Index on Key

Hi There,
I'm trying to add an index using a KeyExtractor which is use in a filter. It appears to be complaining that there is no method on the entry. A filter using the and EqualsFilter(KeyExtractor()) works fine. I'm guessing it's complaining because it's not going to the key but the entry. I can get over this by duplicating the object from the key into the object but it just seems a shame.
2008-04-17 11:53:34.137 Oracle Coherence GE 3.3/387p6 <Error> (thread=DistributedCache, member=1): Exception occured during index rebuild: java.lang.RuntimeException: Missing or inaccessible method: com.rbos.risk.domain.portfoliomanager.PortfolioKey#getPortfolioKey[]

I do, although I've just rationalised that into a static final and use both for the filter and the index, and it now seems to work.
It must've been some mismatch in what I thought was going on, sorry to have troubled you :)

Similar Messages

Error in Executing a Interface -- Index Duplicate Keys

Hi All,
I ran my Interface 2 times , it was working fine..... but after that when I ran I got these Error...where I am doing the mistake.............
KM I used :
LKM SQL to ORACLE
IKM ORACLE INCREEMENTAL UPDATE
CKM ORACLE
The Step I am getting this Error is : Create Unique Index on Flow Table
1452 : 72000 : java.sql.SQLException: ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
java.sql.SQLException: ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Thanks
AK
Message was edited by:
Ananda

Hi Anand-
This is completely data issue, when executing the unique index step it will create unique index with the column name you mentioned.
When you ran the first two loads there was no duplicate keys found in the data that's why you didn't get the error but the third run you got the problem.
Check your data records and made changes in the KM as Bouch told if you don't want to create unique index.
Thanks & Regards,
Saravanan Rajavel

Error: ORA-06502: PL/SQL: numeric or value error:NULL index table key value

Hi,
I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
My Approach is :
a) Create a record type variable ( concists of multiple segments)
b) Create a pl/sql table type of the records type in a)
c) Created a cursor of same structure as pl/sql table type ( collects data)
d) BULK CoLLECT data from cursor into pl/sql table
e) Print the data
But during Bulk Collect i get the below error :
Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated Bind

Ashish_Apps wrote:
Hi,
I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
My Approach is :
a) Create a record type variable ( concists of multiple segments)
b) Create a pl/sql table type of the records type in a)
c) Created a cursor of same structure as pl/sql table type ( collects data)
d) BULK CoLLECT data from cursor into pl/sql table
e) Print the data
But during Bulk Collect i get the below error :
Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated BindVerify the rows you are fetching are having the same data types as your Record like Dates should go to date , decimal should not be fetched in type defined as number etc.

ORA-06502: PL/SQL: numeric or value error: NULL index table key value??

Hi,
Can anyone let me know what is the issue on below code and how can we avoid that? i am getting the error like below
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
                    v_while_loop := 1;
                    v_delete_char_id := v_tabtype_result_values.FIRST;
                    WHILE v_while_loop <> v_tabtype_result_values.COUNT
                    LOOP
                        IF check_duplicate_nc_data (v_result_view,
                                                    v_tabtype_result_values(v_delete_char_id).value,
                                                    v_collection_id,
                                                    v_occurrence,
                                                    v_plan_id,
                                                    v_delete_char_id
                        THEN
                            DBMS_OUTPUT.PUT_LINE(v_delete_char_id);
                            v_tabtype_result_values.DELETE(v_delete_char_id);
                        ELSE
                            DBMS_OUTPUT.PUT_LINE(v_delete_char_id||','||v_tabtype_result_values(v_delete_char_id).id||','
                                                    ||v_tabtype_result_values(v_delete_char_id).value||','
                                                    ||v_tabtype_result_values(v_delete_char_id).validation_flag
                        END IF;
                        v_while_loop := v_while_loop + 1;
                        v_delete_char_id := v_tabtype_result_values.NEXT(v_delete_char_id);
                    END LOOP;

Change:
WHILE v_while_loop <> v_tabtype_result_values.COUNT to
WHILE v_while_loop <= v_tabtype_result_values.LASTSY.

