Infocube and ODS level Security

Hi Gurus,
Just wanted to secure by Infocube and ODS, not to see other group of people. May I know step by step instructions for doing this
Hari

yes you can control using the s_rs_comp,s_rs_comp1,s_rs_odso,s_rs_icube objects

Similar Messages

Develop report based on INFOCUBE and ODS

Hi,
Pls, can anybody help regarding developing reports based on INFOCUBE
and ODS object
i am using SAP BW 7.0
what is the transaction code for reports
what are the steps to develop reports
Thanks\
- Mubeen.

There is no transaction code as such as you have to use the front-end application to create queries off your Cubes/ ODS.
open Bex query designer -> select info provider (cube or ods) -> drag and drop the keyfigures in columns, -> char in rows -> save.
Also look at
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

How to design infocube and ods

Hi all,
How to design infocube and ods. What are the steps involved in this process. please send me to : [email protected]
thanx in advance
bhasakr

Hi Bhaskar ,
I found the following links which is very good as it shows how to create infocube step by step from basic with snapshots.
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/step_by_step.htm
Also check the foll.
http://www.awprofessional.com/articles/article.asp?p=28666&seqNum=3&rl=1
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a643fe07211d2acb80000e829fbfe/content.htm
http://www.crestech.org/Crestech/CourseCatalog/Acrobat/Sap/sap_bw_80hrs.pdf.
for creating ods objects
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
http://www.nesug.org/html/Proceedings/nesug04/pr/pr02.pdf.
http://64.233.167.104/search?q=cache:cg6dvsTAmxUJ:www.vdestiny.com/CourseOutlines/PDF/The%2520Output%2520Delivery%2520System%2520in%2520SAS%2520Software%2520-%2520Basics.pdfcreatingods&hl=en&gl=in&ct=clnk&cd=10
Please reward for the same.

Infocube and ODS populated with DATA (need to add one more field?)

Hi,
If infocube and ODS have been populated with data for past 3 months. Then we need to add one more field to this cube. What is the impact? Please advise.
The following is my understanding. Please correct me if I am wrong.
1) Need to delete content of ODS and infocube.
2) insert the new field at ODS and infocube.
3) reload the data into ODS and infocube.
Is there a way that the current data need not be deleted.
Just add in this new field and only subsequent month, infocube will have this new field? Please advise what is the best approach without affecting existing data.

Hi,
Siggi is right. You dont need to delete the previously loaded data to CUBE or ODS. The only catch is that, your new field will be empty as far as history is concerned. But so long as you did map it to the datasource and the datasource is able to fill it up, then your new field will now have value for incoming DELTA Updates.
Addition of a field is not that complicated compared to deletion of a field from CUBE or ODS.
--Jkyle

Multiprovider on top of Infocube and ods

Hi,
I'm just wondering, I would like to create an Multiprovider on top of infocube and ods. While creating multirovider I can able to see my infocube but in ODS tab I'm not getting ODS which I need to consider.
I've gone through all available ODS's in ODS tab while creating Multiprovider but my ODS is coming here.
I'm working on BW 3.5 Version.
Advance thanks you very much.

Hi,
Just check weather u have any keyfigur in ur DSO or not. If not just add one keyfigur in your ODS and activate it and then try to look for it in multiprovider.
Hope it will help you.
Thanks
Mayank

Load data to a modified InfoCube and ODS used in Production

Hi,
I have added few fields (InfoObjects) to the cube(s) and DSOs in BI 7.0. These Cubes and DSOs are BW 3.5 Objects and are in-use in Production.
My question: After I transport this new/enhanced InfoCube and DSO from Dev/Qua to Production, how to retrieve the old data from original Cube/DSO and populate data to new fields at DSO and Cube level.
Please advise.
Thanks,
~S

Hi Siddhartha Nayak
As ur enhanced the IC & ODS which r 3.x objects, i guess u havn't used the remodeling tool. Then u have to follow the old procedure to enhancing the cube.
Create a copy cube , Delete the contents of existing cube, enhance it & load the data to existing cube back from copy cube.
Same thing u have to follow in ur case also.
Regards,
Shaiksha.

