India umlimited calling plan is not working for me...

hi,
Since one year i am using india unlimited calling plan but from past 2 months i am not able to activate or purchase...i dont want the remaining plans...please help me out in activating the unlimited india plan..you even can check my last year subscriptions also...please reply me as early as possible...
Regards,
Praveen

Hello,
The "Unlimited World Subscription" is working normally for calls to/within all countries (including India) at this time. Please expain your issue in detail including error message(s) received.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

  • SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

    H/W: SPA3000
    F/W: 3.1.20(GW)
    Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
    Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
    Dial "17474743246#" which works for gw1.
    Dial "#17474743246" which also works for gw1.
    Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
    It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
    Is there any way to specify Interdigit Short Timer with <:@gw0>?
    BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
    S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
    The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

    IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
    I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Project Plan icon not working

    The little icon found on the left that allows you to access your project plan is not working for one of my project managers, who is the owner of that specific project. However in the Admin's view they are able to access it by clicking that button.
    Any thoughts why?

    Hi EPM Admin,
    The issue occurs only for 1 PM? Is the icon working for this PM with another view? Can the PM try on another machine? When you say that it doesn't work, do you have any error message or just nothing happens? Have you tried refreshing IE deleting the cache
    (press CTRL F5)?
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

    i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

    Hey lilmissindian!
    I have an article for you here that will help you troubleshoot this issue:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • 1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

    Hi. please solve my problem.
    .call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
    thank you in advance.

    Hi Ersin,
    Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform.  However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module.  I can think of no reason why the different calling method would be a factor.
    When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
    Regards,
    Nick

  • Half Day LOP / Unpaid Absence not working for payroll india

    Dear Gurus,
    I have created Unpaid leave which is working correctly when we maintain full day absence in infotype 2001.
    But it is not working for partial absence ie, half day.
    I would really appreciate if you help me out on this issue.
    Thanks,
    Rajesh Badita

    Dear Venkey / Rajesh,
    My issue is resolved. We have tried with Custom PCR which will convert absence days into hours. With this we are able to achieve the desired result.
    Copied from standard PCR "INP1" to "ZNP1" and modified "/801 partial period factor 1" logic. Below is the PCR for your kind reference.
    RTE=TKSOLL
    RTE*8
    RTE-TSAU**
    RTE/8
    RTE*KGENAU
    RTE/TKDIVI
    ADDWT *
    Kindly go through the below link which is very useful. Hence closing the thread. Thanks for your valuable inputs.
    http://wiki.sdn.sap.com/wiki/display/sandbox/PCRmodificationincaseofHalfdayUnpaidLeave(LOP),IndiaPayroll
    Thanks & Regards,
    Rajesh Badita
    Edited by: Rajesh Badita - ABAP HR on Oct 13, 2011 7:05 AM
    Edited by: Rajesh Badita - ABAP HR on Oct 13, 2011 7:08 AM

  • Call Forwarding Number Not Working

    Hi I have just purchased a skype phone number in Australia  for 3 months and have redirected my calls to a number in the Philippines whilst I am on holidays. When I ring this number (Australia Skype number)  it isnt being diverted to my Philippine phone number. I have added the number and whenever I return to tab the details for Call Forwarding are being erased. Advice appreciated as I am not receiving calls on mobile.

    I am also facing this same problem of Call forwarding no. not working , I am having a Hong Kong Phone skype no. and have diverted to my India no. however when some body calls me on my HK no. the no. is not connected. I am covered with all the subscriptions required for call transfer , Please suggest urgently as i am loosing on reciving calls from all my impotant no.
    hellp reply asap .

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

  • Thunderbird Mission Control Desktop/AutoConfig not working for some users

    I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
    It contains:
    pref("general.config.obscure_value", 0);
    pref("general.config.filename", "TMcustom.cfg");
    I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
    It contains:
    var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
    .getService(Components.interfaces.nsIPromptService);
    promptService.alert(null, "title", "testing");
    For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

    As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
    Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

  • Auto_lexer (stemming) not working for other languages(other than english)

    Hi All,
    We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
    But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
    Following is the code for AUTO_LEXER creation:
    CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
    lang_index VARCHAR2(3),
    content_text CLOB,
    CONSTRAINT test_auto_lexer_pk primary key (pkey))
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (1,'eng','I drive a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (2,'eng','I drove a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (3,'eng','I have driven a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (4,'eng','Just check for other things')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (5,'eng','always drive a car')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (6,'eng','it is nothing')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (7,'ger','Ich fahre ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (8,'ger','Ich fuhr ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (11,'ger','immer Auto fahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (12,'ger','es ist nichts')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (13,'ger','sprechen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (14,'ger','sprach')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (15,'ger','gesprochen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (16,'ger','tale')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (17,'ger','Indlæg')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (18,'ger','tales')
    BEGIN
    ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
    END;
    CREATE INDEX test_auto_lexer_ix1
    ON test_auto_lexer(content_text)
    INDEXTYPE IS ctxsys.context
    PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
    select to_char(content_Text) from test_auto_lexer where contains(content_text,
    '<query>
    <textquery lang="ger" grammar="context">
    $fahren
    </textquery>
    <score datatype="integer"/>
    </query>') > 0
    this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
    Could any one help me with this, in case I am missing something here. I would be really thankful.
    Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

