Increase the data access time in custom development scenarios,layouts etc.
Hello All,
We have developed some custom scenario come interface for our Man-hours planning and actual posting. We have also included some validation in them from time to time. Now, it has started taking much processing time during data entry as well as during data saving.
Kindly suggest how can we reduce this time consumption.
Thanks & Regards
Saurabh
Hi Suarabh,
If I am not wrong you need to increase performance.
Use the basis abap standard best practices to acheive this.
This link can be helpful to you ...
ABAP Performance and Tuning - ABAP Development - SCN Wiki
SAP ABAP : best practices - performance techniques | SAP Consulting Development Implementation Remote Support Blog
Similar Messages
-
Reg Increasing the EJB Response Time
We are facing below performance problems in our application,
1. Response time from EJB (Stateless Session Bean) to Client (Swing).
2. Time taken for looping through the Result Set.
For 5000 records, our query is taking 0.2 Secs but looping through the ResultSet is taking around 16 seconds and Response time for transferring 160 kb (object data) from EJB to Client is taking around 30 Secs.
We have achieved some improvement in ResultSet looping time by setting the setFetchSize of ResultSet to 250.
Can anyone suggest?
1. Is there any way to increase the Data Transfer time (Response time) from EJB to Client?
2. What is the ideal value for setting the value for ResultSet.setFetchSize() ( No of records we fetch vary from 1 � 3,00,000 records)1. Response time from EJB (Stateless Session Bean) to
Client (Swing). Consider non-EJB options. They might prove efficient in your case.
2. Time taken for looping through the Result Set. Try and design your code as to not require all the records at a time.
For 5000 records, our query is taking 0.2 Secs but
looping through the ResultSet is taking around 16
seconds and Response time for transferring 160 kb
(object data) from EJB to Client is taking around 30
Secs.
We have achieved some improvement in ResultSet
looping time by setting the setFetchSize of ResultSet
to 250. There is a limit to what you can achieve with that.
Can anyone suggest?
1. Is there any way to increase the Data Transfer
time (Response time) from EJB to Client? I suppose you would want to reduce the response time.
2. What is the ideal value for setting the value for
ResultSet.setFetchSize() ( No of records we fetch
vary from 1 � 3,00,000 records)
shrug -
Hi Experts,
Any one know how to use or what is the purpose of "custom" option present under the data access tab in Excel workbook file format of Data Services
Thanks in Advance,
Rajesh.Rajesh, what is the Custom Protocol you are trying to use? It should be something like PSFTP, etc.,
Cheers
Ganesh Sampath -
The Date Accessed attribute is resetting to all the files in a folder
Hi all,
I have an issue that the "Date Accessed" attribute is often resetting to all the files in a folder if i open single file as this folder is from File server mapped as Drive to me. This is happening to all the users whoever connect to that fileserver
and i see same issue from RDP as well. is there any option to check which is resetting the "Date Accessed" attribute to all the files. The Date Access attribute is simillar to Date accessed and Date modified. We need to fix this issue as it is related
to security concern for us. The file server is windows 2008 R2 and the client machines are windows 7.
Side note: I can see that there is no software, antivirus, offline sycn is causing this issue.
Thank you,
Sampath
P.SampathHi,
It seems that some specific process accessed the files and updated the attribute. You could configure auditing on the shared folder. Then you can go through the auditing log to check which process is doing the read operation on all these files.
Configuring Audit Policies
http://technet.microsoft.com/en-us/library/dd277403.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to find the Date and Time of Modification of Column in aTable?
Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar MI agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime. -
Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.
Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time. -
SCOM 2012 Issue The Data Access service is either not running or not yet initialized
Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch. -
How can I increase the number of times I am notified that I have a text or voicemail .
How can I increase the number of times I am notified that I have text or voicemail waiting to be read?.
DPickRN,
Making sure you don't miss any messages is very important and we would be happy to go over your options today. Are you using the Visual voicemail or do you call *86 to access your voicemails?
CandiceH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Reseting the date and time on photosmart 5510
Having replaced the internal battery,the date and time on scanned items to memory card is giving 1st january 2001.how can i reset this.
Hey @dube55,
I am aware that your Photosmart model does not have a fax. Because I do not have a Photosmart 5510 here and have no access to the Embedded Web Server I gave you the generic tab options. My apologies for the confusion.
The Date and Time option under the Embedded Web Server for your printer should be located under Settings or Tools. It may be under a sub-menu on the left hand side, such as System or Preferences. Feel free to click on the options to explore what you are able to alter on your machine.
If you still do not see a Date and Time option we will need to run a Power Reset on the printer. Doing so should prompt you to enter the date and time when reconfiguring your printer. If this fails, we may need to run a Factory Restore.
