Infinity extension - What wires go where for RJ11 ...

Hi all,
I had the engineer over today to install Infinity. Everything working good and he left me some CAT5 and an extension box as I want to extend the line to different part of the flat at a later date. However, I fancied doing it now but am having some issues getting the extension to work. I've followed the engineer's instructions which were:
Faceplate off and CAT5 single strand into 2 and 5 on the extension point (orange in 2 and orange/white in 5)
Now I cant' seem to figure out where the orange/white etc goes on the extension box - does it go into 4 and 5? This will be for an RJ11 connectotr o the homehub.
Here is the extension box:
Any ideas?
Many thanks!
Solved!
Go to Solution.

woobl wrote:
Figured out what was the issue - I was going into the phone line extension conections - not the DSL connections that were on the other part of the faceplate!
Yep thats what I was trying to say. 2 and 5 is for the phone line. Not the dsl, unless its not filtered.

Similar Messages

Developing Extensions: what is "configArchive.properties" for?

Hi,
I developed my own Extension, based on the example given in the Extension-Developer-Guide ("SimpleExtension").
My own Extension is working, but I'm not sure, what the files "configArchive.properties" and "SimpleExtension.prjconfig.configarchive" are used for.
Obviously the later is specific for the Extension, but my Extension is running, even it has a different name ("ZRoomExtension") and I did not customize the two files.
I tried to just delete them (ok, probably not the smartest idea...), but then my project would not deploy (even though I got no error message here).
I did not find anything about these files in the Extension-Developer-Guide. Can anyone give me a clue what these files are used for?
Thank You very much, rehards
Jan Hempel

Hi Jan,
the configArchive.properties are used when a configArchive is deployed to determine on what things the configuration is dependent (I don't know the exact mechanism, but this shouldn't matter, as it is built by NWDS and there is no need to touch it afterwards).
The configArchive itself is different. It reflects a configuration and instances of this configuration. You can open the file (it's a ZIP) - and you'll see the files zipped you'll also find under src.config.
In the case of extensions, only an instance of an already configured configuration is defined. After deployment, you'll see the configuration instance under System Admin - System Config - KM - Coll - Extension - Extension.
Hope it helps
Detlev

What files go where for OA Framework customizations?

I'm attempting to create a project to customize an iprocurement page. I've read the OA Framework documentation (Developers guide, tutorial) as well as going through the tutorials for extending the toolbox. I find no reference to setting up the jDeveloper environment for extending REAL applications.
I have attempted to zip the $JAVA_TOP/oracle/apps/icx/* xml and class files and restore them onto <JDEV_HOME>\myclasses\oracle\apps\icx...
I've also zipped and restored $ICX_TOP/mds/*.xml to <JDEV_HOME>\myprojects\oracle\apps\icx....
This is an 11.5.10.2CU instance, upgraded from 11.5.9
I've even tried putting all the files into \myprojects and \myclasses to see if that would help.
In any case, I'm unable to open the server.xml files in various packages within the files - I get 'unable to load referenced file ' errors on various files that are actually there.
Could somebody give me a little guidance in setting up my environment for doing customizations to iprocurement/ ssw applications? Thanks
Steve
I then tried to open the

Thanks for the reply
but I think I'm still confused.
I'm running jDeveloper from Windows 2k
Our run environment is 11.5.10.2 on Sun Solaris.
So all the objects are on our middle tier.
What I'm trying to do is simulate the environment by copying the files from there to my client machine.
I found out the page xml and the VO xml (which is has no EO in this case, just a query).
I'm going to extend the VO to add a default value to one of the fields.
The tutorial had the environment all set up which allows me to do this with the toolbox application but the 'ICX' environment for iProcurement is completely on our server.
I'm not sure how to point the classpath to that location. But from what I think I get from your reply (and other comments I've gotten from this forum), I want to put the files into ..\myprojects, which I've done. Also put them into ..\myclasses, though I think that is for runtime.
Unfortunately, when I try to copy the oracle.apps.icx.icatalog.shopping.server.server.xml into my project and create business object package from it, I get errors that it can't find files that are in other packages (such as oracle.apps.icx.schema.server) so I figured I was doing it wrong (the files ARE present but I haven't added other packages yet, the VO is in the package I tried to copy). The process fails and no files are present in that package in my project when I restart jDeveloper.
So I was assuming that I wasn't doing this correctly.
Now that I've given you a little more accurate information:
1. Am I doing my setup correctly?
2. Any suggestions on how I troubleshoot the problem?
Again, thanks for responding
Steve

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long. I purchased a 3 banded AV extension but it doesn't work. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I purchased extra Icloud storage on my IPhone for £14 but have been charged an additional £1.58p where can I find out what this charge was for?

