Info about transaction SNRO.
Hi Experts,
I need some info abt the SNRO Transaction and also the standard function module NUMBER_GET_NEXT - Internal number generation.
Regards,
Sunitha
SNRO is for number range buffering
Check this thread.
About SIDS
NUMBER_GET_NEXT - *NUmber range: Assigns next free number
r*The function module assigns the next free numbers of a number range. A number is assigned as a default if no larger number is demanded in the parameter QUANTITY. If more than one number is demanded and not enough numbers are available up to the interval limit, the numbers are only assigned up to the interval limit. If the last number was assigned, the first interval number is provided again during the next call.
The length of the number depends on the definition of the number range object. However, the length is not determined from the definition when allocating, but is calculated from the length of th from-number of the number range.
Check the more details from Function Module documentation in SE37.
Regards,
Maha
Similar Messages
-
Business transaction - get info about attached documents
Hello,
I'm looking for some FM to get infos about the documents in the business transaction. I need to know if a folder has been created, if a document has been attached in this folder...
If you also know a FM to create some folders, it is also welcome.
Thanks and Regards,
FrédéricDear Frederic,
you can try something like the following code (it checks if a document with the name LOGO is assigned to a Businesspartner and works in a same way for business transactions:
DATA:
lt_documents TYPE skwf_ios,
lt_doc_phios TYPE skwf_ios,
lt_properties TYPE sdokproptys.
DATA:
ls_sibflporb TYPE sibflporb.
FIELD-SYMBOLS:
<lfs_document> TYPE skwf_io,
<lfs_phio> TYPE skwf_io.
* get all documents to the businesspartner
ls_sibflporb-instid = lv_partner_guid.
ls_sibflporb-typeid = 'BUS1006'. "#EC NO-TEXT .
ls_sibflporb-catid = 'BO'. "#EC NO-TEXT.
CALL FUNCTION 'SKWG_OLS_BO_LINKS_GET'
EXPORTING
BUSINESS_OBJECT = ls_sibflporb
* RELATION = 'WCM_LINK'
* CSPC = ' '
TABLES
IOS = lt_documents.
* try to find the right document (name = LOGO)
LOOP AT lt_documents ASSIGNING <lfs_document>.
REFRESH lt_properties.
* Eigenschaften lesen
CALL FUNCTION 'SKWF_IO_PROPERTIES_GET'
EXPORTING
IO = <lfs_document>
TABLES
* PROPERTIES_REQUEST =
PROPERTIES_RESULT = lt_properties.
* Property "KW_RELATIVE_URL" have to be LOGO!!! READ TABLE lt_properties WITH KEY name = 'KW_RELATIVE_URL'
value = 'LOGO'
TRANSPORTING NO FIELDS.
CHECK sy-subrc EQ 0.
* do something......
ENDLOOP.
Regards,
André -
Info about CIDX adapter with a scenario
Hi all,
Can any one help me out by giving ino about *CIDX* adapter: Where its used and how its used with an example scenario
In a nutshell complete info about CIDX
I would be very gartefull
Thanx in advanceHi Prabhakar,
CIDX Adapter is Chemical Industry standard for data exchange in B2B scenarios. It uses XML formatted in different manner specific to Chemical industry.
In order to use this, you need to purchase the license.
There are xml schemas provided by CIDX for each transaction like Order Create, Order change, shipping instruction etc..
You need to download the once which are required in your scenario and use the same.
For overview of CIDX in general you can visit http://www.cidx.org -
Info about deleted request ( log )
Hi experts,
i deleted the request over cube. I received info about request-id and "request number" in log.
Can i obtain more info about this request, which was deleted ( e.g. InfoSource, DataSource) in any SAP table ?
Thanks in advance
MartinHi Martin,
Use transaction :SLG1
enter the Object * , sub obj -* and enter the From and to Date/Time -- execute
you can get the complete details.
Check the table :RSREQICODS_SAVE(Requests Deleted from Administration Stored Here)
Regards
KP
Edited by: prashanthk on Dec 9, 2010 3:06 PM -
I need some info about Tr Cd : PFCG. If anybody can send any document or give some link that will be very helpful.
Thanking you in anticipation.
Regards,
SubhasishHI Subhasish,
Tr. Code PFCG stands for Role maintenance.
This is basically used by the Basis team.
You can create simple and composite roles using this transaction .
You can describe the functions that the role is to include .
You can assign transactions to the role on the menu tab .
The menu options selected in this step are displayed in the session manager
and on the 'SAP easy access logon screen as the User menu for all users
who are assigned to the role .
Reward if useful !
Thanks
Ranjita -
Can you tell me about transaction log space? how does it gets full? How is it related to performance?
Hi,
Monitoring the SAP Log Disk
Use
The size of the transaction log must be checked regularly to work out how much free space is available on the log disk. There should always be enough free space to allow the next file extension. When the SAP system has been installed the autogrow increment is set. At least the size of this increment should be available on the log disk to permit the next file extension. If less space is available and the transaction log file fills up, the SAP system will come to a standstill.
