Initializing log4j in app tier
My application runs on clustered environment.
I have multiple app servers and web servers each running on different jdks.
Initializing log4j in web tier I can perform with servlet at server startup but in no app tier I donot want war module so I will have only jar files ejb's, in this case when and where is the best palce to initialize log4j.
Thanks & Regards
Miro
As I said my application is distributed in two tiers web tier and app tier,
I configured jms in app tier. Now my servlet in web tier has to send message to queue in app tier.
In case of accessing an ejb I create Properties Object
Properties objProperties = new Properties();
objProperties.put(Context.INITIAL_CONTEXT_FACTORY,"com.evermind.server.rmi.RMIInitialContextFactory");
objProperties.put(Context.PROVIDER_URL,"ormi://localhost:9127");
objProperties.put(Context.SECURITY_PRINCIPAL, "admin");
objProperties.put(Context.SECURITY_CREDENTIALS, "admin");
InitialContext ic = new InitialContext(objProperties);
where I specify all the parameters mentioned above and use the lookup method to create a home interface and then create remote interface.
In case of sending a message to jms queue what properties should I pass to InitialContext object?
Similar Messages
-
Hi All,
11i Configuration Details: 2 Machines
(1)Machine A Windows 2003(32 bit): Database tier: 10gR2(10.2.0.3) NO RAC
(1)Machine A Windows 2003(32 bit): Apps tier: (Concurrent,Reports)
(2)Machine B Windows 2003(32 bit): Apps tier: (Admin,Web,Forms)
Ours is 15 Concurrent Users and no customizations to any processes.
Now planning to move to windows 2008 R2(64 bit) machine as part of upgradation to 12.1.3
Planning R12.1.1 configuration Details: 2 Machines
(1)Machine A Windows 2008 R2 Server(64 bit): Database tier: 11gR2(11.2.0.2) No RAC
(2)Machine B Windows 2003(32 bit): Apps tier: (Concurrent,Reports,Admin,Web,Forms)
OR it should be
(2)Machine B Windows 2008(32 bit): Apps tier: (Concurrent,Reports,Admin,Web,Forms)
Is this confugaration advisable? Any Performance wise degradation.
Planning to have BI Publisher and Discoverer .. Where to install these?
Process:
1) Staged Environment:
Machine A Windows 2008 R2(64 bit): Upgrade 10gR2 to base 11gR2 and then to 11.2.0.2 on any windows 32 bit machine. And migrating this DB to 64 bit Machine A.
Machine B Windows 2003/2008(32 bit): Freshly installing 12.1.1 apps tier (Concurrent,Reports,Admin,Web,Forms), Porting over any personalised Reports,Forms(few personilizations) and Interfaces. And then upgrading to RUP3(12.1.3). Opting for Fresh installation as there are no process customizations mainly.
Now my doubt is.. for 15 Concurrent user.. just having one Apps Tier is sufficient with 4 GB RAM(cannot be extended as it is windows standard 32 bit and max is 4 GB RAM), DB Tier with 8 GB RAM on windows 2008 R2(64 bit)?
Please suggest me any other approaches if any applicable for Windows. I am a Newbie in implementation.
Rgds
SSHi;
11i Configuration Details: 2 Machines
(1)Machine A Windows 2003(32 bit): Database tier: 10gR2(10.2.0.3) NO RAC
(1)Machine A Windows 2003(32 bit): Apps tier: (Concurrent,Reports)
(2)Machine B Windows 2003(32 bit): Apps tier: (Admin,Web,Forms)
Ours is 15 Concurrent Users and no customizations to any processes. I belive there is no need this kind of arch. for just 15 users
Now planning to move to windows 2008 R2(64 bit) machine as part of upgradation to 12.1.3Please see:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]<< From note:
Windows Server 2008 R2 is certified with Oracle E-Business Suite Release 12 (12.1.1 or higher) using a migration process as outlined in My Oracle Support Document 1188535.1. Installing Oracle E-Business Suite using the Rapid Install directly on Windows Server 2008 R2 is not currently supported.
Planning R12.1.1 configuration Details: 2 Machines
(1)Machine A Windows 2008 R2 Server(64 bit): Database tier: 11gR2(11.2.0.2) No RAC
(2)Machine B Windows 2003(32 bit): Apps tier: (Concurrent,Reports,Admin,Web,Forms)
OR it should be
(2)Machine B Windows 2008(32 bit): Apps tier: (Concurrent,Reports,Admin,Web,Forms)I perefer to go wiht option 2 because its a newer version.
Is this confugaration advisable? Any Performance wise degradation.I belive yes
Planning to have BI Publisher and Discoverer .. Where to install these?I suggest use new server for those
Process:
1) Staged Environment:
Machine A Windows 2008 R2(64 bit): Upgrade 10gR2 to base 11gR2 and then to 11.2.0.2 on any windows 32 bit machine. And migrating this DB to 64 bit Machine A. Correct
Machine B Windows 2003/2008(32 bit): Freshly installing 12.1.1 apps tier (Concurrent,Reports,Admin,Web,Forms), Porting over any personalised Reports,Forms(few personilizations) and Interfaces. And then upgrading to RUP3(12.1.3). Opting for Fresh installation as there are no process customizations mainly.