    In the future, please begin a new thread for a new question and provide a link to a related question.
    According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
    Basic_lexer attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
    Basic_wordlist attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
    Also, please see the following note:
    Features not available in 11.2.0.3:
    http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
    "Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
    Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
    I don't work for Oracle, so I don't know why they do things the way they do.
    So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
    -- demo:
    SCOTT@orcl_11gR2> select * from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl_11gR2> select value from v$nls_parameters
      2  where  parameter = 'NLS_CHARACTERSET'
      3  /
    VALUE
    AL32UTF8
    1 row selected.
    SCOTT@orcl_11gR2> DROP TABLE news
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> CREATE TABLE news
      2    (pkey            NUMBER,
      3       lang            VARCHAR2 (2),
      4       short_content  CLOB)
      5  /
    Table created.
    SCOTT@orcl_11gR2> INSERT ALL
      2  INTO news (pkey, lang, short_content)
      3    VALUES  (1, 'en', 'I drive a bike.')
      4  INTO news (pkey, lang, short_content)
      5    VALUES  (2, 'en', 'I drove a bike.')
      6  INTO news (pkey, lang, short_content)
      7    VALUES  (3, 'en', 'I have driven a bike.')
      8  INTO news (pkey, lang, short_content)
      9    VALUES  (4, 'en', 'I always drive a car')
    10  INTO news (pkey, lang, short_content)
    11    VALUES  (5, 'en', 'This is nothing')
    12  INTO news (pkey, lang, short_content)
    13    VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    14  INTO news (pkey, lang, short_content)
    15    VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    16  INTO news (pkey, lang, short_content)
    17    VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    18  INTO news (pkey, lang, short_content)
    19    VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    20  INTO news (pkey, lang, short_content)
    21    VALUES  (10, 'de', 'Es ist nichts.')
    22  SELECT * FROM DUAL
    23  /
    10 rows created.
    SCOTT@orcl_11gR2> BEGIN
      2    -- word list:
      3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
      5    -- english lexer:
      6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      7    -- german lexer:
      8    ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      9    ctx_ddl.set_attribute      ('german_lexer',  'composite',       'german');
    10    ctx_ddl.set_attribute      ('german_lexer',  'alternate_spelling', 'german');
    11    ctx_ddl.set_attribute      ('german_lexer',  'mixed_case',       'no');
    12    ctx_ddl.set_attribute      ('german_lexer',  'base_letter',       'yes');
    13    -- multi_lexer:
    14    ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
    15    ctx_ddl.add_sub_lexer      ('global_lexer',  'default',            'english_lexer');
    16    ctx_ddl.add_sub_lexer      ('global_lexer',  'german',            'german_lexer');
    17  END;
    18  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index search_news
      2  on news (short_content)
      3  indextype is ctxsys.context
      4  parameters
      5    ('lexer            global_lexer
      6        language column  lang
      7        wordlist       my_wordlist')
      8  /
    Index created.
    SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
      2  /
    Session altered.
    SCOTT@orcl_11gR2> set timing on
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drive') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drove') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
      2  /
    Session altered.
    Elapsed: 00:00:00.01
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fahr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.07
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fuhr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
    select * from v$version
    select value from v$nls_parameters
    where  parameter = 'NLS_CHARACTERSET'
    DROP TABLE news
    EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    CREATE TABLE news
      (pkey           NUMBER,
       lang           VARCHAR2 (2),
       short_content  CLOB)
    INSERT ALL
    INTO news (pkey, lang, short_content)
      VALUES  (1, 'en', 'I drive a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (2, 'en', 'I drove a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (3, 'en', 'I have driven a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (4, 'en', 'I always drive a car')
    INTO news (pkey, lang, short_content)
      VALUES  (5, 'en', 'This is nothing')
    INTO news (pkey, lang, short_content)
      VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (10, 'de', 'Es ist nichts.')
    SELECT * FROM DUAL
    BEGIN
      -- word list:
      ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
      -- english lexer:
      ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      -- german lexer:
      ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      ctx_ddl.set_attribute     ('german_lexer',  'composite',          'german');
      ctx_ddl.set_attribute     ('german_lexer',  'alternate_spelling', 'german');
      ctx_ddl.set_attribute     ('german_lexer',  'mixed_case',          'no');
      ctx_ddl.set_attribute     ('german_lexer',  'base_letter',         'yes');
      -- multi_lexer:
      ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'default',             'english_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'german',              'german_lexer');
    END;
    create index search_news
    on news (short_content)
    indextype is ctxsys.context
    parameters
      ('lexer            global_lexer
        language column  lang
        wordlist         my_wordlist')
    EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    COLUMN short_content FORMAT A30
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
    set timing on
    select * from news
    where  contains (short_content, '$drive') > 0
    select * from news
    where  contains (short_content, '$drove') > 0
    ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
    select * from news
    where  contains (short_content, '$fahr') > 0
    select * from news
    where  contains (short_content, '$fuhr') > 0
    /

