Insert Date Using Text Field

Hi,
i have date item ,Can i insert date from text field in dd/mm/yy format.
My Column for date is DATE type in table.
How can i ido this with Text field .
Thanks

I think you want to have text field for user to input the date? (instead of date picker item type)
If you are using custom PL/SQL code, it is fine, because you just use to_date(:Px_DATE_ITEM, 'dd/mm/yyyy'); or whatever format you are expecting, in your insert statement.
If it is a DML process type, I don't think it's possible - apex probably converts the text from the data picker into a date datatype at run time, but not sure it'd do it when its just a text box.
Ta,
Trent
Edited by: trent on Jan 28, 2011 10:57 PM
I take that back. So long as you have specified the application date format in the globalization attributes, and the format in the text box is the same/valid (otherwise it must be in the format as specified in NLS_DATE_FORMAT), it will insert no trouble in a DML process. http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/bldr.htm#CHDBHCBB

Similar Messages

Restful service unable to insert data using PL/SQL.

Hi all,
Am running: AL 2.01 standalone mode on OEL 4.8 in VM box A.
Oracle database 10.2.0.4 with Apex 4.2.0.00.27 on OEL4.8 in VM box B.
Able to performed oracle.example.hr Restful services with no problem.
Unable to insert data using AL 2.0.1 but works on AL 1.1.4.
which uses the following table (under schema: scott):
create table json_demo ( title varchar2(20), description varchar2(1000) );
grant all on json_demo to apex_public_user; and below procedure ( scott's schema ):
CREATE OR REPLACE
PROCEDURE post(
    p_url     IN VARCHAR2,
    p_message IN VARCHAR2,
    p_response OUT VARCHAR2)
IS
l_end_loop BOOLEAN := false;
l_http_req utl_http.req;
l_http_resp utl_http.resp;
l_buffer CLOB;
l_data       VARCHAR2(20000);
C_USER_AGENT CONSTANT VARCHAR2(4000) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)';
BEGIN
-- source: http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
utl_http.set_response_error_check(false);
-- Begin the post request
l_http_req := utl_http.begin_request (p_url, 'POST', utl_http.HTTP_VERSION_1_1);
-- Set the HTTP request headers
utl_http.set_header(l_http_req, 'User-Agent', C_USER_AGENT);
utl_http.set_header(l_http_req, 'content-type', 'application/json;charset=UTF-8');
utl_http.set_header(l_http_req, 'content-length', LENGTH(p_message));
-- Write the data to the body of the HTTP request
utl_http.write_text(l_http_req, p_message);
-- Process the request and get the response.
l_http_resp := utl_http.get_response (l_http_req);
dbms_output.put_line ('status code: ' || l_http_resp.status_code);
dbms_output.put_line ('reason phrase: ' || l_http_resp.reason_phrase);
LOOP
    EXIT
WHEN l_end_loop;
    BEGIN
      utl_http.read_line(l_http_resp, l_buffer, true);
      IF(l_buffer IS NOT NULL AND (LENGTH(l_buffer)>0)) THEN
        l_data    := l_data||l_buffer;
      END IF;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
      l_end_loop := true;
    END;
END LOOP;
dbms_output.put_line(l_data);
p_response:= l_data;
-- Look for client-side error and report it.
IF (l_http_resp.status_code >= 400) AND (l_http_resp.status_code <= 499) THEN
    dbms_output.put_line('Check the URL.');
    utl_http.end_response(l_http_resp);
    -- Look for server-side error and report it.
elsif (l_http_resp.status_code >= 500) AND (l_http_resp.status_code <= 599) THEN
    dbms_output.put_line('Check if the Web site is up.');
    utl_http.end_response(l_http_resp);
    RETURN;
END IF;
utl_http.end_response (l_http_resp);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line (sqlerrm);
raise;
END; and executing in sqldeveloper 3.2.20.09 when connecting directly to box B as scott:
SET serveroutput ON
DECLARE
l_url      VARCHAR2(200)   :='http://MY_IP:8585/apex/demo';
l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
l_response VARCHAR2(30000);
BEGIN
post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;which resulted in :
anonymous block completed
status code: 200
reason phrase: OK
with data inserted. Setup using 2.0.1
   Workspace : wsdemo
RESTful Service Module: demo/
          URI Template:      test
                Method: POST
           Source Type: PL/SQLand executing in sqldeveloper 3.2.20.09 when connecting directly to box B as scott:
SET serveroutput ON
DECLARE
l_url      VARCHAR2(200)   :='http://MY_IP:8585//apex/wsdemo/demo/test';
l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
l_response VARCHAR2(30000);
BEGIN
post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;which resulted in :
status code: 500
reason phrase: Internal Server Error
Listener's log:
Request Path passes syntax validation
Mapping request to database pool: PoolMap [_poolName=apex, _regex=null, _workspaceIdentifier=WSDEMO, _failed=false, _lastUpdate=1364313600000, _template=/wsdemo/, _type=BASE_PATH]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
demo/test matches: demo/test score: 0
Choosing: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as current candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
Tenant Principal already established, cannot dispatch
Chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST demo/test
demo/test is a public resource
Using generator: oracle.dbtools.rt.plsql.AnonymousBlockGenerator
Performing JDBC request as: SCOTT
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: Error occurred during execution of: [CALL, begin
insert into scott.json_demo values(/*in:title*/?,/*in:description*/?);
end;, [title, in, class oracle.dbtools.common.stmt.UnknownParameterType], [description, in, class oracle.dbtools.common.stmt.UnknownParameterType]]with values: [thetitle, thedescription]
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
java.sql.SQLException: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:205)
        at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1043)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
        at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
        at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4755)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
        at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
        at oracle.ucp.jdbc.proxy.CallableStatementProxyFactory.invoke(CallableStatementProxyFactory.java:101)
        at $Proxy46.execute(Unknown Source)
        at oracle.dbtools.common.jdbc.JDBCCallImpl.execute(JDBCCallImpl.java:44)
        at oracle.dbtools.rt.plsql.AnonymousBlockGenerator.generate(AnonymousBlockGenerator.java:176)
        at oracle.dbtools.rt.resource.templates.v2.ResourceTemplatesDispatcher$HttpResourceGenerator.response(ResourceTemplatesDispatcher.java:309)
        at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:88)
        at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:412)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:162)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
        at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:65)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
        at java.lang.Thread.run(Thread.java:662)
Error during evaluation of resource template: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-idPlease advise.
Regards
Zack

