Inconsistancies in available stock in z custom table and LQUA

The users are using transaction code LT01 for assigning cost center for a particular quantity hence updating VERME feild in LQUA table. beside this we have another custom program that uses for stock movement and whenever the movement takes place through handheld devices at warehouse its update the stock quantity in MENGE feild of a Z custom table. Issue is that when the transaction is done in LT01 the quantity is updated in VERME-LQUA but not in MENGE-ZTABLE. Kindly suggest any solution.
Regards,
Faizan

Hello Muhammed.
Do a where used list on that ztable(you will get all the programs where it is used) and check where it is being updated and try to set break-point at that place and run lt01 transaction.
Thanks

Similar Messages

  • HRFORMS - Custom table and Infotype Fields

    Hi,
    I am trying to add Custom table and Infotype Fields to the HRFORMS but i couldn not...
    1) I have created Custom MetaNet in HRFORMS_METADATA
    2) Created Meta Dimension and MetaStar for thr new fields
    3) When I use these custom metenet to crate Info stars in HRFORMS transaction, I am getting erros for DDIC activation.
    Does anyone has any idea or am i missing any steps?
    ...Naddy

    No issues when did it again.

  • I have a custom table and i have to update the table every 4 to 5 min ,

    Hi All,
    I have custom table and i have to update every 4 to 5min through custom program , could pls suggest the various ways to do that.
    Regards
    subba

    Hi Subbu,
    Schedule the program as a background job in transaction SM36 ---> Define Background Job
    In SM36 you can find push button Start condition in that u have Date/Time Push button click on it. Specify the date and time when you want to schedule the program to run.
    Now below  you can find a push button Period values click on it here you get another pop up Period values.
    As you want to schedule for every 3 to 4 minutes click on Other period push button.
    Here you get another pop up Explicit period values  now specify the time minutes field as per your requirment and click on OK.
    Best regards,
    raam

  • Diff between custom table and cutomized table

    hi,
    can any one let me know the terms custom table and customized table is same or is there any difference in between these two.
    in case of any difference please let me know.
    regards

    hi,
    Customizing table is
    a very SPECIAL MASTER TABLE
    where VERY IMPORTANT RECORDS
    are maintained.
    2. Such records, affect calculations / flow / logic etc .
    3. Important thing about customizing table,
    is that it will ask for REQUEST NUMBER,
    whenever we try to add / modify any record in it.

  • Creating Customized Table and Modify Table Maintenance Screen

    Hi,
    I have already created customized table and generate the table maintenance screen, however i encountered 1 problem which is i cannot add new PAI and PBO module in the flow logic. Every time i wanna add new module, i will be getting error message saying that my user currently editing the screen. Any suggestion ?
    Thanks.
    Jon

    Hi <b>Jonathan</b>,
    Please close all the windows and relogin
    For making PAI and PBO modules, Please activate all the Table and its maintainence view.
    Now first make emptu file with <main filename>_PAI and <main filename>_PBO save and activate them.
    Now put the logic in them and then activate now call these in the main prog.. it should work...
    While activation all the sub program modules should be activated already... i suggest select all the prog and sub progs and activate them all at once...so the system automatically takes care of inner activations first...
    If u have some more quereies... please feel free to contact me...
    Regards,,
    <b>Abhishek</b>

  • Generic datasource based on custom table and hierarchy table

    Hi Gurus,
    I have a doubt regarding generic datasource.
    my requirement: to create a datasource with 10 fields. (7 fields from custom table and 3 fields whose values can be derived from a hierarchy table).
    I have a custom table. In this table one field refers to a hierarchy table. Using this hierarchy table, we can derive values to 3 new fields.
    My question is, If i create a generic datasource based on the custom table, how can i include the extra 3 fields which gets values from the hierarchy table.
    Where can i write the logic to extract the values for those 3 fields from the hierarchy table.
    Thanks
    Regards,
    Aarthi
    [email protected]

    Hi Aarthi,
    Sample code in the user exit woul be like this:
    DATA:  i_biw_tab LIKE BIW_MARA_S.
    WHEN '<data source>'.
        LOOP AT i_t_data INTO i_biw_tab.
          SELECT fields
            INTO <table from which you want the value
            FROM <table>
           WHERE <your condition>.
          IF sy-subrc = 0.
                 MODIFY i_t_data FROM i_biw_tab.
          ENDIF.
        ENDLOOP.
    Bye
    Dinesh

  • Available Stock status (MM) - which table should I take and what are the fields ??