  • Reg: FM - DATE_CONVERT_TO_FACTORYDATE not working for 2011

    Hi All,
    The FM - DATE_CONVERT_TO_FACTORYDATE was working correctly so long.
    This FM is not working for the year 2011 alone!!
    When i check the FM, it is actually a C module which is called and is not allowed for debugging.
    Can anyone help as to what could be the problem. Will some customizing solve the issue?
    Kindly help.
    Also let me know if there is an alternative FM for this DATE_CONVERT_TO_FACTORYDATE.
    Thanks in advance.
    Regards
    Shanthi

    Hi Shanti,
    see SAP Note 1529649: Factory Calendar expires 2010
    kind regards
    Paul Q

  • Why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

    why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

    Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
    Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
    sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
    count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
    PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
         DIM i,Total AS INTEGER
         Total = 0
         FOR i = 0 to UBOUND(LookupArray)
               Total = Total + CINT(LookupArray(i))
         NEXT i
     NumberTimes  =   NumberTimes +1
    RETURN  Total
    END FUNCTION

  • Skype is not working for almost a week in parts of...

    Our skype is not working for almost a week nnow in some parts of Ghana

    My friend and I have also been experiencing the same connectivity issues here in Ghana for about a week now. I am from the US and have had an account for several years.  I have been using my account here in Ghana for over 6 months and had no issues up until last Thursday when Skype wouldn't connect. I am working on Mac OS 10.8.2 and I've tried everything from uninstalling/reinstalling Skype to creating a new account altogether, none of which are working. My friend who works on a PC has also experienced the same problem in the past week.
    I entreat the Skype technical folks to find a quick fix as it is very frustrating to not be able to communicate with our friends and family. If anything, a courtesy email would have been appreciated if you were planning to cut off our service so that we wouldn't waste time trying to figure out the problem. 

  • Clob is not working for bulk data files in PL/SQL XML program

    Hi Odie,
    we took your help to fix the our issue before
    "https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
    working fine for : program is working for smaller size data.
    Issue : now we have problem with the largr size data .
    getting the below error:
    Arguments
    P_dir_name='/tmp'
    P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
    Environment will now switch to UTF-8 code-set.
    Parts of this log file may not display correctly
    as a result. This is an expected behavior.
    XML_REPORTS_XENVIRONMENT is :
    /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    stat_low = 8B
    stat_high = 0
    emsg:was terminated by signal 11
    Appreciated for your earlier support.
    Kindly suggest .
    Many Thanks,
    Ramesh.

    Thanks ALex,
    your are true it is concurrent program error ,
    but it is working for small amount of data and generating the output and it is not working for larger data.
    i have placed the code which i have used kindly suggest where i am going wrong.
    i am calling the .rdf through the concurrent program, i've used the below query in RDF
    select
    BATCHHEADER
    ,BATCHTRAILER
    ,RqUID
    ,Severity
    ,PmtRefId
    ,StatusDesc
    ,ErrorDesc
    ,AsOfDate
    ,AsOfTime
    ,RqUID1
    ,SPRefId
    from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
    kindly find the below code for the package CL_CXFRFXFH_PKG.
    ==========================
    CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
    function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
    return TRecordTable pipelined
    is
    nb_rec number := 1;
    tmp_xml clob;
    tmp_file clob;
    rec TRecord;
    begin
    dbms_lob.createtemporary(tmp_file, true);
    tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
    rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
    rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
    loop
    tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
    exit when length(tmp_xml) = 0;
    --dbms_output.put_line(tmp_rec);
    nb_rec := nb_rec + 1;
    select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
    into rec.RqUID
    , rec.Severity
    , rec.PmtRefId
    , rec.StatusDesc
    , rec.ErrorDesc
    , rec.AsOfDate
    , rec.AsOfTime
    , rec.RqUID1
    , rec.SPRefId
    from xmltable(
    '/CMA/BankSvcRq' passing xmltype(tmp_xml)
    columns RqUID varchar2(3000) path 'RqUID'
    , Severity varchar2(3000) path 'XferAddRs/Status/Severity'
    , PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
    , StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
    , ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
    , AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
    , AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
    , RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
    , SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
    pipe row ( rec );
    end loop;
    dbms_lob.freetemporary(tmp_file);
    return;
    end;
    end;
    ============================================
    Many Thanks,
    Ramesh.

Maybe you are looking for