InScope option for transactions is not existing in solar01

Hi,
It was observed in Solar01 for the existing projects that Inscope option for transaction is not existing in Solar01.
Kindly suggest how it was appearing for few and not for some projects .

Hi Hazira,
In scope option is not available for template Projects, as while creating the these projects all are in scope.
But for implementation & maintenance projects , we have the scope function availability for maintaining of transactions scenario & processes wise.
Thanks & Regards,
Sandeep

Similar Messages

Posting keys for account determination for transaction do not exist

Dear SAP Gurus,
While release to accounting service sale billing bellow error occurs while i made all necessary changes in VKOA.
Posting keys for account determination for transaction do not exist
Please guide me to coorect this error.
With Regards
MK

Dear IMUKUL,
Please search the forum before posting.
Check the following thread and see whether it helps you.
CIN Error
Kindly make it a point to search forum before posting
Thanks & Regards,
Hegal K Charles

[SOLVED] database file for multilib does not exist

Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)

bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59)

ST06N transaction does not exist

Hi
We have upgraded the SAP NetWeaver 2004s support package stack level from 23 to 26, after that when we are executing the transaction ST06N - we are getting error message below the screen "ST06N transaction does not exist"
for that the program name we can able to execute in T code SA38 Program name RSHOST1N
thru the T code its showing the Message ST06N transaction does not exist,
Could pls guide us
Regards
Sriram

Hi Rupali
Thanks for your support as per your advice we can do that with help of Abaper
As of now we have upgraded the Support package 26 in Dev & QA. in the Production still i can able to execute the T code ST06N, My query's are Is this any bug or ST06N Tcode obsolete?
is this any one face the same issue ?
Regards
Sriram

Intercompany transaction does not exists

Hi,
I am have posted entry in F-02 and also i have asigned a new company code to the transaction and also document got created.
now i need to reverse the document for the reversal reason 1 in T.Code FBU8.
I am getting error message " Intercompany Transaction does not exists".
Please help me with this issue.

dear
check settings in OBYA. is clearing account configured for intercompany postings
and check that in OBA7 for the document type you using allow intercompany postings.
regards
rohit
Edited by: ROHITBALI on Nov 19, 2011 7:28 AM

Idoc INVOIC error Baseline date for payment does not exist

Dear All,
I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
The payment term is correctly maintained in the purchase order.
Idoc message type INVOIC MM.
Baseline date for payment does not exist
Message no. M8356
Diagnosis
You have tried to post a document without a baseline date for payment.
The system will not allow you to do this.
Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
Regards
Arnaud

Hello,
Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
Thanks anyway for your input.
Keep in touch.
Regards
Arnaud

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

Follow-up posting flow type Credit for 870 does not exist

Hi SAP,
I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
Diagnosis
You have changed the data in such a way that follow-up postings have resulted.
No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
System Response
Processing cannot be continued without the flow type.
Procedure
Contact your system administrator.
Procedure for the system administrator
Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
Relevant relationship keys are:
2 IS-RE: Follow-up postings due to condition incr.
32 IS-RE: Follow-up posting due to condition reduct.
You have to assign reference flow types for these relationship keys.
This should help.
Regards, Franz

Endpoint Protection error: The source folder for content does not exist.

I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!

Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:47 AM   5920 (0x1720)

ITunes option for "SYNCH" is not operable. Also, the "device" does not sho

iTunes option for "SYNCH" is not operable. Also, the "device" does not show up on the list as being connected, so I cannot sync any of the Ipods we have. I've updated, deleted and reinstalled iTunes and still not able to sync. The main menu that usually pops up when you connect your Ipod to the computer doesnt happen either....help please
FeelnPreti

Welcome to AD!
Do you know what changed on your PC? Try a differetn USB port or iPod cable.
Here is an article with a list of other things to check.
http://support.apple.com/kb/TS1369

Getting 'taglib directive for "f" does not exist or TLD is not found'

Hi,
I'm using Eclipse 3.4 and when I open my JSF page in Eclipse, I'm getting red "x"'s next to my JSF directives. For example,
<f:view>
has a red "x" along the left margin and when I roll over it, it gives me the error, 'taglib directive for "f" does not exist or TLD is not found.' This is odd because I have the appropriate directives, including
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
at the top of my page. Strangely, the "<%@" portion appears in red. Does anyone know how I can get Eclipse to recognize the listed directives?
Thanks, - Dave

Hi, I went to the link
http://java.sun.com/javaee/javaserverfaces/download.html
but following the steps only got to a place where I could download JavaServer(TM) Faces Specification Maintainance Release -- jsf-1_1-mr-spec.pdf. I did not see anywhere on here where I could download the actual jsf-api.jar or jsf-impl.jar files.
Any further clarification you can provide is appreciated, - Dave

Maintenance Dialog for V_T7INDA_OFFGRP does not exist

Hi Friends,
I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
not exist'.
When I went to se54 to create the Maintenance Dialog, I am not able to
see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
Can you please help me how I can creat the Maintenance Dialog for this
view.
Thanks,
Suresh Kumar Paturi

Procedure compiles OK if I replace
SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
by
pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
Thanks

HT2534 Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

Try this support page provided by Apple...
http://support.apple.com/kb/ht2534

Delete exposure in THMEX and FTREX12 - error "Transaction does not exist"

I have transferred by error an exposure (using TFREX12) to HM. In THMEX I have deleted the newly created exposure that has a transaction Nber. Then in TFREX12 I try to reverse this transfer by using in the menu Position the function "Reverse transfer" but get an error message "Transaction xxx does not exist". How can it be deleted so that I can transfer the exposure to the appropriate Hedge Plan??
Thanks
G.

Hi,
correct procedure is to reverse transfer in FTREX12 without deleting the exposure in THMEX. If you deleted it in THMEX first, then the error is justified. To solve the problem, you can manually create an exposure with the same transaction directly in THMEX, then transfer reversal should be possible.
Rgds,
Tomislav

PO/ Invoice created for supplier does not exist for particular company code

Hi Gurus,
We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
As per my analysis:
1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
Thanks for your response.
Best regards,
Karun Kumar

You can create vendor only with reference to purchase organization and withoout company code.
for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
So in your case, your analysis is correct.

InScope option for transactions is not existing in solar01

Similar Messages

Maybe you are looking for