Infocubes for HR

Hi Experts,
I tried to get the information on HR cubes provided by SAP BI and found few from Help.sap. But i was i need of the Infocubes & Queries with technical name starting "0HR_".
Can anyone provide me the links for HR Infocubes "0HR_"
Thanks,
Sujeet

Hi Sujeet,
List of cubes in HR :
Personnel Administration
1. Headcount and Personnel Actions 0PA_C01
2. Headcount 0PAPA_C02
Recruitment
1. Applications and Applicant Actions 0PARC_C01
Organizational Management
1. Staffing Assignments 0PAOS_C01
Personnel Development
1. Qualifications 0PAPD_C01
2. Appraisals 0PAPD_C02
Compensation Management
1. Adjustments 0PACM_C02
2. Awards 0PACM_C03
3. Compensation Analysis 0PACM_C01
Personnel Cost Planning
1. Personnel Cost Planning 0PACM_C05
Personnel Cost Planning and Simulation
1. Travel Planning: Booking Data 0FITV_C02
2. Travel Expenses: Totals and Receipts 0FITV_C01
Personnel Time Management
1. Time and Labor Data 0PT_C01
2. HR MultiCube (Time and Payroll Data) 0PY_MC02
Hope this helps.
Regards
Hemant Khemani

Similar Messages

Standard or custom procurment ODS, InfoCube for BI-7.0 implementation

hai
we are implementing BI-7.0 for first time to the clien for procurement .
so we need to extract the data from EKKO,EKPO and some other procurment tables.
so can if i use 2LIS_02_HDR, 2LIS_02_ITM . can i use the standard 'purchasing' ods and infocube.
If i want to use standard purchasing ods,infocube then they are in BW 3.0 . But we want in BI 7.0.
So what can i do for this one. Otherwise can i use the custom ods and InfoCube for procurement secario.
pls suggestion mw wht i have to do ..
i will assing the points
kumar

Hi.
I thought you asked me if it was OK to use the standard DSO and Cube from rel 3.0 although you are on 7.0?
You should use that DSO and cube, that's what I meant. You will not have any problems with using them although you are on a 7.0 system.
Hope I'm cear, or have I misunderstood anything?
Kind regards
/martin

Partition InfoCubes for non-cumulatives

Hi,
I would like to partition inventory cube 0IC_C03 that consists of non-cummulatives. The partition was executed from 12.2007 to 12.2010. I would like to add partition to 12.2012 via option "Adding Partitions". There was error prompt that infocube for non-cummulative has to carry out by using option "complete repartitioning".
Can expert please share with me what would be the recoomendation in order to enter the correct value for complete repartitioning?
Thanks and regards,
Kang Ring

Hi,
Not able to select by Year, the only active option is 0CALMONTH.
Regards,
Kang Ring

Output showing up in 2 different rows in Infocube for same Billing Number

Hi,
I have a Billing Infocube which gets data from 2 DSO's Billing header DSO & Billing Item DSO seperately. In Billing header, i have Billing Doc. Number & Shipping condition. In Billing item, i have Billing Doc. Number & Billing Quantity. In the report that i created on this Infocube, i have a column, where i restrict the Billing quantity based on Shipping condition. When i execute the report, this particular column is coming up totally blank. To verify at the backend, I checked the 2 DSO's seperately taking one common Billing document number, i get data in both DSO's.
When i check the Infocube for this 3 Infoobjects, I see the output in 2 seperate rows, one row with Billing document number & shipping condition values and another row with the same Billing document number & Billing quantity. I think because of this only, in report also, the column is coming blank. Why is the output not getting displayed in one single row in Infocube? How do i make this to work?
Regards,
Murali

Hi Murali,
That will not cause the issue the reason being, in your FACT table for document number now SID values will be populated (due to line item dimension) and it will be unique for each document.
But if you look at the cube design then for each of your other dimension a unique DIMID will be created in DIM table for unique combination of all the underlying attribute values.
for e.g. say you have following cube design,
Document number,     attr1,   attr2, attr3, attr4    Key1.
Now your attr1 and 2 are getting loaded from one flow and they belong to same dimension, and your attr3 and attr4 are getting loaded from another flow and they belong to another dimension. The data will be created in the cube as follows,
Document number    DIM1   DIM2   key1
   100                          10       0        100
    100                          0        10      may be 0 to avoide data duplication.
If you see the DIMID values in fact table they are different due to different data load from two separate data flow. And that is the reason you might have multiple rows in cube for same document number.
Regards,
Durgesh.

