highly Reusable Taskflows"
Starting slide 14 is where your use case comes into play
Frank

Missing "illustrations" tab and read-only information

After a Windows XP Home repair, no illustration tab and read-only information by new music downloads. Have most recent itunes. Can someone help me...please?

Thanks Gilad, In that case, is there then a way (via a script) that if I leave field 2 as not readonly, so the cursor moves into this field on tab out of field one, that I can reject any input from the user, if field one does not contain any data ? I thought this might be a solution. I have the script with the If Else statement, that sets the value of field 2 to "", if the value of field 1 is also "", but what is the else statement required to accept the value, if the content of field 1 is not "" ?.
The script preoduces an error, if field 1 is blank, and I try to enter data into field 2 and then tab out of field.

Possible to make an item editable for certain users and read only for other

Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

Can't mount USB disk with the atribute of fix and read-only

Hello All,
I have a usb disk which is set as fix(non-removalbe) and read-only. I tried to connect it to Macbook version 10.4.11 ,but it failed to mount the disk. However, connecting to 10.5.X and windows XP work fine. I am wondering is it a bug specifically in 10.4.11 only ? Could I get any patch for this problem ?
Thanks,
Ying

HI Ying and Welcome to Apple Discussions ...
Try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
Carolyn

Editable and Read-Only Date Picker have different display formats -- Bug?

Hi all,
This is a follow on to a previous posting about getting a Date Picker field to display read-only (Date Picker and Read-Only Condition works on LAST state of element
Now past that hurdle, I have noticed something about the date picker field when it is displays read-only. Namely, the date format is not the format selected, nor does the read-only date format comply with the format mask in the source section.
I've modified my small test app to work as intended in order to demonstrate this feature. I also opened it up so everyone can see it <blush>. You can find it here: http://htmldb.oracle.com/pls/otn/f?p=42513: Please navigate to the Update Project tab.
When a project in Program One through Four is selected (which has a Spec Committed date), the date is displayed DD-MON-YY format. When a project the other Programs (which do not have Spec Committed dates at the time of this writing) are selected, and a date value selected with the date picker, the date is displayed in the anticipated DD-MON-YYYY format.
Anyone else notice this, or have I just missed something obvious?
Thanks,
Petie

I'm not sure why this happens but to work around it I added this before header process code to the page:
execute immediate 'alter session set nls_date_format = ''DD-MON-YYYY''';
Scott

Stuck on ISW installation step - Config of other master and Read only

I'm trying to figure out how to complete one of the last steps for my isw install. Stuck on this step:
Configure the Sun Directory Server plugin on every other master and read-only replica that manage users under o=myorganization.

2011 Macs do not have a PPC processor. They have an Intel processor. Apple menu -> System Preferences -> Energy Saver allows you to modify the sleep settings.
Is your data backed up?

Data warehouse backups and read only tablespaces

Hi all,
I am working on a data warehouse database with following specs:
Version: Oracle 10.2.0.3 Enterprise
OS: Solaris
App: Data warehouse
We use RMAN to take 'level 0' & 'level 1' backups. We have block change tracking enabled and RMAN backups up data files and archive logs straight to tape.
I am exploring ways of reducing the 'level 0' backups and was specifically focussing on using read-only tablespaces for this purpose.
I have often seen it mentioned that a best practice in D/Ws is to store the old static partitions of fact tables in read only tablespaces so as to reduce the backup size.
In case you have already implemented such a scheme, I would like to know how you have implemented it.
I am thinking of the following mechanism:
-- Start using backups at tablespace level rather than 'level 0' at database level.
-- Record the latest SCNs of all datafiles prior to back up.
-- If the latest SCN has not changed since last backup and the tablespace is in read only mode then
-- Check if a backup copy of the tablespace has been done within the recovery window and is accessible.
-- If the copy exists then don't backup that tablespace, else backup the tablespace.
-- If the tablespace is read/write then back it up.
I haven't delved into the low level details, but this seems to be lot of work. So just wanted to know from you if there's any ready made feature which makes all this easier.
Many thanks in advance.

