Information in PSA for 0IMFA_1 is missing in infocube
Hello everyone,
I've loaded all the necessary data for 0IMFA_1 through all the nessesary infosources via PSA's, also i've preloaded the 0im_fa_ip_8, 0im_fa_ip_9, and 0im_fa_iq_9 (0im_fa_ip_7 is not required).
Information that i see coming for Budget- for mesures, in this case WBS's is present in the PSA but not in the cube itself. Specifically i miss the resolution of 0VTDETAIL
which enables me to seperate the line for original budget to supplments or returns.
As a result of this the amounts <b>aggregate</b> for every line for different approval years.
I suspect start routine which exist in the update rules of the infosource.
has anybody encountered this?
Thanks in advance for your answers
hi again Adi
check if applicable oss note 723601-0IMFA_1: 0VTDETAIL is not updated correctly.
hope this helps.
Symptom
When you update the 0IMFA_1 InfoCube from the 0CO_OM_OPA_2 and 0CO_OM_WBS_2 InfoSources, the 0VTDETAIL characteristic is not updated.
Other terms
Update rule
Reason and Prerequisites
This is due to an error in the update rules.
Solution
The problem is solved with the following Support Packages:
BW Release 2.1C as of Support Package 29
BW Release 3.0B as of Support Package 21
BW Release 3.20 as of Support Package 13
BW Release 3.30 as of Support Package 6
After you import the relevant Support Package, transfer the affected update rules again from the Content delivered by SAP.
Similar Messages
-
Movement type for production supply missing in warehouse
Gurus,
I am getting this error when i use TC-LP11
movement type for production supply missing in warehouse
What should be done?All I can suggest is checking the master data:
Must have at least one Prod. Supply Area and one control cycle set up.
PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
Created under application menu:
Logistics/LE/Master data/Warehouse/Production Supply (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
(To find out the PSA aka Supply Area from Process Order Display Tx select: Goto \ List \ WM Picklist and scroll to right)
A Control Cycle defines for a given material, Plant and PSA:
which WHS to get the material from
which interim storage type to take it to
which bin to place it in (can be dynamic for pick parts)
Logistics/LE/WM
Master data/Control cycle record/Create
Regards,
Nick -
OTO information not complete for non ABAP instance of system &1 in SMSY
Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban HartzsteinHello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein -
RE: Application component is BLANK in PSA for 2LIS_03_UM
User perform settlement thru K088. I performed RSA3 to check the data. The application component and transaction key is filled with value.
I checked the BI prod and look into the PSA for the same accounting document. Here, the application component is missing and so is the transaction key. Becuase of it, there is no update on the revaluation to the SOH value.
Can some one tell me why it is happening like that.?
I did a similiar check on my DR system (copy of LIVE data) and does a similiar operation and extract it to my development BI box.
In this setup, both the Dr and BI development shows that the application component is filled. so is the transaction key.
Is there some patches missing in my SAP PROD.box?
ByeHi,
Please activate the process keys.
1. select industry sector in T.CODE: MCB_( process keys will be activated)
2. select NDI and BW options in TCODE: BF11.
after that recheck it again
Best Regards,
M.H.REDDY -
Export for excel - images missing
Hello, I built a long list with images and text cells in "nummbers". (A museums exhibit list.) Now I have to export it as an excel file, because my colleagues do not use "numbers" but have to add some informations. Unfortunately all images are missing in the exported file! What can I do?
Thanx, VeraHi VeraF72,
Welcome to Number '08 discussions.
By performing the following simple test gave me the answer to your question. Here's what I did:
1. Created a Numbers worksheet putting a picture into a text box.
2. Put a picture into a cell.
3. Export as Excel I received the following message: Couldn't export image fills because Excel doesn't support them.
Interestingly the picture within the Text box came across as it should.
These Discussions are enduser helping enduser, not Apple employees answering questions. Apple provides these discussion forums for endusers however, Apple neither monitors nor engages in discussions. Enduser such as yourself when they have extra time answer questions.
Again, welcome to Numbers '08 Discussions, have fun here.
Cordially,
RicD -
Flash file for hierarchy Visualisation missing
Hi Guys,
Am getting this error: Flash file for hierarchy Visualisation missing meanwhile have installed the related ABAP Add-on EmbOrgCh 605, have activated the graphical hierarchy visualization, and the Business Function HCM_PD_UI_1.
