Input required - when line size exceeds more than 1023

hi all,
in my ouput i have to display 64 fields which exceeds the length of 1023. if i enter greater than this value it is showing syntax error like max line size is 1023.so what shall i do in this case.
thanks,
maheedhar.t

Hi
U have to split the line.
If you show list created by yourself, it should be better to use the ALV functions, they'll automatically sets the layout in order to produce a list no longer than 1023 and the user can choose which fields to be hidden.
If you needs to show all fields, u have to split the line and show the fields in several lines (perhaps 2 lines are enough).
Max

Similar Messages

  • How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

    Hi all,
    i am facing problem while generating Test Result word document after successful execution of TestStand.
    The Problem is :
    i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
    Example:
    Page  No. 1
    |     Test case Number  |  Test Step number      |
    |      100                         |            100                   |
    Page  No. 2
    |     Test case Number  |  Test Step number      |
    |      200                         |            300                   |
    Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
    Please through light on this.
    Regards,
    Susa.

    Hi Santiago,
    Thank you very much for your valuable reply.
    i want to generate MS-word report for TestStand after successful testing using MS-word2000.
    Test report contains Actual values, Expected values and Pass/Fail status.
    In my program i have customized all  fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
    To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
    insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header  but it start with  values of above said parameters.
    so i'm not able to repeat table row header for each page.
    Please find the attached file for your reference.
    Attched file expected.doc  :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
    Attached file Actual output from source code.doc   :  This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
    Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
    i think this information is sufficient for you,
    Still if you need some information please ask me.
    Thanks
    Susa.
    Attachments:
    Actual output from source code.doc ‏25 KB
    expected.doc ‏26 KB

  • Unable to view image if the size is more than 3KB using XML Publisher.

    Hello,
    We are printing PO approver signature using xml publisher (rtf) on a pdf.
    If the size of the image is 3KB or less, the image gets printed.
    But, if the size is more than 3KB the image does not get printed.
    Additional Info:
    1. The signature is stored as jpg image in fnd_lobs table.
    2. On following code is mentioned in the rtf
    <fo:instream-foreign-object content-type="image/jpg">
    <xsl:value-of select="IMG_SIGNATURE"/>
    </fo:instream-foreign-object>
    3. We are using the following function that converts BLOB to CLOB.
    CREATE OR REPLACE FUNCTION XX_BLOBTOBASE64
    b IN BLOB
    RETURN CLOB
    IS
    sizeb PLS_INTEGER := 4080 ;
    buffer RAW(4080);
    offset PLS_INTEGER DEFAULT 1;
    RESULT CLOB;
    BEGIN
    -- dbms_lob.createtemporary
    -- lob_loc => RESULT
    -- , cache => FALSE
    -- , dur => dbms_lob.CALL
    -- LOOP
    -- BEGIN
    -- dbms_lob.READ
    -- ( lob_loc => b
    -- , amount => sizeb
    -- , offset => offset
    -- , buffer => buffer
    -- EXCEPTION
    -- WHEN no_data_found
    -- THEN
    -- EXIT;
    -- END;
    -- offset := offset + sizeb;
    -- dbms_lob.append
    -- ( dest_lob => RESULT
    -- , src_lob => to_clob(utl_raw.cast_to_varchar2(utl_encode.base64_encode(buffer)))
    -- END LOOP;
    DBMS_LOB.createtemporary(lob_loc => RESULT, CACHE => FALSE, dur => 0);
    Wf_Mail_Util.EncodeBLOB ( b, RESULT );
    RETURN RESULT;
    END;
    Requesting any of you to let us know if there is any method to resolve this issue.
    Thanks,
    Angelica.

    Hi,
    Are you using Outlook.com to send/receive emails? Based on my research, we can only add an image/ picture in your e-mail signature that’s Web based (picture that is available in existing websites or stored in an online storage). See:
    http://answers.microsoft.com/en-us/outlook_com/forum/osettings-oemailset/add-logo-to-outlookcom-signature/4455facf-0926-42a6-aad7-756de662a865
    Since this forum is for general questions and feedback related to Outlook desktop application, if you are using Outlook.com, I'd recommend you post your question in the Outlook.com forum:
    http://answers.microsoft.com/en-us/outlook_com/forum?tab=Threads
    The reason why we recommend posting appropriately is you will get the most
    qualified pool
    of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Export to Text failing when Report height is more than 23 inches

    I have a problem while exporting to Text, when report height is more than 23 inches. It's failing with "an unhandled exception occurred in crw32.exe [3856]"
    Both Crystal Reports 2008 and Crystal Reports XI Release 2 are failing. Export to PDF is working fine.
    I am trying to design a lengthy report and export to text.
    I searched in forum with out any results.
    It would be great, if some body can point me in right direction. Thank you.
    Regards,
    Raveendra

    Hi Raveendra
    To work around this error message, disable DEP by performing the following steps:
    1. Click Start > Settings > Control Panel.
    2. Double-click 'System'. The "System Properties" dialog box appears.
    3. Click the 'Advanced' tab.
    4. Click 'settings' under 'performance'.
    5. Click the 'Data Execution Prevention' tab
    6. Select 'Turn on DEP for all programs and services except those I select:'.
    7. Click 'Add'.
    8. Browse for the application CRW32.exe. This file is located in:
    C:\Program Files\Business Objects\Crystal Reports 12\
    9. Select CRW32.exe and click 'Apply'.
    10. Click 'OK' to close the 'System Properties' dialog box.
    11. Log on as an Administrator and start Crystal Reports.
    Now try to export report to the text format and observe the behavior.
    Regards
    Girish Bhosale

  • TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem.  Autorun only shows the Bonjour service.  It started when try to sync more than one iphone.