    Kindly Suggest Me !!!
    Report that outputs stock, grouped by Material type and Plant. The output shows Material no, Storage location, unit of measure and description in addition to group table using ALV.
    Thanks in adv.
    Bunty ( New to SAP )

    Hello Bunty
    When you run the report put in current month in date fields, then when you are in the report you can add the different fields you need.
    At the top there is a button called 'Switch Drilldown', this enables you to view by Material Type etc. Fourth from the right is another button that looks like the standard variant button, here you can add or remove different figures for valuing the stock.
    Don't forget that this report views periods so you can use average stock etc by changing the month.  Also make sure that any stock reports you are using reconcile with each other.
    Michael

  • How to track changes in a custom table and based on that run an interface

    I have an interface. The pre-condition for running the interface is "Run the interface only if there is new entry added to the table( a custom table). Now I have created a change document object using tcode SCDO for the custom table. Now how do i proceed further. Please tell me the steps which i need to follow to check if the custom table has been changed and also the entries changed  before running the interface.

    Hello,
    SAP has provided many changes tracking related programs for Sales order, Vendor changes etc.
    They all use the standard function Module
      call function 'CHANGEDOCUMENT_READ_HEADERS'
    call function 'CHANGEDOCUMENT_READ_POSITIONS'
    so with these you can get the changed records
    Let me know if this helps you
    Thanks and Regards
    Pushkar Joshi

  • How to upload images in to custom table and display them in normal ABAP report?

    Hi Experts,
    Can anyone suggest me ,how to upload images into customised table and display thoes images in normal abap report.
    Thanks in Advance,
    Rgds,
    Anusha

    Hi Experts,
    Can anyone suggest me ,how to upload images into customised table and display thoes images in normal abap report.
    Thanks in Advance,
    Rgds,
    Anusha

  • How to create the custom table?

    Hi, how to create the custom table and how to integrate the table with defferent R/3?
    my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
    Tks
    DPk

    how to create the custom table
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach.
    Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
    3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
    how to integrate the table with defferent R/3
    Transport the Table to the another server/client/qas/prd
    Kanagaraja L

  • Custom Table Currency field with 5 decimals

    Hello,
    I have created a custom table and it has a field for 'US Plan Cost'. The users wanted it with 5 Decimals. I have created a custom domain and custom data element of DEC Type with 5 Decimals.
    Domain: ZCOST: Data Type: DEC, No. of Characters: 11, Decimal Places: 5.
    However When I am trying to create entries in the table though, it's giving me error: Input must be in the format _____,_____,_____,_____~._____
    The entry that I am creating is: 1.23450.
    I dont know what went wrong? Can anybody please help me?
    Thanks Much.

    Are you doing this with SM30?  or from a program?  If a program, be sure your data value is precisely '1.23450'. It sounds like you're inputting something else...
    Or, post code?

  • Custom Transaction for maintence of custom table

    hi friends,
                i have created a custom table. and for it i need to have a custom maintenence transactions.the custom transaction should consits of insert, copy a row and upload....
    but i dont think we have an upload feature in SM30,
    now my doubt is how can I solve  this,,, by  any other method & dilaog program being my last priority.
    Please let me know if u guys get some idea
    Thanks  in advance
    Tina

    Hi
    U can use the fm GUI_UPLOAD to read and store the file in internla table, after transfer the data from internal table to database table. This is an example:
    PARAMETERS: P_FILE(120).
    DATA: FILENAME TYPE STRING.
    DATA: T_FILE LIKE TABLE OF <ZTABLE>.
    START-OF-SELECTION.
      FILENAME = P_FILE.
      CALL FUNCTION 'GUI_UPLOAD'
           EXPORTING
                FILENAME = FILENAME
           TABLES
                DATA_TAB = T_FILE.
      INSERT <ZTABLE> FROM T_FILE.
    You can use this program only if the file have the same structure of Z-TABLE, otherwise you have to elaborate the data of T_FILE before inserting in the database.
    Max

  • How to transport records of custom table in SAP BI?