Now my doubt is.. for 15 Concurrent user.. just having one Apps Tier is sufficient with 4 GB RAM(cannot be extended as it is windows standard 32 bit and max is 4 GB RAM), DB Tier with 8 GB RAM on windows 2008 R2(64 bit)?I belive its okey,it wont be cause some problem for 15 users
Regard
Helios -
MacBook Pro (mid 2010) - Slow Startup and Initial Load of Apps after Mavericks Install
Hello everyone,
Long time Snow Leopard user here. I've been absolutely, 100% thrilled with my MBP's performance / speed since mid 2010. Since installing Mavericks I've noticed two things:
1. Initial on boot load times seem much slower
2. The first time you open an app (Safari, even TextEdit) is far slower than in Snow Leopard.
Now granted, once the computer has been on for about 5 minutes, and once you've had an application open for 1-2 minutes, than performance is okay once again. But it seems that quite literally everytime you do "anything" for the first time since the computer has been turned on you run the risk of a spinning beachball and an extended wait. This simply never happened in Snow Leopard.
I'm not a computer science major but I do understand that when you do something for the first time since a reboot it will need to load new files into the RAM which takes time. However, I've been using this computer since 2010 and have never experienced this behavior / speed / delay, etc... something seems fundamentally different.
For example, even just opening finder, and navigating to the Applications folder results in sluggish behavior the first time. Also, anytime you first click the top menu bar in an application you run the risk of a beachball.
It doesn't seem like a failing hard drive because I can read/write large chunks of data one an app is finally loaded. It's just initially loading the app takes quite literally 10-20 times longer than Snow Leopard. It seems like perhaps Mavericks itself, the core of the new OS was perhaps installed in a bad sector of the HD, but none of my other files are on bad sectors... if that makes sense. Again - I'm not a computer science major so I'm largely just making things up
It also seems as if multitasking and switching between several open apps has seen a decrease in performance. Could it be that perhaps Mavericks RAM management is superior to Snow Leopard, but only if there is a TON of RAM to go around? Could it be as simple as Macs with only 4GB installed should not be allowed to even install Mavericks?
Does this sound normal for Mavericks considering I have a C2D processor, a non SSD, and only 4GB ram? I know those specs are "outdated" for 2014, but keep in mind these were the specs that I've always had and with Snow Leoapard I was consistently thrilled with the speed of the computer.
I suppose my question is: should my strategy be to simply turn the computer on, get a cup of coffee and let everything load and maybe even have my frequently used apps load on startup, etc... and carry on as normal? Does something seem off? Should I invest in a new SSD / RAM upgrade? I know the upgrades couldn't hurt, but the issue is that I was perfectly content until upgrading to Mavericks
I've tried booting into OS X Recovery mode and using the Disk Utility. I've tried Safe Mode. I've included a "EtreCheck" report below. I'm open to any ideas / suggestions.
Thanks!!
Hardware Information:
MacBook Pro (13-inch, Mid 2010)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:48
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 249.2 GB (228.46 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Logitech USB Receiver
Apple Inc. Apple Keyboard
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
None
Internet Plug-ins:
FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
4% WindowServer
1% EtreCheck
0% mds
0% mds_stores
0% airportd
Top Processes by Memory:
111 MB com.apple.IconServicesAgent
94 MB Finder
57 MB Dock
53 MB SystemUIServer
53 MB EtreCheck
Virtual Memory Information:
1.64 GB Free RAM
1.42 GB Active RAM
314 MB Inactive RAM
390 MB Wired RAM
316 MB Page-ins
0 B Page-outsWish I could be of some help, but I'm having similar issues on my mid 2011 macbook pro with 8 GB ram. It's very frustrating. I haven't worked on a computer this slow since the early 90's. Even simple things like signing in to this site bring up the beach ball for maybe ten seconds. When opening up apps I often have to wait minutes, and often end up force quitting when they hang. I'm using force quit a dozen or more times a day, when it used to be very rare.
I don't know if it's Mavericks. I installed a new hard drive in November, but the problems really started getting bad since the latest upgrade.
It's not just opening apps. If I have an app open in the background and switch to it I have similar issues. Watching a simple video is often accompanied by stalls and delays - which is really bad as I'm often using the laptop to edit video. It's become unuseable for work.
Perhaps the most frustrating is clicking on a link, only to find Safari decides to complete a previous scroll that it had paused. The page jumps down, and sometimes I end up clicking on a link I didn't want. Then I have to wait for THAT spinning beach ball before I can go back to the previous spinning beach ball.
