Indesign CS5.5 cannot open CS5.5 indesign file

Hello all,
I created an InDesign CS5.5 file yesterday and today i can't open it anymore from the officer server.
When the file is on the server at the office and i try to open it, a pop-up shows this:
"Cannot open the file "filename.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application".
It doesn't work for any other InDesign files on the server neither and it is not open in another application or on another computer at the office.
When i transfer that file on my desktop it works fine, but i can't work that way at the office of course.
Has someone an answer to that ?
Thank you,
Thierry
--------------------------------------------- EDIT ---------------------------------------------
For all who have this error, restart your machine and it works fine!
Cheers,
Thierry

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Similar Messages

  • I am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and i

    i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and it claims to be downloading but this is not happening at all. I am on a Macbook Air and Abobe for my $600 a year membership you have totally ruined by Friday night. If there's a human being out there at Abode please respond now

    Hi,
    If you have already subscribed to the membership, please follow the help document below:
    https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    Regards,
    Sheena

  • InCopy CS4 and InDesign CS4 cannot open file at the same time!

    I have 2 editors that make changes in my indd file. The one editor is able to open the file concurrently with myself (i'm in indesign) just fine. But when the other editor wants to open the file....I cannot open the indd file and vice versa. We are PC based.
    shane

    Yes, we are all working on the same server.
    And Yes on the Editor A / scenario 1  (Designer opens file and Editor A opens file concurrently). works fine.
    Editor A closes out of Incopy and so does Designer. Editor B opens the file and Designer tries to open the indd file and now the designer gets the warning: Cannot open document. You may not have permission or the document may be open already. This is the same error if the Designer opens the file first and Editor B tries to open it while the designer has it open.
    Editor A and B are able to have the file open at the same time no problem.
    Also this happens to all indd files that Editor B tries to open. So it is not linked to a problem with the file.
    one other note: on the server just above the indd file...when Editor B has the indd open in InCopy... a 'temporary' Indesign Lock File appears.
    shane

  • After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new

    I had the problem before. Reinstalled Photoshop CS5 and updated again.
    Clicking a file starts Photoshop but does not open the file.
    If I click "new" to make a new file, nothing happens.
    Help....!!!!!!

    Hi PE
    Yes, but nothing happened.
    I was instructed to press some key during startup of Photoshop, and it should reset the program.
    However, it did not work.
    Br
    Lars Hansson
    Den 29/10/2013 kl. 11.49 skrev PECourtejoie <[email protected]>:
    Re: After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new
    created by PECourtejoie in Photoshop General Discussion - View the full discussion
    Hansson, did you get a window asking you if you wanted to reset your preferences.
    Maggedotno, is it the english version? Do you have third party plug-ins? Can you post the contents of help>system info?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5796463#5796463
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5796463#5796463
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5796463#5796463. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Hi There, cannot open an InDesign document in CS3. Getting Plugin errors

    I have a InDesign document created in CS4. I cannot access the file from a computer with CS3. I get a lot of plugin errors at the start up.
    Please help as this is a very important document

    @Naga Sai J – you cannot open an InDesign CS4 file in the previous version.
    But you can export an exchange file format for InDesign CS3.
    Go to File/Export and chose INX for export: "InDesign CS3 Interchange-Format (INX)"
    That .inx file could be opened with InDesign CS3.
    After opening the .inx file, examine it well!
    Some things might have changed (things regarding to newer or changed features from InDesign CS4).
    Uwe

  • How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

    I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
    I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
    Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
    Any guidance is much appreciated.
    AJ

    Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
    Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
    So you currently have 4 choices.
    1 upgrade Photoshop
    2 get Lightroom - latest version
    3 get Photoshop elements -latest version
    4 get dng converter - this will download the latest version an is the only option that is free.
    The dng converter can be found by searching Adobe website.

  • How to get Adobe Bridge CS5 to open an FLV file in another program?

    Hello Folks,
    How do I get Adobe Bridge CS5 to open an FLV file in another program other than Flash CS5?
    When I double click on an FLV video, it always opens Flash CS5.  I want to be able to use one of my other FLV player apps instead.
    Thanks

    How do I get Adobe Bridge CS5 to open an FLV file in another program other
    than Flash CS5?
    When I double click on an FLV video, it always opens Flash CS5.  I want to be
    able to use one of my other FLV player apps instead.
    For single use when having pointed the cursor on that file with right mouse
    click choose open with and choose the wished application from the fly out
    menu.
    For permanent use go to Bridge Preferences File Type Association section and
    from the list find the .flv file extension. In this line you can select the
    little triangle next to Adobe flash and from the list select the one you
    prefer, now the all open in this chosen app.

