Infopackage-Load Many Files from Application Server and later Archive/Move
Hi All..
I have a doubt, I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
- How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
- In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
p_filename =
p_subrc = 0.
Thank you for your ideas or recommendations.
Al
Hi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al
Similar Messages
-
Error Loading the file from application server
Hi Team,
I'm trying to load the .CSV file from application server and I'm getting the error message.
In the data package
Update to PSA --Green
Transfer Rule -- Green
Update Rule - error ABORT was set in the customer routine 9998
Error 1 in the update
Please help me to provide the solution.
But when I try to load the other files there are no issues. thanks.
Regards,
SenthilRaj
check the below links, which can helps to solve your issues
Flat file data load
flat file Data loading issue
Mahesh -
What are the commands available to read a file from application server and
What are the commands available to read a file from application server and store the file into an internal table?
Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
Reading XML file from application server and put into internal table-4.6C
Dear All,
Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest.
Thanks and regards,
AtanuHi Atanu!
Simply use the XSLT transformation 'ID'.
FIELD-SYMBOLS <ls_result> TYPE ANY.
CREATE DATA lref_data TYPE (your_structure).
ASSIGN lref_data->* TO <ls_result>.
CALL TRANSFORMATION id
SOURCE XML xmlstr
RESULT result = <ls_result>.
"xmlstr" contains your XML file. Just read it into it via standard I/O operations. "<ls_result>" will contain your DDIC formatted content.
Best regards
Torsten -
Error loading csv file from application server
Hi all,
While uploading a csv file from the application server to psa we are getting the following error,
Error 2 while splitting CSV data record
Message no. RSDS_ACCESS011
Diagnosis
Error 2 occurred while splitting the CSV data record 1
1 = Could not find a closing escape character
2 = Invalid escape character
3 = Conversion error
4 = Other error
System Response
The function was terminated.
Procedure
Check the values of the data separator and escape sign, and try again.
But i've checked the file and the escape sign, data seperator in it also. Everything is fine. The same file we are able to load successfully in quality system.
How to solve this error??
Thanks in advance.Hi BI consultant:
Could you please provide more details?
For example:
1.Is your P application server a UNIX flavor? (Solaris, AIX, UX, Linux)
If yes..
2. Are you able to see the contents of the file correctly with a "cat" or "vi" command? (at operating system level).
If no...
3. Did you upload the csv flat file to the server via FTP?
If yes...
4. Did you use the "binary" or the "ascii" parameter on the FTP command used to upload the file?
Probably you need to upload the CSV file again to your application server and make sure you can se the file contents ("cat" or "vi" command) before trying to execute the InfoPackage.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 3, 2010 11:13 AM -
Error when loading a flat file from Application server.
Hi,
I am trying to load a flatfile from the application server, and I am getting the message
Error while accessing the application server file
Message no. RSDS_ACCESS002
I checked for notes and found only one:
Note 1033978 - Correction: Loading Unicode files from application server
but we have 19 SP level, and the note says it needs 13 SP level, so I think it would not be of any help.
does anybodie know what to do??
thanks for the help.
MauricioError in accessing while application server file..
when i am trying load the data to psa
when i am taking the file name: text-type file from app server
plz reslove me for this problem??
another question
when i am saving the file with using * in the filename in .CSV file its not saving,
whats the reason????
ASHOK -
Upload XML file from Application Server to Internal Table
Hi Experts,
i have xml file in application server and i want to convert to internal table .
i have tried this link http://wiki.sdn.sap.com/wiki/display/ABAP/UploadXMLfiletointernal+table.
Here the file is loaded from local(presentation Server) ..
i want to know how to select file from application layer ..and schedule in background..
i also tried FM '/SAPDMC/LSM_F4_SERVER_FILE' but this need front end selection of file from application server..
i need to select a xml file from application server and convert into internal table in background.. help me on this..Have a look on
Re: How to convert XML data to different ABAP internal table
Thanks
Ravin -
Reading File from Application Server using Read Dataset
Hi,
i am trying to read excel file from Application Server and has multiple records in that based on structure below. but when i execute its giving me error message.here is the code, can sumone suggest me on this please ??