Zack.L wrote:
Hi Andy,
Sorry, forgot to post the Source that's use by both AL1.1.4 and AL2.0.1.
Source
begin
insert into scott.json_demo values(:title,:description);
end;
it's failing during the insert?
Yes, it failed during insert using AL2.0.1.
So the above statement produces the following error message:
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted delimited-idThis suggests to me that an unprintable character (notice how there is nothing between the double quotes - "") has worked its way into your PL/SQL Handler. Note how the error is reported to be a column 74 on line 2, yet line 2 of the above block should only have 58 characters, so at a pure guess somehow there's extra whitespace on line 2, that is confusing the PL/SQL compiler, I suggest re-typing the PL/SQL handler manually and seeing if that cures the problem.

Problem with Refreshing the data bound text fields

Folks,
First of all, this a GREAT product and I am moving my apps from Eclipse to Studio Creator. I am very impessed with it so far.
I am gone through most tutorials, but can't help resolve the problem that I am having. I have a page, that lists all the users in a table. When you click on any user, it opens up another page that lists the detail of the specific user you have clicked on. This a typical use in most web applications, right?
In the user detail page, I open it in "Read" only mode, by setting the "setReadOnly" to true for all text field components. Then users can edit it by clicking "Edit" button. Edit button just changes the "setReadOnly" to false, to allow editing. After editing, they can hit the "Save" button to save the changes. In the save button, I call this code:
public void prerender() {
        try {
            userID=getSessionBean1().getUserID();
            getSessionBean1().getWeb_userRowSetUserDetail().setObject(1,userID);
            getWeb_userDataProviderUserDetail().refresh();
            info("prerender: Refresh called");
        } catch (Exception ex) {
            error("Error in userForm.prerender():"+ex.getMessage()+ex.getStackTrace());
            log("Error in userForm.prerender():", ex);
        setReadWrite();
public String btnSave_action() {
        try {
            getWeb_userDataProviderUserDetail().commitChanges();
            getWeb_userDataProviderUserDetail().refresh();
            info("Data Provider Refreshed in SAVE");
            _readOnly=true;
            form1.discardSubmittedValues("saveVForm");
            info("User Updated New:"+userID);
        } catch (Exception ex) {
            log("Error Description", ex);
        return null;
    public String btnEdit_action() {
        try {
            _readOnly=false;
            //info("User ID Edt="+getSessionBean1().getUserID());
        } catch (Exception ex) {
            error("Error in userForm.btnEdit_action:"+ex.getMessage()+ex.getStackTrace());
            log("Error in userForm.btnEdit_action():", ex);
        return null;
    private void setReadWrite(){
        // Set read-only to true or false for all text fiels
        this.btnEdit.setVisible(_readOnly);
        this.btnSave.setVisible(!_readOnly);
        this.user_id.setReadOnly(_readOnly);
        this.user_email_client.setReadOnly(_readOnly);
        this.user_email_office.setReadOnly(_readOnly);
        this.user_fname.setReadOnly(_readOnly);
        this.user_lname.setReadOnly(_readOnly);
        this.user_id.setReadOnly(_readOnly);
        this.user_password.setReadOnly(_readOnly);
        this.user_password_conf.setReadOnly(_readOnly);
        this.user_phone_cell.setReadOnly(_readOnly);
        this.user_phone_cell_aac.setReadOnly(_readOnly);
        this.user_phone_client.setReadOnly(_readOnly);
        this.user_phone_home.setReadOnly(_readOnly);
        this.user_phone_office.setReadOnly(_readOnly);
    }When the save button is clicked, the database is updated (as I can verify by looking directly into the database), but the data-bound text fields do not display the new value. YES, I am calling refresh() on data provider? I tried to call refresh in both "preRender()" and "Save" button action event, but that did not help either.
