Insert .dll File Ocean Optics Jaz

Hi there,
I want to use the spam package (Ocean Optics) in Labview 2009. But I have no idea how to use the .dll file in Labview. I found already tools>>import>>shared library.
Insert the SPAM32.DLL file. But in the same menu you must also insert a header file. But where can I found this one? Or do I something wrong?
Could anyone help me with this?
Stephan
Solved!
Go to Solution.

Hello ra.graf1988,
I do not know what this Ocean Optics DLL is about, however I can help you using a DLL with LabVIEW!
The first thing is that when you want to call a DLL, you need to know some information about that DLL. Mainly, you need to know the calling convention, the thread safety and the functions prototypes (i.e. the names of the functions along with the input and output parameters data types). That information should be located somewhere on the documentation of the Ocean Optics package.
When you know that, you have two possibilities to use the DLL: either use the Import Wizard to create a library with wrapper VIs for all the functions of the DLL, or use a the "Call Library Function" node to access the function you need on the DLL.
If you want to go for the first option, then you need indeed a header file. This file is just a C file containing the prototypes of all the functions you want to import. If you do not have such a header file, you can create it yourself (from the documentaion of the DLL).
Here are some more information for the first method (with example of header file): https://decibel.ni.com/content/docs/DOC-9078
and for the second method: https://decibel.ni.com/content/docs/DOC-9069
Let me know if you need more information.
Cédric | NI Belgium

Similar Messages

Driver for JAZ Ocean Optics

Dear all,
I'm trying to find out whether there is a driver for the Ocean Optics "Jaz" Spectrometer to interface "Jaz" with the NI-cRIO.
I would like to use the Ethernet (TCP/IP) protocol but also the USB could be a solution.
Does anybody have anything on this?
Thank a lot
Fra_QS

Hi Fra_QS
Please have a look at the ocean optics page.
They have the OmniDriver that supports LabVIEW 7.1 and above:
"OmniDriver provides drivers for LabVIEW version 7.1 and above to enable you to configure Ocean Optics spectrometers as real-time virtual instruments in National Instruments' LabVIEW graphical programming environment."
Spectroscopy Development Platform
You can download this driver here:
OmniDriver
Or you can use the standard TCP/IP functions in LabVIEW, but then you have to know the device specific commands for the communication.
Hope that helps.
Kind regards
Pixar

Data acquisition time of ocean optics spectrometer

Hi, LVers,
I has a S2000 multichannel fiber optic spectroscopy system. It includes two channels, master and slave. Additionally there is a channel labeled as 'LS-1'. I use labview and driver OOILVD32.dll to control this spectroscopy. In OOILVD32.dll, I use vi 'OOI SCAN' to acquire spectral data through master channel.
In vi "OOI SCAN", I disable all slave channels (there are 7 slave channels) and enable master channel only. However, I find that the data acquisition time is always approximately two times of the "sampling frequency" we set. E.g. for sampling frequency of 75 ms (a small value), the spectral data acquisition time is approx. 160-170 ms; for a sample frequency of 4000 ms (a large value), the spectral data acquisition time is approx. 8300-8400 ms, so on and so forth.
I am very confused with this phenomenon. I guess the most probable reason is that both master and slave channels are always enabled even one of them is software disabled. Because this product is discontinued, I can not find the manual. Anybody could advise me how this such a spectrometer works internally? Is there any multiplexing acquisitions inside?
Thanks in advance.

Hi Hello183,
Unfortunately, I do not know how your specific device works, however, I did find the product page for this device on the Ocean Optics web site, which points to the USB4000-series Plug-and-Play Spectrometer for more details. There seems to be a operations manual for this device. Perhaps this can shine some light on how the sampling works for your device as well.
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

Report on a .DLL file

I need to run an inventory report on a specific .DLL file for all
workstations at my site. I need the date and version of this file. How
do I get ZEN inventory to grab and store this information to the
database? Or if it's already in the database how do I report on it?
ZENworks 6.5 SP2, workstations running ZFDAgent 6.5 SP2.
Thanks.

Depends on your setup.
But use the following instructions as a basic guide
1. Open "Inventory Service_SERVERNAME" Object
2. Tab "Software Inventory Configuration - Software Configuration"
3. File Software-Mapping -> Edit Table
4. Insert -> Add the appropiate details to identifiy the version.
4.1 You need to know the filename and exact size kb for the min and max
size fields
4.2 You need to know what version matches each file size, thats how its
identified
4.3 Insert new entries based on filename and file size for each version
of the dll.
Hope this helps.
DragonKF
DragonKF

Dll files required for developing BAPI application!