FORM f_data_upload .
DATA:
l_filename TYPE string, "file name
l_wa_string TYPE string. "file record
l_filename = p_inp_as. "File path from Application Server
OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Read the data from the file in Application server.
READ DATASET l_filename INTO l_wa_string.
IF sy-subrc = 0.
SPLIT l_wa_string AT cl_abap_char_utilities=>horizontal_tab
INTO w_data-tcode
w_data-matnr
w_data-mtart
w_data-werks
w_data-vkorg
w_data-vtweg
w_data-lgort
w_data-meins
w_data-maktx
w_data-spart
w_data-kosch
w_data-mstae
w_data-brgew
w_data-ntgew
w_data-groes
w_data-matkl
w_data-prdha
w_data-mstde
w_data-mtpos_mara
w_data-gewei
w_data-spart
w_data-mstav
w_data-mstdv
w_data-dwerk
w_data-taxkm
w_data-versg
w_data-kondm
w_data-ktgrm
w_data-mtpos
w_data-mtvfp
w_data-tragr
w_data-ladgr
w_data-herkl
w_data-ekgrp
w_data-webaz
w_data-dismm
w_data-beskz
w_data-prctr
w_data-bklas
w_data-bwtty
w_data-vprsv
w_data-verpr
IN CHARACTER MODE.
APPEND w_data TO i_data.
CLEAR w_data.
ENDIF.
ENDDO.
CLOSE DATASET l_filename.
Error Message while executing
What happened?
At the conversion of a text from codepage '4110' to codepage '4102':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'ZHDI_LOMM_VEHI_MAT_MASS_CREATE' had to be terminated
as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 449. If this number is 0, the second error case, as
mentioned above, has occurred.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught in
procedure "F_DATA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4102' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/interfaces/conversion/pioneer/ddm/data/test_data1.xls'.
(further information about the file: "X 549
24064rw-rw----200812232135082008122307293120081223072931")
Please help me
Thank YouWoah ... perfect guru
but data looks like all junk characters ? its filling with special characters, hashes # and other characters but not with Excel data.. any idea ??
Temesh
Edited by: New2Sap Abap on Dec 24, 2008 6:42 AM -
File from application server-- Email ?
Hi,
I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
For that i had used the following code:
REPORT ZEMAIL_APP_SER_FAIL.
DATA :is_doc_chng TYPE sodocchgi1,
it_objtxt TYPE STANDARD TABLE OF solisti1,
is_objtxt TYPE solisti1,
it_objpack TYPE STANDARD TABLE OF sopcklsti1,
is_objpack TYPE sopcklsti1,
it_objbin TYPE STANDARD TABLE OF solisti1,
is_objbin TYPE solisti1,
it_reclist TYPE STANDARD TABLE OF somlreci1,
is_reclist TYPE somlreci1,
w_lines_tx TYPE i.
** Create Message Body
** Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
** main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
* write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = w_lines_tx.
is_objpack-doc_type = 'CVS'.
is_objpack-OBJ_NAME = 'GIND_EXP'.
is_objpack-Obj_langu = 'E'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'XXX'@'YYY'.COM'.
is_reclist-rec_type = 'A'.
Break-point.
*is_reclist-REC_ID = 'XXX@YYY'.COM'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = is_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack
contents_txt = it_objtxt
receivers = it_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
when i execute this program:
I get the following error msg:
Activation setting not yet maintained
May i know what is the problem?If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?
-
Read Tilda separated file from Application Server
I have a requirement to read a tilda separated file from application server and write a tilda separeted output to application server. Please suggest how to to get data from tilda separated file to internal table ? and also How to create a tilda separated file from internal table to application server.
Hi again,
This some sample code for outputing data on application server with tilda separator.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT. " MESSAGE msg.
IF sy-subrc <> 0.
message i812(LQ).
LEAVE LIST-PROCESSING.
ENDIF.
LOOP AT gs_input INTO wa_input.