    Hello,
    I creeated a custom table and entered some records there. Now I would like to transport it to production.
    When I select the records and press 'transport records' the system doesnt allow me to save it under transport request.
    The following error message pops up :
    This is customization request but you need workbench one.
    But I dont see any workbench requests in this window.
    Thanks

    Go to SE09,
    Select Create Request
    It will ask for selection for type of request.
    Select 'Workbench Request' and try with this request.
    Sankar Kumar

  • How to populate date & time when user enter data for custom table in sm30

    Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
      Req is
      i have custom table and using sm30 user can enter data.
    after saving date i want to update date & time in table
    Pls let me know where to write the code?
    Thanks in Advance

    You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
    FORM update_user_date_time.
      DATA: f_index LIKE sy-tabix.
      DATA: BEGIN OF l_total.
              INCLUDE STRUCTURE zztable.
      INCLUDE  STRUCTURE vimtbflags.
      DATA  END OF l_total.
      DATA: s_record TYPE zztable.
      LOOP AT total INTO l_total.
        IF l_total-vim_action = aendern OR
           l_total-vim_action = neuer_eintrag.
          MOVE-CORRESPONDING l_total TO s_record.
          s_record-zz_user = sy-uname.
          s_record-zz_date = sy-datum.
          s_record-zz_time = sy-uzeit.
          READ TABLE extract WITH KEY l_total.
          IF sy-subrc EQ 0.
            f_index = sy-tabix.
          ELSE.
            CLEAR f_index.
          ENDIF.
          MOVE-CORRESPONDING s_record TO l_total.
          MODIFY total FROM l_total.
          CHECK f_index GT 0.
          MODIFY extract INDEX f_index FROM l_total.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " UPDATE_USER_DATE_TIME
    Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

  • How to find all Custom tables (transp) that have a custom transaction code?

    My client has asked us to provide a list of all Z (custom) tables and the associated transaction codes for maintaining them.
    I know I can manually do this with a Z* search in se11 and then do a where used on each table to find out if a view (transaction code) exists for the table - BUT THIS WOULD TAKE HOURS IF NOT DAYS TO DO AND BE LIABLE FOR HUMAN ERROR.
    Does anyone know the way we could code a search for this information (ABAP) and know what tables to use?
    Thanks.
    Scott

    Hi
    You can search in table TSTCP for custom tables that have a maintainance view and a transaction associated, which is a call to SM30. To do this, just select the table with TCODE starting with 'Z' and PARAM starting with '/*SM30'.
    But you can also have some Z tables updated by an module pool program. This is more complex to find, because you don't know if you simply have the field used in the screen for some other use in a transaction, or if it is in that screen just to update the table. In this case, you need to analyze each screen.But I hope the first tip help you to solve your problem.

Maybe you are looking for

  • Color Shift from Quicktime Movie

    Ok, Here is my problem.  When I do a copy and paste into director from a Quicktime movie for the first and last frame of my movie the is a noticible color shift when the movie starts to play on my command and when the movie transitions from the last

  • Class, interface, or enum expected?

    Ok I keep getting that error. Here is my java file that it is in. package server.main.project12.skills; import java.io.*; import server.main.project12.*; public class fireMaking { public int xpgained = 1;//Change this and the fire xp will be times by

  • Oracle Collaboration Suite download disappear

    Hi, Where can I download the Oracle Collaboration Suite. Few weeks back I was able to see the download page, now they are nowhere to find. Thank you.

  • Error loading Inventory Service

    Just completed several installs of Zen for Desktops 6.5 SP2. No problems except for one server that will not load the Inventory service. Tried renaming the Zenworks folders and reinstalling, deleting the objects and reinstalling, etc... Found the fol

  • Como restauro mi ipod touch que esta en modo reparacion

    Hola no se si alguien pueda ayudarme no puedo reparar mi ipod touch por que esta en modo reparacion, le pongo restaurar pero van mas d 5 horas y no avanza que puedo hacer