ORA-06502: PL/SQL: numeric or value error: NULL index table key value Repor

W've been experiencing the Oracle Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value Report’ [we are currently on apex v3.0.1]. From the forum there was a reference to a bug fix: apex bug (6416829) fixed in 3.1. When we view '6416829' in Metalink we can see the bug title but cannot see any details as it's protected. Can anyone shed some light on why it's protected or provide further details.
We have many LIVE customers reporting this error and we want to be certain it's fixed in v3.1.
(currently we are working around this by flushing the shared pool but this is not ideal).
Any help would be appreciated.

Scott,
This error has been thrown several times in the past 24 hours. Yesterday several of my reports threw the error, these reports have done so in the past. This morning APEX has begun throwing the error of which I have seen only once before. This is occuring at Home>Application>My Application. The error appears when I attempt to View the report in Details mode, is OK when I view the report in Icons mode. The error is occuring in my Prodution environment which has not been updated since 2/25/2009.
As before, I edited the SQL on my application's reports and the error then disappeared.
We are running Application Express 3.2.0.00.27 and Oracle Release 10.2.0.1.0. My browser is IE 7.0.
Plan to test later with FireFox provided I can download it to see if this might browser related.
Any inforamtion or guidance is appreciated.
Jeff

NULL index table key value

ORA-06502: PL/SQL: numeric or value error: NULL index table key value in Package OE_Order_PVT Procedure Lines
Where is the problem?
thanks
Edited by: huak on Feb 5, 2009 5:08 PM

thank you
My EBS is On 11.5.9 in Production, but Note: 433074.1 is based on 11.5.10.2 in Production.
AND I use the api with test windows to declare code in PL/SQL developer that is right. But I use api in the a package for a ebs' request that is error.
:(

ERROR ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found

Hi,
SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -ctf I C:/temp/51030721/EXP2/DATA/SAPSSRC.STR C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.TSK ORA -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195133
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: ABTREE created #20071018195134
(IMP) INFO: import of ABTREE completed (39 rows) #20071018195134
(DB) INFO: ABTREE~0 created #20071018195134
(DB) INFO: AKB_CHKCONF created #20071018195134
(IMP) INFO: import of AKB_CHKCONF completed (0 rows) #20071018195134
(DB) INFO: AKB_CHKCONF~0 created #20071018195134
(DB) INFO: AKB_INDX created #20071018195134
(IMP) INFO: import of AKB_INDX completed (0 rows) #20071018195134
(DB) INFO: AKB_INDX~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO2 created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO2 completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO2~0 created #20071018195134
(DB) INFO: APTREE created #20071018195134
(IMP) INFO: import of APTREE completed (388 rows) #20071018195134
(DB) INFO: APTREE~0 created #20071018195134
(DB) INFO: APTREE~001 created #20071018195134
(DB) INFO: APTREET created #20071018195134
(IMP) INFO: import of APTREET completed (272 rows) #20071018195134
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195134
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195314
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP INDEX "APTREET~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195315
I'm getting this error "duplicate keys found". I'm finished installing the central instance and during the database instance, i got this error. I'm installing BW 3.5 on x64 windows server 2003 platform. I'm using NU kernel 6.40.
Thanks for your suggestions on how to resolve this error.
Reward points guaranteed.

Issue solved by deleting central and database instance and started a new build. it finished without an error.
Thank you.

W_PARTY_D_U1 = ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found.

