Error Loading the file from application server

Hi Team,
I'm trying to load the .CSV file from application server and I'm getting the error message.
In the data package
Update to PSA --Green
Transfer Rule -- Green
Update Rule - error ABORT was set in the customer routine 9998
Error 1 in the update
Please help me to provide the solution.
But when I try to load the other files there are no issues. thanks.
Regards,
Senthil

Raj
check the below links, which can helps to solve your issues
Flat file data load
flat file Data loading issue
Mahesh

Similar Messages

Error loading csv file from application server

Hi all,
While uploading a csv file from the application server to psa we are getting the following error,
Error 2 while splitting CSV data record
Message no. RSDS_ACCESS011
Diagnosis
Error 2 occurred while splitting the CSV data record 1
1 = Could not find a closing escape character
2 = Invalid escape character
3 = Conversion error
4 = Other error
System Response
The function was terminated.
Procedure
Check the values of the data separator and escape sign, and try again.
But i've checked the file and the escape sign, data seperator in it also. Everything is fine. The same file we are able to load successfully in quality system.
How to solve this error??
Thanks in advance.

Hi BI consultant:
   Could you please provide more details?
For example:
1.Is your P application server a UNIX flavor? (Solaris, AIX, UX, Linux)
   If yes..
         2. Are you able to see the contents of the file correctly with a "cat" or "vi" command? (at operating system level).
               If no...
                     3. Did you upload the csv flat file to the server via FTP?
                            If yes...
                                 4. Did you use the "binary" or the "ascii" parameter on the FTP command used to upload the file?
Probably you need to upload the CSV file again to your application server and make sure you can se the file contents ("cat" or "vi" command) before trying to execute the InfoPackage.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 3, 2010 11:13 AM

Error in Reading the file from Application Server

Hi,
This Error is regarding one of my interface, the issue is that , the interface reads data from file in bunch suppose 100 records at a time , then processes those records and once finished go for next 100 records .
Noe the error is that , the process takes place till 500 records correctly but when it went to fetch for next 100 i.e fom 501 to 600 it selects only 501 to 583 .
this records has been processed successfully but the job finished there only
but the file contains 788 records
When the same file has been run in other server it ran successfully without such error .
Can you please suggest how to resolve the issue

Hi,
Try to manually download the file from application server using standard transactions, and than check how many records are you able to download from app. server.
I guess there might be something wrong with the format of 583rd record, which makes sap assume that the file has come to an end.
Hope this will help you.
Regards,
Vinit...

Infopackage-Load Many Files from Application Server and later Archive/Move

Hi All..
I have a doubt,   I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
-     How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
-     In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
          p_filename =
          p_subrc = 0.
Thank you for your ideas or recommendations.
Al

Hi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al

Regarding Reading the file from Application Server

Hi,
I am trying to read data from Application Server but due to special characters it is getting dumped out.
US24,Q,Acero (Carbon),AA,0010,0001,01,Ver Mir para dimension#
US24,Q,Acero (Carbon),AA,0010,0002,01,Area rectificada sin da#os ra
US24,Q,Acero (Carbon),AA,0010,0003,01,Ver Mir para dimension#
US24,Q,Acero (Carbon),CD,0010,0001,01,ITPE Soken para verificacion
US24,Q,Acero (Carbon),CD,0010,0010,01,No se permite desprendimiento
US24,Q,Acero (Carbon),CD,0010,0002,01,"Vernier, cinta metrica"#
In the last line it is going into dump due to special character ".
Please suggest.
Thanks
Priyanka.

Hi,
You can check the mode in which you are reading the file
from application server that is
Open Dataset in Binary or Text Mode.
Hope it helps
Regards
Mansi

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Not recognizing # while reading the file from application server

Hi
I am reading a file from application server. While reading into internal table with read statement the last field in each record is filling with hash symbol in the last digit. If I write any if condition with HASH symbol its not going inside the if condition, means its not recognizing as hash may be its internally treating as some other. I need to remove the hash from that field. How I can do that.
Thanks,
kishore

I faced exact situation. Yes, internally its treated as some other special character. What i did was, becuase hash symbol was always coming at the end...i created a dummy field in my internal table so that it will not interfere with my actual data. When i see the data in my internal table, the hash always falls in the last field (dummy) which i will ignore. I could not get solution to remove this hash so i adopted this approach and it worked!!
Hope it helps,
SKJ

Regarding uploading the file from Application Server

I am trying to upload a .csv file to Application Server through CG3Z tcode.
But i am getting dump ad below..
What happened?
    While a text was being converted from code page '4102' to '1100', one
    the following occurred:
    - an character was discovered that could not be represented in one of
    the two code pages;
    - the system established that this conversion is not supported.
    The running ABAP program, 'SAPLC13Z' had to be terminated, since the
    conversion could cause incorrect data to be generated.
    1 characters could not be represented (and thus could not converted).
    If 1 = 0, a second or a different error has occurred.
Please let me know..how can i resolve this??
Thanks
Priyanka

Check if your CSV file is UNICODE encoding.
If CG3Z steel not works you can check on OSS SUPPORT if a note solve your problem.