CONCATENATE wa_input-wadat_ist
wa_input-sort2
wa_input-name1
wa_input-street
wa_input-region
wa_input-post_code1
wa_input-zzchep
wa_input-vbeln
wa_input-bstkd
wa_input-zfrom
wa_input-zland
wa_input-zccode
wa_input-zrcvd
wa_input-zfref
wa_input-znorc
wa_input-zsepr
wa_input-zvers
wa_input-zlout
wa_input-zinfo
wa_input-zinco
wa_input-zsqal
wa_input-zscod
wa_input-zrqal
wa_input-zeqal
wa_input-zecod
wa_input-zcust
wa_input-ztran INTO g_path SEPARATED BY '~'.
TRANSFER g_path TO p_file.
CLEAR : g_path, wa_input.
ENDLOOP.
CLOSE DATASET p_file.
Hope this will be helpful for you.
Regards,
Vijay -
Open documents/files from Application Server in forms 6i
Hello All,
Our requirement is to open files that are in Application server( We do not want to upload them into database).
Is there a way to open this files from forms 6i.
I am wondering how the "View Output" or View log button works on the concurrent program submission form. Its the doing the same thing i.e pulling the file from Application server and showing up.
Please let me know if anyone has any ideas on how to get this done.
Thanks
SunilI assume you are using Forms 6i in web mode here. Then it is just a URL to the file if you properly map to a directory where you store the files:
web.show_document('http://...../myfile.pdf');
But it also looks like you are using Oracle Apps, so might want to ask it in the e-Business Suite. -
FM to read XML files from Application server in ECC5.0
Hi All,
We need to pick up an XML file from Application server/FTP server. The requirement is to parse the XML file and process it to create material master. SAP provides standard function modules to read XML files.
Now we need to read the XML file contents of MM01 and upload into SAP Data Base through BAPI
I need to know about the Function modules to read XML files from Application Server and also about the FM's that will update the Date base tables with the data obtained form XML files.
Regards
PrathimaParsing XML data:
http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
or alternatively check out ABAP online help for "CALL TRANSFORMATION".
For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
Thomas -
Reading XML File from application server
Hi experts,
My aim is to read a XML file from application server and extract the relevant data from it and process further.
When I am trying to read a XML file from application server it is reading success fully but the problem is that its not reading the last root structure of XML file why is so happening can any body help me?
I am using the following code:
TYPES: BEGIN OF xml_line,
text(256) type x,
END OF xml_line.
DATA: e_file LIKE rlgrap-filename VALUE 'applcatin server path'
OPEN DATASET e_file FOR INPUT IN BINARY MODE.
IF sy-subrc EQ 0.
DO.
READ DATASET e_file INTO wa_item1-text.
IF sy-subrc EQ 0.
APPEND wa_item1 TO gt_item1 .
CLEAR wa_item1.
ELSE.
EXIT.
ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET e_file.
after this i am passing this internal table to "cl_ixml" class to extract the data
but it returning the itab with required value except the last record.
The stream reading the file it self is i thought in complete thats why it is not converting the all values.
Please help me...
Thanks a ton in advance.Hi,
1 Copy Report BCCIIXMLT1
2 (you can change the way of filling internal table xml_table if necessary)
3 you don't need the part between
*-- render the DOM back into an output stream/internal table
and
*-- print the whole DOM tree as a list...
Comment it out or simply delete it
4 Rename form print_node to your liking e.g. process_node
5 In your new form you need three extra variables:
data: attribs type ref to IF_IXML_NAMED_NODE_MAP,
attrib_node type ref to IF_IXML_NODE,
attrib_value type string.
6 After the lines:
when if_ixml_node=>co_node_element.
string = pNode->get_name( ).
Insert:
attribs = pNode->get_attributes( ).
clear attrib_value.
case string.
when ''. "put your XML tag name here
attrib_node = attribs->get_named_item(name = '' ). "put your XML attribute name here
attrib_value = attrib_node->get_value( ).
