Inhouse Cash : interest scale posting date and value date

Hello,
We would like to configure the posting of the calculated interests at month end as follows:
calculation period : from first calendar date of the month (included) until last calendar date of the month (also included !)
posting date = last calendar date of the month
value date = first calendar date of the next month
My understanding is that the posting date of F991 is driven by F9L4. How can I make sure that valuedate of the payment item generated by T-code F991 (mass balancing) = F9L4 date + 1 calendar day?
Thank you very much for your suggestions.
Carl

I agree that you can influence the value date as compared to the posting date,
but that is not the key issue.
Key is how to ensure that both the interest calculation end date AND the posting date be equal to the last calendar date of the month?
The system seems to look at what is stored in the account balancing tab of F9K3 and if you have "31" stored there, the system seems to calculate until the 30th of the month (for months of 31 days, obviously).
I can however not put in F9K3 "1" (first day of the month), because then I will be unable to trigger the interest scales (F991) with a posting date 31st of the previous month, because in order to trigger F991 the date in F9L4 (which is the posting date of the interest scales) must be equal to or bigger than the date stored in F9K3 (next balancing date, which would be equal to 1st of the next month !
So, It looks I am running in circles.....
Any solution for this?
Thx,
Carl

Similar Messages

Posting Date, Document Date and Due Date as same

Hi All
I would like to make Posing date , Document Date and Due date as same
The movement i enter Posting date it should automatically carry the same value to Due date and Document date field . How can i make it
Regards
Rashid

Dear Gordon
Thanks, it is working for Marketing documents,
I would like to have the same for JE and JV
Regards
Rashid

Posting not possible (Value date earlier than capitalization date)

Hello , we are getting the error shown below. I'am not sure where to go to fix this can any offer any advice.
Thank you
Posting not possible (Value date earlier than capitalization date)
Message no. AA 322
Diagnosis
Asset 000000040048 0000 was first capitalized on 20080831.
You cannot post to an asset that was not yet capitalized.
Procedure
You have the following options:
Change the asset value date of your posting.
Capitalize the asset by posting an acquisition.

Generally this message will come , if you have created a asset with a capitalization date say 31/08/2008 and you are settling a Internal order for last period say 07 on with a posting date earlier than capitalization date , say 15/08/2008.
The System will not allow you to post because the value date cannot be earlier than capitalization date.
Change the value date to later than capitalization date and post.

Goods Receipt and Goods Issue - Posting Date and Document Date Problem

Hi All,
I was using SDK to build own add on to insert Posting Date and Document Date under Inventory> Inventory Transactions> Goods Receipt and Inventory> Inventory Transactions> Goods Issue, but the UI Screen Posting Date and Document Date shown current date.
My SAP Business One version was 2007A SP00 PL42 and alreadly upgrade to SP05.
End up result still the same.
Is there someone can help me?
Thanks you.
Best Regards,
danny

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

Invoice verification Invoice date,Posting date and Baseline Date

Hi Sap Gurus
Pls Tell Me in detail what Dates should be entered at MIRO transaction,
Invoice date,Posting date and Baseline Date
i presumed that the date on the Invoice slip will be Invoice date,
But in the Invoice the Date is very long back, say a month Older,
the month of Posting as Posting date, but any posting Date made in MIRO will be Paid after 2 or 3 months so in this case what should be the Posting date.
at Base line date in the present company Senario the Discount on Vendor payment is literally valid for all the time , say
In Invoice if the condition is 10% discount if paid in 30 days is given.
but in actual sense the Vendor is paid 10% less even if he is paid after 4 or 6 months also, so in this case what should be the Entry in Baseline date
another senario is the vendor has sent only one Invoice for 2 POs how can this be accomadated in SAP
Pls suggest its Urgent,
Age may have a Bar, But Points No Bar
Thanks and Regards
Sathish