  • Is it possible to have cs5 Bridge open cs4 ai files actually in cs4 rather than opening them in cs5

    I recently upgraded from mac cs4 to cs5.5. Due to a bug? with cs5 ai illustrator 'Pixel Preview' won't show 1 bit tiff files as it did in cs4 (the workaround is time consuming/wasting). This is a problem for me as most of my files contain them, GGrrrr. Is it possible to have cs5 Bridge open cs4 ai files actually in cs4 rather than opening them in cs5?

    Is it possible to have cs5 Bridge open cs4 ai files actually in cs4 rather than opening them in cs5?
    Yes, either set the file type association in Bridge prefs for 'ai' at CS4. But it seems somewhat difficult when having newer versions, sometimes whatever pref settings in Bridge or Finder/get info/ open with/you try it keeps opening in the latest version.
    In that case either drag and drop the files on the CS4 icon in the dock or with right click mouse menu choose open with and select illustrator CS4.
    Although you can only have one version of Bridge open at the time you can have the other suite applications from different version open at the same time.

  • I cannot open this PDF file in Acrobat 8 Pro or in Acrobat Reader on Windows 7 64-bit

    I have a PDF file that I could open on my Windows XP 32-bit laptop in Acrobat 8 Pro or in Acrobat Reader.  I then upgraded to a Windows 7 64-bit laptop.  But now in Win7-64, I cannot open this same file using the same apps (Acrobat 8 Pro & Acrobat Reader XI). 
    When I try to open it in Acrobat 8, it does not load and instead a popup windows appears saying -
    Adobe Updater
    Some components needed to complete this operation are missing but information about them may be available on the Adobe website. Would you like to search the Adobe website for the missing components? 
    And I can choose either the OK or Quit buttons.  When I click OK, a web browser starts and goes to this website -
    http://www.adobe.com/special/adobe_update_manager/?type=Filter&name=FOPN_foweb&version=0.0 .0.0&lang=en_US&os=Windows&osver=6.1.7601&appid=acrobat8pro-en_US&cpu=intel
    This webpage says -
    Adobe Update Manager
    Adobe cannot locate the requested plugin. New plugins will be listed on this page. Currently there are no plugins.
    So now I am stuck, no direction to go.  I am left without any solution from Adobe for Acrobat on this file.
    When I try to open this PDF file in Reader, it does not load and instead a web browser is spawned loading the webpage -
    http://plugin.fileopen.com/Default.aspx?bhcp=1
    This is the FileOpen Plug-in for Adobe Acrobat/Reader, which prompts to -
    Please click OK to download the FileOpen Plug-in Installer for Adobe Acrobat/Reader 
    I click on OK, download and run the Installer file, accept the terms, and installed the FileOpen Client (x64) B928.  Upon completion, it prompts to Finish.  But it does not automatically bring Reader up or try to load the file.  So I try again to load the PDF file into Reader.  But once again, the file does not load and the web browser is spawned loading the same FileOpen Plug-in Installer link.  I click OK again, and start the same FileOpen Client process.  This time, it recognizes that I have FileOpen Client installed, and the window gives me two choices, Repair or Remove.  So since I apparently need this Plug-in, I choose Repair.  The process seems to complete the Repair.  But when I try to load the file, it still brings me back to the FileOpen Plug-in webpage.  So now I am stuck again, and left without any solution from Adobe for Reader on this file. 
    I tried Adobe support.  But apparently Adobe does not support past releases of their products (Acrobat 8), and also does not give free support for the current version of their free products (Reader XI). 
    Can this be fixed? 

    How is Acrobat 8 not fully Windows 7 compatible?  I see discussions on this Adobe Community saying how Acrobat 8 does work on Windows 7 and with 64-bit.  It appears that if Acrobat 8 is updated to the latest version, then this should fix AA8-Win7 issues.  And I am at the latest AA8 version, 8.3.1. 
    And how are Acrobat 8 and Reader XI are not compatible?  I have always had Acrobat and Reader installed on the same PC, without ever having any issues.  And Adobe allows the installation of one after the other.  So apparently Adobe allows them both to exist together.  If they are incompatible, then why would Adobe allow them to exist together? 
    Anyway, I did uninstall the FileOpen Plug-in and the Reader XI, then reinstalled the FileOpen Plug-in.  So now Reader is not installed and only Acrobat 8 is installed.  I then tried to load the PDF file, but I still get the Acrobat 8 error described above. 