Ideally, the transaction log should never be filled to more than 60-70%. If the transaction log regularly exceeds this level between 2 transaction log backups, the transaction log must be saved at more frequent time intervals.
The size of the log can be assessed on the basis of information given for completed backups in the SAP transaction for Backup and Restore Information.
Procedure:
1. To access the transaction for Backup Restore Information choose CCMS ® DB Administration ® Backup logs.
Alternatively, enter the transaction code DB12.
The initial screen of the monitor CCMS Monitoring Tool u2013 DB12 (Backup Restore Information) appears.
2. Choose Backup history and then Logs Backup.
3. A result list appears. Find the largest transaction log backup of the past week. Select a row and then History info to find out the number of pages that were processed during the backup. To work out the amount of space used in the transaction log, multiply the number of dumped pages by 8 KB. You can then work out how much free space is left on the transaction log disk.
If you use a RAID1 disk system exclusively for the SAP transaction log and create hourly log backups, you will rarely encounter space problems. The SAP log file is initially created with a size of 1 GB. The smallest disk normally has 9 GB space and the log file can therefore grow to 9 GB.
Hope it Helps
Srini -
complete info about OLTP
Edited by: [email protected] on Feb 27, 2009 9:49 AMHi Prabhakar,
CIDX Adapter is Chemical Industry standard for data exchange in B2B scenarios. It uses XML formatted in different manner specific to Chemical industry.
In order to use this, you need to purchase the license.
There are xml schemas provided by CIDX for each transaction like Order Create, Order change, shipping instruction etc..
You need to download the once which are required in your scenario and use the same.
For overview of CIDX in general you can visit http://www.cidx.org -
Hi Friends
Please let me know some basic info about POWA
Regards
SimhaHi,
There is no transaction with POWA.. Let me know what it is POWA
Following are few tcode's which starts with POW*
POWL_CAT Maintain POWL categories
POWL_QUERY Maintain POWL Query definition
POWL_QUERYR Maintain POWL Query role assignment
POWL_QUERYU Maintain POWL Query user assignment
POWL_TYPE Maintain POWL Type definition
POWL_TYPER Maintain POWL Type role assignment
POWL_TYPEU Maintain POWL Type user assignment
Thanks
prasad.s -
Pls give some info about userexit
hi everyone,
i never did work on userexit before. Could you give some info about how to create userexit and some knowledge related to that. Any suggestion is appreciated.
Best Regards,
JulianUser exits (Function module exits) are exits developed by SAP.
The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer.
You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
CUSTOMER EXITS-> t-code CMOD.
As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.
Among others, this enhancement technique has the advantage of
being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,
customer, and so on)
instead of a two-level landscape (SAP, customer) as with the customer exits.
You can create definitions and implementations of business add-ins at any level of the system landscape.
You can use below code to find out user exits associated with particular transaction.
*& Report ZUSEREXIT *
*& Finding the user-exits of a SAP transaction code *
*& Enter the transaction code in which you are looking for the *
*& user-exit and it will list you the list of user-exits in the *
*& transaction code. Also a drill down is possible which will help you *
*& to branch to SMOD. *
REPORT zuserexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
*---End of Program.
I hope it gives some basic idea.
Best Regards,
Vibha
*Please mark all the helpful answers -
STEP BY STEP INFO ABOUT DELTAS
hi,
this is ahmed i want info about deltas with t. codes
thanks in advance
my mail id <removed>
regards
ahmedAssuming you are talking about LO extraction:
Transaction postings lead to records in transaction tables
For an initial load a setup needs to be executed which reads the transaction data and stores the data in a setup table
These setup tables are read during an initial or full load
Further transactions are posted into the transaction tables and also caught into Update tables / Extraction Queue.
A periodically scheduled job transfers these postings into the BW delta queue(Data in the update tables is transferred
through a periodic update process to BW Delta queue)
This BW Delta queue is read when a delta load is executed.
First time initialize:
R/3 - Setup table (sbiw)
BW - Initial dataload (rsa1)
Schedule collective run (lbwe)
Re-initialize:
BW Delete initialization record (InfoPackage: rsa1)
R/3 Check delta queue (rsa7)
R/3 Process outstanding updates (sa38/se38 - RMBWV3XX)
R/3 Check delta queue (rsa7)
R/3 Setup table (delete and fill: sbiw)
BW Initial dataload (rsa1)
R/3 Schedule collective run (lbwe)
Setup and Initial load
Run test-setup without blocking to get indication of setup runtime
Split setup of historic data with 1 most current and change-able setup as small as possible
Split initial loads using disjunct selections
Delta load selections will contain union of all init selections
Once setups are done, system is free to post (when using Queued delta and V3), postings are collected in Update Tables /
Extraction queue while initials can be started.
Only after all initials have been successful, start the periodic job to transfer data to BW Delta queue
Schedule the delta load -
Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...
You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534 -
HT5085 Gathering Info About your iTunes Library - Keep getting Network error
I bought iTunes Match yesterday, and so far have not been able to use it.
