How to transport records of custom table in SAP BI?

Hello,
I creeated a custom table and entered some records there. Now I would like to transport it to production.
When I select the records and press 'transport records' the system doesnt allow me to save it under transport request.
The following error message pops up :
This is customization request but you need workbench one.
But I dont see any workbench requests in this window.
Thanks

Go to SE09,
Select Create Request
It will ask for selection for type of request.
Select 'Workbench Request' and try with this request.
Sankar Kumar

Similar Messages

How can I update a customized table from a text document?

Hi,
I am one sample file. The file is an text document. From this .txt file how can I update a customized table in SAP.
How can I Update the fields in the Customized table.
Thanks & Regards,
NManohar.

use the Function module GUI_UPLOAD or WS_UPLOAD and give the path and the file name from where the data has to be uploaded. in table parameter give the iternal table
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      =
FILETYPE                      = 'ASC'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      =
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and finally use insert command to update the database table with the data

How can i create a custom table in to my banking services server

I am having product type and account type details for those things I need to create a table
Product Id.                 Account Type
DP_PYGO_P     21
DP_BASIC     25
DP_UNLIMIT     24
DP_ADVANTG     17
DP_SAV                     34
DP_TBILL                     54
DP_USDCHQ     19
DP_FREEDOM     52
For the above fields how can i create a custom table into banking services server

Transaction SE11, maybe? I don't really see the problem, unless you have never created a transparant table before...

How to change records in standard tables ?

how to change records in standard tables ?

HI,
If you are asking from program..Then you can use BDC or BAPI to update the records in teh standard tables..
OR
use the corresponding tcode to update the record
Thanks
Naren

How to update Records from Internal table to u2018Zu2019 table?

Hi Friends,
How to update Records from Internal table to u2018Zu2019 table.
I have records in Internal table , that records want to update on u2018Zmarau2019 Table.
( my internal table & u2018 Zu2019 table structures are same.)
Thanking you.
Regards,
Subash

Hi,
loop at internal table.
modify <Z- table > from values < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
endloop.
or
UPDATE <Z- table > from table < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
Prabhudas

How to make records to the table TRFCQIN

hi all,
anyone can tell me
how to make records to the table TRFCQIN
regards

Hi Wanna,
Write a module pool program to enter record into table TRFCQIN.
Take fields to which u want to make entries in module pool.
Use insert command to append data in table TRFCQIN.
Refer this code :
CASE OK_CODE_101.
WHEN 'SAV1'.
TRFCQIN-QNAME = 'XYZ'.
TRFCQIN-QCOUNT = "Screen field name at which user will enter value
INSERT TRFCQIN.
if sy-subrc <> 0.
message e007.
else.
clear TRFCQIN.
clear ok_code_101.
endif.
endcase.
Reward points if helpful.
Regards,
Heamnt

How do we secure a custom table?

Hi
How do we secure a custom table, custom program and a custom transaction code? What are the alternative ?
thank You

Hello Subash
Usually I define customer tables as "application data" table in the attributes. However. If you have very sensitive data in your customer table then you could set it as "customizing" table. In this case the same security measures that are valid for standard tables (e.g. no customizing allowed in production systems) will be valid for your table, too.
Regards
Uwe

How to Create Transport Request For custom table

Hello All,
I have and requirement to create transport request automatically when and record inserted in to the custom table.
Actually FI whe people create or delete some bank account from DEV client the transport request creates automatically and they transport that request to Quality and Production system to delete or create that account from all the systems. but when they delete the account all the informations related to that bank accounts get deleted from all the standered customize tables . to keep the track of that deleted account I have created one z table which is of type customize table. this table is filled automatically when any account get deleted from DEV system. now I want to pass that record to Quality and Production systems using transport request.
how can i create transport request when record get inserted into my ztable automatically.
Thanks in advance.
Vinod

Hello All,
This is a FAQ and has been answered many times before in the forum.
1. Maintain delivery class 'C' it will start asking for a TR: False. Delivery class has got nothing to do with the TR prompt. It determines how the data is to be transported. A delivery class 'C' will prompt for a customizing request, whereas a delivery 'A' will prompt for a workbench request.
2. For the system to automatically prompt for a TR you have to select the "Standard Recording Routine" in the table maintenance generator. This will prompt you for a TR every time you try to create / modify a record & save it to the DB.
Hope i am clear in my explanation.
If your table is filled automatically through some coding you have to add the entry to the TR programmatically. Check this link for details: [http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically|http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically]
BR,
Suhas
Edited by: Suhas Saha on Mar 31, 2010 11:22 AM

How to delete the records from custom table???