Hi,
Can anybody send me the following dll files which are required for developing BAPI application.
librfc32.dll (at least 46D, build 263)
jRFC11.dll (JDK 1.1)
jRFC12.dll (JDK 1.2 and 1.3)
Regards,
Bala Raja

Hi Deepak,
Can you tell me which JAR files you added to resolve build time errors.
I am facing the following errors after importing Std masthead from portal7.3.
Can not find the tag library descriptor for "prt:taglib:tlframework"
Can not find the tag library descriptor for "prt:taglib:tlhtmlb"
componentRequest cannot be resolved
ILocalesListService cannot be resolved
ILocalesListService cannot be resolved to a type
noBtn cannot be resolved
Syntax error on token "}", delete this token
Syntax error, insert "}" to complete Statement
The import com.sap.portal.core cannot be resolved
The method enableCloseAll() is undefined for the type NavigationEventsHelperService
The method getDynamic(String, null) is undefined for the type IUMParameters
The method getDynamic(String, String) is undefined for the type IUMParameters
yesBtn cannot be resolved
Please give your mail Id if possible.
Regards,
Sumangala

I'm missing a DLL file in Leopard

Hi, im trying to install the IE 8 beta on my new leopard system and it says im missing the DLL file CSSEQCHK.DLL what do i do?

Hi blackhawkjr,
You would have to be running Windows in order to run Internet Explorer 8 beta using BootCamp.
"CSSEQCHK.DLL " File is a Windows based file and cannot be read by the Mac OS.
About Boot Camp
With Boot Camp you can install and run Windows XP or Windows Vista on your Intel-based Mac computer, using a Microsoft Windows installation disc that you provide.
Boot Camp Assistant (located in the Utilities folder in the Applications folder) helps you set up a Windows partition on your computer's hard disk and then start the installation of your Windows software. To complete the Boot Camp installation, you install Boot Camp drivers to enable Windows on your Mac.
After installing Windows and the Boot Camp drivers, you can start up your Mac in either Windows or Mac OS X.
Home Index
Installing Windows XP or Windows Vista on your Mac
You can install Windows XP or Windows Vista on your Mac using Boot Camp Assistant, located in the Utilities folder in the Applications folder.
NOTE: If you have already installed Boot Camp on your Mac and want to upgrade Windows, you don’t need to reinstall Boot Camp.
To install and set up Windows on your Mac, you’ll need an Intel-based Mac computer with:
A USB keyboard and mouse, or a built-in keyboard and trackpad
Mac OS X version 10.5 or later (the latest version of Mac OS X is strongly recommended)
The latest firmware updates installed
At least 10 GB of free space on the disk you’re installing on
A built-in optical disc drive, or, if you have a MacBook Air, a compatible external optical drive connected directly to your computer
A licensed copy of Windows XP Home Edition or Professional, or Windows Vista Home Basic, Home Premium, Business, or Ultimate
IMPORTANT: You must use a single full-install Windows installation disc. To install Windows XP, you must have Service Pack 2 or later. Do not install Windows XP without Service Pack 2 and attempt to upgrade it later. Use only 32-bit versions of Windows. If you have a Mac Pro or a MacBook Pro introduced in early 2008 or later, you can use a 64-bit version of Windows Vista.
To install Windows on your Mac:
Back up the important information on your computer.
Open Boot Camp Assistant (located in the Utilities folder in the Applications folder).
Print and follow the instructions in the “Boot Camp Installation & Setup Guide.”
To install Windows using Boot Camp, you must be logged in as an administrator of your computer.
*DO NOT proceed with any installations* until you have read all the material and feel confident in doing so. http://www.apple.com/macosx/features/bootcamp.html
Carolyn
Message was edited by: Carolyn Samit

Dependency list in project shows 2 DLL files. What do I need to do when creating a stand-alone executable file to ensure that it is included?

