Indexes not Re-Indexing after Restart

I have four indexes set up for TREX. They have all worked fine until yesterday. We rebooted the system and are now unable to re-index. I have flushed the Queue, tried manually reindexing but they all say pending and nothing is happening. Sometimes the green icon turns yellow and says "no crawler has been started" but then turns green again...
Any ideas? Also logs are showing no activity and no errors. Everything says 0.

Dear
Is there any Version updation in your TREX ?
provide information like IIS , Trex-version , OS , and 32 / 64 bit. ???
Kindly check in Indexing Monitor and please provide some more information on this (any errorcode)??
Check Crawler Parameters (System Admin->System Config->Content Management-->Global Services>Crawler Parameters-->Standard) and see that the test mode is not active, if it is active kindly uncheck it and try.
Regards
Tushar Dave

Similar Messages

Firefox 11.0 Personas are not staying enabled after restart of FF11

After updating Firefox 10.0.2 to FF 11.0, both of my PC's personas that I have will not stay enabled after restarting FF 11.0. I have tried different personas on each PC and they also will not stay enabled after a restart of the browser. FYI, I am still using the same extensions that I had used in FF 10.0.2 and there all up to date in FF 11.0, it's just this persona issue that bug me big time.
I've tried all the Knowledge Base help suggestions, but none have worked.
Any one else having this issue? Any on have a fix that worked?
Help!

The installed personas and the currently selected persona is saved as a pref in the prefs.js file in the Firefox Profile Folder, so there may be a problem with that file.
See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

My MBP will not start up after restart

My MBP (late 2011 running 10.8.something - receintly updated) will not start up after I had to do a restart to install Blackberry Desktop software (for my wife, I promise). It chimes, gets past the grey screen with the Apple logo and then just sits on the login screen but with the background only, no account or anything. My mouse pointer is there and moves but nothing else. Anyone have any idea?

Reboot holding the Shift key down on a wired or built in keyboard, this is Safe Mode and will disable the at boot kernel extension file that Blackberry installed.
When you get in uninstall the software using their uninstaller. Then reboot normally again, visit their website for a update if there is one.
Blackberry/RIM software has been causing issues around here lately.
If your machine refuses to boot normally again, then run through this list 1-8,, by #8 your machine should be booting normally again.
Step by Step to fix your Mac

USB Hard Drive not mounting til after restart

This weekend I put a new internal hdd in my Power Mac G5, and decided to use this opportunity to go ahead and put Leopard on one of my macs.
I'm finding that it doesn't mount some my USB External Hard Drives (3.5" externaly powered cases) unless I plug them in, and then restart the computer. (It also works just starting up if the G5 is off.) The drive needs to be turned on before the start up.
This is the case with an older IDE->USB 5 inch case, a brand new sata->USB 3.5 case (with the former g5 drive inside, and a sata->usb newertech bridge on the g5 drive. A bus powered 2.5" one mounted fine without the restart. I have not tried any flash drives.
I've tried the different USB ports on the G5 with no difference. I have not tried plugging it into a hub that's pre-connected (either powered or non).
They don't show up in Disk Utility during the time they don't mount. They do after the plugged-in restart, though. They also unmount then remount fine after the plugged in-restart.
The drives work just fine on my MBP (running Tiger). They worked just fine before the Leopard upgrade. If I boot into the Tiger partition on the G5, they work just fine.
I've seen references to other people having what sounds sort of like this problem in google searches but nothing exact, and those threads seem to get sidetracked with useless comments (like "Well, you should just use Firewire!" etc).
Has anyone experience this...and moreover, anyone found a fix.

Two things to check:
The drive must be formatted in Mac OS Extended (Journaled) or FAT 32
You almost always have to use a powered USB hub with the under powered port on the Time Capsule, even if the hard drive has its own power supply
Where are you expecting the drive to "show up"?

JMS Queue is not accepting requests after restarting the weblogic server

Hi,
JMS queue is able to receive message after redeploying the application or restarting the weblogic server. It is intermittent , not happening every time.
Please suggest how to resolve this issue. do we missed any configuration settings we are missing at clinet side or server side.
we are using Weblogic 92 MP2 version.
thanks.
[email protected]

I assume you meant "is unable to receive messages".
Are you getting any exceptions in the code, or errors in the log, or is nothing happening when you know there's a message on the queue to be read?
Are you perhaps reading from a distributed destination?

