Initialize array vs array constant
j'ai besoin d'un tableau initialisé.
de ces 2 options:
- la fonction initialize array
- une constante tableau
quelle est la meilleure ? ... et surtout pourquoi.
en terme de performance, de gestion mémoire (ou autres paramètres)
Je me doute que si la fonction "initialize array" a été créée ... il y a sans aucun doute une raison
mais quelle est-elle ? ... par rapport à l'utilisation d'une "constante tableau".
merci à tous.
edit:
la fonction "initialize array" permet (en effet) de fixer dynamiquement la taille,
serait-ce le "pourquoi" de son existence ?
perso, j'utilise assez fréquemment la fonction "initialize array" dans les cas où je connais (à l'avance) la taille de mon tableau,
ou plus précisément ... quand je connais la taille "maximum" de mon tableau.
J'utilise toujours "initialize array" conjointement avec les fonctions "replace array subset" et "reshape array".
comme ceci par exemple :
je préfère de loin cette méthode plutôt que d'utiliser la fonction "build array" ... ou un tunnel d'indexation.
C'est un peu plus de code, mais LV connait la taille du tableau dès la compilation ... et ça, c'est plus de vitesse.
De plus ... (je n'ai pas vérifié) ... j'ai lu que le tunnel d'indexation était "relativement" lent. (et encore d'avantange avec le tunnel indexé conditionnel)
Je ne fais pas d'acquisition, mais je pense que ce système n'est pas incompatible avec un code d'acquisition.
Un acquisition se passe pendant un temps "fini", on connait (en principe) la fréquence d'échantillonnage,
je ne vois donc pas d'interdiction de "prévoir" dès le début un tableau de taille connue.
Mais ... je ne suis pas un spécialiste de l'acquisition.
initialiser un talbeau 2D d'une taille de 20*5 avec la valeur 0 doit prendre moins de mémoire que d' initialiser un tableau de la même taille avec la valeur 1000
là ... queneni ... initialiser un tableau x avec la valeur 0 ou 1000 occupe exactement le même espace mémoire.
Les données se trouvent sur 32bits ... et notre mémoire centrale se moque de savoir si la valeur mémorisée est x ou y ... c'est toujours 32bits.
1000 x U32, c'est 1000 x (4 octets) = 4000 octets dans tous les cas.
Pour conclure, je dirais que la fonction "initialiser un tableau" ne sert qu'aux cas particuliers où l'on doit donner la même valeur pour un tableau
avis pertinent.
perso, je dirai que "initialize array" est utile quand on connait à l'avance la taille ou la taille maximum d'un tableau.
mais ta vue des choses est intéressante.
merci Kaleck0 pour ton intervention.
Les discussions "de fond" sont toujours très intéressantes.
Similar Messages
-
Xerces SAX parser don`t initialize a characters array
Xerces SAX parser don`t initialize a characters array from characters() method in DefaultHandler.
I use jdk 1.5.12.
For value "22-11-2009" variables start=1991, length=9.
