InDesign 2014 Installion with Settings and Prefs Moving Over From old CC

A while back I installed InDesign 2014 as it became available. However, as the installation process and updating my preferences were not at all seamless, I deleted all the InDesign files, or so I thought, and went back to InDesign CC. I again attempted to install InDesign 2014 using the Creative Cloud App and this time it only installed a Plug-ins and Utilities folder inside an InDesign 2014 folder, no App and no other support files.
Please advice as how I can install InDesign 2014 using the Creative Cloud App, so it knows that it was installed, and move all my settings and Preference over to the new InDesign 2014?
Any assistance and help will be greatly appreciated.

It sounds like you never UNINSTALLED InDesign CC 2014. You can do this by going to your Applications folder, opening the InDesign CC 2014 folder and running the Uninstaller. Then reinstall from the Creative Cloud desktop app.

Similar Messages

Issues with new bill payer taking over from old bi...

Hello,
The old bill payer has moved out of my shared flat and I have taken over as bill payer. Two weeks ago I rang BT and signed up for a new contract. Last week I rang again to say that I was leaving BT and spoke to the 'retentions team' who negocitated a cheaper contract for me. So, I signed up for new a 12 month contract with BT.
I would like to know what information is connected to our account because the OLD bill payer has recieved confirmation emails (which should have been sent to me). He has cancelled the old direct debit and now the NEW contract is being threateneed to be cut off. The NEW contract still has the old bill payers name and should have my name instead. I have not been sent any confirmation letters with any account numbers or details of my bill breakdown and I have not been sent any forms to set up a new direct debit.
The people at the call centres do not understand my problem. They have corrected the account to have my contact email address but addressing me as the old bill payer. I am completely confused and would like to know what is going on!

I understand that a new bill payer has to take out a new account (I googled the problem). I explained to the people in the call center what was going on and said that I needed to take out a new contract. It appears that ithe people in the call centre have made a huge mistake and I dont know what to do about it
No security questions were asked, my housemate has not rang them once (and I am female and he is male!), I dont know the account number so theyre doing it all from the phone number. I could have been anyone.
I think I am still within the 14 day cooling off period from when I phoned customer retentions, so Im highly tempted to call them back and change providers completely because this is a nightmare!
I also cant believe that a proceedure for this isnt in place (close old account, start new account) - there are so many shared houses in London!

My wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

my wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

graham218 wrote:
are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?
Generally YES.
It's possible to hold separate iTunes library's on a single machine.
Generate two new folders inside the Music folder of the Mini and name them differently; e.g. man and woman.
Copy your whole library into "man" and your wifes into "woman"
Go to sharing in the system settings of the Mini and share the Music folder in your network.
After copying the whole library's to the Mini you may point iTunes to the new location at startup by holding the option key (alt) at the keyboard.
iTunes will then ask you where the library is located.
Point it to the matching library on the Mini.
That's all.
Lupunus
PS ... If you both use only the Mini you have to setup a user account for each and just copy the whole library to the Music folder in particular.
Message was edited by: lupunus

What is error 150:30, and why won't CS4 work after moving it from old mac to new?

What is error 150:30, and why won't CS4 work after moving it from old mac to new?

Reinstall the software properly
Mylenium

I´ve made four Columns with text and an Image over the middle of two columns. How do I put a text u

I´ve made four Columns with text and an Image over the middle of two columns. How do I put a text under the Image that spans over the Columns?

Did you mean that?
or
Did you mean that?
Let me know.

I bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

i bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

How did you "move everything" over?
Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
LN

Just got new macbook pro (13inch) and restored all data from old mac via time machine. Now whenAudio drop out for 3-4 secs every 10 - 15 secs!! What is going on and what can I do?

Just got brand new macbook pro (13inch) and restored all data from old mac via time machine. Now when I p/back a track in logic I get audio drop out for 3-4 secs every 10 - 15 secs!! What is going on and what can I do? Its the same version of logic and all other functions seem fine!

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

I need to authorize an new computer but I am at the limit of five and can't reauthorize from old computers as they are either dead or not in my procession. How do I unauthorized all computers so that I can authorize my new computer?

I need to authorize an new computer but I am at the limit of five and can't deauthorize from old computers as they are either dead or not in my procession. How do I deauthorize all computers so that I can authorize my new computer?