Table to check number of entries in an Infocube for a particular selection

Hi All,
Is there a table in BW system which would give a the number of entries in an infocube for a particular selection just like the flatR/3 table which has the button on top for checking the number of records?
Any close work around to check the number of entries in an Infocube would be appreciated.I have tried to find out the number of entries from F & E table but in vain.

Hello,
You can try the following:
1) Right click on cube display data, select all attributes and nav attributes yo are interested in
2) Go to field selection for output, here select only the nav attribute you want the no of records against (dont select any KF) , hit execute
3) In selection screen provide the selection you want to give
4) Scroll down, uncheck do no use nay conversion and use mat aggregates, keep Max no of hits blank
5) Check use DB aggregation and output no of hits
This will give you the number of records for the nav attribute value u have selected.
You can use sum function in the ALV GRID if you want to sum up multiple values.
Regards,
Shashank

List of business content infocubes for SD

Hello all,
I need some help with analyzing enquiries from SD module. Can anybody send me the links to some resources where I can find list of business content SD Infocubes? Is there any infocube for the said purpose? Or are there any infoobjects that can be added to a standard infocube to get this functionality? Please guide.
Thanks and regards,
Sumit

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/ea/581e3b33561f2ee10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6f/3de73f2dc6f106e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ea/581e3b33561f2ee10000000a11402f/frameset.htm
Thanks
Reddy

Infocubes for Sales and distribution

Hello all!
i need to know what are infocubes for sd? i will to start this cubes in bw enviroment. anybody has some documentation about this? if yes, i appreciate if could send to me.
thanks.

Hi,
Please go through the below link.. you can get good Idea about Sales. In my experience I used 0SD_C03 cube, I just copied Z-Cube using 0SD_C03 and dded some InfoObjects and then created Trasfer/Update/Transformations using 2LIS_11_* 2LIS_12_* and 2LIS_13_* DataSources.
The bvelow link contains all information.
http://help.sap.com/saphelp_nw70/helpdata/en/90/d4f33b949b6b31e10000000a11402f/frameset.htm
Thanks
Reddy

How to find out relevant Infosources and Infocubes for Datasources (LO)

Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance

1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose Replicate.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in Dataflow Before and afterward. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both Characteristics: Logistics General and Key Figures: Logistics General. Right click on it and select Insert Objects for Collections.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
Pls give point if you see its helpful.
Regards,
Chuong Hoang

Standard InfoCube for BI Query

Hi all,
I need to identify standard InfoCubes for the following requirement:
- Sales order amount per order, customer, division *should be extract from sales order
- Sales cost amount per order, customer, division *should be extract from CO/PA?
- Sales revenue amount per order, customer, division *should be extract from billing document
- AR amount per order, customer, division *should be extract from FI? AR?
- Cleared AR amount per order, customer, division *should be extract from FI? AR?
Could you let me know what standard InfoCube would fit the best for this requirement?
Cheers~

Hi Dave,
If you can't find the exact standard one, you can always copy the existing sales cube which has other information you want
and add a new Key Figure to calculate the amount you want through routine or formula.
Another option is, you can always do the calculation at query level through CKFs or Virtual KFs.
Thanks.
Edited by: Venkatesh Iyengar on Oct 12, 2010 6:21 AM

Unable to consolidate data from two DSOs into an InfoCube for reporting.