Hi,
We are implementing OBIA 11.1.1.7.1 which comes with ODI for Fianance and Procurement analytics.When we do full load from EBS the load plan gets failed and it throws the below error
Caused By: java.sql.SQLException: ORA-20000: Error creating Index/Constraint : W_PARTY_D_U1 => ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found.
Please help us to resolve the same.
Thanks
Rama

This might need Patch:10402735
if helps mark

Difference b/w index and key

can you please tell me the difference between the follwing UI elements
1.dropdownbykey and dropdownbyindex
2.radiobutton group by key and radio button group by index
and also tell me in which case which UI need to be used
Thanks
rahul

DropDownByKey
A DropDownByIndex UI element provides the user with a dropdown list box. You cannot select more than one entry from the selection list. The UI element consists of a text field, a button, and a selection list. Any list item already selected is displayed in the text field. When the user chooses the pushbutton, a list of all possible values is displayed.
DropDownByIndex
A DropDownByIndex UI element provides the user with a dropdown list box. You cannot select more than one entry from the selection list. The UI element consists of a text field, a button, and a selection list. Any list item already selected is displayed in the text field. When selecting the button, a list with all possible values is displayed.
http://help.sap.com/saphelp_nw04s/helpdata/en/d9/478041a17e060de10000000a1550b0/frameset.htm
In radiabutton we can have the only one decision.But
checkbox we can have mulitiple options.
based on the usage we choose these controls.
for example,
RadioButton
Gender - o Male o Female
here we can select only one option
for example,
CheckBox
your Interested Games?
o cricket o football o valleyball o hockey
here use may have more than option.
i hope this is enough.
award the point if ans is help full.

Difference Between Radio Button Group By Index and Key

what is main difference between RadioButtonGroupByIndex and RadioButtonGroupByKey ? And In which situvation we go for RBGBIndex and RBGBKey?

They do not differ from each other when displayed on the screen. However, the data binding model for the two UI elements is compeletely different. Index & Key Binding concepts are very elaborately explained in the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/f08841e3af1609e10000000a155106/frameset.htm">SAP Help</a>
~Suresh

Using a byte[] as a secondary index's key within the Collection's API

I am using JE 4.1.7 and its Collections API. Overall I am very satisfied with the ease of using JE within our applications. (I need to know more about maintenance, however!) My problem is that I wanted a secondary index with a byte[] key. The key contains the 16 bytes of an MD5 hash. However, while the code compiles without error when it runs JE tell me
Exception in thread "main" java.lang.IllegalArgumentException: ONE_TO_ONE and MANY_TO_ONE keys must not have an array or Collection type: example.MyRecord.hash
See test code below. I read the docs again and found that the only "complex" formats that are acceptable are String and BigInteger. For now I am using String instead of byte[] but I would much rather use the smaller byte[]. Is it possible to trick JE into using the byte[]? (Which we know it is using internally.)
-- Andrew
package example;
import com.sleepycat.je.Environment;
import com.sleepycat.je.EnvironmentConfig;
import com.sleepycat.persist.EntityStore;
import com.sleepycat.persist.PrimaryIndex;
import com.sleepycat.persist.SecondaryIndex;
import com.sleepycat.persist.StoreConfig;
import com.sleepycat.persist.model.Entity;
import com.sleepycat.persist.model.PrimaryKey;
import com.sleepycat.persist.model.Relationship;
import com.sleepycat.persist.model.SecondaryKey;
import java.io.File;
@Entity
public class MyRecord {
@PrimaryKey
private long id;
@SecondaryKey(relate = Relationship.ONE_TO_ONE, name = "byHash")
private byte[] hash;
public static MyRecord create(long id, byte[] hash) {
MyRecord r = new MyRecord();
r.id = id;
r.hash = hash;
return r;
public long getId() {
return id;
public byte[] getHash() {
return hash;
public static void main( String[] args ) throws Exception {
File directory = new File( args[0] );
EnvironmentConfig environmentConfig = new EnvironmentConfig();
environmentConfig.setTransactional(false);
environmentConfig.setAllowCreate(true);
environmentConfig.setReadOnly(false);
StoreConfig storeConfig = new StoreConfig();
storeConfig.setTransactional(false);
storeConfig.setAllowCreate(true);
storeConfig.setReadOnly(false);
Environment environment = new Environment(directory, environmentConfig);
EntityStore myRecordEntityStore = new EntityStore(environment, "my-record", storeConfig);
PrimaryIndex<Long, MyRecord> idToMyRecordIndex = myRecordEntityStore.getPrimaryIndex(Long.class, MyRecord.class);
SecondaryIndex<byte[], Long, MyRecord> hashToMyRecordIndex = myRecordEntityStore.getSecondaryIndex(idToMyRecordIndex, byte[].class, "byHash");
// END