Result: "22-11-200"My handler:
package com.epam.xmltask.parsers;
import com.epam.xmltask.model.Category;
import com.epam.xmltask.model.Goods;
import com.epam.xmltask.model.Products;
import com.epam.xmltask.model.Subcategory;
import com.epam.xmltask.utils.Constants;
import com.epam.xmltask.utils.DateConverter;
import java.text.ParseException;
import java.util.Date;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.ErrorHandler;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.xml.sax.helpers.DefaultHandler;
public class SAXProductsParser extends DefaultHandler implements IProductsParser {
private Logger logger = null;
private SAXParser parser = null;
private ErrorHandler errorHandler = null;
private Products products = null;
private Category category = null;
private Subcategory subcategory = null;
private Goods goods = null;
private String currentField = Constants.EMPTY_STRING;
protected Logger getLogger() {
if (logger == null) {
logger = Logger.getLogger(SAXProductsParser.class.getName());
return logger;
protected SAXParser getParser() throws Exception {
if (parser == null) {
try {
SAXParserFactory parserFactory = SAXParserFactory.newInstance();
parserFactory.setNamespaceAware(true);
parserFactory.setValidating(true);
parser = parserFactory.newSAXParser();
parser.setProperty(Constants.SCHEMA_LANGUAGE, Constants.XML_SCHEMA);
} catch (Exception ex) {
getLogger().log(Level.SEVERE, null, ex);
throw ex;
return parser;
public ErrorHandler getErrorHandler() {
if (errorHandler == null) {
errorHandler = new ProductsErrorHandler();
return errorHandler;
public Products getProducts(String uri) throws Exception {
try {
products = new Products();
getParser().parse(uri, this);
return products;
} catch (Exception ex) {
getLogger().log(Level.SEVERE, null, ex);
throw ex;
@Override
public void startElement(String uri, String localName,
String qName, Attributes attributes) {
if (Constants.CATEGORY.equals(qName)) {
String name = attributes.getValue(Constants.NAME);
category = new Category(name);
} else if (Constants.SUBCATEGORY.equals(qName)) {
String name = attributes.getValue(Constants.NAME);
subcategory = new Subcategory(name);
} else if (Constants.GOODS.equals(qName)) {
String name = attributes.getValue(Constants.NAME);
goods = new Goods(name);
} else if (Constants.NOT_IN_STOCK.equals(qName)) {
goods.setIsInStock(false);
} else {
currentField = qName;
@Override
public void endElement(String uri, String localName, String qName) {
if (Constants.CATEGORY.equals(qName)) {
products.addCategory(category);
category = null;
} else if (Constants.SUBCATEGORY.equals(qName)) {
category.addSubcategory(subcategory);
subcategory = null;
} else if (Constants.GOODS.equals(qName)) {
subcategory.addGoods(goods);
goods = null;
} else {
currentField = Constants.EMPTY_STRING;
@Override
public void characters(char[] chars, int start, int length) throws SAXException {
String field = new String(chars, start, length).trim();
if (goods != null) {
if (Constants.PRODUSER.equals(currentField)) {
goods.setProducer(field);
} else if (Constants.MODEL.equals(currentField)) {
goods.setModel(field);
} else if (Constants.DATE_OF_ISSUE.equals(currentField)) {
Date date = null;
try {
date = DateConverter.getConvertedDate(field);
} catch (ParseException ex) {
getLogger().log(Level.SEVERE, null, ex);
throw new SAXException(ex);
goods.setDateOfIssue(date);
} else if (Constants.COLOR.equals(currentField)) {
goods.setColor(field);
} else if (Constants.PRICE.equals(currentField)) {
Float price = Float.valueOf(field);
goods.setPrice(price);
@Override
public void error(SAXParseException ex) throws SAXException {
getErrorHandler().error(ex);
@Override
public void fatalError(SAXParseException ex) throws SAXException {
getErrorHandler().fatalError(ex);
@Override
public void warning(SAXParseException ex) throws SAXException {
getErrorHandler().warning(ex);
} -
How to declare and initialize a STRING ARRAY (assign strings to array elements)
How to declare and initialize a STRING ARRAY (assign desired strings to elements of an array, for example "abc", "def", "ghi", "jkl", etc.) in LabVIEW? I saw a "string array" block in help, but could not find it in the function palette. Does a spreadsheet string have to be in a file (or can it be in a string constant block)? Thank you.
Hi,
you can do it in several ways:
1. Direct way: Create string array control on front panel and type strings in its elements
2. Programmatically 1: Create string array indicator (or local variable of control), right click on it in block diagram, select "Create constant" from drop down menu. The array constant will appear. Now type values in this constant's strings
3. Programmatically 1: Use "Build array", "Replace array subset", "Insert into array" or "Initialize array" functions from "Functions->Array" palette.
And of course you can combine all of these methods.
Good luck.