Hi
LIV is nothing but You are getting Invoice from the Vendor for your PO   and GR.....and you are checking the Invoice for Price, Qty,Amount etc. by refering the PO and posting the Invoice...
Invoice Date :
           The date of Vendor' Invoice...ie) Date at which the vendor Raised the invoice for his supply against your PO...
Posting Date :
   The Date at which you actually Verifying Vendor's Invoice and doing the Posting...
base line date :
    Generally the Posting Date...
The Imp. of Baseline date is for eg)
If in the Payment Terms if some conditions are maintained like say
10% Discount for Payment With in 30 days, if
PO created on 01.11.2007.
GR done at 10.11.2007.
Invoice slip Received at 30.11.2007 but having the Date on it as 20.11.2007...
So as per your terms you will get 10% Discount if you make the payment on or 20.12.07....
Here if you keep inv. Date: 20.11.2007 and Posting Date : 30.11.2007 and Baseline Date as 30.11.2007 ( you cannot maintain baseline date earlier than Posting date)....even though as per terms the you are eligible for discount if you make the payment on or before 20.11.2007.....as per the system you are still eligible to get the Discount if you make payment on or 30.12.2007( since you have maintained baseline date as 30.11.2007)...
this way Baseline date is Importane...
Generally we use to maintain always Posting Date as Baseline date....
It is advantageous..
Reward if useful
regards
S.Baskaran

Difference between doc date,posting date and invoice date

hi bw guys
can someone give a brief on the difference between doc date,posting date and invoice date.and the invidual definitions
thank you

Hi,
Posting Date: Date which is used when entering the document in Financial Accounting or Controlling. The posting date can differ from both the entry date and the doc date.
Document Date: The document date is the date on which the original document was issued. Ex: Inv date, Bill date etc.,
Invoice Date : Usually the date when goods are shipped. Payment dates are set relative to the invoice date.
-Vikram

Post date and due date

Hi all,
can any tell me what you mean by 'posting date' and 'net due date' and' clearing date'?
what is the difference between them?
Table is-BSID
BUDAT-posting date
ZFBDT-Baseline date for due date calculation
AUGDT-clearing date.
thank u
sunny.

BUDAT-posting date
-> to determine the book-period (bkpf-monat)
ZFBDT-Baseline date for due date calculation
-> determine date when an obligation becomes due
due date = zfbdt + bsik-zbd1t (or ZBD2t or ZBD3t)
AUGDT-clearing date
-> date when open-item becomes a cleared item
by payment or reversal or...
A.

Posting Date and Billing Date.

Hi Experts,
I am working on an IS-U project at the moment.
Could anyone please let me know what is the difference between Posting Date and Billing Date?
Thanks in Advance.
Regards,
Chandu.

Hi,
<b>Posting Date:</b> The date on which a transaction in SAP will be posted to the appropriate accounts. SAP will default this field to be the current date, but changes are allowed. For items to be posted in a future or past period, you must enter the posting date.
<b>Billing Date:</b> Billing date from - Date the billing began and Billing Date To - The default is the last date of the current month.
Hope this helps.
PB

MIRO - Posting Date and Document Date

Dear Gurus,
I have a query regarding Posting date and Document Date of Invoice Document.
I want to keep and restrict user to keep Posting Date and Document date same (current date) and want to restrict user from changing posting date, as i want to kep posting date and document date as same. Please suggest if there is any exit or any control i can implement in order to achieve this.
thanks & regards,
Prashant Rathore.

Hi
You can create a new Screen / transcation variant, in which the posting date and document date will have displau as field status.
Regards

Regarding : Material document data and PO data do not match (Plant)

