Info object  as a Info Provider

HI Experts,
I   created one report on 0PAH_IS01(infoset). when I want execute the same ,system showing error msg
"NO INFOPROVIDER EXIST WITH NAME 0EMPLOYE"
in this situation I want to diclare my info object(0employe) as a info provider.
How can I ?

Can you please explain the solution? We are getting the same error.
Regards,

Similar Messages

  • Info-objects of an Info-provider under one Transport request

    Hi All,
    I am in the process of transporting the Objects from development to QA environment,
    As a first step in the transport process, i need to transport the info-objects before transporting other info-providers, transformations etc,
    i have several info-providers like BBP_PO, SC, SCA etc, which inturn has more than 100 info-objects that needs to be put under seperate transports.
    Say i have info-provider ZBBP_SCA which has 50 info-objects, i need to put those 50 Info-objects in one transport request and then info-provider ZBBP_SCA in another transport request and then its transformations etc.
    Can anyone tell me the steps of only collecting the necessary info-objects of ZBBP_SCA alone to be put under one transport.
    I tried to do that, but it is collecting all the info-objects, info-areas related to ZBBP_SCA, instead of collecting only necessary objects of ZBBP_SCA.
    I will assign points for sure
    Can anyone help
    Thanks in advance
    Pooja

    Hi pooja,
    So your intention is not to include anything other than target in second request.
    For this right click over the object from where you dont intend to transport and say donot transport any below in transport connection.
    The reason for target also showing the info objects and so on is that they are all necessary to form this cube definition.
    Anhyhow, as you have ensured to collect them seperately go ahead with the approach mentioned above.
    Naveen.A

  • Error while adding an Info Object in an Info Cube

    Hi Experts,
    I am trying to add one InfoObject to my info cube but I get following error:
    "InfoObject GSMBUHR is only allowed as an attribute (not in InfoCubes)"
    The Data Type of the InfoObject is TIMS.
    The Reference Char. for it is 0TIME
    And in other Properties Attribute only is checked.
    but its not maintained as an attribute of any InfoObject as I checked in where used list for this InfoObject.
    Please let me know to add it in cube.
    Regards
    Shubh Karan

    hi,
    u will not be able to add an 'attribute only' info object as characteristic in the cube
    it can only be added as an attribute in another master data characteristic. so if u still want  to include this info object , u need to unchecck 'attribute only' flag.
    hope it helps
    Regards,
    Rathy

  • How may total Info Objects can a Info Cube hold?

    Can someone explain how many total Info Objects can be used in the construction of an Info Cube?  Thanks.

    Hi Sandeep, I havent come to a point where in I got some message saying "You have reached a maximum limit".
    I think you can keep on trying and you'll come to know if you get any message.
    ~BD

  • How to lod Hierarchy from one info object to anothe info object

    Dear Friends,
    I am facing one problem with the loading of hierarchy from one object to another.
    Please find my scenario below.
    We are having 0material with hierarchy.This hierarchy is loading from R/3.We have to load this hierarchy to anothe object by replacing the nodes.So can you guys please suggest how to achieve this.Please let me know if you people are required additional information.
    Thanks in advance.
    Regards
    Madhu

    Hi Madhu,
    By default, you cant use a transformation to load data into the Hierarchy Master data.
    I havent tried it myself, but for you to explore, I'll suggest the below idea.
    Write an ABAP program to download the hierarchy table data from 0material into a flat file.
    Create flat file datasource to upload hierarchy to the other infoobject.
    Put both of them in a process chain and execute one after another.
    Hope this helps. Pls let us know.
    Regards,
    Bijesh

  • Error while creating info object

    error while creating info object a character
    Info object may be a maximum of  000060 digits...... what would be the error?
    Thanks ALL

    Hi,
    The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
    If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
    Thanks,
    Indrashis

  • Logical and physical info objects

    hi,
    whats mean by logical info objects and physical info objects?
    whats their difference?
    in what way they r helping SAP HR?
    regards,
    vijay

    Hi Vijay,
    The logical info object (LOIO) represents all info objects that have the same topic. However, it does not have any attributes such as language, format, file size, etc.
    The physical info objects (PHIO) belonging to a logical info object are the info objects that represent the contents, language and format versions of the topic.
    Check out this link for more help:
    http://help.sap.com/saphelp_sm32/helpdata/en/14/0ea434e63611d19a590000e8a4b41d/content.htm
    Hope this helps,
    Reward points appreciated,
    Thank You,