Thank you so much for your help.
Backup optimization was indeed the thing I was looking for. To be honest I had done a bit of RTFM, but I didn't check the advanced user guide.
Although my specific question has been answered, it would be interesting to know what other things other people are implementing to reduce backups etc.
I am also thinking of following options:
-- Turn on index monitoring to get rid of unused indexes.
-- Stop the backups of 'index' tablespaces.
-- Archive off old data.
Any other ideas for reducing DW backup size?
Many thanks.

Issue regarding open word file and read only mode using c# & MS-word interop

i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
            object fileName = "";
            string filePath = "";
            string strSaveasPath = "";
            DialogResult result = openFileDialog1.ShowDialog();
            if (result == DialogResult.OK)
                fileName = openFileDialog1.FileName;
                //strSaveasPath = Path.GetDirectoryName(path.ToString());
            //fileName = "Z:\\C0000000003.doc";
            List<string> _list = new List<string>();
            _list.Add("tridip");
            _list.Add("arijit");
            //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
            object textToFind = "test";
            object readOnly = false;
            Word.Application word = new Word.Application();
            Word.Document doc = new Word.Document();
            object missing = Type.Missing;
            try
                doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing);
                doc.Activate();
                object matchPhrase = false;
                object matchCase = false;
                object matchPrefix = false;
                object matchSuffix = false;
                object matchWholeWord = false;
                object matchWildcards = false;
                object matchSoundsLike = false;
                object matchAllWordForms = false;
                object matchByte = false;
                object ignoreSpace = false;
                object ignorePunct = false;
                object highlightedColor = Word.WdColor.wdColorGreen;
                object textColor = Word.WdColor.wdColorLightOrange;
                object missingp = false;
                Word.Range range = doc.Range();
                foreach (string line in _list)
                    textToFind = line;
                    bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
                System.Diagnostics.Process.Start(fileName.ToString());
            catch (Exception ex)
                Console.WriteLine("Error : " + ex.Message);
                //Console.ReadKey(true);
            finally
                //doc.Close(missing, missing, missing);
                if(doc!=null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                if (word != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                word = null;
                doc = null;
                GC.Collect();
                GC.WaitForPendingFinalizers();

I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

Two questions: Event on a Date Picker and Read Only on a full page?

Hello,
I make use of this very informative board to develop an application but i have been unable to find info on these two topics. Sorry if it has been already discussed extensively.
Using HTMLDB 2.2 for now.
=>First question:
I have a date picker item with an event
onChange="resaStatusChange();"
in the HTML Form Element Attribute field.
The event is triggerring if i put a new data in the field but does not trigger if i use the picker.
Is it a standart behaviour? Is there a way to trigger the event when new data is provided through the date picker?
=> Second question:
One page in my application has to be used either to only display information or as a mixed displaying/entering data sheet.
When the context is appropriate to use the page as a simple display (testing both global authorization and data to be displayed), is there a way to put a read only attribute on the full page instead of putting the read only conditions through each and every item of the page?
Sorry if the questions are not clear and apologize for what should be newbie questions.
Any link or info will be appreciated.
Regards,
Daniel Gureghian

Hi Daniel,
I'm not sure about your first question, but I can hopefully give you a helpfull answer for your second one.
I'm handling it this way:
var elInput = document.getElementsByTagName('input');
var elTextArea = document.getElementsByTagName('textarea');
var elSelect = document.getElementsByTagName('select');
for (i = 0; i < elInput.length; i++)
setReadOnly(elInput, true);
for (i = 0; i < elTextArea.length; i++)
setReadOnly(elTextArea[i], true);
for (i = 0; i < elSelect.length; i++)
setReadOnly(elSelect[i], true);
function setReadOnly(pThis, pRead)
     if (pThis && pRead)
          pThis.disabled = pRead;
          pThis.style.emptyCells = "show";
          pThis.style.color = "black";
          pThis.style.backgroundColor = "#DDDDDD";
     else if (pThis && !pRead)
          pThis.disabled = pRead;
          pThis.style.emptyCells = "show";
          pThis.style.color = "black";
          pThis.style.backgroundColor = "#FFFFFF";
I never used it on a whole page, only for regions. So maybe you have to make some changes.
chrissy