It can take up to ten minutes to restart. I've tried everything I could find on these pages so far, and nothing has worked.
I thought maybe it was something I've done (and perhaps it is), but I keep seeing others with similar issues. -
Error while running adcfgclone on apps tier
I am getting the following error while running adcfgclone on the apps tier...
OS: RHEL 5.5 64bit
Oracle 10.2.0.3
EBS R12.0.4 Multinode
DB Tier and APPS Tier on different nodes.
RC-50004: Fatal: Error occurred in ApplyAppsTier:
StackTrace -
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFile.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V
at oracle.apps.ad.clone.ApplyApplTop.checkAutoConfigErr(ApplyApplTop.java:590)
at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:558)
at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
... 6 moreon the checking the logfile I am getting the following error
Executable : /do5_apphome/apps/tech_st/10.1.2/bin/sqlplus
SQL*Plus: Release 10.1.0.5.0 - Production on Fri Mar 30 11:12:06 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Enter value for 4: ERRO R:
ORA-12560: TNS:protocol adapter error
igccmprf.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Product Top Drivers executed : AD_TOP FND_TOP ICX_TOP IEO_TOP BIS_TOP AMS_T OP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL_TOP OKS_TOP CSF_TOP IGS_TOP IBY_ TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP FTE_TOP ONT_ TOP AR_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOPI have successfully run rapidclone on db tier without any errors..Kindly advice me what to do to get my apps up and running..Database is already up and running!Mr Hussein ,
I guess it is an issue with autoconfig. So i tried to run auto config manually and got the following error which I would like you to have a look at
ADX Database Utility
getConnection() -->
sDbHost : devdb
sDbDomain : erp.local
sDbPort : 1551
sDbSid : dev
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@devdb.erp.local:1551:dev
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devdb.erp.local)(PORT=1551))(CONNECT_DATA=(SERVICE_NAME=dev)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devdb.erp.local)(PORT=1551))(CONNECT_DATA=(SERVICE_NAME=dev.erp.local)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Verifying connection to the Database : Could not be stablished
No Restore Profile file created.
Restore Profile utility ran successfully
===========================================================================
Listener Port no 1521 -
Error while runnning autoconfig on apps tier during upgrade
Hi,
Error while runnning autoconfig on apps tier during upgrade from 11.5.9 to 11.5.10.2
below is the error message.
Enter the APPS user password :
The log file for this session is located at: /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /u01/app/tinst/tinstappl
Classpath : /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/jre/lib/rt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/dt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/tools.jar:/u01/app/tinst/tinstcomn/java/appsborg2.zip:/u01/app/tinst/tinstcomn/java
Using Context file : /u01/app/tinst/tinstappl/admin/TINST_dba5.xml
Context Value Management will now update the Context file
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:759)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:147)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:128)
at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1762)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
... 8 more
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
/u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
Please let me know your suggestions to resolve this issue.
Regards,
Sreenivasulu.Hi,
DB tier autoconfig was successfully completed.
We have already checked the above mentioned metalink ID's, but still the issue is same.
Can you please advice any other solutions.
Regards,
Sreenivasulu. -
Error while running autoconfig on apps tier
Dears ,
apps 11.5.10.2
DB 9.2.0.8
OS solaris sparc 10 64bit
while running autoconfig on apps tier autoconfig failed with CLNADMPRF.SH and okladmprf.sh and autoconfig take along time to complete
ERROR:
ORA-12154: TNS:could not resolve service name
1- how can i solve these error ?
2- should i skip these errors and start upgrade apps from 11.5.10.2 to 12.1.1 and DB from 9.2.0.8 to 11.2.0.1 ?
Regards ,,,while running autoconfig on apps tier autoconfig failed with CLNADMPRF.SH and okladmprf.sh and autoconfig take along time to complete
ERROR:
ORA-12154: TNS:could not resolve service name
1- how can i solve these error ?Please see (CLNADMPRF.SH FAIL WITH ORA-12154 WHILE RUNNING AUTOCONFIG [ID 753535.1]).
2- should i skip these errors and start upgrade apps from 11.5.10.2 to 12.1.1 and DB from 9.2.0.8 to 11.2.0.1 ?No, please find the error first then proceed with the upgrade.
Thanks,
Hussein -
I am getting below error while running adcfgclone on APPS tier
ERROR : Unable to set CLASSPATH
/corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_29475.err file for errors
i copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_30763.err file for errorsPlease post the details of the application release, database version and OS.
ERROR: context creation not completed successfully
This is a generic error, please check the log files for details about the error.
Thanks,
Hussein -
Error RC-10203 while running adcfgclone.pl on apps tier
Hi,
Hoping someone can help - I am new to Oracle Apps and cloning.
background:
-I have been tasked with completing the cloning steps for a development environment. I was provided source apps tier binaries (EBS 11i, 11.5.10.2) and source database binaries (10gR2, 10.2.0.5) created from a production multi-tier instance.