FM to get the file from application server to presenatation server automati

Hi!
In my upload program I am egtting the error log file onmy application server directly. Is there a function module or a way that in my abap code I can mention to bring the file or transfer the file to the presentation server . As my program is been run in the back ground so I cannot directly get the file on the presenattion server, so I need to bring it back on teh presentation server back to see teh eror log.
I would like my program to do the transfer in background itself so that I can see the error log on a daily basis from my local file .
Thanks
when 'X'.                      "X is application server
*         TRANSLATE p_err USING '\/'." correct slash for unix
      open dataset p_err2 for output in text mode encoding default.
      if sy-subrc = 0.
        loop at t_err into s_nts.
          transfer s_nts to p_err2.
          if sy-subrc ne 0.
            message i010(ad) with p_err2 'Download Failed'.
          endif.
        endloop.
        close dataset p_err2.
      else.
            message i010(ad) with p_err 'dataset could not be found'.
        sy-subrc = -1.             "Maintain error condition
      endif.
*        endif.
      when ' '.                      "Blank is presenation server
        translate p_err using '/\'."correct slash Dos file
        call function 'DOWNLOAD'
          EXPORTING
            filename = p_err
            filetype = 'ASC'   "FTYPE set to DAT in DATA seg
          TABLES
            data_tab = t_err.
        if sy-subrc ne 0.
          message i010(ad) with 'File ' p_err 'cannot be located.'.
          sy-subrc = -1.             "Maintain error condition
          exit.
        endif.
    endcase.
ENDIF.
Thanks

SO , after reading all , I assume that there is no way in which when I run the background job and get a errro file on application server can be retrievd on my presenattion serevr during the background job run. I was thinking that theer might be a functionn module which will convert the application server file into presenttion server file during the program run in background and store it in the location provided.
I was trying to use FM CALL FUNCTION 'C13Z_APPL_TO_FRONT_END' and CALL FUNCTION 'ARCHIVFILE_SERVER_TO_SERVER' but using teh first one asks for source file and destination file name during teh program run and as it runs in background it cannot be provided again and again and teh second one dosent seem to work.
Thanks

Pick & Delte the File from application server...

Dear All,
How to Delete the file(text data - Notepad file) from Application after picking it for process.
regards.

Hi
Use OPEN DATASET, CLOSE DATASET to read the file and DELETE DATASET to delete file after reading it.
DATA: FILE(80).
DATA: T_FILE(1000) OCCURS 0 WITH HEADER LINE.
OPEN DATASET FILE IN TEXT MODE.
IF SY-SUBRC = 0.
    DO.
      READ DATASET FILE INTO T_FILE.
      IF SY-SUBRC <> 0. EXIT. ENDIF.
      APPEND T_FILE.
    ENDDO.
    CLOSE DATASET FILE.
    DELETE DATASET FILE.
ENDIF.
Max

Error in uploading file from Application server

Hi
My scenario is file->XI->Idoc.I am using a senedre file adpator
My adaptar cofiguration is
transport protocol NFS
message protocol file
Adaptor engine integration server
source directory .\ (application server path of XI)
file name invoice.xml
quality of servise exactly once
poll interval 10 sec
proceesing mode test
processing seq by namefile type text
But the problem is adaptor monitoring it is showng that it it polled succesfully with green signal
but in the message montoring it is showing "Canceled with errors"
in the detail list it is showing the error category is XI_J2EE_MESSAGING_SYSTEM
and the error code is CALL_CUSTOMER_ERROR
Any one can help me in this matter?
Thanks
Debraj Roy

Debraj,
in SXMB_MONI, go through the "Trace" header section of the message and find the exact point in which the exception occurs. Paste it here.
At a glance, it seems an RFC call that fails inside the mapping... Do you use JCo & UDF in the mapping to do some lookup/check in R/3?
Let me know.
Alex

Reading all the files from Application Server in a specific folder

Hi,
I want to read all the files present in a folder on Application Server ( AL11 ). My problem is that I do not know the name of the file but I know the folder path where files are present.
I need to go to this folder and pick up all the files present in this folder and then process these files in my program.
Can any one help me in this!
Regards,
Lalit

You can use a call to
C_DIR_READ_START'
and
CALL 'C_DIR_READ_NEXT'
Regards,
John.

Error when loading a flat file from Application server.

Hi,
I am trying to load a flatfile from the application server, and I am getting the message
Error while accessing the application server file
Message no. RSDS_ACCESS002
I checked for notes and found only one:
Note 1033978 - Correction: Loading Unicode files from application server
but we have 19 SP level, and the note says it needs 13 SP level, so I think it would not be of any help.
does anybodie know what to do??
thanks for the help.
Mauricio

Error in accessing while application server file..
when i am trying load the data to psa
when i am taking the file name: text-type file from app server
plz reslove me for this problem??
another question
when i am saving the file with using * in the filename in .CSV file its not saving,
whats the reason????
ASHOK

Error while uploading the file from Allpcation server in LSMW-7th step

Hi Experts,
what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
Thanks in advance,
KSR

Hi
I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
Is there any specific CODE PAGE to be maintained...
Thanks in advance
Oarsk

How to Select the Latest file from Application Server?

Dear All,
I am working on object, which had requirement to Pick the file from application server.
The Application server contain the files in /temp/sms/ directory. The files are having the name Like smsqry_yyyymmddhhmmss.txt and I have to Pick the Latest file (Base on file name for eg. 'smsqry_20060713102333) from that all and after getting the file I have to delete the file from application server.
So How to do this.
Regards

hi,
look function group EPSF-
esp. fm EPS_GET_DIRECTORY_LISTING
if you're looking fo OS-date and time
look here:Re: How do I convert MTIME to date and time?
A.
Message was edited by: Andreas Mann

Error Loading the file from application server

Similar Messages

Maybe you are looking for