Please note that the save button also changes the "setReadOnly" back to TRUE for all text fields. That means, users view the page in Read-Only mode after saving. (They have to click on "Edit" button again to edit it). I discovered that if I do not set the text field components in "ReadOnly" mode, then they display the updated value of the fields. But if I change setReadOnly to TRUE, then they display the old values (before the save).
Any idea what I am doing wrong here?
Thanks

Here is my experience with it. I have three text
boxes to be filled out. They are part of a virtual
form with an add button as the submit. You can fill
out the 3 and add them and a node is added to a tree
component. When you click on a node in the tree
component (the submit to another virtual form that
the 3 buttons participate in) the text fields should
be loaded with the values that they where added with.Hard to tell from this explanation, but if the text fields do not participate in a virtual form, then they are not going to get updated when an action in the virtual form happens. Not sure this is your problem. Like I say, hard to tell from this explanation.
They will not display the values though...having
nothing to do with read only. If I disable them
before hand...they display the updated values. If I
set their value at the top or bottom of prerender,
they display the change...if I set the value in an if
conditional that is hit (I have checked many times)
in prerender, they will not display the values. If I
set them in the tree handler anywhere, they will not
display the values. This is very frustrating and is
wasting tons of my time...I simply want to load the
text fields based on the tree node that was
clicked...I have messed with this for hours and it
certainly does not work.Well, setting them in the tree handler won't work because the tree handler gets called in the page instance that handles the submit and not the page instance that renders the response.
Posting your prerender code might help. Also, your action handler.
>
>
- Mark

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error by inserting data into a field of datatype LONG

Hi,
When inserting data into a field of datatype long in oracle8 database via SQL Plus or SQL worksheet there occurs the following error message: "field in data file exceeds the maximum length".
If I access to the database from a selve written program via odbc there is no problem when inserting the data by the same sql statement.
So what can I do?
Thanks in advance!
Juergen

What does your SQL statement look like?

BDC not inserting data in mandatory fields of MM01

Suddenly My BDC for sales maintenance View is not working as it is not inserting data in Mandatory fields.?can any one tell me the reason

Hi Satyanarayan,
1. Check ur code in debug to see if your internal table contains value in mandatory fields
2. Try executing BDC program online to figure out the problem....
3. Check ur code to see whether u r assigning values to this fields...
Let me know if these things are ok in ur code...
Enjoy SAP.

Access pre-insert data using ViewObjects

Hi,
I’m trying to access pre-insert data (before super.doCommit() execution) using viewobjects, but I only obtain committed data. Is it possible to obtain pre-insert data using viewobjects?
Here the Java code:
String amDef = "oracle.srdemo.model.AppModule";
String config = "AppModuleLocal";
ApplicationModule am =
Configuration.createRootApplicationModule(amDef, config);
ViewObject vo = am.findViewObject("DatetestView1");
System.out.println("Query will return "+ vo.getEstimatedRowCount()+" rows...");
vo.executeQuery();
while (vo.hasNext()) {
Row curPerson = vo.next();
System.out.println(vo.getCurrentRowIndex()+". "+
curPerson.getAttribute("Id")+" "+
curPerson.getAttribute("Dataini"));
Configuration.releaseRootApplicationModule(am, true);
I'm using JDeveloper 11g, a Fusion Web Application and ADF Business Components
Thanks in advance.