-The target is a two tier system (apps tier is one instance, db is other instance)
-Both instances of the target are running Red Hat 5.9 (db is 64 bit, apps tier is 32-bit)
-I have successfully restored the database
-I have successfully configured the env and tnsnames.ora on the target apps tier and connect to the database using the APPS credentials
-I do not have access to the production system nor can I ask anyone from the production side for assistance.
problem:
Getting an error when running:
$COMMOM_TOP/clone/bin/adcfgclone.pl appsTier
Throwing exception:
RC-50004: Error occurred in CloneContext:
RC-10203: The template provided does not match with the context file.
Context file creation not successful.
Any suggestions?
I've performed cloning once before, but not with these binaries. Needless to say I did not get this error last time.
Thanks in advance..
RKUHi Hussein-
I pulled this from /tmp/CloneContext_0730050807.log
StackTrace:
java.lang.Exception: RC-10203: The template provided does not match with the context file.
at oracle.apps.ad.context.CloneContext.setTemplateLocation(CloneContext.java:3144)
at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:666)
at oracle.apps.ad.context.CloneContext.main(CloneContext.java:6270)
RC-50004: Error occurred in CloneContext:
RC-10203: The template provided does not match with the context file.
Context file creation not succesful -
Create XML file failed in apps tier
appliations instance details
version:11.5.8 and database version 9.2.0.7
platform HP-tru64 5.1b
type=single node
I have applied the patch AD.I.6 and Autoconfig latest patch ie 5985992
during migrating non-autoconfig to autoconfig dbtier went smoothly but appstier getting some errors
alpha2.bw.ltindia.com> perl adbldxml.pl tier=apps appsuser=apps appspasswd=apps
Starting context file generation for apps tier..
Using JVM from /usr/bin/java -mx256m to execute java programs..
The log file for this adbldxml session is located
at:
/d36/appluat/erpuatappl/admin/log/adbldxml_02132005.log
For errors, Check log file :/d36/appluat/erpuatappl/admin/log/adbldxml_02132005.
log
In the log file
FOLLOWING ERROR OCCURED :
null
StackTrace:
java.lang.NullPointerException
at java.io.File.<init>(Compiled Code)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForApps(Compile
d Code)
at oracle.apps.ad.context.GenerateContext.main(Compiled Code)
Thanks in advanceThe problem is resolved use the metalink id below
adbldxml.pl fails with java.lang.Exception DocID: Note:340945.1
Java.Lang.Nullpointerexception Doc ID: Note:404762.1 -
I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new APp. It can be opened, but I want the APP to be on her iPhone screen as well as on mine. Help, please.
Is the app downloaded on her phone also?
-
Changing Configuration off EBS App Tier Hosts
Hello
I have a couple of questions regarding re-configuring a TEST APPS system setup after a clone/backup/restore.
1) We have three nodes on our PRODUCTION file system. Node A - serves as the DB tier; Node B - is Application Server (Conc Processing, Admin and Web Server) and Node C - is Application Server (only used for PCP).
2) I have noticed that during times of heavy concurrent processing, Node C is never utilized and is almost always at 0-5% utilization. Node B, however at such times is always at 95-100% utilization.
3) So I want to make a change in the following manner on the cloned system (and then follow through with the same change on the PRODUCTION system)
4) I want to assign Node C as the web server only (point of entry into the Application)
5) I then want to assign Node B to Concurrent Processing/Admin/Apps Tier Server
6) Node A will remain as the DB Tier server.
After succesfully configuring this (if possible), I will then double up the web and CP/Admin/Apps Tier server using a F5 load balancer.
Is it possible (using the CONTEXT_FILE) to re-configure the nodes as stated about in 4 and 5?
Thanks in advance.So, you are saying you have the following:
Node A - is Database Server
Node B - is Application Server (CM, Admin and Web Server) -- Btw, the admin server does not exist in R12 so I assume it is CM/Web/Forms
Node C - is Application Server (only used for PCP)
And, you are planning to change the above to:
Node A - is Database Server
Node B - is Application Server (CM, Forms)
Node C - is Application Server (Web only)
In this case, editing the context file only is not sufficient and you will have to do the following:
- Change the context variables as per your new configuration as per (doc 415385.1, 406558.1, 464018.1)
- Complete the steps in (Concurrent Processing - How to move Concurrent Processing Server from one node to another node [ID 373611.1]) including cleaning the FND_NODES table and running AutoConfig
- Before you start the CM (as it will be on one node only) you will have to navigate to (System Administrator responsibility > Concurrent > Manager > Define) and delete all CMs that used to run on Node C and make sure all the CMs run on Node B only (check the primary node for each CM) -- You are moving from PCP to CM on single node
- Start the CM
Thanks,
Hussein -
Moving Apps-Tier from One Server to Another Server
Hello -
Please find details below
We are on R12.1.3 and details
Datbase Version : 11.2.0.3
E-Business Version : 12.1.3
Operating System : Solaris 10 on both servers A & B
Source Server Details : Server A
Source Instance : Single Tier
User : Oracle
Tier : DB
User : Applmgr
Tier : Apps
Application Tier : Concurrent / Forms / Web / Others
Our Goal is to moving Apps-Tier from Server A to Server B
Steps we followed as part of this :
1. Shutdown apps-Tier services on Server A
2. Ran adpreclone.pl on apps-Tier on Server A
3, Copy apps-Tier files from Server A to Server B
4. Ran adcfgclone.pl appsTier on Server B
5, perl adaddnode.pl on Server B
By Following above steps we are not able to bring up concurrent managers.