Hello Experts
I am working on BW 7.0 to create BEx Report as below:
This report will have data coming from two different sources, some data from COPA DSO [such as Customer Number, Product Hierarchy1, Product Hierarchy2, Product Hierarchy3, Product Hierarchy4. Product Hierarchy5, Product Hierarchy6 and a few other Key Figures] and the rest [such as Product Hierarchy, Reference Document, Condition Type (both Active & Inactive), Condition Value and a few other Key Figures] from another DSO (ZSD_DS18) which is a copy of the BCT DSO (0SD_O06). I've chosen this DSO because this is the BCT DSO which is used to store data from a Standard Extractor 2LIS_13_VDKON.
Below are the screenshots of these 2 DSOs:
I have successfully extracted the data from 2LIS_13_VDKON (includes PROD_HIER but not Customer Number) and loaded into a DSO (ZSD_D17).
All the testing is done using only one Sales Document No (VBELN).
First test that I tried is.. to create an Infocube and loaded data from ZCOPA_01 and ZSD_DS18 and when the LISTCUBE was run on this InfoCube, the data is coming up in two different lines which is not very meaningful. Screenshot below:
Therefore, I have created another DSO (ZSD_DS17) to Consolidate the data from ZCOPA_01 & ZSD_DS18 establishing mappings between some of common Chars such as below:
ZCOPA_01 ZSD_DS18
0REFER_DOC <-> 0BILL_NUM
0REFER_ITM <-> 0BILL_ITEM
0ME_ORDER <-> 0DOC_NUMBER
0ME_ITEM <-> 0S_ORD_ITEM
51 records are loaded from ZSD_DS18 into ZSD_DS17 and 4 records are loaded from ZCOPA_01 into ZSD_DS17 for a particular Sales Document Number.
When I am using a Write-Optimized DSO, data is coming in just 1 line but it is showing only 4 lines which is aggregated which is as expected since W/O DSO aggregates the data. However, when I use Standard DSO, the data is again splitting up into many lines.
Is there something that I am missing in here while designing the Data Model or does this call for some ABAP being done, if so, where or should I have to talk to the Functional Lead and then Enhance the Standard Extractor, and even if I do that, I would still have to bring in those Key Figures from ZCOPA_01 for my reporting?
Thank you very much in advance and your help is appreciated.
Thanks,
Chandu

in your (current) InfoCube setup, you could work with "constant selection" on the key figures
for the COPA key figures, you'll need to add product hierarchy to the key figures with a selection of # and constant selection flagged
for the SD key figures, you'll have to do the same for customer & the product hierarchy levels (instead of product hierarchy)

Which one is better ODS-INFOCUBE for reporting in BW

Hello expert's
1.I want to know which one ODS or INFOCUBES are better (technically/functionally) for reporting purpose in BW.if some one is having any comparisons on ODS/INFOCUBE then plz pass on to me.
2.Are Z tables reliable in case of data updation and fetching when we create ODS/INFOCUBE.
3.HOW RELIABLE THE "Z"(*TABLES/REPORTS) are in SAP-BW/R/3-ABAP.

1.Cubes are optimized for reporting..due to star schema structure.Use cubes for reporting aggregated data to be accessed by large number of users.
ODS are for detailed level reporting.ODS structure is like flat DB table.
usually drilldown is setup from cube report to the ODS report.
2.Are u referring to custom ODS and cubes..then they have the Z tables internally..reliability depends on ur design.But always try to use BC content,else copy BC content and change/enhance it.else if no BC content found then create Z-content directly.
3.Again,depends on the design.But always using BC content is suggested.
cheers,
Vishvesh

Which on is better-ODS/INFOCUBE for reporting

Hello expert's
1.I want to know which one ODS or INFOCUBES are better (technically/functionally) for reporting purpose in BW.if some one is having any comparisons on ODS/INFOCUBE then plz pass on to me.
2.Are Z tables reliable in case of data updation and fetching when we create ODS/INFOCUBE.
3.HOW RELIABLE THE "Z"(*TABLES/REPORTS) are in SAP-BW/R/3-ABAP.