SAP JAVA system not coming up after restart

Hello SAP experts,
I have a following enviorment
SAP WAS JAVA only
OS:- solaris
DB;- 9207
Kernel:= 640
I had a daily schedule restart of the system.
But after shutting down the system is not coming up and also i chekeced the logs it was related to R3trans.
the R3trans -d log is as seen below:-
Line:-----
"trans.log" [Read only] 44 lines, 4056 characters
4 ETW000 R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 24.06.2009 - 13:04:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Wed Jun 24 13:04:46 2009                             733 0.000733
4 ETW000 [dev trc     ,00000] db_con_init called                                    66 0.000799
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                            316 0.001115
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/DC2/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                             206 0.001321
4 ETW000 [dev trc     ,00000] Wed Jun 24 13:04:47 2009                           92178 0.093499
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/DC2/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                             283 0.093782
4 ETW000 [dev trc     ,00000] Library '/usr/sap/DC2/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                              88 0.093870
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000                                                                             110 0.093980
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/DC2/SYS/exe/run/dboraslib.so' is "640.00", patchlevel (0.55)
4 ETW000                                                                             520 0.094500
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000                                                                              94 0.094594
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/DC2/SYS/exe/run/dboraslib.so
4 ETW000                                                                             266 0.094860
4 ETW000 [dev trc     ,00000] New connection 0 created                              98 0.094958
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                             112 0.095070
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                        147 0.095217
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              88 0.095305
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              92 0.095397
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/DC2/920_64 from environment
4 ETW000                                                                            1837 0.097234
4 ETW000 [dev trc     ,00000] -->oci_init1                                         123 0.097357
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         73 0.097430
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
4 ETW000                                                                            9213 0.106643
4 ETW000 [dblink      ,00419] ***LOG BY2=>sql error -1     performing CON [dblink#2 @ 419]
:$
4 ETW000                                                                             266 0.094860
4 ETW000 [dev trc     ,00000] New connection 0 created                              98 0.094958
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                             112 0.095070
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                        147 0.095217
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              88 0.095305
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              92 0.095397
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/DC2/920_64 from environment
4 ETW000                                                                            1837 0.097234
4 ETW000 [dev trc     ,00000] -->oci_init1                                         123 0.097357
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         73 0.097430
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
4 ETW000                                                                            9213 0.106643
4 ETW000 [dblink      ,00419] ***LOG BY2=>sql error -1     performing CON [dblink#2 @ 419]
4 ETW000                                                                             356 0.106999
4 ETW000 [dblink      ,00419] ***LOG BY0=>'OCI_ERROR' [dblink#2 @ 419]              61 0.107060
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'DC2'"
~
Line:-----
So i changed the NLS parameter from
Old value:-ORA_NLS33=/oracle/DC2/920_64/ocommon/nls/admin/data
New value:- ORA_NLS33/oracle/client/92x_64/ocommon/nls/admin/data
Now R3trans -x worked fine but R3trans -d is not working well its giving the following utput
6% R3trans -d
This is R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
R3trans finished (0012).
nus650pa:dc2adm 7% R3trans -x
This is R3trans version 6.09 (release 640 - 13.01.05 - 10:38:00).
unicode enabled version
R3trans finished (0000).
So please help me out for the same.
Apreciating your valuable help.
Thanks and Regards,
Ramkrishna

Hello Markus and Mr. Joshi,
The problem has been solved now.
And the analysis of the logs was not much helpful as the dev_jcontrol, dev_dispatcher and other std_* logs were only saying about the shutdown operation.
so i was trying to solve the issue old ways so tried the R3trans as such the client has not upgraded the kernel for pretty long time , but after much research i found out that there was a oracle client updated on the same server.
so i changed the NLS33 parameter and also added the old client path in LD_LIBRARY_PATH.
It worked fine and the portal is up and running.
Thanks for the advice and help guys.
Regards,
Ramkrishna

Region templates not refreshed until after restart

Hi guys,
Another problem we are facing is when updating region templates. On a local workstation with JDev and a local SSXA connected to a remote UCM, changes to the region template's underlying JSP are taken into account on every page load. However, when using the remote SSXA connected to the same remote UCM, changes to the region template are not taken into account until the SSXA server is restarted.
Surely there must be some caching parameter somewhere? How can we modify this behaviour?
Thanks again!