Domain and User Level Security

Dear Friends
Tuxedo Version : 8.0
Weblogic Server: 7.0
Operating System : Win 2000
I have successfully run the simpapp example with WTC as the connector between
the remote domain (tuxedo) and local domain (WLS).
Now, i want to perform authentication, the documents are not being of much help
so can anybody give me any suggestion to create domain level security and ACL.
Please note, i'm just using the services (import).
As per the documents and newsgroup,
i made changes to the TUXEDO ENVIRNMENT, ubbdomain, adding SECURITY , AUTHSERV
parameters in it.
Also made respective changes in WTC, but when i run the example,
it throws an exception as TPENOENT.
Thank you in anticipation.
Please help me !

Hi Shamu,
I answered similar questions in a posting with title "Service
Authentication How to". The questions were posted after your post.
Check out the questions and my reply see whether they are useful to you.
Regards,
Honghsi
shamu wrote:
>
Dear Friends
Tuxedo Version : 8.0
Weblogic Server: 7.0
Operating System : Win 2000
I have successfully run the simpapp example with WTC as the connector between
the remote domain (tuxedo) and local domain (WLS).
Now, i want to perform authentication, the documents are not being of much help
so can anybody give me any suggestion to create domain level security and ACL.
Please note, i'm just using the services (import).
As per the documents and newsgroup,
i made changes to the TUXEDO ENVIRNMENT, ubbdomain, adding SECURITY , AUTHSERV
parameters in it.
Also made respective changes in WTC, but when i run the example,
it throws an exception as TPENOENT.
Thank you in anticipation.
Please help me !

WWSBR_ALL_ITEMS and item level security - BUG?

Hi,
View WWSBR_ALL_ITEMS does not seems to work correctly when using item level security on a folder.
If I add an item to a folder with item level security enabled and do NOT define any special access settings for this item, ie the item setting is "Inherit Parent Folder Access Privileges", then the view does not return the item.
Has anyone else run into this? Is it a bug?
Any help appreciated.
Portal 3.0.9.8.0
Oracle8i Enterprise Edition 8.1.7.0 - 64 bit
IBM AIX 4.3.3

I've been informed that patch 3.0.9.8.2 will solve the problem. Sorry about the double post.

Categories and Item Level Security

Hi,
We have implemented item level security on our pages. We also use Categories so that a user can retrieve all content that falls into a particular category easily e.g. address books or Policies and Procedures.
The desire is that if a user clicks on a category and an item the user normally would not see because of item level security on the page where the content is located, then the user should not see that item among all the other items returned by the category search.
What is happening is either that a link to the item is returned among all the other items in the category or we get an access error for the entire category.
We have tried playing with the settings on the template used for the category and with the access on the category result page but have not found the magic bullet yet.
One other interesting behavior in the situation where the restricted item is visible in the returned category search is that clicking on the Page link (instead of showing the page group the item is on, we show the link of the page the item is on)it takes us to the page and the display link for the secured item is now visible followed by what looks like a "smudge" type of character. The item's link can then be clicked and the item's content is now available to the user.
Thanks in advance for any help,
Peter

Tabs don't work with Item Level Security in 9.0.2. Fixed in the upcoming 9.0.2.6 release.
Regards,
Jerry

Sequence in parent and row level security

Hi,
I have a column with "seq in parent" for the "autogen type" property in Designer.
I also have row level security (RLS) (or fine grained access control) on this column's table.
Since there are data that could not be seen because of the RLS and the sequence is "seq in parent", i get the error :
ORA-00001: unique constraint (string.string) violated
Cause: An UPDATE or INSERT statement attempted to insert a duplicate key.
Example : User A inserts a row and the sequence is 1. User B who cannot see the row inserted by A, inserts its own row. The sequence inserted by B also gets 1 instead of 2 (because he cannot see the existing sequence 1). The sequence is duplicated, hence the error.
Is there a turnaround for this ?
Thank you.

