Information about Integration Forte-Tivoli.

Hi all,
I already downloaded from the Forté site the document from Geoff
Puterbaugh on Integration with TIVOLI, but, some prospects ask us the
list of experiences and more general information on the subject.
Could you please provide some info on Forté - TIVOLI ?
Any suggestions or comments are most welcome!
Thanks a lot.
Regards,
Sandro Gerardin

If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N

Similar Messages

  • [Fwd: Information about Integration Forte-Tivoli.]

    Hi all,
    I already downloaded from the Forté site the document from Geoff
    Puterbaugh on Integration with TIVOLI, but, some prospects ask us the
    list of experiences and more general information on the subject.
    Could you please provide some info on Forté - TIVOLI ?
    Any suggestions or comments are most welcome!
    Thanks a lot.
    Regards,
    Sandro Gerardin

    Hi vikas and Frank,
    Do you have any information related on How to enable the webservices in the GRC 10 (does NWBC holds the key). if you have any information related to it  please share it with me.
    Thanks and regards,
    keerthi

  • Information about Integration WebDynpro for ABAP and Business-Workflow

    Hi Experts,
    I'm looking for information about
    • Integration WebDynpro for ABAP and Business-Workflow
    Link, documents and books are welcome!
    Thanks
    mishak

    If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
    http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
    There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
    Thanks,
    Prasath N

  • Forté - Tivoli Integration

    Hi Forté experts,Has anybody experienced the
    integration between Tivoli
    and Forté ?
    What we would like to do is to monitoring a Forté
    application using Tivoli.So we would like to be able
    to inquiry Forté Agents
    from Tivoli in order to have the same information
    showed on Forté Environment Console.
    We had a look to the Forté Shareware document related
    to Forte Tivoli integration.
    This document is dated end 1996 so probably in not
    describing the latest integration capabilities between
    Tivoli & Forté.
    The document describes how to execute Forté Fscripts
    and Escripts scripts using Tivoli Task libraries.
    It also describes the use of Tivoli Sentry with 3
    options :
    1) Calling C shell that executes Forté commands and
    send the response to Tivoli via the standard output.
    2) Using Sentry API to communicate with Tivoli (is not
    explaned on the document).
    3) Using Tivoli WASYNC command in order to send
    messages from Forté to Tivoli.
    Looking at Tivoli documentation I found interesting
    information about AMS (Application Management
    Specification).
    This Tivoli utility use an ADF (Application
    Description File) in order to Monitor or Deploy
    external application developed with tools like
    Forté,PowerSoft ..
    I hope somebody around the world has already used this
    new integration feature.
    Any help will be really appreciated.
    ----------------------------------------------------Massimiliano
    Delsante
    O.T. Consulting S.r.l - www.otconsulting.com
    Via della Previdenza Sociale N° 11 - 42100 -
    ReggioEmilia
    Tel. +39 0522 271550 - Fax +39 0522 230710
    Do You Yahoo!?
    Il tuo indirizzo gratis e per sempre yahoo.it su http://mail.yahoo.it

    Hi vikas and Frank,
    Do you have any information related on How to enable the webservices in the GRC 10 (does NWBC holds the key). if you have any information related to it  please share it with me.
    Thanks and regards,
    keerthi

  • Need Information about CTI Integration

    Hi,
    I am new to CTI. I am doing a feasibility study to  integrate our Contact  Centers with our existing Peoplesoft CRM product  so that Agents can take calls through Peoplesoft. I believe that we   need a CTI middleware, CTI Server and a Adapter/Connector to integrate   the Telephony/PBX with Peoplesoft CRM.
    Does Cisco provide any CTI middleware/CTI Server product to  achieve my  goal. Can someone also provide me an approximate cost for  the same. I am  planning to start integrating a small Call center of 30  agents with  Peoplesoft CRM. Based on the Implementation feedback I can  think about  integrating other Call centers.
    I would be grateful if someone can provide me with the necessary information
    Thanks
    Kannan

    http://developer.cisco.com/documents/146485/146641/UCCX%20CTI%20Protocol%20Guide%20701.pdf
    Thanks,
    Anand

  • Information about OID Integrator

    Hi Experts,
    1)I want to fetch data from both Structured ( from DB,files etc) and Unstructured(from RSS,internet forums)  data and then load into RDBMS(any DB )
    Oracle Information Discovery Integrator(OID Integrator)+Oracle Web Acquisition toolkit 3.1 standalone will serve my purpose of loading both Structured and Unstructured data into RDBMS?
    2)Will Oracle Information Discovery Integrator(OID Integrator)+Oracle Web Acquisition toolkit 3.1(addon to OID Integrator)  comes as a separate tool for licensing?
    Regards,
    NN

    check this documentation; check directory configuration settings and particularly its various chapters on Directory Server Admin, Dir Entries Admin, Dir Schema Admin, etc.
    Oracle® Internet Directory Administrator's Guide,
    OID