It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
"We could not complete your iTunes request. The network connection was reset.
Make sure your network connection is active and try again"
Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
I've copied the diagnostic results below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 003CA7C40B1E98E0
Current user is not an administrator.
The current local date and time is 2012-05-18 20:20:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bb5c046694c1f4c590202360da9f2bc5
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {444AF521-4D63-434F-AC33-8F05DA9C6C64}
Description: Microsoft Virtual WiFi Miniport Adapter #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {4F46CBF3-C53C-4615-AF14-B46B9785D100}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
Description: Dell Wireless 5540 HSPA Mini-Card Network Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
Description: Intel(R) WiFi Link 1000 BGN
IP Address: 192.168.1.69
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Fri May 18 20:01:40 2012
Lease Expires: Sat May 19 20:01:40 2012
DNS Servers: 192.168.1.254
Adapter Name: {B32D9395-8937-42EC-BC5F-352D07958EDF}
Description: Realtek PCIe GBE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-18 20:14:07.@ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?
-
Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)
You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
ITunes and Finder - how are info about audio files refreshed?
I am now in the process of embedding artwork in my mp3-files using CoverScout. I have also updated info about all my tracks in the iTunes after embedding the artowrk, by selecting all the files and clicking GeitInfo and clicking OK (without making any changes). All albums are displayed correctly with new artworks. This, however, is not the case with the Finder.
Generally, if a mp3-file has (embedded) artwork then the file would be displayed as a thumbnail of the artwork in question. The thing is that the icons for the mp3-files that were recently embedded with artworks are displayed as lacking artwork (they are displayed with the simple iTunes icon). Moreover, the Preview of GetInfo window does not show that the mp3-files contain the embedded artwork. The files are not refreshed. However, if I copy or duplicate those files then the copied files are displayed correctly, with the right getinfo. This, however, does not work if moving files. The files are not refreshed when moved, only when copying or duplicating.
I find it curious that Finder does not refresh the files, even after restarting the Mac, given the fact that iTunes have the information that there is artwork. Is there a way to refresh the files in the finder without copying or duplicating the files?
Another curious thing with albums containing tracks with embedded artwork is as follows: the Finder displays some of the tracks as thumbnails of the artwork in question, but not with all the files. The same goes for the Preview of the files in GetInfo. Some have the correct Preview displaying the artwork, but some lack the info about the artwork in the Preview. Why are not all files displayed as having embedded artwork, but only some, given the fact that they belong to the same album and the artwork was embedded in the same way?
The same goes when I embed the artwork without CoverScout, by updating multiple files through iTunes (dragging the artwork to the Artwork-field in Info). The Finder does not display that the files are embedded. I must copy or duplicate these files in order to refresh the info.
A more general question: how do I refresh files in the Finder? There is no refresh button, as in the Windows.
I would appreciate your help.
Kind regards
AlexI was wrong about one thing concerning refreshing the files. I said that restarting the Mac would not refresh the files. However, if the iTunes have info about album's/tracks artwork then the Finder will also have this info after rebooting the system. My question is whether the Finder can be refreshed, without rebooting (restarting)?
-
Need info about programming with InCopy
Hi,
I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
Now my requirement is to create a template which has XML tag -> Style mapping.
Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
Is there a programmatic way as to apply XML tags to a document based on the styles used?
Please educate. I am a complete newbie to InCopy - so please bare with my questions,
Thank you, Appreciate your help.
Regards,
ChintanYou could download and deploy "struts-example.war" from apache website.
[That Struts 1.0.2 I think.]
---Nam
Jordy wrote:
> I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
And God said
Let there be numbers
And there were numbers.
Odd and even created he them,
He said to them be fruitful and multiply,
And he commanded them to keep the laws of induction.
[Bill Taylor [email protected]]
[nam_nguyen.vcf]
Maybe you are looking for
-
After AMD X2 3800 upgrade MSI Radio causes stop error
Hi! First of all sorry for by bad English I have an MSI TV Anywhere master card for about two years now. Until now it was running fine, using the updated drivers from MSI's site This include the main driver, and the new WinDVR 3.0 and the updated MSI
-
How do I open up a .7z file just over 1gb in size? I have just downloaded this as an upgrade from Adobe Photoshop Elements 8 to version 12. I cannot see any sign of the Akamai program on my computer that is supposed to open and install the two files
-
Can not configure Oracle 10g form on oracle 11g client
Hi I need to install oracle 10g form in my system . Here is my system 1. OS --XP 2. 32 Bit 4. Already oracle 11g release client installed ( I think that create the problem ) I tried to install oracle 10g form , it installed but can cont configure net
-
Contribute Locking out editable areas
I am having a very strange problem that I am hoping someone can help me with. I have a site set up with a Dreamweaver template in which the main content area is an editable area. When I open the pages in Contribute it is still an editable area unless
-
Business Object Suite Overview
Greetings, I have downloaded Business Objects Edge Series Xi 3.1 and have to admit that now I question what for. I was actually looking for Crystal Reports trial versions but somehow ended up with above mentioned software suite. Now I wonder, if SAP