Hi ,
Download 13502977 from MyOracleSupport and upgrade the UCM server .
After that install the JDev plugins from the upgraded server by navigating to :
/Oracle_ECM1/ucm/Distribution/RIDC/jdev
/Oracle_ECM1/ucm/Distribution/SiteStudioExternalApplications/jdev
After this test to see if the issue still persists .
Reason for asking this is I am not able to see any issues with SSXA region templates .
Hope it helps .
Thanks
Srinath

How can I get WebAS to not start-up after restarting Windows?

I would like to not have my WebAS auto start after I reboot windows.
I found of couple of options in Configuration tool but they did not stop it.
We have a firewall product that I cannot disable (per security policy), but I can terminate it once I get the desktop. However by that time WebAS has started and encounters blocks from firewall, and once this happens, half the time it causes my jcontrol.exe to result in NIETIMEOUT messages and once THAT happens I have to uninstall and reinstall EVERYTHING.
So, how can I configure WebAS to not automatically start-up after rebooting windows? I have searched help.sap.com and looked for options in Visual Admin and Configure tools.

Easier than it seems
Go to Administrative Tools/ Services in Windows.
Change Startup type of the services to Manual.
You can just sort by the 'Log On As' Column
".\SAPServiceJ2E"
or whatever you instance name is. You can always start the service from the MMC console after this.

IFS Queue Items Not Being Processed After Restarting BPEL PM

This issues mentioned in the CS custom workflow development guide, but the solution mentioned(restarting BPEL PM) does not work.
If I have to restart the process manager, and I have restarted it several times due to outofmemory errors, the queue just continues to build in the IFSQUEUE and none of the custom workflow requests are processed.
The only workaround I have found is to redeploy each custom workflow. This is obviously unacceptable in a production environment.
Anyone have any ideas?

Can you please provide more details of the OutofMemory Errors that you see in BPEL ? This is more of a AQ adapter problem than anything else. The log file to track the information would be under $ORACLE_HOME/integration/orabpel/domains/default/logs [where ORACLE_HOME is that of BPEL PM installation]. You can increase the log level of all the components from BPELConsole. Click on the Manage BPEL Domain -->Logging and update the logging level to debug.
Hope this helps,
Ravikiran.

Taskbar does not stay locked after restart

Hi,
I have been having this issue for a while now. I have a dual monitor setup, and I move my taskbar the the 2nd screen and lock it in place. However after every startup/reboot it defaults back to my 1st monitor. The same issue occurs when I un-tick the "Touch
Keyboard" option, it just resets after startup. Any help :(?
Thanks in advance.

Hi,
Third party application could cause this issue, in my environment, I can lock all taskbars, and it would stay on the personal defined position after a restart:
So I would suggest you uninstall this application and re-check it.
Alex Zhao
TechNet Community Support

Temporary Tablespace not shrinking automatically after restarting the DB.

I had a Database with 2GB tempfile. It gave me an error that it's unable to extend the temporary segment. I added a new tempfile of 500MB. Within a few min the new file was filled. In process of shrinking the temporary files, I shutdown the DB, and restarted it. But the Tempfiles were still filled to the max. I still don't understand why? Then I attached a new tempfile of 1GB to the Temp Tablespace, but it didn't use the new tempfile. I repeated the restart process again but still the output was same.
1. Both datafiles were filled to the max
2. It didn't use the new (3rd) attached tempfile.
Finally I've created a new tablespace with new Tempfiles, and it's working now. But I'm still confused. Please suggest me with the possibilities. How can i shrink the Temporary Tablespace/Tempfiles.
Thanks & Regards
Vikas Verma
Manager (IT) / Sr. DBA
Hero Cycle Group,
India