Please suggest us if we are doing anything wrong.
Regards
VSHBy Following above steps we are not able to bring up concurrent managers.What is the error you get when you start the CM? Any errors in the CM log file?
Please run cmclean.sql and ccm.sql as per these docs.
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1
Concurrent Processing - CCM.sql Diagnostic Script to Diagnose Common Concurrent Manager Issues [ID 171855.1]
Please also make sure you have proper entries in FND_NODES table -- How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Thanks,
Hussein -
Upgrade 11.5.10.2 to R12 on apps tier only
Hussein,
My Oracle EBS running on Split Tier architecture, 11.5.10.2 apps tier on sun server and 11.2.0.3 on Linux server. I am planning to upgrade R12. OATM is completed on the database server.
Which is the best way to upgrade. As of now my option is install R12 application Tier on sun server and do my customization.
OR upgrade option is the best
Please let me know which is the best option.
Thanks
Prince
Edited by: user12094010 on Apr 30, 2012 1:34 PMHussein,
My Oracle EBS running on Split Tier architecture, 11.5.10.2 apps tier on sun server and 11.2.0.3 on Linux server. I am planning to upgrade R12. OATM is completed on the database server.
Which it best way to upgrade. As of now my option is install R12 application Tier on sun server and do my customization.
OR upgrade option is the best
Please let me know which is the best option.Prince,
Please elaborate more on the upgrade options you are referring to.
I understand one option is to upgrade (lay down R12 software) on the existing 11i apps tier (Sun servers), what about the other option?
Thanks,
Hussein -
OAS 10gR2 and e-Biz app tier on same server
I seem to have some sort of contention on my application server and I was wondering if anybody might have a suggestion on how to verify my setup or troubleshoot.
I have a Red Hat ES 4 32-bit server that is running an 11.5.10.2 e-Biz application tier. This install was done by our e-Biz dba who has since left the company.
I have since installed OAS 10gR2 for another application with the intent that we would share this server.
This has been done successfully on our Test server with no issues but the app tier is not being shutdown every night like it is in Production.
However I have had a couple of situations where after my e-Biz application was restarted over night it was found to not be working in the morning with this error:
'JSP error: Request URI:/OA_HTML/AppsLocalLogin.jsp'
I tired to stop/start the e-Biz app tier but no go. The fix was to stop my oracle OAS server and stop/start the 11i e-Biz applicaztion tier.
CLARIFICATION:
The port pool assigned on this server is 0 I guess (as it uses 8000) and that url always works (servername:8000), it is the E-Business Home Page that fails and generates that JSP error.
I don't think it is HW related but more of a configuration issue. I know I can check my ports assigned in OAS via $OH/install/portlist but I'm not sure how to check the 'port pool' assigned by e-Biz.
Just wondering what I should verify or double-check configuration wise. The e-Biz app stops/starts every night for backups and has worked in conjunction with the OAS for the past week until today. I likely do not need to shutdown the app tier every night for backups but that would just mask the underlying issue.
We use a different userid for the financials configuration versus the OAS config and each env uses it's own oraInventory and directory structure etc.
I was thinking of using netstat to see what ports are in use before and after restarts and look into the 'net.ipv4.ip_local_port_range = 1024 65000' value set in the /etc/sysctl.conf file.
Any other suggestions?
Edited by: user6445925 on Jan 5, 2010 12:03 PM
Added CLARIFICATION section.My understanding with Financials is when you setup the app tier you pick a port pool (0 corresponds to port pool starting with 8000 etc. and port pool 4 would be 8004 etc.).
So in my case when I launch http://servername:8001 I get the Oracle Rapid Install Portal. So maybe that is port pool 1in my case (I'll research that).
If I pick 'Apps Logon Links' and then E-Business Home Page it takes me to http://servername:8001/OA_HTML/AppsLocalLogin.jsp which normally works.
It only fails sometimes and that seems to be in relation to my OAS install as it was added recently and shutting it down temporarily fixed the problem.
