Input Query with blanks when we press transfer values option

I have an input query with 12 restricted key figures, but when I enter data and press on 'Transfer Values' or 'Save Values', the cells are blanked out (i.e. the values dissapear) and the data is not updated into the cube. I have done the following:
In Query Designer, I have checked the attribute 'Start Query in Change Mode' and
For all restricted key figures that needs to be planned, I have marked as 'Data can be changed using user entries and planning functions...'
Can you please let me know your thoughts around this.
Thanks,
Srini

Mayank,
I have 10 characterstics(cost center, cost element, cost type, fiscal year period,fiscal year, version, value type, posting period, detail valye type, currency type+1kf(0amount)) in my aggregation level.
I have created 12 rkf for each month with the following restrictions
Plan rkf (sub rkf) with restrictions to
fiscal year(variable), inforprovider-real time cube, value type 20, kf-0amount,
jan plan rkf.....dec plan rkf has
kf--Plan rkf(sub rkf) + posting period 1...12(one for each month),
And i have created an input query with the following fields
unders rows
Cost type, cost element
under Columns
Jan paln rkf to Dec plan rkf
filters for controlling area EA
I have change the query defination to "start query change mode" and also set all the rkf properties to "change by user enteries and/or planning options"
So, is there anything i am missing here?
Do i have to all characterstics of my aggregation level in my input query? or do i have to restrct my rkf to any curreny/unit fields? Please shed some light in here....:)
Thanks for your help...
Srini

Similar Messages

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.

This Apple Tech Note explains the process:
http://support.apple.com/kb/ht1848
It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items.

Input query with dynamic actual & forecast values by month per year

Hello,
I am working on a Input ready query for a forecasting application which shows both actuals and forecast numbers and the user will revise the forecast numbers by month
Requirement: I want to build a Input query for monthly forecasting for the current year. It will be dynamic rolling of months with actuals & forecast data.
E.g. My report has 12 months for the current year
and if run the report in May, the months before May has to show the actuals and the months after May has to show the old forecast data so that the user will revise the numbers again in each month and save the data to the real time cube.
Jan.Feb.Mar.Apr.May.Jun.Jul.Aug.Sept.Nov.Dec
Act Act Act Act Act Old frcst for the remaining months
user will revise forecast for these months
So, i am able to create Input query with all restricted key figures( plan kf has change mode set to change, actual kf are not set change) and calculate key figures and all the logic is done on dynamically moving/rolling the data based on the input month of the year.
But the problem is that i am using cal kf to dynamically roll months, i was not able to set the change option for the cal kf.
So, how can i make sure that the dynamically changed plan months will open for entering forecast and the actuals months not to change?
Do you guys have any better solutions in implementing it?
I really appreciate it your input....:)
Thanks,
Srini