Oleg Chutko. -
Child tag initializer for type 'Array' may not be empty?error.
hey,
I imported this file from illustrator into catalyst. WE assume the error is caused by the filters tags but we can't delete them in the code view. The project is unable to run with this error. Is there a way to resolve this?Hey,
I am also getting this error message and reads: "Errors (1 item) Child tag initializer for type 'Array' may not be empty. There is no way to edit anything in Code view, and I've been working this project for a little while. Imported items from Photoshop CS4. What to do? Thanks. -
Problem with java applet and array of arrays
hi!
i'm passing an array of arrays from java applet using
JSObject.getWindow(applet).call("jsFunction", array(array(), array()) );
in every other browser than safari 4.0.2 it's no problem to iterate over this array. in safari "array.length" is undefined. is such construction supported in safari's js engine?
Message was edited by: quaintpl
Message was edited by: quaintpl
Message was edited by: quaintpl
Message was edited by: quaintpl
Message was edited by: quaintplThanks for the answer but the problem is the type of object of method and how from pl/sql is posiblle to call.
The method waiting a ArrayofAlicIva, but if i define this object is not posible to set the object inside the array because the wsdl not have this functions.
I need to define array of objects but the object is inside is the diferent type of array.
If i Define the array of object correct to object inside, the method expect that the other array type.
Is a Deadlock ??
The solution in Java is Simple
AlicIva[] alicIva = new AlicIva[1];
alicIva[0]= new AlicIva();
alicIva[0].setId(Short.parseShort(1));
fedr[0].setIva(alicIva);
this is the method imported in java class to form
-- Method: setIva (LArrayOfAlicIva;)V
PROCEDURE setIva(
obj ORA_JAVA.JOBJECT,
a0 ORA_JAVA.JOBJECT) IS
BEGIN
args := JNI.CREATE_ARG_LIST(1);
JNI.ADD_OBJECT_ARG(args, a0, 'ArrayOfAlicIva');
JNI.CALL_VOID_METHOD(FALSE, obj, 'FECAEDetRequest', 'setIva', '(LArrayOfAlicIva;)V', args);
END; -
Is it possible to/how can I create an array of arrays in Labview 6i?
I am trying to create a data structure based on a tree where each limb is an array of arrays and each of those arrays is an array of arrays...etc. My ultimate purpose of this is for multidimensional (infinite) data saving/data recovery.
I suspect it won't work for your intended application, but here is an answer to your question:
You can't create an array of arrays, because that would be the same as increasing the number of dimensions of the array. However, you can store an array in a cluster, then have an array of clusters with arrays in them. So, indirectly it is possible. This gives you the possibility of each array being a different size.
Bruce
Bruce Ammons
Ammons Engineering -
A structure with mutiple data types or array of array
I want to read some soft of a table from a text file and want to store in a structure (not in database) for future use. I want the structure to have rows and columns when I need to reach. Colums should store multiple data types (int and/or string). I have examined Collections that only store one data type and only one dimension. I need a structure that holds multiple datatypes and at least 2 dimension. In short I need array of array? Any example or suggestion?