It all depends from what you understand by shrinking:
If you would like to shrink tempfile for tablespace I would suggest using following procedure:
Find out to which size you can shrink tempfile
select extent_size,current_users,total_extents,used_extents,free_extents
from v$sort_segment
where tablespace_name='TEMP';
alter database tempfile 'XXXX' resize YYM;
YY is the size which can be found by above query.
But Ithink you are more interested in following procedure:
create new
make this new one the default temporary tablespace for the database
drop old
ps. Yoogesh ask you about DB version
you can find bd version by:
select *
from v$version
select *
from product_component_version
Best Regards
Krystian Zieja / mob

I looded a toolbar but it does not show up after restarting firefox

I loaded Zinga Toolbar 2.7.1.3 and it shows up in add-ons but it does not load on my page. I am running Firefox 3.6.12 with windows 7, 64 bit
and Microsoft Security Essentials

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check
You may also need to "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
* http://kb.mozillazine.org/Resetting_preferences

Can't select boot disk after restart from Windows 7

I installed Windows 7 RC 7100 on the Mini a while ago and it is working now using the Apple drivers and an updated chipset driver from Nvidia... except:
When I restart the machine from OS X and hold the Option key I get the disk selection screen and I can boot into either OS. But, when I restart the machine from Windows 7 and hold the option key I do not get the disk selection screen and the machine boots into OS X. I have also encountered issues with the Bluetooth keyboard not being recognized after restarting from Windows 7, but this does not happen consistently and seems to occur mainly when I hold down the Option key.
Any suggestions for a fix, tweak or workaround? Thanks.

Are you using a wired keyboard?
Are yo saying that when you boot while depressing ALT it just tries to boot to Windows with not options or anything showing on the screen
Try another keyboard

File adapter: file_name with counter, stable after restart J2EE

Hello guys,
we are on XI 7.0.
in a receiver file channel we have to create file names with a stable counter (7digits).
The payload is IDOC flat file after ABAP mapping (not XML format).
The bad thing with the counter is that it is not stable. After restart of J2EE engine the counter starts again more or less
from the beginning (also described in a FAQ OSS note).
Does anybody have an idea how we could realize a stable counter for file names that also increases the counter after restart of J2EE. Is individual programming necessary? module ?
We thought about SAP number ranges (DB) but how to integrate this in the file channel. Also generating the the number in ERP and send it in the IDOC to XI, but after the ABAP mapping to IDOC flat file we cannot use the payload for variable replacement.
Every help is appreciated
best regards
Hans

Hello Georg,
You can achieve this by developing a Customized adapter module,
Try to maintain the counter in one of the temporary file in the XI system, read the counter number from the temporary file and increment the counter by 1.
rename the receiver filename with the sufix as counter.
replace the counter number in the temporary file with the latest counter number i.e increment by '1'.
regards,
Chandra Shekhar

Spotlight starts indexing after every restart and there is a scrolling delay with both mouse and track pad.

I had to restart my MBP three time, two after it crashed. Every time Spotlight starts to index the content on my Mac
which takes two hour. Then there is a delay when I start scrolling, both with the mouse and with the track pad.
I also notised that after changing the icons with Candybar they still appear unchanged in Launchpad, which makes
it confusing. Launchpad isn't consitent when putting the apps in aphabetic order, but jumble up some of the apps.
i don't get back the wab sites after restart as i was to believe I would.
As Jobs sez; And more thing.
Well one more might OK, there are more bugs then that, but I to tired to tell them all.
I have never found so many bug in such a short time (only in two hours with Lion now) with any other OS and I have worked with Macs since -91.
God help us.

Hi, me again, more data.
I have found that some plugins are accessing the internet without my permission.
And when I went into the plug in menu via the addons options through the Tool Menu option, I found the plug ins there.
BUT I never installed those plugins, and now they are there and they are accessing the Internet. Here are two images to show the plug ins disabled and yet another image showing them still accessing the Internet even when disabled.
I then removed them from the system (I did back them up first, just in case).

Indexes not Re-Indexing after Restart

Similar Messages

Maybe you are looking for