They are both running successfully again now. -
RW-20004 no installs found for this host Error when installing Apps tier
Hello:
Trying to install 12.1.1 on a linux x64 OS. Following is my current OS Setup:
1) Have 2 Instances or RHEL 5 Update 4 x64 each named as follows: oalin12db.apps.local & oalin12mt.apps.local
2) Both have multi user setups as follows:
a) user: oracle (501), group dba (503)
b) user: applmgr (502), group dba (503)
3) Installation of DB node successful for a Vision Instance with SID=VISN
4) Getting error "RW-20004 no installs found for this host" on apps tier. Does not matter if I use host:SID:port or copy the actual config file over and point rapidwiz to it, I get the same error.
5) checked everything as per metalink notes 605677.1 and 444870.1.
6) SELinux on Permissive mode on both instances for now.
7) Installation stage directory is local to the DB instance and is setup as an nfs mount onto the apps tier.
Here's how my config_VISN.txt file looks.
<?xml version="1.0"?>
<oa_context version="$Revision: 120.5 $">
<oa_context_name oa_var="s_contextname">config.txt</oa_context_name>
<oa_context_serial oa_var="s_contextserial">0</oa_context_serial>
<oa_context_type oa_var="s_contexttype">Config File</oa_context_type>
<oa_context_file_loc oa_var="s_contextfile">/u01/oracle/VISN/db/tech_st/11.1.0/appsutil/conf_VISN.txt</oa_context_file_loc>
<ini_file>
[GENERAL]
CONFIGURED_ENVS=VISN
CONFIGURATION_FORMAT=12.0.0
ACTION_TYPE=INSTALLING
NUMBER_OF_HOSTS=2
HOSTNAMES={Server0_oalin12db,Server1_oalin12mt}
[Server0_oalin12db]
s_contextname=VISN_oalin12db
s_dbSid=VISN
s_dbport=1526
s_platform=LINUX_X86-64
s_base_lang=US
s_env_langs={American_English - US}
s_allprod={FND}
s_defterr=AMERICA
s_domainname=apps.local
s_isDB=YES
s_isAdmin=NO
s_isForms=NO
s_isConc=NO
s_isWeb=NO
s_port_pool=5
s_dbSidLower=visn
s_dbuser=oracle
s_apps_version=12.1.1
s_dbGlnam=VISN
s_dbseed=Vision Demo
s_dbtype=VISION
s_dbgroup=dba
s_dbcset=AL32UTF8
s_base=/u01/oracle/VISN
s_db_oh=/u01/oracle/VISN/db/tech_st/11.1.0
s_dbhome1=/u01/oracle/VISN/db/apps_st/data
s_dbhome2=/u01/oracle/VISN/db/apps_st/data
s_dbhome3=/u01/oracle/VISN/db/apps_st/data
s_dbhome4=/u01/oracle/VISN/db/apps_st/data
s_dbhost=oalin12db
s_bits=32
s_db_ons_localport=6300
s_db_ons_remoteport=6400
s_cmanport=1521
[Server1_oalin12mt]
s_contextname=VISN_oalin12mt
s_dbSid=VISN
s_dbport=1526
s_platform=LINUX_X86-64
s_base_lang=US
s_env_langs={American_English - US}
s_allprod={FND}
s_defterr=AMERICA
s_domainname=apps.local
s_dbdomain=apps.local
s_isDB=NO
s_isAdmin=YES
s_isForms=YES
s_isConc=YES
s_isWeb=YES
s_port_pool=5
s_formsfndtop=/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0
s_dbSidLower=visn
s_dbuser=oracle
s_apps_version=12.1.1
s_base=/u01/oracle/VISN
s_inst_base=/u01/oracle/VISN/inst
s_config_home=/u01/oracle/VISN/inst/apps/VISN_oalin12mt
s_at=/u01/oracle/VISN/apps/apps_st/appl
s_at2=/u01/oracle/VISN/apps/apps_st/appl
s_at3=/u01/oracle/VISN/apps/apps_st/appl
s_at4=/u01/oracle/VISN/apps/apps_st/appl
s_tools_oh=/u01/oracle/VISN/apps/tech_st/10.1.2
s_weboh_oh=/u01/oracle/VISN/apps/tech_st/10.1.3
s_com=/u01/oracle/VISN/apps/apps_st/comn
s_javatop=/u01/oracle/VISN/apps/apps_st/comn/java/classes
s_temp=/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp
s_appsuser=applmgr
s_appsgroup=dba
s_at_cset=AL32UTF8
s_iana_cset=UTF-8
s_display=oalin12mt:0.0
s_dbhost=oalin12db
s_admhost=oalin12mt
s_formshost=oalin12mt
s_cphost=oalin12mt
s_webhost=oalin12mt
s_installedFrom=FS
s_root_status=enabled
s_web_entry_status=enabled
s_web_applications_status=enabled
s_batch_status=enabled
s_other_service_group_status=disabled
s_rpcport=1626
s_webssl_port=4443
s_ons_localport=6100
s_ons_remoteport=6200
s_ons_requestport=6500
s_webport=8000
s_active_webport=8000
s_formsport=9000
s_metdataport=9100
s_metreqport=9200
s_jtfuf_port=9300
s_mwaPortNo=10200-10205
s_mwaTelnetPortNo=10200,10202,10204
s_mwaDispatcherPort=10800
s_java_object_cache_port=12345
s_oacore_jms_portrange=23000-23004
s_forms_jms_portrange=23500-23504
s_home_jms_portrange=24000-24004
s_oafm_jms_portrange=24500-24504
s_oacore_ajp_portrange=21500-21504
s_forms_ajp_portrange=22000-22004
s_home_ajp_portrange=22500-22504
s_oafm_ajp_portrange=25000-25004
s_oacore_rmi_portrange=20000-20004
s_forms_rmi_portrange=20500-20504
s_home_rmi_portrange=21000-21004
s_oafm_rmi_portrange=25500-25504
</ini_file>
<config_section name="GENERAL">
<config_pair oa_var="CONFIGURED_ENVS">VISN</config_pair>
<config_pair oa_var="CONFIGURATION_FORMAT">12.0.0</config_pair>
<config_pair oa_var="ACTION_TYPE">INSTALLING</config_pair>
<config_pair oa_var="NUMBER_OF_HOSTS">2</config_pair>