Hi,
Please look at the following DOC which may be useful to you and if so please grant me point.
Regards,
SUbha'
Input-Ready Query
Use
You use input-ready queries to create applications for manual planning. These can range from simple data entry scenarios to complex planning applications.
Integration
You define a query that you want to use for manual planning in the BEx Query Designer (see Defining New Queries).
In the Web Application Designer or the BEx Analyzer, you can combine the input-ready queries with other queries and planning functions to create complex planning applications.
Prerequisites
You can define an input-ready query on any of the following InfoProviders:
●     Aggregation levels (see Aggregation Levels)
●     MultiProviders that include at least one simple aggregation level
The aggregation levels are created in the planning modeler; MultiProviders are defined in the modeling functional area of the Data Warehousing Workbench.
Features
Definition of an Input-Ready Query
Once you have defined a query on an InfoProvider, you see the Planning tab page under the Properties of structural components (for example, in key figures or restricted key figures). The options provided there allow you to determine which structural components of an input-ready query are to be input ready at runtime and which are not. With structural components that are not input ready, you can also determine whether these components are viewed as reference data or are just protected against manual entry.
For the structural components, you also have the following options:
Input readiness of structural components of a query
Option
Description
Not input ready (reference data)
If they are being used as reference data, the structural components are not protected by data locks to ensure exclusive access for one user because this data serves as a reference for many users.
This is the default setting.
Not input ready (no reference data)
If you want to protect structural components against manual entries but allow changes by planning functions, you can use locks to protect this data for one particular user. In this way you can ensure that the planning function works with the displayed data only and not with data that has been changed by other users.
Input ready
You can also determine whether an input ready query is to be started in change mode or in display mode. You find this property in the Query Properties on the Planning tab page. If there is at least one input-ready query component, the query (as long as it has not been determined otherwise) is started in display mode.
In BI applications that use input ready queries as data providers, you can enter data manually at runtime. For more information, see Performing Manual Planning and Creation of Planning Applications.
Example
You want to create an input-ready query for manual planning for a plan-actual comparison of revenues for a set of products. You want the plan data in a real-time-enabled InfoCube and the actual data in a standard InfoCube.
       1.      Create a MultiProvider that includes the InfoCubes for the plan and actual data.
       2.      Define an aggregation level on the MultiProvider which contains the characteristic Product and the key figure Revenue.
       3.      On the aggregation level, create two restricted key figures Plan Revenue and Actual Revenue. For restriction, choose the characteristic 0INFOPROV and restrict it to the plan or actual InfoCube.
       4.      Add the restricted key figures to the key figure structure. Insert Product into the rows. For Plan Revenue, choose Input Ready for the input-readiness option. For Actual Revenue, choose the option Not Input Ready (Reference Data).
       5.      In the query properties, set the indicator that determines whether the queries are started in display or change mode as required.
Example of an input-ready query
Product
Plan Revenue
Actual Revenue
P01
20
P02
30
If you want to keep actual and plan data in a real-time enabled InfoCube, you do not require a MultiProvider for the task described above. Create an aggregation level on the InfoCube and define the input-ready query for the aggregation level. In the example above, a version characteristic acts as the InfoProvider. Create restricted key figures with the plan or actual version and proceed as in the previous example.

ADF how can i execute a query with parameters when the page renders

hi
i am using ADF web 11g
i need to execute a query with parameters when the page renders
thanks

hello,
I'm a fan of Java code, I really am.
But when you use ADF, you decided to move to a more declarative environment.
So why not do it declarative, the adf way?
In your pagedef insert a action binding.
This can be anything, a call to the application module, a call on the iterator(Like executeWithparams, etc.)
Create an invokeAction in your pagedef and set the condition.
This example refreshes(Action 2 is execute query) the data.
First the method binding:
    <action IterBinding="PersoonIterator" id="Execute" InstanceName="LSAppModuleDataControl.Persoon"
            DataControl="LSAppModuleDataControl" RequiresUpdateModel="true" Action="2"/>And the invoke action
    <invokeAction Binds="Execute" id="refreshData"/>This always refreshes the data on page entry, but anything is possible, you can set condictions for the invokeAction.
-Anton
PS Yes I know that pagedefs become backing beans in the end and yes that is Java code, but if you wanna play the ADF way, the goal is the reduction of Java code and the increased performance of declarative programming.

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

Hi have you solved the issue ?
Cause I have the same problem.
Tnx

Pass Input Parameter With Blank To SSIS Get Strange Result

Hi! I stuck for a while when executing SSIS from stored procedure with input parameter. My input value is not consistent with output one. If I pass value with blank , SSIS seems gets second part. For example , if I pass "CALL FROM SP", SSIS get
"FROM" only.
I use Execute SQL Task to store input parameter. Here is the SSIS snapshot.
And here is the sp snippet
DECLARE @Path VARCHAR(200),
@Cmd VARCHAR(4000),
@ReturnCode INT,
@QUERY_STRING VARCHAR(70),
@BATCH_NO VARCHAR(14)
SELECT @Path = 'xxxxxx'
SELECT @QUERY_STRING = 'CALL FROM SP'
--BatchNo = YYYYMMDDHHMMSS
SELECT @BATCH_NO = CONVERT(VARCHAR(10),GETDATE(),112) + REPLACE(CONVERT(VARCHAR(8),GETDATE(),108),':','')
SELECT @Cmd = 'DTexec /FILE "' + @Path + 'Package1.dtsx" /MAXCONCURRENT 1 /CHECKPOINTING OFF /REPORTING EW ' + '/Decrypt ALCM '
+ ' /SET \Package.Variables[User::BATCH_NO].Properties[Value];' + @BATCH_NO
+ ' /SET \Package.Variables[User::QUERY_STRING].Properties[Value];' + @QUERY_STRING
My test are
input parameter
write to TESTTB correctly ?
any error?
execute SSIS in design mode
CALL FROM SSIS
YES
execute SSIS by sp
CALL FROM SP
NO
Option "FROM" is not valid.
execute SSIS by sp
CALL_FROM_SP
YES
Anyone could give me some hint ?
Thank you so much!!