Hi Timo,
According to your instructions, I obtained current ApplicationModule and the issue was solved.
Here the Java Code to get ApplicationModule from Iterator:
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dciter = (DCIteratorBinding)bindings.get("DatetestView1Iterator");
DCDataControl dc = dciter.getDataControl();
ApplicationModule am = (ApplicationModule)dc.getDataProvider();
AppModuleImpl am2 = (AppModuleImpl)am;
ViewObject vo = (DatetestViewImpl)am2.findViewObject("DatetestView1");
Thank you vey much,
Olga

HTMLDB_TOOLS by Vikas (Post Tab Delimated Data using Text Area)

Hi
We want to upload tab delimated data using text area (user will paste data in text atrea instead of uploading csv file)
The data format will be
.-----Col_1-----Col_2-----Col_3
1-----10.78-----12.58-----11.92
2-----11.66-----12.77-----12.49
3-----10.83-----13.05-----12.92
4-----11.54-----13.27-----13.72
5-----11.45-----12.83-----12.89
6-----11.81-----11.29-----12.33
7-----12.60-----12.31-----12.72
8-----11.78-----12.44-----12.55
9-----11.97-----11.95-----12.49
10-----11.50-----12.28-----12.15
Where
----- indicates tabs
1. Col_1 ,Col_2,..... are column headings
2. Col_1 heading will be always blank as indicated
3. Default Data Type for all columns will be varchar2(10)
4. Number of Columns may vary upto *150*
Regards
Edited by: jazib on Jan 21, 2009 8:15 PM

thanx for the re Dalerich1, but no, unfortunately i have a
banking CRM-app which i have to simulate, and within that
simulation swf there has to be that functionality.
plus, since the app is still in development, it may change
within the next couple of weeks, so i'd have to be able to record
the functionality again with captivate (customer requirement) &
then efficiently & quickly make it work like in the real thing.
otherwise (if thmy customer wouldn't insist in using
captivate) i might have dropped captivate in favor of flash a long
time ago...
any other directions anybody? i can't believe this simple
task is costing me so much time and effort.
thanx
caveman

Insert Current Date into text Field

Hi I was wondering if anyone knows how to insert the current
date into a text field using ASP.NET C# page. When the page loads.
Or better still insert current date into my database when the
page is updated. using the insert Server behavier.
I would be very greatfull for any help.

To assign it to a text box you couls use the following in the
onload
function
textbox.Text = DateTime.Now.toString;
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"cantmakeitwork" <[email protected]> wrote
in message
news:e9qhrv$crd$[email protected]..
> Hi I was wondering if anyone knows how to insert the
current date into a
> text
> field using ASP.NET C# page. When the page loads.
>
> Or better still insert current date into my database
when the page is
> updated.
> using the insert Server behavier.
>
> I would be very greatfull for any help.
>

Using Text fields in SWT

Well, the people over on the Swing forum didn't like when I put this over there, and I can't find a dedicated SWT forum, so I hope I can get an answer over here...
In my GUI (developed using SWT), I have a Text field called date.
It appears in the window with this code
date = new Text(dialogShell, SWT.NONE);
date.setBounds(42, 49, 119, 14);
date.setEnabled(false);When the window is started, the appropiate date is set. date.setText("1/1/2000");However, when the application is run, it chokes on the setText field, throwing a NullPointerException. I can't figure out why it's throwing that exception, even with an explicitly set date. The code to set the Text appears to follow the code in a SWT book I use for reference. Am I missing some small detail? Why the NullPointerException, and what should be done to fix it?

Here's Eclipse's SWT "forum": http://www.eclipse.org/newsgroups/main.html

Adding current date to text field w/ Javascript in Acrobat 8

I am trying to add the current date to a text field using javascript in Acrobat 8 Professional. I am using the util.printd function in a javascript function but the date of creation shows in the text field, NOT today's date. Any clues??
var f = this.getField("myField");
if (!f.value) f.value = util.printd ("m/d/yyyy", new Date());

Thanks. I've used it also without the empty value check and had the same result of showing the creation date and not the current date.