<config_pair oa_var="HOSTNAMES">{Server0_oalin12db,Server1_oalin12mt}</config_pair>
</config_section>
<config_section name="Server0_oalin12db">
<config_pair oa_var="s_contextname">VISN_oalin12db</config_pair>
<config_pair oa_var="s_dbSid">VISN</config_pair>
<config_pair oa_var="s_dbport">1526</config_pair>
<config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
<config_pair oa_var="s_allprod">{FND}</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">apps.local</config_pair>
<config_pair oa_var="s_isDB">YES</config_pair>
<config_pair oa_var="s_isAdmin">NO</config_pair>
<config_pair oa_var="s_isForms">NO</config_pair>
<config_pair oa_var="s_isConc">NO</config_pair>
<config_pair oa_var="s_isWeb">NO</config_pair>
<config_pair oa_var="s_port_pool">5</config_pair>
<config_pair oa_var="s_dbSidLower">visn</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_dbGlnam">VISN</config_pair>
<config_pair oa_var="s_dbseed">Vision Demo</config_pair>
<config_pair oa_var="s_dbtype">VISION</config_pair>
<config_pair oa_var="s_dbgroup">dba</config_pair>
<config_pair oa_var="s_dbcset">AL32UTF8</config_pair>
<config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
<config_pair oa_var="s_db_oh">/u01/oracle/VISN/db/tech_st/11.1.0</config_pair>
<config_pair oa_var="s_dbhome1">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome2">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome3">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome4">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhost">oalin12db</config_pair>
<config_pair oa_var="s_bits">32</config_pair>
<config_pair oa_var="s_db_ons_localport">6300</config_pair>
<config_pair oa_var="s_db_ons_remoteport">6400</config_pair>
<config_pair oa_var="s_cmanport">1521</config_pair>
</config_section>
<config_section name="Server1_oalin12mt">
<config_pair oa_var="s_contextname">VISN_oalin12mt</config_pair>
<config_pair oa_var="s_dbSid">VISN</config_pair>
<config_pair oa_var="s_dbport">1526</config_pair>
<config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
<config_pair oa_var="s_allprod">{FND}</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">apps.local</config_pair>
<config_pair oa_var="s_dbdomain">apps.local</config_pair>
<config_pair oa_var="s_isDB">NO</config_pair>
<config_pair oa_var="s_isAdmin">YES</config_pair>
<config_pair oa_var="s_isForms">YES</config_pair>
<config_pair oa_var="s_isConc">YES</config_pair>
<config_pair oa_var="s_isWeb">YES</config_pair>
<config_pair oa_var="s_port_pool">5</config_pair>
<config_pair oa_var="s_formsfndtop">/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0</config_pair>
<config_pair oa_var="s_dbSidLower">visn</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
<config_pair oa_var="s_inst_base">/u01/oracle/VISN/inst</config_pair>
<config_pair oa_var="s_config_home">/u01/oracle/VISN/inst/apps/VISN_oalin12mt</config_pair>
<config_pair oa_var="s_at">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at2">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at3">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at4">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_tools_oh">/u01/oracle/VISN/apps/tech_st/10.1.2</config_pair>
<config_pair oa_var="s_weboh_oh">/u01/oracle/VISN/apps/tech_st/10.1.3</config_pair>
<config_pair oa_var="s_com">/u01/oracle/VISN/apps/apps_st/comn</config_pair>
<config_pair oa_var="s_javatop">/u01/oracle/VISN/apps/apps_st/comn/java/classes</config_pair>
<config_pair oa_var="s_temp">/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp</config_pair>
<config_pair oa_var="s_appsuser">applmgr</config_pair>
<config_pair oa_var="s_appsgroup">dba</config_pair>
<config_pair oa_var="s_at_cset">AL32UTF8</config_pair>
<config_pair oa_var="s_iana_cset">UTF-8</config_pair>
<config_pair oa_var="s_display">oalin12mt:0.0</config_pair>
<config_pair oa_var="s_dbhost">oalin12db</config_pair>
<config_pair oa_var="s_admhost">oalin12mt</config_pair>
<config_pair oa_var="s_formshost">oalin12mt</config_pair>
<config_pair oa_var="s_cphost">oalin12mt</config_pair>
<config_pair oa_var="s_webhost">oalin12mt</config_pair>
<config_pair oa_var="s_installedFrom">FS</config_pair>
<config_pair oa_var="s_root_status">enabled</config_pair>
<config_pair oa_var="s_web_entry_status">enabled</config_pair>
<config_pair oa_var="s_web_applications_status">enabled</config_pair>
<config_pair oa_var="s_batch_status">enabled</config_pair>
<config_pair oa_var="s_other_service_group_status">disabled</config_pair>
<config_pair oa_var="s_rpcport">1626</config_pair>
<config_pair oa_var="s_webssl_port">4443</config_pair>