  • Removing the compounding info objects

    Hi Experts,
    I am having  a problem with large master data tables in the production system. There are 2 custom info objects ZPCA_Doc and ZPCA_item for PCA document number & item number. ZPCA_DOC is compounded with doc_typ and ZPCA_Item is compounded with ZPCA_DOC info obejcts. The number of entries in the two info objects ZPCA_DOC and ZPCA_Item is growing everyday. The number of entries in the ZPCA_Item is nearing 20 million records. I think this is due to the compounding of the info objects. As this was developed few years back I am not sure why the compounding was done.
    I need advice on:
    Is it a good practice to compound the document number & document item info Objects?
    Is it possible to remove the compounded info object on these info objects without deleting the infocube data?
    Is there any other way to control the number of entries in these info objects?
    Thanks in advance,
    Shilpa

    Hi,
    It depends on requirements of queries. But, without compounding, if you have doc no and item no seperately in transactional data, then you will be able to report data as you wish.
    My opinion is, if you have both of them in the infocube, then you can remove compounding. However, removing compounding object will require deletion of master data. you have to be careful
    Regards,

  • Reg: No enries in SID table of attribute of a  Master data info object

    Hello SAP Gurus!!!
    I Hope everyone is doing good.
    I found some issues , when i loaded master data into master data info object in sap bi.
    I have an object which is holding master data (master data info object)---ZEMPID(employee id)
    I have attributes for this object are :   Emp name , Emp Phone number
    I loaded master data attributes into ZEMPID. I could see some entries in SID table of ZEMPID char info object  .
    But i am unable to see the entries in SID table of Emp name , which is a attribute of master data info object.
    According to my knowledge whenver we load data into sap bi , automatically sid values will get generated for that characterstic info object.
    so here in this case  Emp name is also a char info object , so whenever we load the data into master data info object , we have to see the entries in SID table of Emp name also  .But i am unable to see the entries in the SID table of Emp name. .
    So what might be the problem ?
    Awaiting for your valuable answers!!!
    Cheers!!

    Hi Rajavamshi,
    You are right whenever we load data in BI, it will create SIDs for info objects.
    But it will create SID in 'S Table' not in X/Y - Table.
    If master data is enabled for Emp name then it will create SID in X/Y table. I think the master data is not enabled for attribute(Emp Name).
    Please check in S Table, the SIDs will be there.
    If it is not the case, activate the attributes info objects and EMPID info object and load the master data and run ACR for EMP ID.
    If it is not working still, then do master data check in RSRV.
    Regards,
    Vignesh.B

  • Increasing the length of Char type Info-object ( impact )?

    Hi,
    We are on BW3.5 version and we have a custom defined Info-object ZP_REPORT(say )whose length is 3 now as all the three digit series will be used up in near future we have a requirement to increase the length of the characteristic.
    This Info-object is used Navigation attribute of 0Material. And also this info-object is used as Navigational characteristic in few Info-cubes.
    Can any one please let me know what would be the impact of increasing the length?
    1)Do I need to delete the master data from this ZP_REPORT?
    2)DO I need to delete the master data from 0MATERIAL?
    3)Will there be any impact on Info-Cubes?
    Thanks in advance.
    Regards
    Ajay

    Hi Ajay,
    It is always big challenge to change the existing info object lengh or type or anything that have gone live already..........
    But if we will be very careful at the time of changing length and transport, we can do it succefully......
    Lets come to your scenario... In my understanding
    i) Your scenario is going to change the info object length that info object is only available for attribute. It is not at all used anywhere in the dimenstion table. So your cube will not be affected.... If problem will come your master data only will be affected.... Verify more than one time your info object is not at all used in any cubes. (Go to infoobject change mode check in where used list)
    ii) Before changing the length in development, data should be available in development cube as well as master data.. Because you can verify it in development itself whether the data will be deleted or not at the time of changing the length and activate the info object.
    iii) At the time of transport transport only the particular info object. Dont sent any other info objects. That might have related with any cube.
    iv) For safety purpose check whether your info cube is having which type of load. Either Full load or Delta. Most of the cubes will be having delta. If it is full, then we dont have more worry on that.
    v) Finally if possible, create one backup cube and back master data and load data from your existing cube to that cube. If the data will be more that 2 GB it is not a simple task to take a backup..... This is only for safty purpose......
    Please let me know your status...............
    Best Regards,
    Vivek

  • Share Info Objects

    Hi All
    I am working on 2 projects simultaneously and I created some info objects in an info area eg logistics and I want to use some of these info objects in another info area .
    Could some one tell me if it is possible , if yes then how ?
    Thanks