I purchased extra Icloud storage on my IPhone for £14 but have been charged an additional £1.58p where can I find out what this charge was for?

Sign in, activation, or connection errors | CS5.5 and later
For your payment issues you will have to contact ales support.
Mylenium

What does ESA stands for ? and where it is use

Hi,
What does ESA stands for ? and where it is use ?
Thanx

Hi
ESA is enterprise Service Oriented Architecture.
This is a new strategic direction in which SAP AG is planning to take all industries to. They have developed SAP Netweaver for this. SAP as such is a great application but JAVA is very user friendly. In past integration of web applications was not so good with SAP.
With SAP Netweaver ABAP and JAVA gets integrated great and hence we have seamless integration between SAP and webapplicaation. This also helps to give great USER interfae with real time information search on web from SAP.
e.g. tracking information of sales order, invoice etc from web from SAP.
If helpful, reward accordingly.
Kind Regards
Sandeep

Where can i find the downloading details in "Launchpad" or "Mac app store"? I need to see that to know what the download duration for an app

Where can i find the downloading details in "Launchpad" or "Mac app store"? I need to see that to know what the download duration for an app

Is this what you're trying to find?
http://nikhedonia.com/checking-the-download-progress-of-your-mac-app-store-purch ase/

Hello. Where can I see what I am paying for, on my Mastercard. I can see many transactions but I don´t know what it is. I really hope you can help me. Thanks Helle Harling

Hello.
Where can I see what I am paying for, on my Mastercard. I can see many transactions but I don´t know what it is. I really hope you can help me.
Thanks Helle Harling

Hello again.
I have looked in my account, but can´t see all of the charges - I wonder if my daughter are using her iphone to something she dont know are cost money - but it´s over 500 dkr, so i really want to find out. Thanks
Helle

1,1 running Lion with XP Boot (re-install and what should i use for recovery disk or usb stick)?

i am trying to give my 1,1 mac pro a little love and would like to keep this machine running lion. i also have a boot camp installation of XP on it.
1. can anyone give me instructions on how/whether i can basically do a fresh install of Lion on this machine and minimize the system so it is not cluttered up with all my previous software etc, etc while still maintaining the original XP boot camp partition which i really need to have?
2. can anyone clarify for me what i should have on hand /if/ i need to boot into recovery mode or some other safe boot mode? i recently ran into an issue where i may have had to use the old Disk Utility format function and there was a reference to booting using the DVD install disks. however i am really confused as to what i should have on hand. ALSO the last time i had to do something on this machine i was told to boot into the Recovery Partition and it appears for some reason (perhaps because i had a "non-standard" windows 7 boot camp installation on the drive at the time??) that there was no recovery partition created when i upgraded to Lion.
- /anyway/ i am finding that i have the two ORIGINAL install disks for the mac pro on hand, a Max OS X Leopard and a mac OS X Snow Leopard DVD on hand but i am thinking that i should be creating some kind of USB stick similar to the one i created with yosemite? actually, i am not even sure what this USB stick for yosemite is for but i guess i can use it to boot into safe mode or something?
THANKS for any help as i'd like to get this business under control a little better in case i have an issue.
i'd also like to install Lion so that there is a Recovery Partition if possible and i think this may be possible if i don't have the windows 7 partition in the machine when i do a fresh install. any help would be great. thanks.