Hi Nick,
It occurs because an argument of the DTExec commands must be enclosed in quotation marks if it contains a space. From the dtexe (SSIS Tool): Syntax Rules section of the
dtexec Utility (SSIS Tool) document, we can see:
All options must start with a slash (/) or a minus sign (-). The options that are shown here start with a slash (/), but the minus sign (-) can be substituted.
An argument must be enclosed in quotation marks if it contains a space. If the argument is not enclosed in quotation marks, the argument cannot contain white space.
Doubled quotation marks within quoted strings represent escaped single quotation marks.
Options and arguments are not case-sensitive, except for passwords.
So, you need to make the value of the variable @QUERY_STRING within double quotes in the value of the variable @Cmd or remove the space within the @QUERY_STRING value.
Regards,
Mike Yin
TechNet Community Support

Select query with blank date

Hi All,
I have issue with my select query, this query should execute when the date is empty in the table. Fields for the date is (trrecv and trpay)
code:
SELECT * FROM zcat3_mov
                   INTO CORRESPONDING FIELDS OF
                   TABLE lt_invmov
                   WHERE bukrs EQ zcat3_mov-bukrs
                   AND trans EQ zcat3_mov-trans
                   AND status EQ 'CD'
                   AND clear EQ ' '
                   AND trrecv EQ ' '
                   AND trpay EQ ' '.
Thanks,
FED

Hi,
to check for blank date fields in database tables always use :
date1 = '00000000'
so your query will be -
SELECT * FROM zcat3_mov INTO CORRESPONDING FIELDS OF TABLE lt_invmov
                        WHERE bukrs EQ zcat3_mov-bukrs AND
                              trans EQ zcat3_mov-trans AND
                              status EQ 'CD'             AND
                              clear EQ ' '              AND
                              trrecv EQ '00000000'       AND
                              trpay EQ '00000000 '.
regards,
Shaurabh Pandey

Report and ready for input Query, with similar shadings are confusing

Some customers mix report and planning queries in their templates.
usually the shades for PLAN Queries are
o white - ready vor input
o blue- display data (e.g. LY, calc KPI)
In a Query with NO INPUT ready Cells the query has a zebra shading, blue and white, row by row.
That is confusion for users if they believe every Number on a white background can be changed.
Is it possible to change the shading for reporting queries to blue only?
Best Regards,
Georg

Hi.
You can cancel zebra by setting off for ALTERNATE_STYLES in properties if analysis item in WAD, BUT it sets all cells as WHITE and not blue.
I dont know how it will be usefull, but you may try ...
Regards.

Error When clicking on Transfer Music Option

When using Nokia PC Suite, If I click on the transfer music option, I get an error report. I have tried reinstalling the software and downloaded the latest version with no joy.
I can get the software to work on other machines so i no lead and phone are ok.
PC runs XP with service pack 2 and the latest version on PC Suite.
Any Idea's anyone?

I have the same problem.(got the last version from Internet)
Microsoft error report says it has something to do with QuickTime and that there is no solution at the moment.
I will try to uninstall QuickTime and check it out again somewhere today...

What is done by Flash when you press "Show all" option???