I also cant seem to find the service in transaction sicf for NAKISA_ORGCHART
Ant tips on this?You can check the OADP structure and ensure correct evaluation paths are correctly assigned!
Organizational Chart Visualization and the Object and Data Provider (OADP)
SAP provides a default OADP-based implementation class in the Check Standard Organizational Chart Configuration system table. For more information, see Customizing for Integration with Other mySAP.com Components, under Business Packages / Functional Packages Manager Self-Service (mySAP ERP) u2192 Organizational Chart Visualization .
http://help.sap.com/erp2005_ehp_05/helpdata/en/40/0f88eb6ff448aa8597211c15a5a653/frameset.htm -
I keep getting a pop up window saying that whatever is needed for itunes to burn a CD for me is missing. How do I get it without having my entire library erased?
Hello,
I am having problems copying my music to a cd, its stating disc recording not found. Please how can this be fixed. I have uninstall and reinstall several times.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Hewlett-Packard 310-1126
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0027B2E0106D35F0
Current user is not an administrator.
The current local date and time is 2013-01-31 18:45:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4270
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel. -
A PDF document with information about activation for CS6 software
Here's a PDF document with information about activation for CS6 software.
I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.
-
when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.
Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN -
I received an email this am telling me I was charged for a purchase I made of .99 this am. I did not purchase anything. I contacted PayPay and was informed it was for a recurring monthly .99 fee..I don't know what that is and don't want it. What is it? PayPal cancelled any further payments for this. I was informed I needed to request refund from ITunes. I did that. Why was I charged a .99 recurring fee? I purchased, or thought I did, an app called "Appzilla2" on Jan 10 for .99 cents. Does this mean I must pay .99/monthly to use it? If so, please cancel the appzilla.
We are itunes users just like you. We cannot cancel anything.
Look at your purchase history and see what the charge is for. Contact itunes support if need be. -
"buffer too small for string or missing null byte" inserting CR in excel
I have created a Crystal Report based on below stored procedure.
DELIMITER $$
DROP PROCEDURE IF EXISTS `ww_test`.`PRD_Data_sp` $$
CREATE PROCEDURE `ww_test`.`PRD_Data_sp` (in cyear int, in cmonth int, in groupby varchar(20), in Inv_type varchar(4))
BEGIN
select
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END ,
sum(p.QTYSAM),
sum(p.CASESSOLD),
sum(p.SOLDDOL)
from ww_test.prd_data p
where (month(p.FKDAT)=cmonth and year(p.FKDAT)=cyear) and
((p.FKART) is null or not(p.FKART in ("FAZ","ZMBB","FAS",Inv_Type))) and
((p.AUART) is null or not(p.AUART in ("ZMBB")))
Group by
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END
Order by
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END;
END $$
DELIMITER ;
I have used Add Command to create report based on this.
call ww_test.prd_data_sp({?Year},{?Month},{?GroupBy},{?InvType});
I am able to refresh the report in crystal and as well in Infoview without any problem.
But when i try to insert this report in Excel using Live Office it gives me error. I able to insert other crystal reports without any problem.
An error occurred while opening the report. The report does not exist; you have insufficient rights to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO 02010)
Failed to open report (LO 26619)
Cannot open report document
Buffer too small for string or missing null byte.
can anyone suggest where i am going wrong? Any input is appreciated.
Crystal Reports 2008
Live Office XI 3.1
BOEdge XI 3.1
Xcelsius 2008
Thanks ,
MadhaviWith the CurrentValue method
Crpt.ParamFields[3].CurrentValue := memo1.Text;
Is there another solution ? -
I was trying to create a text alert. I was calling following in jsp
email.setContactPointPurpose(myLookUpCode); //say XXMY_SMS_SHIP
PartyManager.createEmail(email, ApiConstant.CONTACT_POINT);
Getting following exception:
Error in saving customer information.
Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.
Error trace:
oracle.apps.ibe.customer.CustomerException: Error in saving customer information. at oracle.apps.ibe.tcav2.Email.create(Email.java:187) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Caused by: oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) ... 11 more Error in saving customer information. oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.Tried this but it is giving the below error
APP-FND-01242: Cannot read value from field PER_ASSIGNMENT_ID
Cause: The field PER_ASSIGNMENT_ID could not be located or read.