You have to go out of your way to build the Installer Disk yourself. But this tool makes it easy, and this site contains instructions:
http://diskmakerx.com
the bootable installer is basically to re-install the OS if i have to
Yes.
the recovery partition is somehow for fixing a problem
Recovery can go and get you the software and re-download it and start the Install, and allows the use of Disk Utility and can reset passwords.
or is there some overlap?
Yes. Both give you access to the Utilities that used to be on the Installer DVD. Disk Utility to Repair or initialize and a few other tools that can allow you to set up to install on an otherwise-bare disk or change your password.
is "Safe Mode" something completely different
Safe Mode is a way to start the fully-Installed Operating System in a special way. It first does one pass of Disk Utility (Repair Disk) against the Boot Drive. [Normally this would require booting from a different drive to make repairs.] Then it loads a minimal set of Apple-only kernel extensions, and uses a one-size-fits-all screen resolution. Then it demands your Username and password to proceed.
From there you can fix settings, use the Finder to add or delete things, and check operation with minimal extensions versus all your daily-use extensions. Very helpful for debugging extension conflicts and graphics settings problems, and fixing damaged settings. The next Restart builds a new extensions cache.

What is the logic for the behavior of LV9 when opening vi references?

I recently started using LV 9 and I can't figure out what the rationale is for the LV 9 behavior when opening references to vis. The way I understand it, LV9 looks up vis using the absolute path on the disk where they came from when opening references, even if they are in memory. If just a vi name is given, LV9 tacks on the path of the referring vi on disk when trying to open the reference. So, as far as I can see, either an application opening references to vis needs to specify absolute paths to the location on disk and be modified whenever a dynamically called vi's location on disk is changed, or a dynamically called vi has to be saved in the same directory as the vi doing the calling or in a rigid and inflexible directory structure.
Example:
I am trying to use a 3rd party library whose vis open a reference to a vi that I create, the name of which is obtained from those in memory using a name pattern. The library vis get the name of the vi I created and try to open a reference to it. Previously this worked because LV looked in memory for "my.vi" when opening the reference but this fails with LV9 because it apparently looks for, e.g., "D:\VI\3rdparty.llb\my.vi", not "my.vi". So, as far as I can see, I have to save my.vi in 3rdparty.llb in order to use it. And, if I want to use 3rdparty.llb in another application, I have to save other vis to 3rdparty.llb or create a new copy elsewhere and save to that copy for the new application. A similar situation would occur if I passed the name of my vi to the 3rdparty.llb vis - either I would need to pass an absolute path and modify my application if I ever want to move my.vi, or save it in 3rdparty.llb.
Another example:
I have a large application built into an executable that calls up to ca. 60 vis using references. Previously I could just specify the path to the executable, and I could easily open references to my vis. Now (if I try to use the LV 9 file structure), I can't figure out the paths I need to open references. Either I have to specify the absolute path to the original location in my development directories, or I have to store all my source vis in some particular directory structure. If I want to reuse my vis in other applications (which I do) things would get pretty complicated. Likewise if I want to optionally open references in other vis than my top level vi (which I do), it seems well nigh impossible.
Basically I am struggling with the concept that an application remembers the directory structure where the source files were located, and/or depends on a particular directory structure of the source files to work. Maybe I'm missing some tricks that would make things easier, but someone will have to explain to me why these are good things.