Populate data in text field

Hi all,
I am a bit confused here. In my page I have three text boxes, they are - P10_YEAR, P10_MONTH, P10_TOTAL. I am using LOV for year and months field. LOV is like for year 2000;2000, 2001;2001 and for month June;June,July;July and so on. Month field is set to textbox with submit.
So I want to retrieve the data in the P10_TOTAL when user select the month. Interestingly it always return 0 but it should be more than that. I have set the Source for P10_TOTAL as PL/SQL Expression *0=( SELECT count(*) from rtv_metro_count where record_month=:P10_month);* but it does not work. However it does work in toad and sql query. I have tried to change the expression to SQL query but did not work either.
Is there any other way, I can do this task, retrieve data from table in a specific text field? Please provide your suggestions.
Thanks in advanced.
Tajuddin

Create a page process - on Submit using the following code:
DECLARE
v_count NUMBER;
BEGIN
SELECT COUNT (*)
INTO v_count
FROM rtv_metro_count
WHERE record_month = :p10_month;
:p10_total := v_count;
END;
and remove the pages source by setting it to static assignement - only when current value in session state is null.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Date in text field

Hi,
I have a text field :P1_DATE . I want to enter date into it and date can be in any format like 01102012 means 01/10/2012 .if i enter date like 01102012 this should be enter like a date in table as date column accept.when i edit to the record date should be display like 01102012.
Thanks & Regards
Vedant

Dear Friend,
i have created two region.1st region have some item .using these item i have created invoice header.after creaing invoice header i have added no of line w.r.t invoice header.
in 1st region i have take text item to enter invoice date it's data type is date type.
in 2nd region which has created using tabular form here is i ma using one column invoice date.
i want to display 1st region invoice date into tabular form invoice date column.so i have use item (application or page item) and pass :p1_invoice_date.
i have use :p1_invoice_date as a text field but data type is date type date format is 'DDMMYY' and i am try to display it into tabular form invoice date column. it's also date type but i have display it as a text field and os i have put :p1_invoice_date into Tabular Form Element item default type (application or page item) .
But it display me error
report error:
ORA-01790: expression must have same datatype as corresponding expressionHow to display 1st region invoice date into tabular form invoice date column.
How can i do this.
Thanks
Edited by: Vedant on Oct 25, 2012 3:16 AM

Need help displaying data in text field... Help?

i have this code:
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import com.adobe.serialization.json.JSON;
var loader:URLLoader = new URLLoader(new URLRequest("https://api.twitter.com/1/statuses/user_timeline.json?screen_name=ScottMitchell"));
loader.addEventListener(Event.COMPLETE, loadComplete);
function loadComplete(e:Event):void {
    processData(e.target.data);
function processData(data:String):void {
    var tweets:Array = JSON.decode(data) as Array;
    trace(tweets[0].text);
It works, in the output it tells me the tweets.
but i need it to be displyed on the app, i need to no how to do this, someone pointed me in the direction of using a item renderer extended from sprite?
But really all i need to do is display it in a text field, all i want to do is display the data.
Can anyone help???
I know this is probably simple and i did try to figure this out on my own, but had no luck.
All help is appreciated.
Many thanks in advance.

you can always use an array if there's no pattern to your positions:
var positionA:Array=[ [100,20], [2,222], [55,2], [201,111], [78,23] ];
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import com.adobe.serialization.json.JSON;
var loader:URLLoader = new URLLoader(new URLRequest("https://api.twitter.com/1/statuses/user_timeline.json?screen_name=ScottMitchell"));
loader.addEventListener(Event.COMPLETE, loadComplete);
function loadComplete(e:Event):void {
    processData(e.target.data);
function processData(data:String):void {
    var tweets:Array = JSON.decode(data) as Array;
for(var i:int=0;i<5;i++){
var tf:TextField=new TextField();
addChild(tf);
tf.multiline=true;
tf.width=300;
tf.text =   tweets[i].text;
tf.autoSize="left";
tf.x=positionA[i][0];
tf.y=positionA[i][1];
nextY+=tf.height;

How to retrieve the data in texts field for ME23N

hai all,
i need to do some coding for the item texts field for PO, which can be saw under ME23N. i need to retrieve the details in the text. but i have no idea how am i going to get the data from that field, which table is it under for PO?
please advice. thanks

Hi,
the texts will be stored in STXH table..u need to pass the four values TDOBJECT
TDNAME
TDID
TDSPRAS...U will get the text details
Or
use the FM 'READ_TEXT'.
cehck the below links
http://www.sap-basis-abap.com/sapac002.htm
FM READ_TEXT
reward if helpful.
Regards,
Nagaraj

Insert Date Using Text Field

Similar Messages

Maybe you are looking for