  • Report with information about release documents in VKM1

    Hello
    I need to know if exists some report that gives me more information about release documents in transaction VKM1. What user releases some document? How many documents a credit account had been release or block in a year or between dates?
    The transaction VKM2 just gives the release date of the document and not the user.
    Where I can find more information?
    Regards
    Daniel Teles

    Hi,
    There is a field to know which account is the parent account, but you can't have others informations from the parent account except the name. In the new R16, you have others field called "Parent Account external unique ID" and "Parent Integration ID". What can I do with this field? Is it possible to display the parent account phone field in the report?
    regards

  • Some random questions about integration features

    Greetings,
    after working for a few weeks with Autovue's ISDK (web server) and having some sucess with its integration with our custom CMS, I have a few random questions about what can be done and what can't be done. So, instead of opening many new threads, I'll post them here together.
    1) Translation. We are localised in Russia, and its translation is incomplete. I have found a tra_en.properties file in AutoVue/bin, and a description about how to create a properties file for custom actions. But no information about how to translate to other languages - and russian translation appears to be packed within the jar of the applet. Is there a clean way to translate, or refine the current translation, so we don't get a mix of russian and english commands in the applet? Because my tries using EXTRABUNDLES have failed, as I don't want to add a bundle for extra actions, but to replace it for existing ones.
    2) Attachments in markups. Markups allow to attach other files, but since our CMS is custom, we only get the option to attach files from our local drives. We did no browse integration with the CMS, as people with different levels of permission will have different access to files there, and we considered unnecessary to provide that level of integration. We are considering to remove this action from the GUI, but before that I'd like to evaluate how hard would it be to generate an upload file action, so the attached file would be stored in the custom CMS and linked to it so the whole thing worked. My guess is "it will be hard and time consuming", so for now, we are considering to delete this feature in our integration.
    3) Is there a way to resize the Open markup dialog? We have several properties displayed, and fit well within a standard screen, but the dialog is small and you have to scroll the table to see all properties.
    Thanks for any assistance with these issues

    As always, thanks for the fast answer, Artash.
    Yes, now I see attachments are stored inside the markup file. The problem is, when I open markup mode for the attachment, since the attachment uses some kind of default access method, my url's from the integration with the background CMS are broken completely. I believe the ideal state here would be to make some kind of inner markup for the attachment, maybe stored within the original markup file along the attached file. Or maybe it works that way, and I need to access it with the default gui action instead of my custom one. If that is the case, is there any way to tell the gui file how to differentiate a standard opened file from an attached one? If so, the issue has solution. If not... Well, then maybe something escapes me.
    Edited by: Jordi Bosch on Apr 6, 2012 12:27 AM

  • Need urgent information about TADM 10 Cource material

    Dear All,
    Kindly provide me some information about TADM 10 cource material. Info in the sense like what all are the topics & subject covered in the cource material.
    If any related notes are there kindly do forward me on [email protected]
    Thanks & regards,
    Harshavardhan.G

    Here is the content of this course.
    Content:
    Fundamentals of SAP Web Application Server (SAP Web AS):
    - Introduction to SAP NetWeaver and the application platform, navigation in SAP systems
    - Architecture of SAP Web Application Server
    Fundamentals of SAP system administration:
    - Starting and stopping an SAP system
    - System configuration options in SAP Web AS ABAP
    User administration, system monitors in SAP Web AS Java and SAP Web AS
    ABAP
    Fundamentals of SAP Web AS Java
    Basic configuration of SAP Web AS Java
    Patching for SAP Web AS Java
    Change management and software logistics for SAP Web AS Java
    Configuration of integrated SAP Internet Transaction Server (SAP ITS) and use of SAP GUI for HTML
    Internet technologies in the SAP environment:
    - SAP ITS, SAP ICM, SAP Web Dispatcher

  • In depth information about SAP SRM

    Hi,
    i was wondering if there is a source or may somebody personally who can answer me some general questions about sap SRM, which go beyon the 10 page 40000feet-white paper of SAP.
    - what is the main difference between MM and SRM
    - how difficult is the migration/upgrade to SRM having a MM in place
    - what standard purchasing processes are provided by SAP SRM
    Thanks for your feedback
    Torsten

    Hi Torsten,
    Indeed, it's quite complicated to answer your questions in some sentences.
    Please check the available document sources, maybe you can help yourselves:
    If you have an access to the service marketplace, see the note 1026369 for useful links. If not, see the following links (for some of them  regisered user is needed):
    - The online help is available at http://help.sap.com -> SAP Business Suite -> SAP Supplier Relationship Mgmt. or http://help.sap.com/content/documentation/erp/docu_sbs_erpsrm.htm
    - Integrated Business Content: https://websmp201.sap-ag.de/ibc ; 
    - Installation And Upgrade Documentation: http://service.sap.com/instguides
    mySAP Business Suite Applications -> mySAP SRM -> mySAP SRM Server 5.0
    Download MasterGuide and scenario-specific instructions.
    Follow this link for detailed understanding of srm business process.
    - Installation and upgrade information is available at http://service.sap.com/srm-inst
    - wiki: https://wiki.sdn.sap.com/wiki/display/SRM This is good starting point.
    - Integrated Business Content for SRM is available at http://service.sap.com/ibc-srm
    - SAP Best Practices are available at http://service.sap.com/bestpractices
    - General product information about SRM is available on the SAP home page: http://www.sap.com/solutions/business-suite/srm/index.epx
    Kind regards,
    Peter