Here is the colection part. But I cound not get it finished. Stuck at getting data from collection.. How could I read from the collection
public static Long ReadFromFile() {
List liste = new ArrayList();
try {
FileReader file = new FileReader ("abc.txt");
BufferedReader buffer = new BufferedReader (file);
String line = "";
int i = 0;
while ((line = buffer.readLine())!= null) {
if (i>0) {
DataS kontrol = new DataS();
String [] temp = null;
temp = line.split("\t");
for (int j=0; j< temp.length; j++) {
if (j== 0 && StrUtil.ValidNumber(temp[0])>0 ) {
kontrol.set_C_id(temp[0]);
} else if (j== 1) {
kontrol.set_C_enabled(temp[1]);
} else if (j== 2) {
kontrol.set_C_table(temp[2]);
} else if (j== 3) {
kontrol.set_C_field(temp[3]);
} else if (j== 4) {
kontrol.set_C_xmlobjectname(temp[4]);
} else if (j== 5) {
kontrol.set_C_xmlsubobjectname(temp[5]);
} else if (j== 6 && StrUtil.ValidNumber(temp[6])>0 ) {
kontrol.set_C_controltype(temp[6]);
} else if (j== 7) {
kontrol.set_C_datatype(temp[7]);
} else if (j== 8 && StrUtil.ValidNumber(temp[8])>0 ) {
kontrol.set_C_datalength(temp[8]);
} else if (j== 9 && StrUtil.ValidNumber(temp[9])>0 ) {
kontrol.set_C_dl(temp[9]);
} else if (j== 10) {
kontrol.set_C_conditionop(temp[10]);
} else if (j== 11) {
kontrol.set_C_conditionval(temp[11]);
liste.add(kontrol);
i++;
buffer.close();
catch (IOException e) {
return Long.valueOf(-1);
/*For reading test*/
try{
DataS stored_kontrol = new DataS();
Iterator itr = liste.iterator();
int i = 0 ;
while(itr.hasNext()) {
//Object obj = itr.getClass();
// Here were I stuck... How can I read from collection which is filled with object
} catch (Exception e) {
return Long.valueOf(-1);
return Long.valueOf(1);
} -
Java.sql.SQLException: Internal Error: at oracle.sql.ARRAY.getArray(ARRAY.j
hi all,
I am getting the below exception
Basically i am registering an out parameters like this
cs.registerOutParameter(4, Types.ARRAY, "ISSUESECTION_LIST");
my database version: oracle 11.1.0.7.0.
I have created a synonym and given the execute privileges ,but also it comes up with the below exception
java.sql.SQLException: Internal Error
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.initCollElemTypeName(OracleTypeCOLLECTION.java:1026)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.getAttributeType(OracleTypeCOLLECTION.java:1056)
at oracle.jdbc.oracore.OracleNamedType.getFullName(OracleNamedType.java:110)
at oracle.jdbc.oracore.OracleTypeADT.createStructDescriptor(OracleTypeADT.java:2262)
at oracle.jdbc.oracore.OracleTypeADT.unpickle81(OracleTypeADT.java:1656)
at oracle.jdbc.oracore.OracleTypeUPT.unpickle81UPT(OracleTypeUPT.java:466)
at oracle.jdbc.oracore.OracleTypeUPT.unpickle81rec(OracleTypeUPT.java:416)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81_imgBody_elems(OracleTypeCOLLECTION.java:979)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81_imgBody(OracleTypeCOLLECTION.java:923)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81(OracleTypeCOLLECTION.java:743)
at oracle.jdbc.oracore.OracleTypeCOLLECTION._unlinearize(OracleTypeCOLLECTION.java:242)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unlinearize(OracleTypeCOLLECTION.java:208)
at oracle.sql.ArrayDescriptor.toJavaArray(ArrayDescriptor.java:963)
at oracle.sql.ARRAY.getArray(ARRAY.java:370)
at com.db.gmr.eds.sm.jdbc.IssueSectionStoreJDBC.getResources(IssueSectionStoreJDBC.java:69)
at com.db.gmr.eds.handler.GetResources.handle(GetResources.java:126)
at com.db.gmr.eds.servlet.PageController.handle(PageController.java:138)
at com.db.gmr.eds.servlet.PageController.doGet(PageController.java:80)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at com.db.gmr.core.servlet.filters.TomcatParameterBugFix.doFilter(TomcatParameterBugFix.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.valves.FastCommonAccessLogValve.invoke(FastCommonAccessLogValve.java:500)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:291)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:775)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:704)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:897)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Thread.java:619)
If i use cs.registerOutParameter(4, Types.ARRAY, "SCHEMA_OWNER_NAME.ISSUESECTION_LIST"); Then i wont be getting the error.
COULD ANYONE LET ME KNOW THE WORK AROUND OTHER THAN THE ABOVE SOLUTION LIKE ADDING THE OWNER SCHEMA NAME WITH THE USER DEFINED COLLECTION TYPE.There couold be two reasons:
1) it depends how u have defined type. if ISSUESECTION_LIST is defined in type SCHEMA_OWNER, then you have to call this ways only 'SCHEMA_OWNER_NAME.ISSUESECTION_LIST'
2) You might have defined using schema_owner_name like scott.<TYPE_NAME>. if its so, then drop it and again define type without using schema owner.