<config_pair oa_var="s_ons_localport">6100</config_pair>
<config_pair oa_var="s_ons_remoteport">6200</config_pair>
<config_pair oa_var="s_ons_requestport">6500</config_pair>
<config_pair oa_var="s_webport">8000</config_pair>
<config_pair oa_var="s_active_webport">8000</config_pair>
<config_pair oa_var="s_formsport">9000</config_pair>
<config_pair oa_var="s_metdataport">9100</config_pair>
<config_pair oa_var="s_metreqport">9200</config_pair>
<config_pair oa_var="s_jtfuf_port">9300</config_pair>
<config_pair oa_var="s_mwaPortNo">10200-10205</config_pair>
<config_pair oa_var="s_mwaTelnetPortNo">10200,10202,10204</config_pair>
<config_pair oa_var="s_mwaDispatcherPort">10800</config_pair>
<config_pair oa_var="s_java_object_cache_port">12345</config_pair>
<config_pair oa_var="s_oacore_jms_portrange">23000-23004</config_pair>
<config_pair oa_var="s_forms_jms_portrange">23500-23504</config_pair>
<config_pair oa_var="s_home_jms_portrange">24000-24004</config_pair>
<config_pair oa_var="s_oafm_jms_portrange">24500-24504</config_pair>
<config_pair oa_var="s_oacore_ajp_portrange">21500-21504</config_pair>
<config_pair oa_var="s_forms_ajp_portrange">22000-22004</config_pair>
<config_pair oa_var="s_home_ajp_portrange">22500-22504</config_pair>
<config_pair oa_var="s_oafm_ajp_portrange">25000-25004</config_pair>
<config_pair oa_var="s_oacore_rmi_portrange">20000-20004</config_pair>
<config_pair oa_var="s_forms_rmi_portrange">20500-20504</config_pair>
<config_pair oa_var="s_home_rmi_portrange">21000-21004</config_pair>
<config_pair oa_var="s_oafm_rmi_portrange">25500-25504</config_pair>
</config_section>
</oa_context>Here's the log:
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Thu Nov 05 11:10:16 EST 2009
>> Rapid Wizard source location : /u02/apps/StageR12/startCD/Disk1/rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : oalin12mt.apps.local
Host Operating System : Linux x86-64 (64-bit)
User running Install : root
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Load configuration
Description : Loads an already existing configuration.
Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@16b9e62
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1694eca
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
User action : Load configuration
Description : Loads an already existing configuration.
Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@170984c
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1c220eb
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
User action : Load configuration
Description : Loads an already existing configuration.
Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@b41166
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@103d246
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
User action : Load configuration
Description : Loads an already existing configuration.
Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@19c9f16
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1e7d503
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
User action : Load configuration
Description : Loads an already existing configuration.
Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@287b58
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@95c5ec
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
User action : Load configuration
Description : Loads an already existing configuration.
Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@1f89785
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@109dcbb
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
Maybe you are looking for
-
Generic Resources - Best Practice
Hi, I have been looking at various articles recently and I have come across 4 different suggested methods for using Generic Resources and in particular the Max Units set for each generic resources. Some of these methods appear to be at odds with each
-
Why wont songs purchased from itunes transfer to my media files on pc?
why wont songs purchased on itunes transfer to music library on pc?
-
Restart after Audio Receiver is shut off
Every time I shut off my Audio Receiver (Apple TV is connected to it via HDMI) I have to rest Apple TV the next time I turn it on. Any suggestions
-
Hi all! I am newbie at swing and i want to ask something.. I create a swing interface with some components but when i call a function and a player component in a JPanel, all the other components of the application disappear! Why? Thank in advance, mu
-
Every time I save a resume template in pages as a PDF it hyphenates words
Can anyone help me fix this annoying problem? I've never encountered it until today !