Hi Gaurav,
1.The choice of ODS or cube for reporting depends upon your requirements. It depends upon several factors like the details in which you want to see the reports, the amount of data you will be looking at etc. Since ODS is a flat structure (transparent table), you can not store large amounts of data. If you want to see some reports which contains data for several years (huge), you are better off running a report on a cube. Otherwise, reporting on ODS is ok. It all depends on your requirement.
2. You definitely can extract data from Z tables in R/3. Again the type of extraction depends upon the design of the R/3 table. You should not have any problem in extracting the data from R/3 Z tables into an ODS or cube.
3. When you say Z tables/reports, they are totally custom made. So, if they are used regularly in R/3, i think they must be reliable. If they are not reliable, they would not use them in the production server.
Hope this helps.
Thanks and Regards
Subray Hegde

Remote Extractor and Real Time Infocube for SEM BCS

Hi Experts,
I have somes doubts about the integration between SEM and BW.
There is a cycle that have the next processes:
1.- begin in R/3 with the movements in FI, CO and/or general ledgers
2.- Activate the extractors standards for replicate/extract data to BW. For example, 0FI_GL_XXXX.
3.- Configure a method for take the information from BW to SEM.
4.- My doubt begin here... For take the information from SEM to the real time infocube, where I configure? What Have I for configure?
The real time infocube, What is the proposal? Where take the data? Here, Do the remote extractor begin to apply?
Thank you very much for your collaboration.
Regards,
Jeysi Ascanio

We're using 0FI_GL_20 to read directly from FAGLFLEXT into SEM-BCS via a BI remote cube. There are some basic transformations in BI to "populate" the remote cube, then a standard Load from Data Stream in BCS to do final mappings. In the BCS workbench, just create a source data basis off the remote cube.
This works at my current project due to fairly low ECC data volumes. If you are doing any complex mapping on the Company or Fiscal Year / Period infoobjects, you may need to create a inverse mapping routine in the remote cube to transfer selection criteria. If you see messages in the monitor following a data load such as "xx,xxx of xxx,xxx records ignored", that means that you are reading too much data from ECC and it is only getting filtered on the BCS side. We had this problem with a custom extractor and adding an inverse mapping routine cut the load from ~5min to 30sec. (Basically, the custom, template-delivered, extractor only had 0FISCPER, not 0FISCPER3 and 0FISCYEAR, so we would read all 17 K4 periods into BI, map them into BCS, then BCS would throw out the unneeded periods. Unfortunately, we did not have the option to change the extractor, so this was the best approach.).
If I had large data volumes, I would use a regular BI basic cube for staging (or possibly a multi-cube with a mix of basic and realtime, depending on the load requirements to BCS).
If you use 0FI_GL_20, I would strongly recommend you implement OSS Note 1245822, or be on SAP_APPL 603.0002 or later.
Hope that helps,
- Chris

Infocube for infotype 005

Hi all,
Which infocube should i use for infotypes from HR in Business Content 3.5. In fact i need only 0005 infocube
thanks,
Yigit

you can check this datasource..
0HR_PT_3 (Quota transactions) ...in Time management...
some of the fields in this datasource are coming for IT0005....
Hope it helps

Standard InfoCube for FI (General Ledger)

I have a question on BI content (Business Content). Is there a standard InfoCube to analyse data in FI module? I can't find.
Thanks,
Olga

For General Ledger, where the new Financial Reporting capabilities in ECC EHP3/EHP4 haven't been enabled, the standard content InfoCubes are (see info on [SAP Help Portal|http://help.sap.com/saphelp_nw70/helpdata/en/f3/9f3c8e6a5d4033ba84a76284fe7420/frameset.htm]:
1) 0FIGL_C01 - General Ledger: Transaction Figures
2) 0FIGL_C02 - Cost of Sales Ledger: Transaction Figures
3) 0FIGL_VC1 - General Ledger Accounting: Balance Sheet & P&L Statement
4) 0FIGL_VC2 - Cost-of-Sales Ledger: Balance Sheet and P&L
For the new Financial Reporting capabilities (see flows for InfoCubes on [SAP Help Portal|http://help.sap.com/saphelp_nw70/helpdata/en/e6/f16940c3c7bf49e10000000a1550b0/frameset.htm]:
1) 0FIGL_C10 - General Ledger (New): Transaction Figures
2) 0FIGL_R10 - General Ledger (New): Transaction Figures, Remote
3) 0FIGL_V10 - General Ledger (New): Financial Statement
4) 0FIGL_V11 - General Ledger (New): Financial Statement, Remote
Edited by: Dennis Scoville on Aug 19, 2009 9:24 AM

Infocubes for HR

Similar Messages

Maybe you are looking for