Increments Of 100 With Grad Filter and Adj Brush Using Scroll Wheel and Arrows

For Vista 64 bit and Nvidia GeForce 8500 GT driver version 7.15.11.6960,
both the graduated filter and adjustment brush change at increments of 100 or 200 using the scroll wheel or arrows for everything except exposure. Brightness goes from -200 to 0 to 200 while the others go from -100 to 0 to 100.

Seen that as well. Keyboard focus has been an issue for me on Vista x64 OS for quite sometime.Sometimes the arrows don't move in even increments on all the sliders for various adjustments.
In this case the arrow keys move either side of 0 to the maximum exent of the range. In this case brightness has a range of + or - 200 while the other sliders move = or - 100

Similar Messages

Complex request with range filter and boolean search

Hi
I need a build and maintain complex requests to Oracle Endeca Server. These requests could include different types of attributes: string, datetime, int.
For string attributes I have created a search interface and use boolean search. For datetime attributes I use a range filter. Separately it works as I expected, but it fails with combined search with range filter and boolean search in a single request. As I see from results range filter is completely ignored. What could be wrong with following request?
<?xml version="1.0" ?>
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<ns3:Request xmlns:ns2="http://www.endeca.com/MDEX/lql_parser/types" xmlns:ns3="http://www.endeca.com/MDEX/conversation/1/0">
<ns3:State/>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RecordFilterOperator">
<ns3:RecordFilter Name="OnlyData">AND(NOT(mdex-property_Key),NOT(mdex-dimension_Key),NOT(mdex-config_Key),NOT(mdex-precedenceRule_Key),NOT(system-group_Key),NOT(system-group-membership_Key))</ns3:RecordFilter>
</ns3:Operator>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:SortOperator" Direction="Descending" Key="string_prop" OwnerId="Records"/>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RangeFilterOperator">
<ns3:RangeFilter AttributeName="dateTime_prop">
<ns3:LowerBound Inclusive="true">2012-07-24T19:47:01Z</ns3:LowerBound>
</ns3:RangeFilter>
</ns3:Operator>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:SearchOperator">
<ns3:SearchFilter SnippetLength="20" EnableSnippeting="true" Mode="Boolean" Key="orderSearch">multiple_prop : one</ns3:SearchFilter>
</ns3:Operator>
<ns3:ContentElementConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RecordListConfig" HandlerFunction="RecordListHandler" HandlerNamespace="http://www.endeca.com/MDEX/conversation/1/0" Id="Records">
<ns3:RecordsPerPage>3</ns3:RecordsPerPage>
</ns3:ContentElementConfig>
</ns3:Request>
</S:Body>
</S:Envelope>
If my approach is incorrect could you provide me a a better way to handle such requests?
Regards,
Eugene.

Hi Eugene,
As you know, this issue has been discussed further, so I am posting here the summary of the findings, with the hope that this summary will benefit the Endeca Server user community at large.
* Boolean search only works with range filters for the AND operator. The documentation link above confirms this.
*Because of this restriction, you need to build another query that would achieve the same result. Both options are equally good and would achieve the results you need. Two suggestions that we've received were:
- Option 1. You could perform the key restriction of the search via a restrictive search interface rather than using the boolean match mode. This would involve creating a search interface for each field and then querying against the search interface for the field in question:
<Operator xmlns="http://www.endeca.com/MDEX/lql_parser/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="SearchOperator">
<SearchFilter SnippetLength="20" EnableSnippeting="true" Mode="All" Key="orderSearch_for_field_multiple_prop">one</SearchFilter>
</Operator>
For this option, you would have to create a search interface for each attribute, using the Config Web Service. Here is the topic about loading config documents into the Endeca Server:http://docs.oracle.com/cd/E29805_01/server.230/es_dev/toc.htm#Loading%20configuration%20documents
- Option 2
* You could implement the range filter through EQL row expression syntax instead and pass it in via the DataSourceFilterOperator, which acts as a prefilter on all other query logic, using the Conversation Web Service. Thus you might include:
<Operator xmlns="http://www.endeca.com/MDEX/lql_parser/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="DataSourceFilterOperator">
<DataSourceFilterString>dateTime_prop <= TO_DATETIME('2012-07-24T19:47:01Z')</DataSourceFilterString>
</Operator>
For this option, using the DataSourceFilter does not require you to model the rest of the query in EQL. It will perform slightly better than the filter in option 1 because of the order in which record set intersections are computed, but the difference is likely to be very small.
Finally, if this addresses your question, please mark this question as answered, so that others can benefit from it on the forum. Big thanks to Endeca Server development team (you know who you are!), for helping to find solutions for this request.
Julia
Edited by: JuliaM on Aug 30, 2012 2:05 PM
Edited by: JuliaM on Aug 30, 2012 2:06 PM