Problems with Conditional Display and Read Only

Hi Everybody,
I have a form to Add/ Modify Table Info.
I have column which stores numeric value (like no. of purchases, no.of returns etc.,) and I have a text field with this Database column as Source.
In some cases the value is a foreign key (Id of the Owner, Buyer etc.,) to another table. In such cases, I want to display a select list containing people information. Is that possible?
This is what I did to achieve that
I added a select list with info from second Table. Made both the text field and the select list to conditional display and conditional read only.
My understanding is that When an item is made read only it should not be saved to the Database.
But while Updating I am getting the following Error
ORA-06550: line 1, column 130: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored.
Any can anybody help me out on this?
Thanks
Nimmi

My understanding is that When an item is made read only it should not be saved to the Database
No, all page items with a Source Type of "Database Column" will be used by the Automatic DML process to insert/update the database. Form inputs with the "disabled" HTML attribute set are not POSTed to the server.
Try to create 2 items, one Select List and other Text Field but setup their conditions such that only one of them is rendered on the page at any given time. That might work.

External editors and read-only folders

I'm trying to use LR4 to work on NEF images I'd imported from a read-only directory. While regular LR4 editing works, using an external editor doesn't because LR4 insists on trying to write a file into that read-only directory. Is there a way to persuade LR4 to put the files it uses to communicate with external editors somewhere else? I intentionally want to keep my NEF directories read-only because they're synced with other programs (which would get upset by LR4 sneaking extra files in there) and because I don't want to accidentally alter anything there.

Not for secondary editors.
Only the primary Photoshop CSx can open a file wihtout creating it first. Then tiy ba use Save As from Photoshop to choose another location.

JFileChooser and Read Only Folders in XP

The following question concerns a Java application, not a applet or web service.
If you are browsing a folder with JFileChooser the button to create a new folder is disabled if the parent folder is read-only. Under XP folders often show up as read only and cannot be easily changed by the user. Even if Windows reports that the parent folder is read only, it does not block the creation of sub-folders in it. I'd like to always make the create folder button active regardless of whether the parent folder is read only or not; that more truely reflects the folder creation permissions anyway and mimics the behaviour of an MFC file browser. How would I do this?
I've even tried to add a listener to the file chooser so that as the user browses to a new directory I automatically change the write permissions of folder, but short of a system command, there's no way to change the write permissions from JAVA so I don't consider this a neat solution.
I'm surprised that I haven't found similar complaints on the net. If you use a MFC file browser the create folder button is active, but a Java file chooser has it disabled for the same folder.
Please help.

What would you say to a new FileChooser? I love java but I'm no fan of Sun's choosers. (See www.MartinRinehart.com, Examples, ColorChooser.)
Email me if you're interested in doing one.

Physical disk for OS and read only filesystem after live migration

I am running OVM 3.1.1 connected to an EMC storage array. I have a situation where physical disks are being used for OS and binary filesystems (i.e. /u01, etc..) rather than virtual disks inside a repository. When a VM is migrated from one host to another, I sometimes get a message stating the size of the disk changed and shortly afterwards the filesystem is changed to read only and I have to reboot to fix the problem. Is this an unsupported configuration or do I have potential problems with my LUN mapping? Has anyone seen this problem before?

I am running OVM 3.1.1 connected to an EMC storage array. I have a situation where physical disks are being used for OS and binary filesystems (i.e. /u01, etc..) rather than virtual disks inside a repository. When a VM is migrated from one host to another, I sometimes get a message stating the size of the disk changed and shortly afterwards the filesystem is changed to read only and I have to reboot to fix the problem. Is this an unsupported configuration or do I have potential problems with my LUN mapping? Has anyone seen this problem before?

Incomplete Recovery and Read Only

Similar Messages

Maybe you are looking for