Action: This error is normally the result of an incorrectly-entered field name string in a trigger, or a field name string that does not uniquely specify a field in your form. Correct your trigger logic to precisely specify a valid field. -
RPC request to the Microsoft Exchange Information Store service for log truncation
Hello all
Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
the file. Also log files are not being flushed
Bulls on ParadeHello,
Please verify backup software.
Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
failed state, please restart the Exchange replication service and then check the status again.
Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
check configuration information for MAPI network and Replication Network.
If the above configuration information is ok, please check if there are other related errors in application log.
Cara Chen
TechNet Community Support -
Grouping to display null values for all the missing dates
Hi SAP,
I am trying to display '0.00' value for all the missing dates in my crystal reports as follows:
17-Jan-14 40.00
18-Jan-14 0.00
19-Jan-14 0.00
20-Jan-14 80.00
However, my crystal report is showing as follows:
17-Jan-14 40.00
18-Jan-14 0.00
19-Jan-14
20-Jan-14 80.00
The missing dates with no data are group together and my '0.00' value is not. Kindly advise me the solution. The formula is shown as per attached.
Thank you.
Regards.Hi,
Thanks for your reply.
Fyi, I am using a formula field in crystal report to display "0.00" for days in between as follows:
whileprintingrecords;
if Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy') = "" then "" else "0.00"
There is another formula field in crystal report to display the missing dates in between as follows:
whileprintingrecords;
Days_Between({Command.DocDate},next({Command.DocDate}),'dd-MMM-yy')
Below is my report custom functions:
Function Days_Between (datefield as datetime, nextdatefield as datetime, format as string)
' This function is only used to display what data is missing within a specified date range...output type is text
dim thisdate as date
dim nextdate as date
dim output as string 'output is the text display
dim daysbetween as number
dim looptimes as number
looptimes = 0
daysbetween = 0
output = ""
thisdate = datevalue(datefield) + 1
nextdate = datevalue(nextdatefield)
if nextdate - thisdate > 1 then daysbetween = nextdate - thisdate else daysbetween = 1
do
if nextdate - thisdate > 1 _
then output = output + totext(thisdate, format) + chr(10) _
else _
if nextdate - thisdate > 0 _
then output = output + totext(thisdate, format)
looptimes = looptimes + 1
thisdate = thisdate + 1
loop until looptimes = daysbetween
Days_Between = output
End Function
The issue arise when when there is more than one missing dates in between but the null values ("0.00") displayed is only for the first missing dates and not for all the missing dates.
Regards,
Ting Wei -
I upgraded to the newest version of Mozilla Firefox, and once it was installed and ready for use, my Identity Safe feature for Norton is missing. I do not know how to get it back in the toolbar area. So I retro-graded back to the 3.6-16 version of Firefox, and wallah it's there even the updated version too. So why doesn't my Norton Identity Safe appear with the new version????
Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles
Maybe you are looking for
-
Issue while deploying Agentry application on local SMP server
Hello Experts, I have deployed a customized SAPWM application on the SMP 2.3 server. I am referring to the tutorial maintained at the following URL :http://scn.sap.com/docs/DOC-43353 After deployment, the status of the application is shown as "runnin
-
Best practice for default values in EO
I have and entity called AUTH_USER (a user table) within it has 2 TIMESTAMP WITH TIME ZONE columns like this ...: EFF_DATE TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT current_timestamp, TERM_DATE TIMESTAMP WITH TIME ZONE Notice EFF_DATE has a default c
-
This is a problem that has only cropped up in the last few years. I believe it began in the summer of last year. My audio tends to distort at random moments, sometimes worse than others. It sounds sort of like what a CD would sound like that had scra
-
Hi folks. My macbook is now about 1.5 years old. Beside the fact, that the screen slowly starts to crack at the hinges, my Power Supply Unit is now broke. It just doesn't charge the battery anymore. Can't be the battery itself and with another Power
-
Hi All, Can you assist us on how the below requirement can be achieved in SAP. For specific document types, the user must not be able to post the JV, if the total amount of the document is more than specified amount limit , say 10K (local currency).