You could consider using a 'real' sequence instead of seq-in-parent. I think seq-in-parent is using something like 'SELECT MAX(seq) FROM'... and that could also fail (depending on the moment this statement is issued) when 2 users are inserting a record.
HTH
Roel

SAP-BO SSO and Row Level Security

Hi,
We can configure the SAP authentication and able to login InfoView via SAP user name and password. And also, we can import the roles from the SAP system.
When we create a connection to BW cubes from designer, we want to use "Use Single Sign On when refreshing reports at view time" to apply row-level security which is defined at the BW cubes.
In our tests, we use "Use BusinessObjects credential mapping" while creating connection from designer to test the row level security. As you can guess, after importing the SAP user, in CMC screen > Users and Groups > Users, we manually enter the password of the user to the Database credentials part. However, as you can guess, the password of the user's is not static and that is not a good solution.
My question is that, do I need to configure SSO between SAP and BO system or how can I enable row level security?
System Information
Business Objects XI 3.1
SAP Intg. Kit 3.1
Thanks a lot,
Omer

Hi Omer,
please note that only row-level security implemented through authorization variables in BW queries can be used in BusinessObjects. Row-level security defined at cube level will not be applied.
As long as you have used the SAP authentication to log on your BOBJ server, the SAP credentials will be used automatically to get the data from your SAP BW source as long as the "Use Single Sign On when refreshing reports at view time" option is selected in the Database configuration panel (Found in the CMC when viewing the properties of your report) and the option "Use BusinessObjects credential mapping" is selected in your universe connection.
Please note that this will only work for reports that are invoked directly in the infoview. If a user schedules such a report, she/he has to enter her/his SAP credentials explicitely in the Database Configuration Panel appearing in the scheduling assistant window. In this case you can activate SNC trust between your two servers in order to avoid entering a password when the report is scheduled.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on May 5, 2009 10:16 AM
Edited by: Efstratios Karaivazoglou on May 5, 2009 10:23 AM

Tab level and column level security

Hi
Can anyone suggest a high level view of implementing a tab level security based on the user logged on? I have a form that has multiple tabs and within each of these tabs there are multiple fields displayed (in a multi record block). Based on the user, the relevant canvas tabs should be enabled and only those fields within each of these tabs to which the user is authorized to view should be displayed. I am looking for an approach methodology that can be implemented dynamically. There could be another form to maintain the user, roles and accessibility options.
Any suggestions are welcome.
Thanks

When the form loads, capture the username (network login ID).
Based on this username, in you when-new-form-instance trigger or when timer expired trigger(you have to create a timer for this), set the property that certain tabs/fields must be enabled/disabled depending on the user.
Say, you have two groups of users, admins and non-admins..
when the form loads, capture the username
compare this username with the tabular data to determine if that user is an admin or non-admin (you can do this using a select query)..
and using when-no-data-found exception you may set the appropriate previleges using set_tab_property('tab_name',ENABLED,property_true) and hence forth
hope this helps

Page and filed level security

Currently we are in the process of developing pages which involve both role based security as well as page level security. For e.g. depending upon a user is Admin or Moderator or guest user, certain pages may/may not be visible to him/her.
At the same time within a page itself some fields may or may not be editable to them.
How can u achive both a coarse grained as well as fine grained security mechanism.

Container security will be able to achieve this.
In the web.xml you can specify individual pages/folders which require a certain role to access. That should do you well enough for page level security. You need to define <security-role> and <security-constraint> sections in web.xml
With regards to components on the page, you have to go to the coding level. There are helper methods such as request.isUserInRole() which you can use to include/leave out various bits of a page.
Hope this helps,
evnafets

WebServices and message level security

Hello,
I am investigating about the use of XI web services using message level security (encrypted xml), is it possible to achieve this between an SAP provider and a third party consumer, without using a PCK or developing a specific adapter? (most solutions I see always point to this).
If anyone could shed some light into this matter i would be thankful.
Regards,
Leandro Fonseca

Hello,
I am investigating about the use of XI web services using message level security (encrypted xml), is it possible to achieve this between an SAP provider and a third party consumer, without using a PCK or developing a specific adapter? (most solutions I see always point to this).
If anyone could shed some light into this matter i would be thankful.
Regards,
Leandro Fonseca

Infocube and ODS level Security

Similar Messages

Maybe you are looking for