    Hi,
    welcome to the SDN.
    You can assign a infoobject to as many catalogs as you want. Double click on your info object catalog to come to the maintenance screen. On the right side you can choose your other catalog as a template and you can move the infoobjects into your catalog. Addionally they will stay in the other one. After you are done, activate your catalog again.
    Another option might be to just drag and drop the objects from one catalog to the other.
    regards
    Siggi

  • Info-Object data not appearing in Multiprovider

    Guys,
    I got a problem here. I have created a multiprovider based on master data and cube. My master data has certain attributes which are not present in the cube. I want to display data for those fields in the multiprovider.
    I can see cube data in the multiprovider view but i don't see any data coming from the master data info-object. 0INFOPROV shows only cube name.
    Is there something i am missing or any setting that i need to do ?
    Points will be awarded to the helpful answers.
    Thx,
    Soumya

    Hi All,
    Multiprovider always has issues when you are trying to link two objects vary in their structure. Lets say if you are creating a multi-provider on a ODS object & Cube or Cube & Info-object. Lets say CHAR X is available in Cube and not in ODS or master data.
    Any selection on char X will not fetch you any record from ODS / master data as it is not available in ODS / master data. You need to add the characteristic to ODS / master data and update the same way as you are updating it in the cube. Otherwise don't make any selections based on this characteristic.
    Hope it helps.
    Thanks
    Soumya

  • Goods receipt number and purchase invoice nubember info objects

    hi experts
    i have the requirement to build the report with the  info objects of goods receipt number(document) , purchase invoice numbers and purchase document numbers from standard cubes or ods.i have checked in inventory management and purchasing cubes&ods i am not success got the purchase document number it is from ods   (0PUR_O02)  the InfoObject  is 0OI_EBELN(purchasing document number),like this i want InfoObject  for Goods receipt number and purchase invoices from where can i get these fields.
    if u need any more information i will provide.
    thanks and regards
    Sreenivas.

    Hi Ahamed,
    thanks for your reply,do u have any information about purchase invoice number.
    i need one more help from you, how to find out Debtors turnover ratio from Acceount Receivables(AR) (or)G/L (General ledger account).is there any standard queries from Business content,i was checked and i was failed,if you have any solution for this please let me know.
    thanks and regards
    Sreenivas.

  • Master Data load from Info Object

    Hello,
    Iam tryting to load masterdata from info object using the standard package in 7.5 NW. My requirement is similar to the scenario 3b in the How to load masterdata doc(to prefix and strip the Compounding obj). This is the ssue i am currently facing.
    1. When i validate the transformation file , I get an error saying "Duplicate member id'12345'
    2. I have spaces in my node name. How am i supposed to give the technical name in the Member id field of the hiererchy tab in the data manager set selection options.
    3. text nodes not getting converted to member values.
    note:  I  am able to  get past this with out giving the seletion for the hierarchy in the DM package and running the package succesfully ,but i dont see the text nodes getting converted to member values.
    Please provide me some useful insights. had anyone had a similar issue??
    Thanks,
    Simi

    Simi,
    Did you checked YES to import the Text Nodes ... and even the Short Text in Language Tab under the SET SELCTION of the info object.

  • Bex Property of Info object doesn't work when Infoset is Used

    Hi,
      When I use Business partner info object ( example 0CRM_SALESP or 0BP_ACTIVIT etc) in a query build directly on a ODS(DSO)  or infocube, the Bex setting "Query Def Filter Value Selection = Only Values in Info provider" defined in the 'Business Explorer" tab of the infoobject, works perfectly. This means that if the info object has 1 Million records in the master data table, but in the transaction data only 100 are involved, when you define a varialble restriction for the info object , in the selection screen the F4 will only show these 100 data as help.
      Although this feature works fine when the query is directly developed ON THE INFO PROVIDER. However when I define a infoset on the same ODS and define  a similar query, the F4 value shows all the data from the master data table instead of the ocurance in the transaction data( info provider)..
      Is there any way , I can get over this issue.
      Thanks
    Arunava

    Hi,
      I guess, I couldn't ecplain the issue properly earlier.
    What I am saying that even though I have the proper setting in the BEX tab ("Query Def Filter Value Selection = Only Values in Info provider")  for the info object , It behaves differently if the query is defined directly on ODS then on the infoset which is built on top of the ODS.
    When the query is build on the ODS the setting works fine
    However when the query is defined on the Infoset, the F4 help get the value from the info object master data.
    My question is , why this two different behaviour for the same info object? And how do I over conme this to get the same bahavious in info set as of the ODS.
    Thanks
    Arunava

Maybe you are looking for