Create prompt with date-filter and initialize it with current date

Oracle BI 11 g
Hi!
I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
After that I tied to use Presentation Variable in Prompt, but also without success ((
Please, help me.

I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

What is Wrong with my filter and filter-mapping in web.xml?

First, thanks all for your attention.
I have checked the place where I should place <filter> and <filter-mapping> in web.xm. They should be after the <display-name>, before <servlet> and <servlet-mapping>.
However, as soon as I insert the <filter> and <filter-mapping> elements in my web.xml, all my struts-bean.tld, struts-html.tld, etc. in the web.xml cannot be found at the runtime.
Please help in identifying the problem. Thank you.
<filter>
   <filter-name>trailFilter</filter-name>
   <filter-class>org.osjava.taglib.trail.OriginalRequestFilter</filter-class>
</filter>
<filter-mapping>
   <filter-name>trailFilter</filter-name>
   <url-pattern>*.do</url-pattern>
</filter-mapping>and my web-xml is:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>Struts Example Application</display-name>

<servlet>
    <servlet-name>action</servlet-name>
    <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
    <init-param>
      <param-name>config</param-name>
      <param-value>/WEB-INF/struts-config.xml, /WEB-INF/struts-config-registration.xml</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>

<servlet-mapping>
    <servlet-name>action</servlet-name>
    <url-pattern>*.do</url-pattern>
</servlet-mapping>

<welcome-file-list>
    <welcome-file>index.jsp</welcome-file>
</welcome-file-list>

<error-page>
   <exception-type>java.lang.Exception</exception-type>
   <location>\Error.jsp</location>
</error-page>

<taglib>
    <taglib-uri>/tags/app</taglib-uri>
    <taglib-location>/WEB-INF/app.tld</taglib-location>
</taglib>

<taglib>
    <taglib-uri>/tags/struts-bean</taglib-uri>
    <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
    <taglib-uri>/tags/struts-html</taglib-uri>
    <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
    <taglib-uri>/tags/struts-logic</taglib-uri>
    <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
    <taglib-uri>/tags/struts-nested</taglib-uri>
    <taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
</taglib>
</web-app>

Filters were introduced in the servlet 2.3 specification (j2ee 1.3) - http://java.sun.com/products/servlet/Filters.html.
Your web.xml constraints your web application to adhere to 2.2 standards (according to your DOCTYPE definition in your web.xml). Change it to conform to 2.3 standards
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
        //your definitions
</web-app>Note : Your container should support the 2.3 spec (Tomcat 4.0 and above does, I guess)
ram.

How do I get deleted apps permanently off my phone. I delete the app but when I go to the application icon and update then to purchase I see the deleted apps with a cloud and arrow pointed down. How do I get rid of that.

How do I get deleted apps off my phone permanently. I deleted it but when I go to application icon then update and hit purchase I still see the apps I deleted with a cloud and a downward arrow. Is there a way to get that off your phone.

they are deleted permanently off your phone
but they will forever be tied to your appleID so you can redownload them for free there is no way around that but they are not taking up storage or anything when they live in purchase