Hi Gurus,
Please go through this BAPI program.
While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
DATA: BEGIN OF it_itab OCCURS 100,
      docdate(10),
      postdate(10),
      mvt_type(3), "Movement Type
      plant(4), "Plant
      lgort(4),
      pur_doc(10), "Purchase Document No
      po_item(3), "Purchase Document Item No
      material(18), "Material Number
     delnote(16),
      erfmg(13),
      uom(3),
     lfmng(13), "Quantity
      batch(10) TYPE c,
      vfdat TYPE vfdat,
      END OF it_itab.
DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01      INITIAL SIZE 100,
      it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code         INITIAL SIZE 100,
      it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create INITIAL SIZE 100.
DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
      wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
      wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
DATA: w_mat_doc TYPE bapi2017_gm_head_ret-mat_doc,
      w_year     TYPE bapi2017_gm_head_ret-doc_year.
DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF it_errmsg_goodsmvt.
DATA : obj_type LIKE bapiache09-obj_type,
       obj_key LIKE bapiache09-obj_key,
       obj_sys LIKE bapiache09-obj_sys.
DATA: v_date1 TYPE sy-datum.
DATA: v_date2 TYPE sy-datum.
DATA: w_lines TYPE i.
DATA: errflag.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      field_name = 'P_FILE'
    IMPORTING
      file_name = p_file.
Start-of-selection processing
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = i_excel
      i_filename           = p_file
    TABLES
      i_tab_converted_data = it_itab[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_itab.
    REFRESH it_goodsmvt_head.
    REFRESH it_goodsmvt_item.
    CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
    CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
    wa_goodsmvt_head-pstng_date = v_date2.
    wa_goodsmvt_head-doc_date   = v_date1.
   wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
wa_goodsmvt_head-pr_uname   = sy-uname.
    APPEND wa_goodsmvt_head TO it_goodsmvt_head.
Maintain it_goodsmvt_code
    wa_goodsmvt_code-gm_code    = '04'.
Maintain it_goodsmvt_item
*LOOP AT it_itab.
IF wa_goodsmvt_item-po_number IS INITIAL.
    wa_goodsmvt_item-po_number    = it_itab-pur_doc.
    wa_goodsmvt_item-move_type    = it_itab-mvt_type.
    wa_goodsmvt_item-MOVE_PLANT      = it_itab-plant.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = it_itab-material
      IMPORTING
        output = it_itab-material.
    wa_goodsmvt_item-material     = it_itab-material.
    wa_goodsmvt_item-stge_loc     = it_itab-lgort.
    wa_goodsmvt_item-po_item      = it_itab-po_item.
    wa_goodsmvt_item-entry_qnt    = it_itab-erfmg.
    wa_goodsmvt_item-ENTRY_UOM_ISO    = it_itab-uom.
   wa_goodsmvt_item-po_pr_qnt    = it_itab-lfmng.
    wa_goodsmvt_item-batch        = it_itab-batch.
    wa_goodsmvt_item-expirydate   = it_itab-vfdat.
   wa_goodsmvt_item-NO_MORE_GR   = 'X'.
    wa_goodsmvt_item-mvt_ind      = 'B'.
    APPEND wa_goodsmvt_item TO it_goodsmvt_item.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header = wa_goodsmvt_head
        goodsmvt_code    = wa_goodsmvt_code
      IMPORTING
        materialdocument = w_mat_doc
      TABLES
        goodsmvt_item    = it_goodsmvt_item
        return           = it_errmsg_goodsmvt.
Process of commit work
    IF it_goodsmvt_head[] IS NOT INITIAL.
      DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
    ENDIF.
    IF it_goodsmvt_item[] IS NOT INITIAL.
      DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    IMPORTING
    RETURN        =
      CLEAR errflag.
      READ TABLE it_errmsg_goodsmvt INDEX 1.
      IF it_errmsg_goodsmvt-type EQ 'E'.
        WRITE:/'Error in function', it_errmsg_goodsmvt-message.
        errflag = 'X'.
      ELSE.
        WRITE:/ it_errmsg_goodsmvt-message.
      ENDIF.
      IF errflag IS INITIAL.
        COMMIT WORK AND WAIT.
        IF sy-subrc NE 0.
          WRITE:/ 'Error in updating'.
          EXIT.
        ELSE.
          WRITE:/ 'Material Document created successfully and the Document Number for the Material',
                  wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.

