Inner Join - Not Able to get all records
Hello All,
I am trying to Inner Join between two tables of employee details. The Join will be done Employee ID, DOB and on name. We will have a constraint to check the first 5 characters of their name (substring). This works and get the exact count on SQL query.
But when I translate this to SSIS, where I have done a substring with derived column and Merge Join, the count is wrong.
Join with the employee number and dob - count is same for SQL query and in SSIS
But when we join with name, its not equal.
The Issue is with the name, when an employee has 3 or 4 characters of name like 'abc', join is getting ignored in SSIS. Any help to fix this.
Put Data Viewers on both pipes which are sources for Merge Join and observe the data. Name from one source may be different than Name from other source.
E.g. (Tom ) from first source - 5 letters and (Tom) from second source 3 letters.
So you should probably try considering TRIM of blank spaces when length of Name is less than 5 letters.
-Vaibhav Chaudhari
Similar Messages
-
Not able to get all the results if i use "get-spdeletedsite" command
Hi everyone,
I am not able to get all the results when I use the below powershell command.
get-spdeletedsite -limit all
It is giving me only one site, but infact we have more than 100 deleted sites.
If I use the normal command like below it is giving the below output
get-spdeletedsite
Can any one tell me, how can I get all the deleted sites ?
Best Regards
Anil AlladiHi Anil,
For the Limit parameter of Get-SPDeletedSite cmdlet, when we specify its value to ALL, it will return all site collections for the given scope.
For your scenario, the script “Get-SPDeletedSite –Limit ALL” will return all deleted site collections in your SharePoint environment.
If you want to get all deleted site, you can export the result to csv as below:
Get-SPDeletedSite | export-csv out.csv -notypeinformation
Reference:
http://technet.microsoft.com/en-us/library/hh286316(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
I am not able to get all songs from my Iphone. it said ask the computer for permission
There is no message that says to ask the computer for permission.
EXACTLY what were you doing, and what is the EXACT error message? -
FBL3N Report -not able to get all the transaction code details
Hello,
when FBL3N report ran for one the expenses account (time paid off - project charges account) , only few line items are displaying the transaction code like CJ88 and CJ8G.
can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
What I need to do, to get all the T- codes in the report ?
I really appreciate your help.
Regards
RadhaI know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all T- codes for all the line items
Thanks
Radha -
Why i am not able to get all the applets which are included in a page
Hi All,
I have two applet which are included in JSF pages, when try to print all the applets which are inculded in web page
Using below code. but it is printing current applet(the applet which is using this code to print),
i am not seeing the other applet in println statement.
what could be reason (well when i made a demo example it is printing all the applets which are included in web page)
and is there any permission issues ( both applet are signed as well).
can you please what could be the reason, thanks in advance.
Enumeration enumw = getAppletContext().getApplets();
while (enumw.hasMoreElements()) {
Applet element = (Applet)enumw.nextElement();
System.out.println("-------------applet name -------------------------------------->"+element.getName());
}HI AndrewThompson64,
thanks for your replay, i have increased dukes,
one more thing i have tried is applet to javascript and from javascript to applet communication,
but still i am not able to get other applet, when i tried call a javascript method i.e. doAlert(s) it calls, but i tried to print
the other applet but it is not displaying it. the following code i have tried.
<SCRIPT>
function doAlert(s) {
alert(s);
alert(document.FloorPlanView);
alert("FloorPlanView "+document.applets["FloorPlanView"]);
alert("0 "+document.applets[0]);
alert("1 "+document.applets[1]);
alert("ScheduleProfileApplet "+document.ScheduleProfileApplet);
</SCRIPT>let me tell you how the applet included in the webpage.
mainmodule which include two jsp pages jsppage1.jsp and jsppage2.jsp
and in jsppage1.jsp which includes a JSF page and it contains Applet
<jsp:include page="ScheduleModule.jsp"/>and similarly same for the second applet.
I need to look at applet communication through socket programing
any help will be appreciated. -
Not able to get the records in PAYR
Hi,
I created one payment method as K for Bank Transfers.
I done necessary settings like assign payment medium program, house bank, bank accounts also.
in f110 it is working fine but i am not able to these payment information in PAYR table.
guide me
sateeshHello,
Table PAYR is check related information. However, you have generated for bank transfer. So no data appearing in PAYR.