Crash bug in Premiere when editing Marker descriptions and using scroll wheel

So I've noticed a really particular bug:
If I go to edit a Marker description in the Markers panel, and I add some text, then move the scroll wheel of my mouse, the program immediately crashes, with these errors:
"[/caravan/releases/2014.09/PremierePro/UIFramework/Src/HotTimecodeControl.cpp-203]"
"[/caravan/releases/2014.09/PremierePro/UIFramework/Src/InlineEditText.cpp-140]"
Then it has the standard: "Sorry, Premiere has to shut down. It will try to save your project" - But it never does make a recovery.
More details:
This happens when the cursor is still active in the description box. If I've clicked out of the description box, everything works normally.
It only happens in the Markers panel, not in the individual Marker dialog box
It only happens after new text has been typed in or pasted in.
It doesn't happen with the Name box
It happens immediately upon touching the scroll wheel, even if it's just a nudge (in either direction)
It happens in every sequence I've tried it in
Tech specs:
Premiere CC 2014 (version 2014.1)
MacBook Pro (15-inch, Late 2011), OSX Yosemite 10.10.1, 2.2 GHz clockspeed, 8GB RAM
Wireless Logitech Mouse (the Anywhere MX) (with Logitech wireless keyboard)
Not a single mouse issue before!
Anyone know if there's a patch or a workaround for this? I know it's specific enough of a problem to avoid, but I work with markers a lot and the scroll wheel on this mouse is sensitive, so can get easily nudged and thus instantly muck up all the work I've done since the last save...
Thanks for your help!

Hi Bob,
So I've noticed a really particular bug:
If I go to edit a Marker description in the Markers panel, and I add some text, then move the scroll wheel of my mouse, the program immediately crashes, with these errors:
"[/caravan/releases/2014.09/PremierePro/UIFramework/Src/HotTimecodeControl.cpp-203]"
"[/caravan/releases/2014.09/PremierePro/UIFramework/Src/InlineEditText.cpp-140]"
Then it has the standard: "Sorry, Premiere has to shut down. It will try to save your project" - But it never does make a recovery.
No promises, but this bug has been marked as fixed in the upcoming version of Premiere Pro. Sorry for all the frustration this has introduced.
Anyone know if there's a patch or a workaround for this?
The workaround listed is, "always remember to exit the control by clicking outside it or tabbing to the neighboring box before scrolling."
Hopefully, the upcoming fix will be done to your satisfaction.
Thanks,
Kevin

CPU load goes to 100% with IMAQ interface and 4 serial ports. Any trick?

Hello to all,
I am using an IMAQ interface in conjunction with 4 serial ports for data acquisition. Both systems run with different VI's. My problem comes when I run both at the same time. In this case the CPU goes to 100%, and both programs slow down drastically. I must keep a sample rate between 300 and 600 ms for the test (easily achieved by the IMAQ or when I run only the VI for the serial ports), but unfortunately the sample rate goes to 3-4 seconds when running both programs at the same time.
I have put “Wait (ms)” in every single while loop, but the delay stays and the CPU is still on the 100%.
Do you have any clue to overcome this? Any help will be greatly appreciated.
Thanks in advance.
Best regards,
Alejo.

Ok, this is my VI for the data aquisition through the 4 serial ports. The block diagram of the IMAQ sofware is password protected and I cannot send it at this time. I hope the problem is in the first one.
Again, thanks.
Alejo.
Attachments:
Micrometers.zip ‏111 KB

How do i recover ipod touch screen with usb cable and arrow to itunes

ipod touch 3 has usb cable and w pointing to iTunes. Can't get it to recovery or restore

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
If necessary:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My Ipad shows the Itunes logo with connecter cord and arrow but wont turn on. How do I fix?

In need of some help, my Ipad turned off two days ago. I pushed the home button and the start to reset. Now it shows the Itunes logo with the connecter cord and an arrow. I plugged it into my PC, and there was an update for my Ipad. Waited the three hours for the update and disconnected hoping that everything was fixed. Would not turn on again so held the start/home and it still shows the Itunes logo, and when I plug it into my PC, Itunes will no longer open. I live three hours away from the nearest Apple store and would like to get it fixed at home if possible.

Did you expect iTunes to start automatically or did you start it yourself? Start iTunes and then connect the iPad.

Menubar with empty space and arrow underneath it

Take a look at the menubar in these two screenshots. How do I get rid of that empty space in the menubar? Also, when I click on the empty space an arrow pops up beneath the menubar, when I click again the arrow dissappears. I tried holding command and dragging it away but it didn't work.

I downloaded an app called bartender and discovered it was Evernote that was causing the problem.

Using scroll wheel with modifier key to zoom out is not working

I can't zoom out with the magnifying tool selected in all programs of the CS3 suite using the option key on a Mac. I can zoom in with no problem. I've been trying to figure this out for "8 hours" now!!!
I do have this checked in the system preferences and Photoshop preferences. I don't think this is considered a keyboard shortcut but I do have universal access checked and zoom out checked in the system preferences.
I searched this site and all of the internet looking for answers but can't seem to find much. I appreciate any help you can give. I'm way behind on my work today.
Thank you!