We have highly variable length data that we wish to use as keys. To avoid massive index sizes and slow key lookup we are using MD5 hashes (or something more collision resistant should we need it). (Note that I am making assumptions about key size and its relation to index size that may well inaccurate.)Thanks for explaining, that makes sense.
It would be the whole field. (I did consider using my own key data design using the @Persistent and @KeyField annotations to place the MD5 hash into two longs. I abandoned that effort because I assumed (again) that lookup with a custom key design would slower than the built-in String key implementation.)A composite key class with several long or int fields will not be slower than a single String field, and will probably result in a smaller key since the UTF-8 encoding is avoided. Since the byte array is fixed size (I didn't realize that earlier), this is the best approach.
--mark

Subject: Drop Down By index Vs Key

Question: I have domain with Fixed value and i want the drop down in webdynpro screen to pick the domain value automatically
what type of drop down should be used and can you differentiate the two types
kindly reply

Hi,
You should use drop down by key in order to select the domain value automatically.
Map your contxt attribute as a selected key property of the UI element property.
Diff. b/w the two avalable types:
For drop Down by index, You need to build the value table to the node intially and an intial value will be space by default.
For drop Down by key: you have val-nam pair i.e if you can decide to display domain value or description.
Hope this may be helpful.
Thank you
Depeshl

Error while renaming indexes and keys in the tables

hi gems...good afternoon..
i am using oracle 11gr2 database.
when i am trying to rename the primary key, foreign key, indexes of all the tables as per the standard, then the following error is given...
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
currently the maximum open cursors parameter is set to 300.
please help..thanks in advance

thanks a lot for your help..
there are total 162 records in the v$open_cursor for that user.
among that the open cursor is only 4 and open-recursive cursor is only 6 for that user.
in my session i am executing only the renaming of the constraints and nothing more.
When i have queried the v$open_cursor for cursor_type='OPEN' for all the users, then i got that it has exceeded the value of open_cursors parameter.
So how can i resolve that....

Sort a table with no index or key defined?

Greetz!
I've got a script that builds a table, table A, by doing a select into. Later, a select is done on that table and an order by added. However the sort order is not persisting. Could this be due to there being no indexes or primary keys defined
on table A? Can a sort be done on a table without an index of any kind?
Thanks!
Love them all...regardless. - Buddha

To add to Erland's comment
You cannot "look" directly at the contents of a table - you must use a query to generate a resultset. And a resultset, just like a table, has no defined order unless it was generated using an order by clause. Any order you might observe
is simply an artifact of your data, the load on the db engine, the currently cached data, and many other factors. If you see a consistent order, you might be tempted to assume such an order will always exist. Don't be tempted. Many others
have been so tempted and have discovered the incorrectness of this assumption at a later date - often at an inconvenient time.

Dimension table, indexing business key

Hi.
I my dimension table business key is Unique key constraint and business key is also a index key (unique).
My question is why is important for dimension to have index?
In my mapping I first load data into dimension and to merge data I use business key. Ok, business key is unique so I'm merging by constraint (UK).
I have a fact table mapping where I use previous dimension for lookup, and I do lookup by a business key.
I understand why we have index in fact tables, but in dimension?
When and why does business key index help me?

Hi,
There are many reasons why we use indexex on dimensions.
1) The source key or natural key may or may not be a unique one in case of SCD2 and hence its faster to look up w.r.t the index key rather than the source key.
2) It is not a good idea to have all the source keys from ur dimensions in ur fact. We have to have the index keys anyway to speed up the process of quering.
3) The index key is always unique and so u will always land on only 1 record on any look up
Regards
Bharath

Index on Key

Similar Messages

Maybe you are looking for