Hello,
I need technical information. I'd like to know which kind of resizing is done by Flash when you press the "Show all" option. What differences between "Show all" and 100% are there???
I'm programming an application and the Flash Player Proyector always has the "Show all" option enabled modifying the size of my content!!!!!
Thanks in advance.

https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you#w_wheres-all-my-data

Do not find the option for windows when I press the the option key during restart, since I downloaded Lion

I still do not find any option for windows when I restart my mac when pressing the option key. It used to go to windows when I pressed the option key during a restart but since I have downloaded Lion, it always go to mac. I do not want to make a permanent switch. ANy suggestions on how to get back to using the option key?

You probably need to reinstall your Windows machine.
I'm not certain, but I have a feeling the install of Lion wipes it out, going by the number of threads started along similar lines since Lion's release.

Replacing the a specific date in a query with blank

I have a report that customers run and within it they are wanting to replace a field when it equals a specific value - in this case when the sale date equals 31/12/9999 - we do not want to remove the row only replace that cell value with a blank - Does anyone know if this is possible within the query or will it mean a back end change?

sorry, you can only lookup stock in subcontract stock type, you cannot do it individually by vendor.
Edited by: Jürgen L. on Jun 22, 2010 12:51 PM

Jvm startup fails with error when using large -Xmx value

I'm running JDK 1.6.0_02-b05 on RHEL5 server. I'm getting error when starting the JVM with large -Xmx value. The host has ample memory to succeed yet it fails. I see this error when I'm starting tomcat with a bunch of options but found that it can be easily reproduced by starting the JVM with -Xmx2048M and -version. So it's this boiled down test case that I've been examining more closely.
host% free -mt
total used free shared buffers cached
Mem: 6084 3084 3000 0 184 1531
-/+ buffers/cache: 1368 4716
Swap: 6143 0 6143
Total: 12228 3084 9144
Free reveals the host has 6 GB of RAM, approximately half is available. Swap is totally free meaning I should have access to about 9 GB of memory at this point.
host% java -version
java version "1.6.0_02"
Java(TM) SE Runtime Environment (build 1.6.0_02-b05)
Java HotSpot(TM) Server VM (build 1.6.0_02-b05, mixed mode)
java -version succeeds
host% java -Xmx2048M -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
java -Xmx2048M -version fails. Trace of this reveals mmap call fails.
mmap2(NULL, 2214592512, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = -1 ENOMEM (Cannot allocate memory)
Any ideas?

These are the relevant java options we are using:
-server -XX:-OmitStackTraceInFastThrow -XX:+PrintClassHistogram -XX:+UseLargePages -Xms6g -Xmx6g -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=128m -XX:MaxPermSize=192m -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+ExplicitGCInvokesConcurrent -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.awt.headless=true
This is a web application that is very dynamic and uses lots of database calls to build pages. We use a large clustered cache to reduce trips to the database. So being able to acces lots of memory is important to our application.
I'll explain some of the more uncommon options:
We use the Concurrent Garbage collector to reduce stop the world GC's. Here are the CMS options:
-XX:+UseConcMarkSweepGC
-XX:+CMSClassUnloadingEnabled
-XX:+CMSPermGenSweepingEnabled An explicit coded GC invokes the Concurrent GC instead of the stop the world GC.
-XX:+ExplicitGCInvokesConcurrentThe default PermSizes where not large enough for our application. So we increased them.
-XX:PermSize=128m
-XX:MaxPermSize=192mWe had some exceptions that were omitting their stack traces. This options fixes that problem:
-XX:-OmitStackTraceInFastThrowWe approximate between 10% to 20% performance improvement with Large Page support. This is an advance feature.
-XX:+UseLargePagesUseLargePages requires OS level configuration as well. In SUSE10 we configured the OS's hugepages by executing
echo "vm.nr_hugepages = 3172" >> /etc/sysctl.confand then rebooting. kernel.shmmax may also need to be modified. If you use Large Page be sure to google for complete instructions.
When we transitioned to 64bit we transitioned from much slower systems having 4GB of ram to much faster machines with 8GB of ram, so I can't answer the question of degraded performance, however with our application, the bigger our cache the better our performance, so if 64bit is slower we more than make up for it being able to access more memory. I bet the performance difference depends on the applications. You should do your own profiling.
You can run both the 32bit version and the 64bit version on most 64bit OSes. So if there is a significant difference run the version you need for the application. For example if you need the memory use the 64bit version if you don't then use the 32bit version.