I appreciate the responses and explanations. I've certainly learned
some things. I have extensive experience using LV but over a fairly
narrow set of
applications so I'm certainly not aware of many of the possible
techniques. I clearly don't use LV in the same way as what appears to
be the mainstream for LV programmers.
I have some additional
comments on the various responses:
"But
with VI libraries and LVOOP this had the problem that multiple VIs could
end up with the same name..."
I'm not clear what this means exactly. My first response would be
that it doesn't seem like a good idea in general to use different
portions of code with the same name in a single application. I'm
surprised this is even possible. I don't think LV will even let me
build from a project in which it finds name conflicts for vis.
"In addition to what Rolf wrote, it should be
pointed out that LV should NOT be looking for files if you built your
app correctly. Each VI maintains a relative path to all VI it calls and
it should know exactly where to find them (assuming they're there).
I think this illustrates one thing I was talking about. The
assumption appears to be that the organization of your source files is
an essential ingredient in the application that is built, which is a
foreign concept to me. My project file knows where all my vis are, the
applications build correctly, and, using the 8.x and previous file
structure for my exe, they work, and have for some time. As far as I'm
concerned the main point of using a project that identifies my source
files is to be able to pull in code from different places - if I want to
use a different version of one of my dynamically called subvis, from a
different location, for example, I tell the project file to use the new
version and rebuild. In your scenario, as I understand it, I'm not sure
why a project file in which you identify source files is even needed,
if LV already knows everything about the components of the application
you're building. As I mentioned, my primary application uses ca. 60
dynamically called vis. Most of these control different subsystems of a
large distributed hardware control and data acquisition system. All of
these are used sometimes when the application is used, but pretty much
never all of them at once - typically something like 10-30 of the
user-interactive vis are run at once. There is some communication
between them using globals, queues, and semaphores and such, but for the
most part they are independent and I test them separately. Until the
application is built and used, there is no need to run the entire
application including all subvis, and I never do it. When I build my
application, the app builder finds all the vis I specify and constructs
the exe file including all the vis I've told it about. Before LV 9 it
never occurred to me that I might actually have to worry about being
able to find vis inside the executable.
"However as tst has mentioned having an
executable search for VIs is a VERY VERY bad idea as it can break your
entire app if it happens to find the wrong VI at some point."
I don't really follow this point at all. Where are these vis
masquerading as the ones I want that will break my application? The only
vis on the machines where my applications are used are there because I
put them there inside the executables. I certainly would never use
different vis with the same name in an application - as I said above, I
don't even know if it is possible, and don't want to find out. Search
paths to find components like shared libraries are a common thing. It
doesn 't seem like a stretch for the run-time environment to define a
default search path like "somewhere in the exe file containing the
application".
I don't want to make a mountain out of a mole hill here, as I said
before, I am happy as long as NI supports the 8.x file structure, but if
nothing else I have definitely learned to appreciate how different
executables built w/ labview are from executables constructed in other
systems.

What I'm paying for?

Is there a function of OS 10.4.11 that will give me the speed of my DSL connection? I want to be sure of getting what I'm paying for. I've tried the Activity Monitor and can see the real time graph...but don't know how to find the speed of what I contracted for. Thanks.

You sound like you have throughput issues with your DSL connection. I had to do a couple of things in order to get the DSL throughput that I was paying for.
My phone line to the house was actually four wires for two lines, green/red and yellow/black. The yellow/black pair was unused. I installed one of the DSL splitters right there inside the demarcation box and connected the green/red pair back to the "filtered" output (because at a phone jack inside the house, those were the wired that were hooked to the plug. I connected the yellow/black pair to the "unfiltered" output of the DSL filter and at the one and only wall jack where the DSL modem was plugged in, I replaced the outlet jack with a dual outlet jack, running the green/red pair to one of the jacks (into which I plugged the phone) and the yellow/black pair to the other jack (into which I plugged the DSL modem). Note: I connected those yellow/black wires to where the green/red would have normally connected. That gave me, essentially, two parallel lines, one for DSL and one for phone, with just a single DSL filter at the demarcation box. Multiple filters will detrimentally load your line and prevent you from getting the throughput that you are supposed to be getting.
As a side note, I actually had three branches (green/red and yellow/black) running off to different parts of the house from the demarcation box. I found the two unloaded yellow/black branches to be detrimental to throughput when I increased my DSL from 256/256 to 896/1536. So I disconnected the unloaded branches, too, in addition to using just a single DSL filter at the demarcation box.
speedtest.net will give you a rough idea of your throughput, but it is, of course, going to be dependent on the network load between you and the speedtest server. If you choose one as close as possible to your location and perhaps do the test at 2AM Sunday morning, I would think that that would give you some pretty accurate numbers.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

All I ask is that I get what I'm PAYING for, please........