My requirement is,
I have a custom table, assume as ZABC, I have updated this by my custom program, This data having table can be extracted by BI etract program(Assume ZZZ). Here I am not writing any code for extracting data from table to BI extract program, That they will do by BI extract program. But I want to write the code for
<b>Cleanup of Z tabledelete records 30 days after the BI data extractor has run.</b>
How this is possible suggest me any method having for these???
Thanks Sanju

Hell Sanjana,
Ask your basis people to do the clean up after 30 days. If you want the clean up only to be done 30 days after BI extract has been done, then u need some sort of indicator to say that BI Extract has been done , like flag and date in a custom table which will be set as soon as extract is done. Then based on that info u need to delete a the records.
Regards

Transport of a Custom Table Entries

Hi Forum,
I need some information as to how do we transport changes made to a custom table. We have created new entries in the Table and we need to transport those entries to QA. System did not ask for a TR No while we were creating the entries. Is there a way we can achieve it?
Any Inout on this would be of great help. And Rewards gurranted.
Thanks and Regards,
- Prasenjit

Hi
Try to change the Delivery Class to C in se11, Delivery and Maintenance tab.
Other option:
go to SE10 and create request.
in that give,
Program ID : R3TR
Obj : TABU
Object name : you table name.
double click on the table name and give key filed values. If you want to transport entire table entries
give * .
Regards.
Manuel

How can I place a custom table over an image?

I have a graphic embedded in the Master Page at the start of every chapter like this.
I created a borderless Custom Table without the data that I want to place over the image so it looks like the text is typed on the notebook paper. I apparently can't add this to the Master Page, but I can't seem to figure out how to do this on the Body Page either. The table is the same as in my previous question but included here again for reference. While the borders are evident here, I will turn them off when I get this placed. The merged cells are for graphics that will change every Lesson. Appreciating this forum as always. Someday I hope I have enough knowledge to help other people here...
Thanks,
Laurie

Laurie,
You need to have a text frame over the area that you want your table to appear. On the Master Page, use the graphics tools to draw the text frame (Body not Background type) where you need it. Then on the Body pages insert the table. You may need to play with the positioning of the graphic on the Master Page and perhaps use the Format > Page Layout > Line Layout > Baseline Synchronization option as well as the Table Row Height properties to get things to properly align.

How to update records in a table based on user selection..

Hi all,
This time the above doubt is totally based on the logic of coding which I tried a lot but didn't get any solution. so atlast I come to sdn site.
please help..
The requirement is like that I have a table with 6 fields (1 primary key and other are nonkeys). If the user inputs some values in the fields on the screen, then a row will be added in the table. Upto this i have done well. but when the user want to change some value in the existing row of the table my program unable to do so. Because I couldn't get any logic to do that as there are 5 nonkey fields, so if any one field is modified then the respective row should be selected first based on the user selection and then it should be updated.
At this point I could not get any idea as it may take a lots of if conditions (I guess) to reach to that particular row.
Please help..
thanks ,
sekhar

Hi Sekhar,
I am afraid, the whole design of your program is wrong, let me explain
Let us say you have two rows(5 non key fields) that the user wants to update and the data in these five non key fields are identical and in your program you are getting a number(which is the key) using a number range object. So you will have two entries in the table for the same data.
And on the update page when the user enters the non key fields, how will the program know(or for that matter any one of us) which record to pick, if you have two identical books and if asked for a book wouldn't you ask which one among these two do you want?
Possible Solution: Identify a possible key maintaining the integrity of the data, that is a combination of the non key fields which will help you identify a unique row and make these fields as key fields in the table.
A more costly solution(if you do not want to change the non key field keys to key fields) would be to, adding a check(using select statement) to see if the non key fields combination already exists in the Z table before inserting a record into the table.
If yes, throw a message to the user and just update the values in the table, else insert the record.
Another solution would be to, use the non key fields to generate a key(using some logic) and using this instead of the number range object.
regards,
Chen

How to add record in Qualified table using MDM Java API

Hi experts,
I am trying to add a record into a Table.
but I am facing the problem in setFieldValue method.
//Getting Field-ID to pass in setFieldValue() method.
FieldId[] fields = new FieldId[6];
          fields[0] = repSchema.getFieldId("GTINs", "Description");
          fields[1] = repSchema.getFieldId("GTINs", "Unit_Descriptor");
          fields[2] = repSchema.getFieldId("GTINs", "GTIN");
          fields[3] = repSchema.getFieldId("GTINs", "Alternate_Item_Classifications");
          fields[4] = repSchema.getFieldId("GTINs", "Country_Of_Origin");
          fields[5] = repSchema.getFieldId("GTINs", "Bar_Coded");
Record rec = RecordFactory.createEmptyRecord(mainTableId);
rec.setFieldValue(fields, );
but I am not getting how to assign the value to these fields using MDMvalue Interface.
Can anyone provide me the code sample or Code flow so that I can do this.
Plz help me it'll be great help for me.
Thanks
Tarun
Edited by: Tarun Sharma on Feb 4, 2008 11:39 AM
==========================================================================================
Hi Gurus
I found the way to add the MDMValue in setFieldValue Method.
we can set like this:
setFieldValue(<fieldId object like fieldId[], <MdmValue like this> new StringValue("ABC"));
Now I am facing problem in adding value to lookup flat table.
According to the setFieldValue method we can assign the loookup like this:
setFieldValue(<fieldId[0]>, new LookpValue(<here we have to pass the recordID of lookup table>);
so I want to know how I can pass the recordId of lookup table here.
Please suggest.
Thanks
Tarun Sharma
Edited by: Tarun Sharma on Feb 4, 2008 3:15 PM
Edited by: Tarun Sharma on Feb 4, 2008 3:25 PM
Edited by: Tarun Sharma on Feb 8, 2008 6:58 PM