The default key for scrolling zoom is not Command but Control. To change this, go to System Preferences —> Universal Access and click on the Seeing tab. In the Zoom pane, click on the Options button, and in the sheet that drops down, select the text box at the bottom, highlight the character there, then press the modifier key you prefer.
HTH
Archie

Zoom:Use Scroll wheel with Modifier Keys to Zoom

Help! Since the 10.6 update from 10.4.11, I can no longer zoom in and out by holding Command while moving scroll ring on my Kensington Expert Mouse. I have tried other modifier keys to no avail.
I suspect a conflict, but do not know where to fix it. When in Firefox 3.5.2., Command plus scroll ring zooms the active window nicely. Any ideas or should I provide feedback to Apple or both? Thanks! DJ

The default key for scrolling zoom is not Command but Control. To change this, go to System Preferences —> Universal Access and click on the Seeing tab. In the Zoom pane, click on the Options button, and in the sheet that drops down, select the text box at the bottom, highlight the character there, then press the modifier key you prefer.
HTH
Archie

Picture goes blank when new grad filter or brush used.

When I attempt to use a new grad filter or adjustment brush in LR3.6 the picture goes blank i.e. totally black. The history does not update and I can do no other edits until I Ctrl-Z or go to the grid pane or move to the next image. I am running on Windows 7 64 bit and I have re-installed, twice, (repaired) using the latest downloaded LR3.6 off the adobe site. I have done several integity checks which are successful and the problem occurs no matter what catalog I open, small or big. However, my LR 4 beta works perfectly!? This problem came out of the blue and the only software that I have installed on my machine recently was some Windows updates and Firetower which checks changes to my Startup processes.
Alan

I have experienced this on my old machine running Win XP with 4 GB RAM except that my picture went totally white, not black. I think it happens when LR demands more memory than what is currently available.
To alleviate the problem you could try the following:
- Increase your LR Cache size to at least 25 GB (by default it is set to 1 GB). Set Cache size in >Edit >Preferences >File handling tab.
- Increase your page file, and - if possible - set your page file (a) on a different physical drive than where your OS resides, (b) on a different physical drive where your LR catalog resides.
See also here for optimizing LR performance: http://kb2.adobe.com/cps/400/kb400808.html
WW

802.1x peap mschap v2 with MAC Filter + IP Address Permanent

Hi my name is Ivan, i have an issue
I have one cisco wlc 5508 with ios 7.4.100 with a ssid is working with 802.1x peap mschap v2 with mac filter, and I need configure in the web page of the WLC Security > Mac Filter, a MAC and one IP Address permanent to the users.
I have a service dhcp into the wlc to this profile.
This configuration works fine for 3 or 4 days. At the fifth day , my users renew the ip address, and they can not surfing to internet, because in my firewall i have a policy to the users with exactly ip address, for example.
MAC Filter - IP Address A - UserA
My policy say:
PolicyUserA - Internet
Please, i can establish an filter mac associate to one ip address permanent to one user, when service dhcp in the cisco wlc is active?
I possible to do it?.
How can i do it?

Hi Ivan,
You can not map the mac-ip address pairs on the WLC DHCP.
The WLC has a limited DHCP server functionalities. You better to use an external DHCP server with full functionalities and then you can configure the DHCP server to provide the same IP address everytime to each client in your network.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Content iView With out filter not displaying folder content

Hi!
I´m creating a ContentiView with out filter and pointing it to a document Folder, when the user access the iView this message appears:
http://oneworld.neoris.net:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fDemaBanorte!2fDemoBanorteRol!2fHome!2fBanortePage!2fContentiViewWOFilter/documents/BanorteDocuments
The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work.
And when I click on "Access the folder using the Navigation user interface." then I can see the folder structure and its contents really nice.
is there a way to configure the iView that allways display the content this way with out the user clicking on the "Access the folder using the Navigation user interface." option. ?
Thanx in advanced!
Gerardo J

Hi,
I resolved the problem using a KM Navigation iView, this iView has the functionality I was looking for and this displays the folders and then the content of the folders if we click on the folder. with the edit etc etc functionality.
kind Regards,
Gerardo J

Increments Of 100 With Grad Filter and Adj Brush Using Scroll Wheel and Arrows

Similar Messages

Maybe you are looking for