For detail help post your type declaration. -
Hello,
How can I create an array of array please?
Regards,
Peter
Peter.
Labview 2010
Solved!
Go to Solution.Array of array hack
Ragged array feature request
- Cheers, Ed -
Filter an array of arrays based on some criteria
Hi Folks:
Is there a way to filter an array of arrays based on some criteria?
Say I have the below set of records in an array of arrays. testArr[][]
ID DTLNUM PARTNUM PARTDESC
AB11 AB11-1 6531079 bath towel
AB11 AB11-2 5122830 bathtub mat
AB11 AB11-3 3649100 shower curtain
AB11 AB11-4 1143784 hamper
AB11 AB11-5 2672324 bath scaleI want to filter the above array and get all records having PARTDESC beginning with the letters "bath" into another array of arrays, resultArr[][] //I want to get the result in this one.
How could this be done?
Please help.
Thank you for your time.Say I have the below set of records in an array of arrays. testArr[][]
Why array of arrays? Why not an array of objects of a class say 'Part'?
class Part{
String id;
String dtlnum;
String partnum;
String partdesc;
// getters and setters
}As far as filtering is concerned, regex match would be very easy...
Part[] parts;
Part[] filtered;
//initiallize parts
void filter(String keyword){
ArrayList<Part> list=new ArrayList<Part>();
for(Part p:parts){
if(p.getPartdesc().matches(keyword+".*"))list.add(p);
filtered=list.toArray();
// call filter function to filter
filter("bath");Thanks!
PS: This code is neither tested nor compiled. -
import java.util.Arrays;
import java.util.Date;
import java.util.List;
public class StockDay
private String[] stockDayData;
List stockDays = new ArrayList();
public StockDay(String stockData)
stockDayData = new String[6];
String[] stockDayData= stockData.split(",");
stockDays.add(stockDayData[]);
}I have an outside class calling this class with a string of data separated by commas. I am trying to separate the data so that each time the method is called, each piece of the data (6 total) is put into an array list. Then that array list is put into an array list of arrays. I am sorry if I have not made this clear, I will try again. I want an array of arrays, and the interior arrays will contain 6 pieces of information each from the string that is given to the method, and each separated by commas.
Any help is much appreciated. I am also curious how I can accesses one piece of the data at a time, this is what I am thinking for this:
data = arraylist1[#].arraylist2[#]this would set data equal to whatever is in arraylist2[#]
Thank you very much.ActingRude wrote:
I meant just a simple Array I guess.Note the difference between Array and array. Class names start with uppercase in java. There is a class called Array, but it's just a utility class, and isn't part of arrays.
.. like I am using above? I was under the impression that the biggest syntax difference between an array(fixed number of items) and an ArrayList(unfixed number of items) was the use of the [] and () That's one of many syntactical differences, yes, but the main difference is not in the syntax. arrays are part of the Java language, have special handling because of that, and are faster and smaller than ArrayLists. ArrayList is part of the API, and didn't exist until Java 1.2 (about 5-6 years into Java's life, I think), and is built on top of an array.
UnsupportedOperationException:
null (in java.util.AbstractList)I have no idea what is causing this, I can only assume that I am doing something wrong...It looks like you're tyring to add null to an ArrayList and it doesn't like it. I thought ArrayList accepted null elements, but I could be wrong. Paste in the exact line that's causing it, and any declarations necessary to clarify any variables used on that line. -
lets say I have
var myAr:Array = new Array(value, value2, value3);
var holdAr:Array = new Array();
holdAr.push(myAr);
when I trace out holdAr: value, value2, value3
however, if I trace out holdAr[0], I get the same as tracing
holdAr.... how can I push an array into a new array and keep the
indexes?You are only adding one element to the array holdAr. That
element is an array with three indices. I think you need to add the
elements one at a time to get what you're looking for. -
Initialize array from a constant string
I generated the coefficients for a FIR filter in Mathscript (250 taps). I dumped the values to a data file and then "load"ed them into a Mathscript box inside my vi.