  • I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

    I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as  I have associated .pdf files with adobe reader. My operating system is windows 7.
    When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'.  I have not changed my security settings (Tools, Internet Options, security).

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • Cannot open my NEF files in Photoshop CS6 from my new Nikon D800 camera.

    That's it, I Cannot open my NEF files in Photoshop CS6 Camera Raw from my new Nikon D800 camera. What am I doing wrong or what is wrong? I have the plug-in Camera Raw 7. and can open TIFF files but not the NEF files.
    Peace,
    Charles Fennen

    Hi ssprengel,
    to explain the scenario, i am basically a D7000 user and I do post production with Windows computer. But for an assignment I have hired D800, they have provided me their SD memory card. I have used the same memory card while shooting.
    I have transferred the NEF files from the camera using Nikon software. The transfer was successful but i am not able to open the Raw NEF file with ACR. Even my plugins are updated till date.
    The NEF thumbnails are having small lock logo in the bottom left corner. I do not know what does that mean. Like this.
    Kindly let me know what would be the prob? if my RAW files are corrupted kindly let me know how will I recover them?
    Thank you.

  • Cannot open QB 2007 file after installing R7 upgrade

    I installed the Quickbooks Pro 2007 "upgrade" and then tried to open my old Quickbooks Pro 2007 for Mac company file.
    1.) It asks me if I want to Upgrade the file (no choice)
    2.) Then it simultaneously says "Working" and gives me a warning about the file not being able to be renamed and that I have to rename it and save it in the QB folder.
    3.) Then - whatever name I give it - it says it could not create the upgraded file.
    4.) It also says that it could not open the existing file.
    I'm not sure what to do - the file is only 4.7MB and I've tried every combination to get it to open.
    Is there some trick? Nothing about this on the Intuit Forum. Nothing on Google either.
    Help would be greatly appreciated as I cannot open my business file!

    I guess what is happening is that I originally installed quickbooks and the company file on my macMini and I suspect that it is not opening it on my iMac because of a sharing violation.
    I did unlock both the application and the files but they still won't open.
    Any suggestions would be appreciated.

  • Mac Word 2008 - hyperlink message "Word cannot open the specified file"

    I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
    Any ideas what could be wrong?
    My OSX is 10.5.1.
    The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
    START OF PASTE FROM SMASHWORDS STYLE GUIDE:
    How to create a linked Table of Contents. Consider this feature in “beta.” My
    thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
    which I have augmented based on my own experience adding a ToC to the Style
    Guide (woo hoo!).
    By adding a linked table of contents, you can help readers navigate your
    document. This is especially useful for non-fiction. Most fiction doesn’t
    need it. If you follow the instructions below, the ToC should work in your
    EPUB, MOBI and PDF files, but it will not work in our other formats.
    First, create your table of contents where you want it by typing it out. Make
    sure the text is normalized just like the rest of your Smashwords’ Word
    document. Example:
    Contents
    Chapter 1
    Chapter 2
    Chapter 3
    Chapter 4
    Etc.
    Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
    Booksmark function is under the Insert tab. Go through your document, and at
    each Chapter Start or Indexed item, you will highlight it and then select
    Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
    item and then click add. It’s very important to use the first word of your
    heading you’re linking to, because later on, when you add the hyperlinks,
    Word displays the bookmark shortcuts in alphabetical order. With many
    bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
    tough to link to the correct bookmark. If you want to link to a chapter named
    How to Publish Ebooks, I’d recommend naming your bookmark
    “HowToPublishEbooks” to make it easy to locate. If you instead name it,
    “publishebooks,” you’ll frazzle your brain and make mistakes.
    Repeat the process above for every Chapter Start as well as for other matter
    in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
    to every section in the Style Guide, because otherwise the ToC would have
    been three pages long. This is your call.
    Next, return to your table of contents and highlight the word “Contents.”
    Click insert, bookmark, and label this last bookmark “Contents”. Formatting
    note: Bookmarks cannot have spaces or odd characters. If instead of
    “Contents” you called the label in the document Table of Contents, as I did,
    then when you insert the bookmark, name the bookmark “TableofContents,” one
    word, or “toc.”
    Next, add the hyperlinks to your Chapter Starts. In your table of contents,
    if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
    insert Hyperlink. As you can see in the Style Guide, I tried to use more
    descriptive labels. In Word’s Hyperlink menu on the left hand side, select
    “Place in this document.” You will now see your bookmarks listed in the main
    window. Select Chapter1 bookmark (or whatever you labeled it) and then click
    ok. Do this procedure for every chapter and piece of matter in the table of
    contents.
    Final step. Now you can link back to the Table of contents. Move through your
    document to each indexed item or Chapter start and highlight it. Then click
    insert, hyperlink, and then select “Place in this document.” When the
    bookmarks are showing in the main window, select the bookmark labeled
    “Contents,” assuming that’s what you named your Table of Contents. Do this
    for each and every chapter and or indexed item.
    After you are done, all your links will be underlined. You will need to test
    and make sure you linked everything properly. In most Word versions, you just
    click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
    hyperlink and make sure it takes you where you need to go in the document.
    Advice: Word has an automatic ToC generation feature under the reference tab.
    Do not use this. It uses automated headings and formatting to generate the
    ToC and this will un-normalize your text and cause font conversion issues in
    your Smashwords files.
    END OF PASTE FROM SMASHWORDS STYLE GUIDE.
    I did all that as described but I still get the message "Word cannot open the specified file".
    Could you help please?