How to write multi row sub query with the row containing range of values?

Hi all,
I have to include a column which contains weight ranges and it should come fom table called "report_range_parameters"
The following query will reutrn those weight ranges.
select report_parameter_min_value || ' -> ' || report_parameter_max_value
          from report_range_parameters
         WHERE report_range_parameters.report_parameter_id = 2359
           and report_range_parameters.report_parameter_group = 'GVW_GROUP'
           and report_range_parameters.report_parameter_name = 'GVW_NAME'
                    The below query should return the values group by those weight ranges.
How could I write that sub query?
select   SUM(NVL("Class 0", 0)) "Class 0" ,
            SUM(NVL("Class 1", 0)) "Class 1" ,
            SUM(NVL("Class 2", 0)) "Class 2" ,
            SUM(NVL(" ", 0)) "Total"
     FROM (
             SELECT report_data.bin_start_date_time start_date_time,
                    SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
                    SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
                    SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
                    SUM(NVL(report_data.gvw_count, 0)) " "
              FROM report_data
             GROUP BY report_data.bin_start_date_time
          ) results
   RIGHT OUTER JOIN tmp_bin_periods
                 ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
                AND results.start_date_time < tmp_bin_periods.bin_end_date_time
           GROUP BY tmp_bin_periods.bin_start_date_time,
                    tmp_bin_periods.bin_end_date_time Thanks.
Edited by: user10641405 on Jun 15, 2009 3:14 PM
Edited by: user10641405 on Jun 15, 2009 3:17 PM

Hi,
Assuming the following 4 things:
(1) report_range_parameters contains data like this, from your [previous thread|http://forums.oracle.com/forums/message.jspa?messageID=3541079#3541079]
id group      name         min_value      max_value
1   gvw_group gvw_name      0              5
2   gvw_group gvw_name      5              10
3   gvw_group gvw_name     10              15(2) max_value is actually outside the range (that is, a value of exactly 5.000 is counted in the '5->10' range, not the '0->5' range)
(3) the range has to match some column x that is in one of the tables in your main query
(4) You want to add that column x to the GROUP BY clause
then you shopuld do somehting like this:
select   SUM(NVL("Class 0", 0)) "Class 0" ,
            SUM(NVL("Class 1", 0)) "Class 1" ,
            SUM(NVL("Class 2", 0)) "Class 2" ,
            SUM(NVL(" ", 0)) "Total"
,         report_parameter_min_value || ' -> ' || report_parameter_max_value     AS weight_range          -- New
     FROM (
             SELECT report_data.bin_start_date_time start_date_time,
                    SUM(DECODE(report_data.gvw, 0, report_data.gvw_count, 0)) "Class 0" ,
                    SUM(DECODE(report_data.gvw, 1, report_data.gvw_count, 0)) "Class 1" ,
                    SUM(DECODE(report_data.gvw, 2, report_data.gvw_count, 0)) "Class 2" ,
                    SUM(NVL(report_data.gvw_count, 0)) " "
              FROM report_data
             GROUP BY report_data.bin_start_date_time
          ) results
   RIGHT OUTER JOIN tmp_bin_periods
                 ON results.start_date_time >= tmp_bin_periods.bin_start_date_time
                AND results.start_date_time < tmp_bin_periods.bin_end_date_time
   LEFT OUTER JOIN report_range_parameters                                        -- New
                ON x >= report_parameter_min_value                                    -- New
          AND x < report_parameter_max_value                                   -- New
                AND report_range_parameters.report_parameter_id = 2359                         -- New
                and report_range_parameters.report_parameter_group = 'GVW_GROUP'               -- New
                and report_range_parameters.report_parameter_name = 'GVW_NAME'                    -- New
           GROUP BY tmp_bin_periods.bin_start_date_time,
                    tmp_bin_periods.bin_end_date_time
              , x                                                       -- New

Input Query with blanks when we press transfer values option

Similar Messages

Maybe you are looking for