The page Roger posted is good but was very confusing for me. I'll try to help you out since that article was confusing to me.
In iTunes, Click your name/email that is directly to the left of the search bar.
Click account info.
Sign in.
Click this button where the mouse is:
(the screenshot is from an older iTunes on windows, but it is the same on the new versions)
Done!
You can only use that button once per year, so try to remember to deauthorize computers before you get rid of them.

My daughter is locked out of her ipad...has been for months. we want to start using it now and are trying to disable it and start all over from scratch. what should we do?

my daughter is locked out of her ipad. has been for months. we want to disable it and start all over from scratch.what do we do?

Will the iPad power up by holding down on the power button until the Apple logo appears on the screen? If it does, try restoring using recovery mode.
Recovery mode - Support - Apple

Problem with junkmail folders after moving gwia from netware to linux

Recently moved our gwia that handles internet email from Netware to Sles
11 GW8.0.3 hp3. Email is moving in and out ok, but I'm getting some
really weird strangeness with Junkmail settings. Just like the old
gwia, this gwia has it's own domain/mta. Postoffices are under
different domains/mta's.
1. Email flagged with "x-spam-flag: yes" is no longer automatically
being moved to the junkmail folder. Yes the box is checked for this
particular's gwia settings, and I've even uncommented it in the gwia.cfg
file to to be sure it's enabled.
2. With the "view" column enabled in the client I can see that normal
email coming in gets set with the tag "internet" Email coming in with
"x-spam-flag: yes" in the header gets set with the tag "IPM.Novell.ND"
If I right click on one these to try to manually set it as junkmail, I
get a message that the message is "Not Eligible for Junk Mail Handling"
and when I click on that a window pops up saying "This is a POP message.
Only internet mail sent to your Groupwise account is eligible for Junk
Mail Handling"
For whatever reason instead of moving the email to the junkmail folder
when the x-spam-flag is set, it changes it to type IPM.Novell.ND and
then the client thinks that it's some sort of POP message instead of an
internet email. If I redirect incoming email back through the old
Netware gwia instead, everything works fine.
What could possibly be going on?

Originally Posted by Mike
Recently moved our gwia that handles internet email from Netware to Sles
11 GW8.0.3 hp3. Email is moving in and out ok, but I'm getting some
really weird strangeness with Junkmail settings. Just like the old
gwia, this gwia has it's own domain/mta. Postoffices are under
different domains/mta's.
Did you create a new Gateway ( gwia ) object? Or recycle the old one ( which is usually a huge no-no. ) I suspect you created a new one, as you refer to the old NetWare GWIA. But you never know.
Originally Posted by Mike
1. Email flagged with "x-spam-flag: yes" is no longer automatically
being moved to the junkmail folder. Yes the box is checked for this
particular's gwia settings, and I've even uncommented it in the gwia.cfg
file to to be sure it's enabled.
Its only enabled if the run-time config says it is. ;-) Look at the settings listed in the HTTP console for the GWIA or the GWIA logs, which dumps the settings actually being used. You may find the setting is not really effective. Check for differences between the two GWIAs effective config.... something may stick out.
In the message properties there is a junk mail handling section, can you give us an example of working / non-working versions?
Note also:
Support | Junk mail delivered to Inbox <-- buggy or unexpected behavior
and
Novell Doc: GroupWise 8 Administration Guide - Blocking Unwanted E-Mail from the Internet <-- xspam.cfg
-- Bob

Having problem with adding and reading dates to/from database !!!

Hi
I am new in J2ME
I am trying to code a simple software.
My problem is with dates.
I have a datefield on my menu and the user will choose the date from here. By default, datefield shows todays date. But when I try to write that date to database using rms, date value transforms to java.util.Date@acfdb0fe.
As I read from tutorials this is common problem of date class, so I tried to use calendar class.
But with Calendar class I cannot let user to choose date from screen like DateField. datefield dowsn't work with calendar.
later, I will use that date for sorting records
Summary : I need a sample code that read date from screen (preferably with datefield), write it to recordstore. and then read it from recordstore asnd write to screen.
I searching internet for a sample code through days.
Please help me
Thanks

Hi,
The best i would suggest is instead of storing the date as 19 Jan 2004 or something like this better store the date in milliseconds.
DateField df = new DateField();
Date d = df.getDate();
long ms = d.getTime();
store the value of ms in RMS. This is the commonly used way to store date in RMS for j2me.
You can get back date using
Date d = new Date(ms);
DateField df = new DateField();
df.setDate(d);
Prabhu.

Getting new Hard Disk. Need help with moving files from old one.