This worked well until I created an executable version of my program (no Mathscript) where my coefficient vectors now come up Null.
My idea is to text copy the coefficients into a string constant in my vi, and then initialize my array as part of my start-up routines.
I was wondering if anyone has done this? Is such a routine available anywhere?
Thanks,
Tom JHow are you building the path the file that you are reading?
When you build an executable, the path of the VIs it contains changes.
In development environment, path to VI = c:\project\Top Level.vi
In executable environment, path to VI = c:\project\Executable.exe\Top Level.vi
So if the file you are reading is in the same directory as the executable, and you are building a path relative to that, you need to strip one more path level for the executable.
The above image shows one way to do determine programmatically if you are in the development or executable environment and how to strip the path an extra time for the RTE.
If this is not the problem, kindly ignore everything I just rambled on about.
Ed
Message Edited by Ed Dickens on 02-22-2007 10:36 AM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Strip Path RTE.gif 4 KB -
Multiply 3D array elements by constant
I consider myself a beginner at LabVIEW. With that said, I have a 3D array (x,y,z) where x and y both range from 0-400 and z ranges from 0-13. I want to multiply all of the x's and y's under each z, by a different constant. For example, x=0-400, y=0-400 and z=0, I want to multiply both x and y by 0.4. Then for x=0-400, y=0-400 and z=1 I want to multiply x and y by 0.43 (random cosntant), and so on.
How can I do this?
Thanks in advance!I actually asked the wrong question. If this thread needs to be deleted and I need to start another one, just let me know.
This is what I'm trying to do. I have a 3D array (x,y,z) where x and y are pixel locations of an image (rows and columns ranging from 0-400) and z is wavelength (ranging from 0-13). For each combination of x,y and z there is a value. I want to hold z constant at 0 (z=0) and multiply every value at every pixel location by a constant.
For example x=0-400, y=0-400 and z=0. I want to multiply the value at every combination of x and y by a constant while holding z at 0. Then move onto z=1 and multiply every combination of x and y by a different constant.
I attached an image of an indicator from the 3D array below. The three white boxes are the x y and z and the fourth grey box is the value I want to change for each combination of x and y for z=0-13. -
Is it possible to multiply the content of an array by a constant numeric.
Hi,
I am using Universal library to read a voltage from a DAQ device, and it seems the reading function is putting it into an 1-D array then into a graph.
I need to get this voltage and multiply by a number and could not do that as it is in array format.
How would I be able to multiply the array content by a constant numeric?
Thanks
Solved!
Go to Solution.Hi,
Thanks for the reply, did not work, I have attached an image illustrating it.
Maybe you are looking for
-
Hello all; I recently purchased a bunch of components on NCIX, and assembled the computer together, and everything is working extremely well - minus the LAN connections. I've never seen the LEDs light up, and all I'm ever getting in the windows prope
-
I have a DAQ Assistant configured to read 2 channels at the same time. When I wire a graph indicator to the output, I see the 2 signals jumbled together. How do I split them up into seperate signals? When I wire any type of indicator it is showing ju
-
How do I get the Flash site to work on the server
Hi, I'm a beginner working with Studio 8. I have the Flash site working as desired from my desktop, but I have issues once loaded to the server. Hopefully someone here can point me in the right direction. Firstly, I would like the site to work within
-
Mac Mini to Mitsubishi WS-55809
My Mitsubishi WS-55809 is 1080i projection HDTV. It only has DTV (which the cable box uses) and 2 Component inputs. There are multiple S-Video and composite inputs. I have fallen in love (of course) with the component video out of a Apple TV and my T
-
Wanted To Channge The Standsrd Purchase Order Template with Customized Temp
Hi ALL, I m using oracle 11.5.10.2. I want to change the template attached with the Standard Purchase Order(PO_STANDARD_XSLFO) which is in XSL-FO Formatt.I want to use my customized template for printing Purchase order.I attached one template with th