Hey,
Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
Mine is solved....
Thanks

Updating start date and end date at header level for a contract

As per the requirement I have to create a contract and assign the start date and end date to the contract.
I am using BAPI_CONTRACT_CREATEFROMDATA for creating a contract. I am assigning value for start date and end date for header data of contract in fields
-CT_VALID_F and CT_VALID_T of CONTRACT_HEADER_IN import parameter and also setting the corresponding indicator in CONTRACT_HEADER_INX parameter.
The BAPI executes successfully and does not return any error but when I check the start date and end date for contract in va43 the values are not assigned.
I also want to update the start date and end date for contract in other case for which I am using BAPI_CUSTOMERCONTRACT_CHANGE and passing date values to the same fields as those create but it give me an error while executing. The error is as follows:
Field 'GUEEN' cannot be changed, VBAKKOM 2000000162 ready for input.
Can anyone suggest what can be done for update the date values?
Thanks in advance.
Komal

So are we... The BAPI BAPI_CONTRACT_CREATE has the following importing parameters:
HEADER     TYPE     BAPIMEOUTHEADER
HEADERX     TYPE     BAPIMEOUTHEADERX
VENDOR_ADDRESS     TYPE     BAPIMEOUTADDRVENDOR
TESTRUN     TYPE     BAPIFLAG-BAPIFLAG
TECHNICAL_DATA     TYPE     BAPIMEOUTTECH
Change the HEADER and HEADERX parameters as I have indicated in my first post.
Regards,
John.

Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Rev

it's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7

To get first date and end date after entering any month and year

Hi,
I need to to get first date and end date of a month and year in yyyyMMdd format. I am reading month and year from a properties file. But I don't know how to get the first date and End date in given format. The properties file gives me just text. But I don't know how to get the date format using this. I need this urgently. Can anyone help me to get code for this?
I am reading the fields as,
Properties props = new Properties();
props.load(new FileInputStream("AnyMonthVolume.properties"));
String date_month = props.getProperty("date_month");
String date_year = props.getProperty("date_year");
Thanks.

I know this has been posted a while ago but incase someone looking for it, here is the code to get the end of current month date.
Calendar cal = Calendar.getInstance();
     cal.setTime(new java.util.Date());
     cal.set(Calendar.DATE, 1); //set the date to start of month
     cal.add(Calendar.MONTH,1);
     cal.add(Calendar.DATE,-1);
System.out.println(cal.getTime());

Status 51 material document data and po data do not match(vendor)

i am using we19 to try an inbound idoc mbgmcr(receipt for po)
i put in gm_code 01
movement indicator B(goods receipt for po)
vendor 3815
PO 4500015241
PO Order Item 00030
Movement type 101
qty in unit of entry 1
iso code unit of measurement pc
on the po screen i see the po item and qty to be delivered is 75
when i run the inbound idoc i get
status 51 material document data and po data do not match(vendor) but as i say on the po inquiry screen i see the po vendor item with 75 to be delivered
what am i missing????????????????

thank you
i put in the leading zeros and got rid of that problem
now i am getting status 51
posting only possible in 2004/07 and 2004/06
but in the posting date i use 07/02/2004 i have tried several dates in the period but get the same error
any ideas?
thanks you

Mass change of pricing date and billing date in credit memo request

Hi,
Can i change the billing date pricing date on credit memo request docs using MASS transaction?
If i enter the regular sales order number it prompts me to change the value but if i enter the credit memo request doc number,the message "No data meets the selection criteria" is displayed.I also checked with IDES ,message is the same
Is there any different way to do mass change for credit memo requests or am i missing something here.
Please Suggest
Thanks
Abhilash Nayak

Hi,
Go to the transaction code MASS and enter the OBJECT TYPE as BUS2032 and enter
It will lead you to the next screen where you can find the Table and Field TABS
Select the SALES ORDER HEADER DATA and choose the fields data and choose the fields PRICING DATE and BILLING DATE and execute
In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
Key in all the documents and execute
Now change the date as per your requirement and check the effect
regards,
santosh

Inhouse Cash : interest scale posting date and value date

Similar Messages

Maybe you are looking for