Incorrect call-up of the extraction program---error while extraction

Hi All,
We are loading the data first time(Full update) in BW Production we are getting the below error.
Error message is as follows:
Incorrect call-up of the extraction program R3 8
Errors in source system RSM 340
Details of error are as follows:
Requests (messages): Everything OK
Extraction (messages): Errors occurred
Error occurred in the data selection
We request you help for correcting this error.
Regards
Deva

Hi ,
Here is little more info about error details we see in Status tab of monitor.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
regards
Dev

Similar Messages

Incorrect call-up of the extraction program

Hi,
I am trying to extract the data from R/3 into BW through a function module( function module based extraction).
I get the error message while trying to extract in RSA6 as
"Incorrect call-up of the extraction program".
Could you please let me know if its the problem in any settings or any other issue.
Thanks
Regds
Gautam

Hi Gautam,
If possible send the Code for your fm....and i think the error shld be name of the data source.
You need to mentioned the name of the data source in your code i_datasource.....
If this help please assign points.
Regards,
Pawan.

I cannot open photo's stored in my i photo library to edit in Photoshop Elements. Adobe comes up with the message program error. I use a Macbook Air.

I cannot open photo's stored in my i photo library to edit in Photoshop Elements. Adobe comes up with the message program error. I use a Macbook Air.

No, that is done deliberately, since letting other programs poke around in the iphoto library is the fastest known way to corrupt it and make it wither up and die, along with your photos. If you want to use PSE with iphoto you have two choices:
1. Set PSE as your external editor and send the photos from iphoto. Edit them, then save without changing the name or format and iphoto will remember your last saved edits + original, although you have to lose the edits to see the original again. You may need to set the editor prefs>saving files>on first save to save over existing to make this work.
2. Export the photos from iphoto, use file>open in PSE, make all the changes of any sort that you like, save the file, and import it to iphoto as a new file.

Maintain the general program errors

hi all,
i have problem while printing the customized layout for PO with message.
Sytem message 038 from work area SSFCOMPOSER does not exist.
Message 038 from work area SSFCOMPOSER was not defined.
You have to maintain this message in the system. If you have
authorization for Customizing, maintain the general program errors.
Otherwise, please inform your system administrator.
Is it possible to maintain using SE91. if not, how to free from this message.
Thanks in advance for ur valuable time.
Regards,
reji.

hi anji,
thanks for ur reply,
But it works fine in development client but not in test client both clients are in the same server, how this happens?
regards,
prabhu

Program error while executing query

Hi,
We are on 2004s front-end patch 700. I am able to create and change the queries but when I execute the query, I am getting short error message which says "Critical Program Error Occured, pls refer to the trace for further information".
I am not very sure where to look for this error. But when I executed the query in RSRT it is working fine.
I have also tried activating the trace but nothing is captured there too.
Can you please help..?
Thanks
Samay

Hello Samay,
I believe you are running the query in Excel.
You are in 700. I would advise to use the latest patch if possible ( > 904 ).
May be, that will solve your issue.
Otherwise, please attach the trace file details.
You can record a front-end trace as follows:
1.) Start BExAnalyzer
2.) Go To Global Settings
3.) Go to the trace tab
4.) Check "Record Trace"
5.) Close the dialog
6.) Close BExAnalyzer
7.) Reproduce the problem
After the "Critical Program Error" popup appears you find a file
BExAnalyzerTrace.txt in the %temp% folder.
Regards,
Sheik Bilal

Receiving the internal 500 error while testing java web service

HI,
Problem Summary:
Receiving the internal 500 error while testing java web service in integrated weblogic server.
my scenario is like,
retrieve the Payload from Dehydration tables.
We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
I had verified in my Jdeveloper,Proxy settings are available.
Error Payload:
I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
Regards,
Anuj

"The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

Hi Techys,
can you give me the suugestions for below error in sharepoint 2010.
Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
User having the contribute permission.
as a admin i can open the document without any error.
user wants to open the document via online and VPN connection.
while the user seeing the document info the below error is indicationg .
Offline Copy, Work book is readonly Mode.
The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
Many Thanks,
Madhu

Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
--Cheers

I rented to HD movies on Apple TV, biuth at the same time. I was able to watch one, butb the second says - error while laoding this content, try later - well I tried later numerous times and continuemto get same message. what is my next step??

I rented two HD movies on Apple TV, both at the same time. I was able to watch one, but the second says - "error while loading this content, try later" - well I tried later numerous times and continue to get the same message. What is my next step??

No, the film will be available for 30 days, but once you start watching it the clock will start running and it will expire after 24/48hrs (depending on location).
You said you rented on Apple TV, which has no accessible storage. When you choose to watch it starts to cache to the small flash drive, which is then flushed when you access another movie (or any other content). Everything is streamed so it will need to load each time. If you want to store any content you need to do so via computer.
Network issues can also contribute to seeing such an error. If on wifi, try ethernet. Make sure DNS is set to auto (settings - general - network). You can also see the status of your network by getting a report (istumbler, netstumbler or similar), to look for signal strength, noise, nearby networks.
Other services use adaptive streaming so they won't be much of an issue.

Iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?

iphone 4s(ios 7) hangs after i reject calls by pressing the on/off button while it is in the lock screen.I restart the phone every time when i reject calls..what can i do ?

I've same problem in iPhone 5c. I was using iPhone 4, problem appears after updating to ios7. I changed my phone to iPhone 5c, looks like it's a bug in ios7. But I think you might not turn on or off your internet connection frequently to reduce this problem. My friend has a same iPhone she never gets such problem like this cause she uses iPhone 5c with Tata Docomo (India) 2g with no internet connection. May be this would be the best solve that you should not turn on or of your internet connection so frequently...
Do any one have any better idea?

The Concurrent Program Error (Report)

Hi,
I am new to apps.
Here i have created the sample report,
the query is very simple
select
h.Segment1,
h.creation_date,
h.vendor_id,
h.currency_code,
s.vendor_name,
l.line_num,
l.item_id ,
l.item_description,
l.unit_meas_lookup_code,
l.quantity,
l.unit_price,
Nvl(l.quantity,0)* Nvl(l.unit_price ,0) total
from po_headers_all h,
     po_lines_all l,
     Ap_suppliers S
where h.PO_HEADER_ID = l.PO_HEADER_ID
and h.VENDOR_ID = s.VENDOR_ID
and h.org_id = fnd_profile.value('ORG_ID')
and H.Segment1 = :P_po_numberThe above query in report is call 'G-Segment1'. In which i add a formula column called CF_net_value,
The reason to add the formula column is that i need to format currency using fnd format_currency
so i add the following code in the formula column .
function CF_Net_valueFormula return Number is
begin
srw.reference(:Currency);
srw.reference(:total);
srw.user_exit('FND FORMAT_CURRENCY
               CODE=":Currency"
               DISPLAY_WIDTH="15"
               AMOUNT=":TOTAL"
               DISPLAY=":Cf_net_value"
Return(:cf_net_value);
end;In RTF template i am using the CF_net_value to display the Total (i think that will be formatted one).
After the report deployment and run the concurrent program i am receive the following error.
REP-1416: '': User exit 'G_Segment1'. .
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1416: '': User exit 'G_Segment1'. Please help me in this struggle.
Thanks & Regards,
Kanish

Please post the details of the application release, database version and OS along with the developer version you are using.
Please see if old threads help -- https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

No mapping at the fault address error while accessing the string variable

Hi
we have a application which runs fine on AIX and HP but is throwing error on SOLARIS.
the application runs well (and use of string variables are also working fine ) till it hits Zone.cpp file
where the string variable is not getting initialized and throws no mapping at the fault address
the code snippet is as follows
#include <string>
#include <vector>
const string ZONE_ATTR_TYPE_ZN("ZN");
const string ZONE_ATTR_TYPE_FC("FC");
const string ZONE_ATTR_TYPE_ST("ST");
void Zone::AddAttributeValueAndCountryCode(const string &attributeValue,
                                                  Int attribSeq,
                                                  const string &countryCode,
                                                  ZoneSearchLocMap& zoneSearchLocMap)
     string key = "";
     if ((_attributeType == ZONE_ATTR_TYPE_FC) ||
          (_attributeType == ZONE_ATTR_TYPE_CT))
          key = _attributeType+DELIM+attributeValue;
we are running it on
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-04 2008/04/16
compiled with these option
-g0 -xspace -KPIC -D_XPG5 -m32 -xarch=sparcvis -mt -DNCURSES -DEXC_HANDLING -DRW_NO_BOOL
and the created the execuatble with these option
-i -z rescan -g0 -xspace -mt -D_XPG5 -m32 -xarch=sparcvis -mt -DNCURSES -DEXC_HANDLING -DRW_NO_BOOL -lpthread -lsocket -lnsl -ldl -lposix4 -lCrun -lCstd -lc -lm -lnsl -lsocket
the dbx output
t@1 (l@1) program terminated by signal SEGV (no mapping at the fault address)
where -h
Current function is Zone::AddAttributeValueAndCountryCode
56 if ((_attributeType == ZONE_ATTR_TYPE_FC) ||
(dbx) where -h
current thread: t@1
=>[1] Zone::AddAttributeValueAndCountryCode(this = 0x194c088, attributeValue = CLASS, attribSeq = 1, countryCode = CLASS, zoneSearchLocMap = CLASS), line 56 in "Zone.cpp"
[2] ZoneLoader::Load(trans = CLASS, zoneList = CLASS, prZoneList = CLASS, zoneSearchLocMap = STRUCT, planningCompany = 0x1890f20), line 90 in "ZoneLoader.cpp"
[3] ZoneManager::ZoneManager(this = 0x1933e28, shipperId = 1000, consDBConnection = CLASS), line 24 in "ZoneManager.cpp"