First of all, let me start by saying I'll be very surprised if this actually gets posted. Took about 10 mins just to get to this point. Funny how of all sites, Verizon's load the slowest. You'd think they'd take extra measures to make this a better experience than getting asked over & over to log in after you already did, then it takes minutes (instead of seconds) just to load a page that needs another page that needs another page...
Here is my deal with Verizon. I've been a many-years customer of both home phone & DSL. Up until the last couple months I've had some issues, nothing that couldn't be resolved, but for the last couple months my internet is so slow it's like being back on dialup, ugh.. About 10 days ago I finally got fed up enough to give them a call.
Something I need to say first, about out-sourcing. I'm not a fan of it but I understand to an extent why it's being done. All I ask for though is that when I do talk to someone I can at least understand what they are saying to me. That's really important to me, I'm sure it's important to you as well. When I say "you people" I mean Verizon people, I'm not referring to anyone's race, color, etc., etc.,...
OK...so I call them up & 1st guy is "DJ" he said that was what to call him since after 3 tries I still couldn't pronounce his name correctly. I could understand him for the most part & I really do believe he tried his best to help me with my problem. I was on the phone with DJ for I dunno, an hour, maybe hour & 1/2.
Looking back on it, I don't think he was the best informed person, I don't think any of them were. We talked & I let him access not only my 2 yr old desktop but my precious not even 5 month old laptop. We tried this, this, that, that.....it was just a big run around IMO. DJ dumped my temp internet files, cookies, blah blah blah.......same on laptop. Finally, after all the time on the phone he did exactly what I knew would happen. He opened up my gateway page & said "see where it says you're getting this speed, etc? That's what you're getting." I don't care what that page says, I'm not getting what I'm paying for!
Due to the crappy service I've been getting I do speed tests daily & do them several times per day. I use speedtest.net & also internetfrog.com as well as a couple others if I need them. What amazes me is that after running me around on the phone for well over an hour, they wind up opening my gate page & then blame me, my 2 computers, my ability to see there's a real problem here. I was asked to subscribe to a "professional tech service" of some sorts at $14.99 a month & was then told that's all that could be done for me. I was then transferred to the so-called supervisor who was nothing short of RUDE, I was happy to finally end my call. The next day a woman called, I could barely understand a word she was saying so I told her I wasn't up to talking & hung up.
Call me **bleep** but I decided to "upgrade" my service. It said for 6 months I'd get a $10 rate reduction (which is cheaper than my current pkg) and I figured I'd at the very least, get better than what I was getting for only a few bucks more. WRONG!! They kicked in my new "better" pkg last night. I do get better speed test results but only at "non-peak" times & even then, they are sketchy.
I haven't done a ton of reading as of yet but so far my impression is they're over loading the hubs in my area, too bad for me. My speed tests are no better now than what they were before I "upgraded" my service. A good example is this...it took 25 mins to download a 20 mb file...tried on both computers & it was the same for each of them. If I had just one computer then sure, maybe I'd blame it on that. I have a 2 yr old desktop with XP that has never given me any problems, I do my scans & keep things running smooth. My laptop has W7 & isn't even 5 months old. You can't tell me that both are simply "screwed up" and need professional help when I know **bleep** well it's not on my part but is on Verizon's!
I am stuck with Verizon due to where I live, what options are actually available at this time. All I am asking for is that I am given what I'm paying for, what they say they're willing to provide. I do not appreciate all the running around, the bad accents with less than understand spoken words of what they consider to be "english"....I can't understand wtf they're saying to me! So frustrating, it really is. *sigh*
Sorry for the rambling but if you've read this far I think you're in the same boat I am. They used to be a company I truly did admire, now I'm just wondering how to dump them. I'm very sad about this, I can't count on Verizon any longer to be reliable & more important...that they care other than me paying my bill. ~Laurie