How to Perform a Hard Reset:
Turn your printer ON
With the printer ON disconnect the power cable from the rear of the printer for 30 seconds
Plug the power cable back in
The printer should start back up on its own
Once the printer returns to the ready state, try another scan to verify if the time and date stamp is correct
Should the issue persist, please proceed with the reset below.
How to Restore Factory Defaults:
Turn your printer ON
Touch the right arrow button until you see Setup (wrench)
Touch the Setup button
Select Tools
Select Restore Factory Defaults
Choose Yes
Once the Restore is complete your printer should start back up and may prompt you to enter the date and time.
Please let me know if these steps work for you. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
how to set the date and time in apple tv?
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
My brother likes to turn his HP laptop off when not in use, tried everything to get online, and was showing "IE could not display this page", and The certificates you need are out dated. Called M 800 line, no help, they said they would call back,
three days past now...called Comcast, they could not help, gave me new modem and new phone number, six (6) days later still no internet. So was lookinf at desktop, and noticed the date seemed just a bit off...""Friday October 31, 2010"...opps,
off there by four years...changed the date and time to present, IE and access all returned. I would like to hi-5 the prankster since it was Holloween, but really want to know how this really happened...any ideas???Hi, paulmont -
Be sure the Time Zone setting is correct.
If you have time displayed as 12-hour (rather than 24-hour), be sure the AM/PM setting is correct. Having that wrong will displace the mod/create date/time recorded for a file by 12 hours, which will (at times) shift it to another day.
If you use Classic, make sure the same settings are in Classic as well as in OSX, particularly the Time Zone setting. This is especially true for machines which can be and are booted into OS 9. The typical symptom for this being the cause is an offset of one or a few hours. -
The Data Access Service is either not running or not initialized.
When I try to access the OPSMGR 2012 R2 console I get the error:
Failed to connect to server "SCOM01.THG.local"
The Data Access Service is either not running or not initialized.
Date: 3/4/2014 8:41:07 AM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'SCOM01.THG.local'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 10.192.1.27:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine
actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.192.1.27:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.192.1.27:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
System Logs:
The System Center Data Access Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service terminated unexpectedly. It has done this 5 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service entered the running state.
Application Logs
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 0
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 4
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)can you please check the following -
1) SQL services are running.
2) Data access service is running. you can try restarting the service too.
3) check that the OpsMgr database is not full.
4) start the 'SQL Vss writer" service.
5) check the sql server error logs.
6) Check your SQL accounts too.
7) Try this too -
To create this registry entry, follow these steps:
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Right-click Control, point to New, and then click
DWORD Value.
In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click
OK.
For example, to wait 60 seconds before the service times out, type 60000.
Quit Registry Editor, and then restart the computer.
Thanks, S K Agrawal -
Hi,
I have SCSM with remote SQL and the SCSM Management server give below error
Message: Failed to connect to server ‘Name of Server’
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724. —> System.Net.Sockets.SocketException: No connection could be made
because the target machine actively refused it IPAddress:5724
I had try to restart SQL & MS with same error,
Also i had try the following
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
Not help meRegardsI had same error before
below steps to solve it
Make sure SQL Server Running & ServiceManager Database not full
Stop All SCSM Services,
System Center Management Configuration
Microsoft System Center Data Access Service.
Microsoft Monitoring Agent
Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
Start SCSM Services
Microsoft Monitoring Agent
System Center Management Configuration
Microsoft System Center Data Access Service.
Wait 2 min...
check Event Viewer...
hope this help you.
Regards, Ibrahim Hamdy -
Unable to connect to the Data Access service for this management server
Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
BobWell, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error: :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error: :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob -
The Data access service not running or not yet initialized.
Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIGCheck that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali
Maybe you are looking for
-
When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in ad
-
How do I run HD Media from an External Hard Drive?
I have a Macbook Pro, with Final Cut 7. I'm editing clips in HD shot with Canon 7d. I have a 250GB external Hard Drive. How do I set it up as my "Scratch Disk" and able to run all the media I'm editing from there too (for Playback, ect). And in the e
-
Http server to configure mod plsql for creating DAD required by Workflow
Hi, I have a question. Actually, I am working on Oracle Workflow 2.6.3, which need the Oracle HTTP server to configure the DAD. I have already installed Oracle HTTP server (which called Apache Standalone 10.1.2.0.0) using the Oracle Database10g Compa
-
Install oracle 9i on Linux Red Hat 8.0 Professional
Hi all, i need to install oracle 9i on Linux red hat 8.0 professional. I dont know if this platform is certified by oracle and if there are any problem to install that. Any information will be appreciate. Thanks in advance Regards Giuseppe
-
How to drag out additional field in document printing in B1
Hi all expert, My customer need additional field or information to be show at the document printing window in standard B1. Example like customer name or user define field for warehouse. The standard B1 document printing is limited with the form setti