I see you are compiling with -KPIC. Is the code going into a shared library?
Run "ldd" on all the C++ shared libraries you create, and on the main program. You should see a dependency on /usr/lib/libCrun.so.1 and /usr/lib/libCstd.so.1, and no dependency on any other libCrun or libCstd.
Do you have a particular reason for using -D_XPG5? Changing the Unix version presented by the system headers in /usr/include can sometimes create incompatibilities with the C++ headers and runtime libraries that are intended for the default Unix version.
Are all of the object files created with the same options, especially the -mt option?
If none of the above considerations raise any red flags, you might have run into a bug in the compiler or the C++ runtime libraries, or you might have a bug in your code that by accident does not show up in other environments.
There is no way to evaluate whether you have a compiler or runtime library bug without a test case that demonstrates the problem.
You might have heap or other data corruption in your program due to invalid pointer use, use of an uninitialized variable, reading or writing outside the bounds of an object, double deletion of an object, use of an object after it has been deleted. You might also have an MT programming error where a critical region is not properly guarded, or where a shared variable is not declared volatile.
By accident, data can be read or written incorrectly, or a data-race condition can exist, but without causing program failure. A program containing these errors can appear to run successfully on one platform and fail on another, or on the same platform under other conditions.
Running the program under dbx with Run-Time Checking enabled will show many of these errors.
The Thread Analyzer can find data race conditions.
If you think you have found a problem with the compiler or libraries, please file a bug report at
[http://bugs.sun.com]
with a test case that can be compiled and run to show the problem.

"Program Error" While trying to print in PSE 9

Download and installed updates to PSE 9.0, Now 9.03. While in PSE mode I can no longer print images to Epson Photo R2880 or HP J4680. I can print to both printers using HP Media Smart Photo application, but if I attempt to print from PS Elements I get the following "could not print (image title) because of program error". I have since uninstalled the upgrade to PSE 9.03, I have also done a system restore all to no avail. I still can't print while in PSE. Any experience with this? Any resolution ? Help !!!

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Program Error while printing

When I try to print a Report, it works very Well with our HP LaserJet 2100, butr as soon as I try to print the Report on The HPC LaserJet 4550N, I have a Program Error ...
" PROGRAM ERROR :
RWBLD60.exe has generated errors and will be closed by Windows. You will need to restart the program.
An error log is being created. "
I need you help urgently ..
And do you know where is the error log created ?
Tx in advance,
Xavier.
null

hello,
there are some troubles with these printers. please contact oracle support services to get more information about that, or search oracle metalink for bug descriptions.
regards,
the oracle reports team

Getting a program error while Photoshop CS3 is running.

I am running Photoshop Version 10.0.1 on a Mac Pro desktop running OS X Version 10.5.8. It is usually running as I normally do not quit the application. When I bring the Mac out of screen saver mode I have been getting notifications that it cannot perform a certain request because of a program error. I do not have any file open in Photoshop. How do I get the messages to stop?

Yeah, it's a MacOS bug in the screensaver code. Apple thinks they fixed the bug in MacOS 10.6, and I believe we worked around it in Photoshop CS4. In CS3 and 10.5.x, there's not much you can do.

Need help with solving the (basic) programming error

I'm reaaaaaaaaaally new to Java and programming in general. I've been glancing through my older brother's old stuff (he's back at Uni!) and I've taken an interest.
Anyways, so I'm trying to finish this really simple program cause I wanna wow some friends ("wow" = "haha we've done this before a gazillion times") but I can't seem to solve this "incompatible lines" bug in the code, specifically line 24. I've been looking at it for exactly 4 hours!! Programming in Java 1.6.
Thanks for the help!! :)
import java.util.*;
import java.util.Scanner;
public class LuigisPizzaProgram {
     public static void main(String args[]) {
     System.out.println("Luigi's Pizza");
     System.out.println("-------------------------------------------");
     System.out.println(" a(SML) b(MED) c(LRG)");
     System.out.println("1. Cheese 5.00 7.50 10.00");
     System.out.println("2. Pepperoni 5.75 8.63 11.50");
     System.out.println("3. Combination 6.50 9.75 13.00");
     System.out.println("4. Vegetarian 7.25 10.88 14.50");
     System.out.println("5. Meat Lovers 8.00 12.00 16.00");
     System.out.println(" ");
     System.out.println("What kind of pizza do you want?");
     int kind = new Scanner(System.in).nextInt();
     System.out.println(kind);
     System.out.println("What size of pizza do you want?");
     char size = new Scanner(System.in).nextLine();
     System.out.println(size);
     }

Having said that, it is nontraditional to use Scanner like you are using it. There is no way to reuse it in order to get more input. Better would be something like:
        System.out.println("What size of pizza do you want?");
        Scanner scan = new Scanner(System.in); // create the scan variable
        String size = scan.nextLine(); // now use the scan variable
        System.out.println(size);Also, when posting your code, please use code tags so that your code will be well-formatted and readable. To do this, place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
[/code]good luck, pete

Incorrect call-up of the extraction program---error while extraction

Similar Messages

Maybe you are looking for