You can also refer link,
/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
thanks & regards
shreemohan -
Use of Open and close data set in to pick up files from application server
Hi,
As per my earlier posts i m making a programm which will pick excel sheet from application server and make auto PR by bapi and this all process will be handle by background processing (SM36, SM37). My concer is all proces are working fine but my files are not been picked by application server , when run on my own machine everything is working fine.I never used OPENDATA SET command before , so i have no idea how it will be used , can anyone provide me details with my set of codes where it should be used ....
sou_dir_name = 'Y:\Sucess\'.
tar_dir_name = 'Y:\destination\'.
Open dataset sou_dir_name for input in text mode encoding default.
if sy-subrc eq 0.
do.
read dataset sou_dir_name into file_table.
if sy-subrc ne 0.
exit. " end of file.
enddo.
endif.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
DIRECTORY = sou_dir_name
FILTER = '.'
IMPORTING
FILE_COUNT = file_count
DIR_COUNT = dir_count
TABLES
FILE_TABLE = file_table
DIR_TABLE = dir_table
EXCEPTIONS
CNTL_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
ENDIF.
loop at file_table into wa_file_table.
clear : strr , str1 , str2 , str3 .
strr = wa_file_table-PATHNAME .
concatenate sou_dir_name strr into str1 .
concatenate tar_dir_name strr into str2 . " success
concatenate tar_dir_name1 strr into str3 . " failed
FILE = STR1 .
*start-of-selection.
*& Function For Retrieve Data From Excel
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = FILE
i_begin_col = col_start
i_begin_row = row_start
i_end_col = col_end
i_end_row = row_end
tables
intern = excel_bdcdata
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
IF sy-subrc NE 0.
WRITE : / 'File Error'.
EXIT.
ENDIF.
loop at excel_bdcdata.
translate excel_bdcdata to upper case .
move excel_bdcdata-col to it_index.
assign component it_index of structure wa_file to <fs> .
move excel_bdcdata-value to <fs>.
at end of row.
append wa_file to it_file .
clear wa_file.
endat.
endloop.Parsing XML data:
http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
or alternatively check out ABAP online help for "CALL TRANSFORMATION".
For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
Thomas -
File from application server -Read and process and delete the file .
Hi All,
I writing a ZEE program which will read the file from application server(file will be in text delimat format) and moving the data to internal table and uploadind data base.The part which iam facing problem is -
> I hve read the file from application server like below ,
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
Spliting part i having problem .i need to seperate each field which is seperate from tab delimite and pass it into respective fields of internal table .
Second if another file come to the appicaltion server , wether my first file will be there ? or should i need to delete the first file after redaing how should i proceed further ?.
Regards
SRIRAM...
THANKS In ADVANCEHI,
1.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT cl_abap_char_utilities=>horizontal_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
APPEND wa_uploadtxt TO itab.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
2. If the another file get's generated in the application server with same file name then the data in old file get's over written with the new data. You are not required to delete the file.
Maybe you are looking for
-
Last approver of purchase requisition linked to workflow
Hi Guys, Im writting a report to display retrospectively the usernames of the last approvers of a company's purchase requisitions for auditing purposes. After searching the forum I found a way to do this: 1) use SAP_WAPI_WORKITEMS_TO_OBJECT to retrie
-
For developer's point of view which one is better- 10g or 11g
guys please help me out. let me konw from developer's point of view which one is better 11g or 10g. i want to apply for oracle.
-
Move / in a structure that contain 200 fields
The standard RFBIBL00 program accept structure BBSEG which contain at least 300 field. in the input file that i am receiving will contain 18 fields from the table field BSEG. since in the standard program we will not be using BSEG but the structure B
-
No Audio with AVI Files from Digital Camera
Hey, everyone. I'm having A LOT of trouble playing videos (AVI) from my Samsung L730 digital camera. Other AVI's on my computer work just fine. However, the ones from my camera will show only video.....but NO audio in Quicktime. It is the same proble
-
Inserting an Image on mouse clicked HELP
Hi. I', trying to make a Tic tac toe game(if you do not understand please run this programme). The thing I want to happen is: the user clicks over a "sqare" and when mouse is released the image (X or O) appears on that position. I can't get my progra