LauriesWorld wrote:
First of all, let me start by saying I'll be very surprised if this actually gets posted. Took about 10 mins just to get to this point. Funny how of all sites, Verizon's load the slowest. You'd think they'd take extra measures to make this a better experience than getting asked over & over to log in after you already did, then it takes minutes (instead of seconds) just to load a page that needs another page that needs another page...
Here is my deal with Verizon. I've been a many-years customer of both home phone & DSL. Up until the last couple months I've had some issues, nothing that couldn't be resolved, but for the last couple months my internet is so slow it's like being back on dialup, ugh.. About 10 days ago I finally got fed up enough to give them a call.
Something I need to say first, about out-sourcing. I'm not a fan of it but I understand to an extent why it's being done. All I ask for though is that when I do talk to someone I can at least understand what they are saying to me. That's really important to me, I'm sure it's important to you as well. When I say "you people" I mean Verizon people, I'm not referring to anyone's race, color, etc., etc.,...
OK...so I call them up & 1st guy is "DJ" he said that was what to call him since after 3 tries I still couldn't pronounce his name correctly. I could understand him for the most part & I really do believe he tried his best to help me with my problem. I was on the phone with DJ for I dunno, an hour, maybe hour & 1/2.
Looking back on it, I don't think he was the best informed person, I don't think any of them were. We talked & I let him access not only my 2 yr old desktop but my precious not even 5 month old laptop. We tried this, this, that, that.....it was just a big run around IMO. DJ dumped my temp internet files, cookies, blah blah blah.......same on laptop. Finally, after all the time on the phone he did exactly what I knew would happen. He opened up my gateway page & said "see where it says you're getting this speed, etc? That's what you're getting." I don't care what that page says, I'm not getting what I'm paying for!
Due to the crappy service I've been getting I do speed tests daily & do them several times per day. I use speedtest.net & also internetfrog.com as well as a couple others if I need them. What amazes me is that after running me around on the phone for well over an hour, they wind up opening my gate page & then blame me, my 2 computers, my ability to see there's a real problem here. I was asked to subscribe to a "professional tech service" of some sorts at $14.99 a month & was then told that's all that could be done for me. I was then transferred to the so-called supervisor who was nothing short of RUDE, I was happy to finally end my call. The next day a woman called, I could barely understand a word she was saying so I told her I wasn't up to talking & hung up.
Call me **bleep** but I decided to "upgrade" my service. It said for 6 months I'd get a $10 rate reduction (which is cheaper than my current pkg) and I figured I'd at the very least, get better than what I was getting for only a few bucks more. WRONG!! They kicked in my new "better" pkg last night. I do get better speed test results but only at "non-peak" times & even then, they are sketchy.
I haven't done a ton of reading as of yet but so far my impression is they're over loading the hubs in my area, too bad for me. My speed tests are no better now than what they were before I "upgraded" my service. A good example is this...it took 25 mins to download a 20 mb file...tried on both computers & it was the same for each of them. If I had just one computer then sure, maybe I'd blame it on that. I have a 2 yr old desktop with XP that has never given me any problems, I do my scans & keep things running smooth. My laptop has W7 & isn't even 5 months old. You can't tell me that both are simply "screwed up" and need professional help when I know **bleep** well it's not on my part but is on Verizon's!
I am stuck with Verizon due to where I live, what options are actually available at this time. All I am asking for is that I am given what I'm paying for, what they say they're willing to provide. I do not appreciate all the running around, the bad accents with less than understand spoken words of what they consider to be "english"....I can't understand wtf they're saying to me! So frustrating, it really is. *sigh*
Sorry for the rambling but if you've read this far I think you're in the same boat I am. They used to be a company I truly did admire, now I'm just wondering how to dump them. I'm very sad about this, I can't count on Verizon any longer to be reliable & more important...that they care other than me paying my bill. ~Laurie
I could have written this EXACT same message - down tot he "upgrading my service" for less money than I was currently paying, I figured, it couldn't hurt, right?
wrong
The CS guy told me that my wirespeed modem was still "the best they had" (which is a joke as I don't even think they offer this anymore.
At least now, I am paying for 1.5mbps and I'm not getting it. They WILL refund this money every month until I get something. I'm simply not going to pay it anymore.

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

Hi Guys,
What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
Business wants to run the report for any date in a past...
The report has two parameters:
As Of Date - the same as As of Date for the AP Trial Report
Trial Balance Run Date - the date when Trial Balance was run...
Conditions are:
TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Show_Flag = 'YES', where:
Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
There is a difference between the logic of my report, and the logic of AP Trial Balance...
Could you please advise what I'm missing?
Thanks,
Iana

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
Thanks,
Hussein

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

Infinity extension - What wires go where for RJ11 ...

Similar Messages

Maybe you are looking for