Hey guys so here is my dilema. So I have a Lacie 500GB Hard Drive and made the mistake of accidently deleting all my backups.db into the trash but thankfully never emptied that. There was no way to put it back into the backups folder so it caused me a lot of distress. I have decided to grab a portable hard disk instead such as the Western Digital. Heres my thought. I really only want to transfer a few things from the Lacie such as photos, movies, and a few documents from all the backup dates but nothing else. Is there a way to maybe automate so that certain files will transfer over instead of it all?
Thanks in advance!
On a sidenote, if you have any suggestions for portable, small, lightweight, yet large capacity (at least 1TB) portable hard drives let me know!

Lacie is a Seagate drive
To move specific files, open the backup database (time machine, backups.db). When you open Time Machine and select a date to restore from, you should see a Finder like view of that particular backup. Navigate through the backup the same way as you would through the Finder and choose the folder or files you wish to restore.
iGrom
On a sidenote, if you have any suggestions for portable, small, lightweight, yet large capacity (at least 1TB) portable hard drives let me know!
Dont get the WD, currently theyre having some issues with Mavericks ( https://discussions.apple.com/thread/5475136?start=255&tstart=0 ) and aside from this not the drive most here would recommend.
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim and perfect
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
$88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
Most storage experts agree on the Hitachi 2.5"

Help with PS and HDR Effect Pro from Nik

I altready have a help request into Nik Software, but was hoping someone here could offer some suggestions.
I'm running the Nik Complete software program on Win 7 64Bit, Raid 5 machine. 8800 GTS 512 MB card; 12gb of RAM, i7 quad core, 2.67 GH, PS CS5 and Lightroom 3.2, Wacom Intuos 3 tablet.
I have the most updated drivers for video, wacom tablet. OS is current with updates. PS CS5 is updated, but I am NOT running Lightroom's 3.3 RC.
I updated all software updates for the NIK software collection from their site and still have the same problem even after uninstall and re-install.
When I attempt to run HDR Efect Pro I get the menu window to select my images, click ok and with in seconds I get the message that Adobe Photoshop CS5 has stoopped working and must close...
I've gone to their site and looked into their FAQ/troubleshooting and did all their recommendations, update drivers, look for color profiles with 0 Bytes in the system color spool for both 32 and 64 bit apps and still no luck. This also happens with CS4 and CS3 and if I attempt to use the program form Lightroom and Bridge. Any ideas, work arounds, suggestions? Their automatic reply from my support request says 2-3 days due to the high populaity of their program!!!
Thanks for any and all help.

Outside of suggesting some pretty generic things, I can't offer much help... I don't use Nik products myself
You could try disabling the "Use OpenGL Drawing" setting in Photoshop as a workaround to see if that helps. Perhaps between Photoshop and the plug-in problems are being caused in the OpenGL driver for your particular video card.
Also, given that 3rd party plug-ins and Photoshop could be competing for memory, you could try changing the amount of memory Photoshop is allowed to use in the Edit - Preferences - Performance dialog.
Good luck.
-Noel

Downloaded 2014.2.0.569 and now can't open old muse cc site

I just updated my muse to 2014.2.0.569 and it will not let me open my old muse site. when I go to the folder, it doesn't open anything

Hi Robert,
Are you getting any error when trying to open the .muse file in Muse?
- Abhishek Maurya

Please help. Why aren't my hyperlinks moving over from one document to another?

Firstly I'm using Adobe InDesign 5.5
I have document A, which has over 50 pages.
Then document B, with over 40 pages.
All the pages on document B, I want to 'move' over to document A, so document A will now have 90 pages and I'll no longer need document B. The issue is, when I move the pages over, the hyperlinks I have throughout document B don't move over (which there are over 30 hyperlinks on certain sections of certain pages).
Now it seems like the only 'slow/safe' process of doing this, is to copy page 1&2 of Document B, and then 'paste in place' on document A, and then go back to B and copy pages 3&4. this is a long process...considering I have over 2,500 pages to get through.
Why aren't the hyperlinks moving over? When I go back to document A, I click on the hyperlink tab and it's blank.
It's really annoying and I'm trying to figure out why this is even happening and can't find any solution online.

You should save both documents before doing that with Save as into the same folder, so thel links will not change.
I would recommend to package your files after doing that.

InDesign 2014 Installion with Settings and Prefs Moving Over From old CC

Similar Messages

Maybe you are looking for