    This question would be better addressed to...
    http://www.microsoft.com/mac/help.mspx
    I think the operative phrase from that article is...
    *Consider this feature in “beta.”*
    -mj

  • IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

    Hi there,
    i hope i'm in the right board.
    I recently tried to compress avi-files i collected from various cameras throughout the last years.
    At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
    I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
    So i gave it a last, let's call it fail-proof, try:
    I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
    All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
    I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
    Thanks in advance
    Markus
    P.S.
    I'm using LabView 2010 and VAS of 02/2014.

    Hello Markus,
    have you had a look at this:
    Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
    Compressing avi files-Discussion Forums
    Regards,
    eletra

  • Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

    Hi Gurus,
    I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
    OS: OEL5 32 bit
    oifcfg iflist
    eth0 192.168.2.0
    eth1 10.0.0.0
    oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth1 10.1.1.0 global cluster_interconnect
    eth0 192.168.2.0 global public
    cat /etc/hosts
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    My questions are:
    should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
    if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
    Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
    Edited by: ayyappa on Aug 20, 2009 10:13 AM
    Edited by: ayyappa on Aug 20, 2009 10:14 AM
    Edited by: ayyappa on Aug 20, 2009 10:15 AM

    a step forward towards resolution but i need some help from the gurus.
    root# cat /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    root# /u01/app/oracle/product/crs/bin/oifcfg iflist
    eth1 10.0.0.0
    eth0 192.168.2.0
    root# /u01/app/oracle/product/crs/bin/oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth0 191.168.2.0 global public
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    ****ORACLE_HOME environment variable not set!
    ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
    root# export ORACLE_BASE=/u01/app/oracle
    root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
    root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
    root# export PATH=$PATH:$ORACLE_HOME/bin
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP does not exist.
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
    VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
    Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
    My questions to the gurus are as follows:
    Should ping on vip work? It does not work now.
    srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
    VIP is not running on node: sunny1pub
    GSD is not running on node: sunny1pub
    PRKO-2016 : Error in checking condition of listener on node: sunny1pub
    ONS daemon is not running on node: sunny1pub
    [root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
    Name Type Target State Host
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

  • Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

    Hi Friends,
    I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
    My OS is Redhat Linux (64 bit).
    What's the issue?
    onfiguring the installer for this system's environment...
    awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    Launching installer...
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    [oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
    Regards,
    DB

    Hi;
    I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
    If you run appstier be sure you source env file with applmgr user
    Regard
    Helios

Maybe you are looking for

  • Snow Leopard 'error code 50', 'Low Application memory'. Help.

    Hi. I've been facing **** lot of problems with my MBP of late, and all that I could try have turned unfruitful. I'd appreciate some help. Problems started when I downloaded and tried to install SL update 10.6.7 on 10.6.6. It was working fine on 10.6.

  • Where is the README for 11.2.0.2???

    Hi there, in the following link http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html download the version 11.2.0.1 of the database, but you also read the following comment: "9/13/10: Patch Set 11.2.0.2 for Linux is now a

  • Using Enterprise Java Beans

    Hi Guys, Ive built a system which uses 8/9 servlets and connects to a postgres database, reads csv files and a few other things, now Ive been asked to implement this using java enterprise beans, how easy/difficult is this? how would I go about it and

  • Preview is freezing repeatedly

    I'm running a new iMac with OS X Lion 10.7.4. Whenever I open the application Preview, it goes to fullscreen and stops responding (presenting the rainbow wheel) for a number of minutes. This happens everytime the scanner scans a file and opens in on

  • Every time I type something in Notes it disappears. Anyone know why and how to fix it? Thanks

    Every time I type something to Notes it disappears. Anyone know how to fit this? Thanks