Hi Andrea,
I tried your suggestion but now i am getting Type Mismatch Error.
Please suggest me what I can do?
//TableId for Lookup[Flat].
TableId lookupTableId = repSchema.getTableId("Return_Goods_Policies");
FieldId[] ReturnGoodsPolicyTableIdFields = new FieldId[1];
ReturnGoodsPolicyTableIdFields[0] = repSchema.getFieldId("Return_Goods_Policies", "Name");
Record recLookup = RecordFactory.createEmptyRecord(lookupTableId);
try{
recLookup.setFieldValue(ReturnGoodsPolicyTableIdFields[0], new StringValue("New_Brand"));
}catch(Exception ex){
System.out.println(ex);
//Creating Record in Qualified Table - Request Details
CreateRecordCommand createLookupcommand = new CreateRecordCommand(simpleConnection);
createLookupcommand.setSession(session);
createLookupcommand.setRecord(recLookup);
createLookupcommand.execute();
//Getting the recordId of Lookup record.
RecordId lookupRecordId = createLookupcommand.getRecord().getId();
//Table Id for Qualified table.
TableId qualifiedTableId = repSchema.getTableId("Ext_Hardlines");
FieldId[] ExtHardlinesFields = new FieldId[3];
ExtHardlinesFields[0] = repSchema.getFieldId("Ext_Hardlines", "Name");//Text
ExtHardlinesFields[1] = repSchema.getFieldId("Ext_Hardlines", "Pieces_Per_Trade_item");//Integer
ExtHardlinesFields[2] = repSchema.getFieldId("Ext_Hardlines","Return_Goods_Policy");
Record recQualified = RecordFactory.createEmptyRecord(qualifiedTableId);
try{
recQualified.setFieldValue(ExtHardlinesFields[0], new StringValue("Qualified Value"));
recQualified.setFieldValue(ExtHardlinesFields[1], new StringValue("Qualified Description"));
recQualified.setFieldValue(ExtHardlinesFields[2], new LookupValue(lookupRecordId));
}catch(Exception ex){
System.out.println(ex);
//Creating Record in Qualified Table - Request Details
CreateRecordCommand createQualifiedCommand = new CreateRecordCommand(simpleConnection);
createQualifiedCommand.setSession(session);
createQualifiedCommand.setRecord(recQualified);
createQualifiedCommand.execute(); I am getting this Type match here, but i m not getting what mistake i did.
RecordId qualifiedRecordId = createQualifiedCommand.getRecord().getId();
//Adding to Main Table
TableId mainTableId = repSchema.getTableId("GTINs");
FieldId[] gtinsFields = new FieldId[1];
gtinsFields[0] = repSchema.getFieldId("GTINs","Ext_Hardlines");
Record recMain = RecordFactory.createEmptyRecord(mainTableId);
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue qualifiedLookupValue = new QualifiedLookupValue();
qualifiedLookupValue.createQualifiedLink(qualifiedRecordId);
try{
recMain.setFieldValue(gtinsFields[0], new QualifiedLookupValue(qualifiedLookupValue));
}catch(Exception ex){
System.out.println(ex);
CreateRecordCommand createCmd = new CreateRecordCommand(simpleConnection);
createCmd.setSession(session);
createCmd.setRecord(recMain);
createCmd.execute();
Could you help me out?
Thanks
Tarun

How to exclude records from one table that is contained in a second table

I am trying to create a Crystal report that excludes records from one Table that is contained in a second table using the != link option and it is not working. I've tried all of the different enforce options, and it is still not excluding those records. Does anyone have any suggestions of what I'm doing wrong or any other suggestions how I can obtain the results I need?
Thanks in advance!

Have you tried by Command ?
Thanks,
Gordon

How to insert record in child table with foreign key

Hi,
I am using Jdeveloper 11.1.2.0. I have two master table one child table.
How to insert and update a record in child table with foreign key ?
I have created VO based on three EO(one eo is updatable other two eo are references) by using joined query.
Thanks in Advance
Edited by: 890233 on Dec 24, 2011 10:40 PM

... And here is the example to insert using sequenceimpl by getting the primary key of the master record and insert master and detail together.
Re: Unable to insert a new row with a sequence generated column id
-Arun

How to transport records of custom table in SAP BI?

Similar Messages

Maybe you are looking for