    This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem. 
    Autorun only shows the Apple Bonjour service.  It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%.  It is the AppleMobileDeviceService.exe process.

    For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart.  Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem.  Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
    Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant.  I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

  • Creating form - want to change font style and size in more than one field at a time HOW??

    creating form - want to adjust font style and size in more than one field at a time - HOW??

    Select the fields with the mouse, right-click one of them, go to Properties
    and set the settings you'd like them all to have.
    On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]>

  • Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

    Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

    Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Line Chart with more than 15 datapoints

    I'm using Apex 3.1.
    I am trying to create a line chart with more than 15 data points. Apparently 15 is the default. Question is, How do I change the default?
    The Wiki has advice for changing the "Maximum Rows" parameter, but "Maximum Rows" is not to be found, either in the chart attributes or series attributes.
    http://wiki.shellprompt.net/bin/view/Apex/ChartIssues
    I have encountered this limitation with SVG line charts and Flash line and scatter charts. Seems like it must be an easy thing to figure out; I feel embarassed asking such a question. But I've been through all the application property pages, much of the documentation, and several tutorials... Where can I change this? It's driving me nuts!
    Thanks
    Fred

    Hello,
    Which version of APEX are you using?
    Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://apex-evangelists.com/
    -- http://apexblogs.info/

  • Cant  we create a custom PA infotype whose size is more than 1000 chars?

    can we create a custom PA infotype whose size is more than 1000 characters
    i have tried this way i have given 4 fields in PM01 transaction with the data element 255 so the total size is 1020 it is throwing an error. pls help......

    Hi,
    as described in the following documentaion the length of the data could be 1500 bytes.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm
    Regards
    Bernd

  • How we will know that dimension size is more than the fact table size?

    how we will know that dimension size is more than the fact table size?

    Hi,
    Let us assume that we are going to take Division and distribution channel in a dimension and assume we have 20 distinct values for Division in R/3 and 30 Distinct values for Distribution channel .So Maximum, we can get 20 * 30 records in dimension table and we can take rough estimation of records in the cube by observing the raw data in source system.
    With rgds,
    Anil Kumar Sharma .P

  • When will Apple offer more than just THEIR brand of cases for the 6 Plus?

    I bought a Project Red leather case for my 6 Plus.  I have also ordered a Tech 21 case, but the shipping from the UK was $15.  I'd love to be able to order a couple of more Tech 21 cases, but I don't want to pay high shipping costs like that again. 

    Yes, I have.  I want Tech 21 since it is my favorite brand.  However, they are from the UK and it costs around $15 to ship to the U.S.  Apple generally has some awesome Tech 21 cases and I'm hoping that they'll offer them soon for the 6 Plus.  Any idea when Apple will offer more than just their brand on their online store?  The closest Apple retail store is a couple of hours from me....

  • Profit Center Substitution Rules are exceeding More than 999 Rules

    Hi Experts,
         (Transaction Code GGB1) Profit Center Substitution Rule are exceeding More than 999 Rules. And there is a need of substitution rules to create.
    Please suggest me if any User Exists are available or alternative solutions through wich i can determine the profit center in sales order and same profit center can be transfer to FI as well as CO...
    Regards,
    Shivaji

    In the substitution you can use the option EXIT
    click on the help and go from  there:
    In table T80D you have to assign the exit name
    There are example ABAP's the standard one yopu have to replace in the table with a z version.
    Perhaps an other option is to de redesign from you substitutins, by using perhaps set's

  • Why does does my MacbookPro screen keeps shutting off when I open it more than halfway?

    I Have a very new Mac, and for some reason, the screen goes black when I open it more than halfway. It happens to all the users, and even if it is or isn't charging. The brightening keys also doesn't do anything for it. I don't know if this is connected, but I also have half of the lights on at the dock, it kind of looks like lights on a stage.......
    please help if you can. i can't live like this anymore! 

    Anything that is repeatable can be fixed at the genius bar.
    You appointment for an evaluation is free at an Apple store, in warranty or out.

  • When I update applications more than one account appears.  How do I delete second account

    when I update applications more than one account appears.  How do I delete second account?

    I'm wondering if you have to Apples IDs or iTunes IDs and have puchased apps on both accounts.I have the same issue, and must supply both accounts' passwords in order to update apps. From my research here, there's no way to merge the two accouts. It is aggrivating, indeed.

  • Lines size to less than 0,29cm?

    It is possible to reduce the lines size to less than 0,29cm?

    I don't know what the minimum is in centimeters but 0,29 sounds pretty close.
    What is your goal? Why do you need/want it smaller?

Maybe you are looking for