  • NEED INFORMATION ABOUT "MAX_TEST" FUNCTION MODULE

    HI ABAPERS,
                      I need information about "MAX_TEST" function module . this function module is used in 4.6 version , now system have been shifted to 6.0.....here in 6.0 version this function module is not prasent.can any one tell me which new function module we can use in place of this function module, without changing the functionality........
             Thanks in advance
    regards,
    SUNIL

    The module is not very sophisticated. Profficiency in Java or ABAP will be a great bonus here. There are plenty of good materials regarding XI on SDN. I suggest to start with step-by-step guides and master all basic integration scenarios
    http://wiki.sdn.sap.com/wiki/display/XI/Step-by-Step+Guides
    Opportunities in industry are not bad also, cause PI is rather popular among customers. The best thing is that it fits any type of customer's business. Integration is demanded almost everywhere.

  • I also need information about use the ProConnect(r) Integ...

    I also need information about use the ProConnect(r) Integrated KVM 2-Port Switch to connect a Mac G4 and a PC anyone help
    software reviews editor

    I suggest you to go to linksys website & it will give all required information ,,,
    Or you can try this link ....

  • Need information about unicode

    Hello friends,
           I need informatiion about an unicode to change english language in to regional language.Please give me information about same.
    Thanx,
    Rahul Talele

    Hi
    Hope it will help you,.
    Reward if help.
    The Link will be helpful to you.
    Re: Upgrade 4.6 to ECC - What are the responsibilites
    regarding Unicode influence in Standard programs
    Very good document:
    http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
    You need to use the transaction UCCHECK.
    The report documentation is here
    ABAP Unicode Scan Tool UCCHECK
    You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
    Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
    Selection of Objects:
    The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
    PROG Report
    CLAS Class
    FUGR Function groups
    FUGX Function group (with customer include, customer area)
    FUGS Function group (with customer include, SAP area)
    LDBA Logical Database
    CNTX Context
    TYPE Type pool
    INTF Interface
    Only Examine Programs with Non-Activated Unicode Flag
    By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
    Only Objects with TADIR Entry
    By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
    Exclude Packages $*
    By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
    Display Modified SAP Programs Also
    By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
    Maximum Number of Programs:
    To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
    - Call transaction SAMT
    - Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
    For further information refer to documentation for transaction SAMT.
    Displaying Points that Cannot Be Analyzed Statically
    If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
    To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
    Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
    Applikation-Specific Checks
    These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
    View Maintenance
    Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
    UPLOAD/DOWNLOAD
    The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.

  • Need maximum information about Content Management in Weblogic Portal 10.3

    Hi,
    I have worked with Weblogic Portal before, but it's been some time, I do not remember much and I quickly need to find some info.
    We are making a proposal to a customer and have suggested Weblogic Portal.
    I would like to give as much information about the technicalities of the CMS in Weblogic Portal as possible.
    Could you please answer these questions ?
    I am looking for information on the CMS that is integrated in Weblogic Portal 10.3
    I have already checked the available information on the site :
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/cm/introCM.html#wp1067976
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/portlets/development.html
    I would like to find more information, especially regarding these questions :
    What are the portlets that are available by default in Weblogic Portal 10.3 ? I read about the Content Presenter portlets, which display real-time data.
    Are there other portlets like these ?
    How can i manage the documentation in the CMS ? I have several source of data (databases, Lotus repositories ...) : can i load them into the WLP Virtual Content Repository ?
    What about images ? Do i need to work on a special format to handle them in my portlets ?
    Is it possible to load data coming from XML files into the repository so i can display them on the portal ?
    Thanks a lot for helping.

    BulkLoader is described in the docs here:
    http://e-docs.bea.com/wlp/docs102/cm/bulkloader.html
    As far as portlets go, WLP provides lots of facilities for creating your own portlets, to do exactly what you want them to do. It really depends upon what you want to do.
    If you're looking to display images, also take a look at the personalization features like Content Selectors and Placeholders, which can retrieve an image from the CM system.
    If you're looking to iterate over a set of content, take a look at display templates as a means to control the presentation.
    You may be able to use re-portlets from the WLP Admin tools, though I'm not familiar with the details.

  • Information about configuration parameters

    Does anybody know where to find information about these parameters in SXMB_ADM - Integration Engine Configuration?
    - BPE - DISPATCHER - MIN_DURATION_PROCESSING
    - BPE - DISPATCHER - PACKAGES_PER_COMMIT
    Thanks!

    Hi ,
    Please find the below link :
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7
    Also the SAP Notes :
    1058623
    1233380
    Regards,
    Madhusree

Maybe you are looking for