When run F110 for payment method checks, you will have data in PAYR.
Regards,
Ravi -
Not getting all records in pagination
I am also have a problem getting all records in the report as the post on Apr. 21,2004. My reports pagination stops at 500. When I set the 'max row count' to 100000. The pagination at the bottom of my page disapears. When I leave 'max row count' empty, it only goes from 1-500. No way to view records past the 500th record.
I see there was a post on Apr. 21, 2004 about the same thing but it did not specify a fix or work around or if I'm missing a setting. (also tried the log off/on but did not help).
*My pagination Scheme is 'Row Ranges 1-15 16-30 in select list(wiht pagination)'
*My report has 1000+ records.
Thanks, PaulaThe actual number of rows supported by the select list depends on how many rows you show on each page. If you go with the default of 15 rows, you would be able to use the select list with close to 5000 rows. If you increase the number of rows per page, the select list will work with even more rows.
If the select list can't be used, it may make sense to consider using the "row ranges with set pagination" style. Set pagination lets you navigate from one set to the next instead of one page to the next, so you can navigate through your result set a lot quicker.
However the best option for reports with that many rows would be "row ranges x-y", without showing the total number of rows. The reason is that the report renders a lot faster if you don't have the total number of rows calculated. In order to better be able to find certain records, I would recommend a search field on your report page that lets you filter the result set.
Hope this helps,
Marc -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??
I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.
-
I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?
Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!
-
Not able to see all the records thru RSA3.
Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
GeethaHi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK -
I recently travel to asia and lost/forgot my ipad on the plane. I did not register the ipad so i dont know the serial number. Can i still lock it so no one can use it? Also, if i buy a new one would i be able to get all my apps and movies back in?
Did you set iCloud and Find My iPad?
Find My iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/f4796b99e4c16f42f5 1dc09247b5c667_zpsf7c21f3e.jpg -
Not able to get the data from 2LIS_04_P_ARBPL
Hi all,
I am not able to get data for info object 0Calday in PP Cube.
So I checked as per the data flow
So from Datasource 2LIS_04_P_ARBPL its not getting data for that particular object
I check in RSA3 its showing " 0 records extracted"
So I have checked in LBWE to check from which tables its getting data.
So there I found its getting data from 3 tables AFKO, AFPO and AFVG.
When I am checking the tables data am able to open AFKO and AFPO but
for AFVG its saying "No active table available".
and the infoobject 0calday is mapped with Posting date of AFVG table only.
Can anyone tell me what is the procedure to see the data in that particular table and structrure.
Regards
SankarHi,
please search for the term 'filling of setup table'.
Siggi -
How get all record from master and matching record from detail
hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamirhi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid -
Not able to get data while executing in background for mb52
Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
bwkey type werks_d,
matnr type matnr,
lgort type LGORT_D,
budat type budat,
labst type labst,
endmenge type p decimals 3,
end of w_tab.
DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any . " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
output = output .
commit work.
Thanks in advance.Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi
Maybe you are looking for
-
DVI connection to second monitor doesn't work
When I had the connection from my Mac Pro to my two monitors (20" Cinema display and 19" Princeton monitor), I had the black screens for a few seconds for both monitors then return to normal. It happens anytime. I read the forum and changed the VGA c
-
I want to upgrade my hard drive. Need suggestions.
I have a MacBook (white-early 2009). I am looking into upgrading my hard drive. I want at least 500GB. My budget is $120. I will be doing photo and video editing (not sure if that matters). I saw this one on Amazon and am wondering if it would be com
-
How can I get all my devices to use the same Apple ID?
-
Create New Portal Desktop - EP 7.0
Hi, I need to create a new portal desktop. I import theme file and masthead (par file) and now i do not know to continue... Please, somebody has a tutorial or any help??? p.s.: sorry for poor english
-
I updated to Muse CC 2014 and now it thinks that I'm a trial user. Why?
I updated to Muse CC 2014 and now it thinks that I'm a trial user. I have a single app creative cloud subscription for Adobe Muse CC. Why does Muse CC 2014 think I am only a trial user?