When the executable that I created is run on a stand-alone machine, a search is instantly launched to locate the missing *.DLL files along with about 20 other sub vi files from an example vi file that I downloaded last week. Once the exampe vi was open, I modified the block diagram and the front panel and then I resaved it with a new name.
The missing sub-vi files are the same files that I saw listed in the Dependencies list of the project along with the 2 DLL files. This problem shouldn't be happening because I included the top level vi file that contains the sub-vi files into the source files list under the Start-Up VIs window of the application properties. What needs to be done to make this stand-alone executabale complete?
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com

OK...So it's not a simple as clicking the mountian icon above and inserting the location of the picture file on my PC huh? It works on my end just fine, but I understand you all don't see it.
I really don't understand why this is such a complicated process in this discussion forum, but your explanation isn't working for me. SO, I'm going to write what I understand to be the proper procedure and you tell me if it's wrong.
Attach my image using the Browse button below. That makes sense. Done that.
Edit my post - Edit it? How is typing this message in the window any different from editing my post??? Are you sugesting that I Edit As HTML(http://forums.ni.com/ni/board/post?board.id=170&message.reply_to_id=244152#) using the shortcut in the lower right hand side of the frame??? I not, please explain a different way.
I right clicked the adress in the window under the Attachment heading below the lower left hand side of the frame, copied it and pasted it into the Script Prompt: dialog pop-up that appeared when I clicked on the mountain icon in the tools menu. By the way,
Now I see my image in the post just before I sent it.
Don't you see it now?
As for the DLL file - the ONLY way I can find the DLL file that I need is to refresh the dependencies list in my project. As I explained in my previous posts, those two DLL files came with an example vi that i downloaded from the NI website last week and they must have been embedded inside of the example because I didn't create them myself and I've since resaed the original example vi as one that's been renamed by myself. In doing so, I presume that the DLL file was inherited from the original example vi file to my own vi file. However, that's clearly not the case because every time I run the executable file that I created with the renamed example vi file in my project, it immediately launches a searchfor the DLL files that it claims are missing!!! SInce the DLL files are ONLY visible in the dependencies list, I can't transfer them to the Dynamic VI and Support files window in the Application Builder. SO, I drag them up the Source Files tree in the Application Builder to the top of the tree where the Start-up vi is located and then I can move them to the Dynamic VI and Support Files window. Those DLL files don't appaer inthe top level of the tree where the Start-up vi appears before I move it to the Start-up vi window of the Application Builder. I'll try it again.
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com
Attachments:
FTM1-BlkDgrm.jpg ‏780 KB

How can we make a .DLL file..???

Hi,
can any one tell me how can we make a .dll file..
can we insert any font file (.ttf), image, icons in in the dll file to call them progrmatically in forms 6i...and use them onu where
like i am currently using d2kwut60.dll file to call mouse cursors that loaded into it..
I would appreciate any response to this issue..??
regards,

Ok,
Let me take this example.
Supposing A vendor with 3 AP open items, B vendor with 2 AP open items.
When making a payment proposal, SAP shows only 2 lines, namely, collected by vendor code.
Looking at DME file, however, it shows 5 lines which means all individual open items.
What we want to make is 2 lines in DME file, which means grouping invoices by vendor in a DME file.
Hope it makse sense.

How i can add jar or dll file to VM lib by code or installer

iam working at project to interact with rs232 port using comm api
to work program corectly i must insert some files(jar,dll,broperty files)
to the VM by copy and past ...
the problem is how i can do it by installer?
iam will be very thanks if i get help

Reader has to be installed on the user's machine and most folks have already installed a PDF reader. You do not supply the code, but provide a link to Reader at the Adobe site so folks can get it if needed. There are many sites that provide such. If you distribute the code yourself, you have to follow certain rules and get permission. I am not sure, but I do not think there is any issue with providing the link, though you may have to have permission to use the Adobe logo with the link.

Why Do I Need to Upload dll Files for Lightroom 5

I had a problem with the beta version of Lightroom 5 and was told to upload to dll files (msvcr80 and msvcr100), It worked fine after that. However, today I downloaded Lightroom 5, after deleting the beta version, and it did not work. I went back and added the two dll files and it works fine. Does anyone have an idea why the program does not come with these file or why I am having to do this. It must be a common but not universal problem. Just curious.
Doug

My understanding (which could well be wrong!) is that those two DLLs are in fact a standard part of the Operating Sytem, i.e. they appear in the Windows libraries. Lightroom (along with potentially other applications) makes use of these and so requires them to be working correctly. It looks first in its own installed libraries for them, and if not there it looks in the WIndows libraries. All well and good normally, however there was a recent spate of those "0Xc00007b" failures which were caused by some other application (iLivid seemed to be the main culprit) corrupting those two DLLs. The "Fix" from Adobe was simply to provide fresh copies of the two corrupt DLLs, which you then inserted into Lightroom 4's specific installation library. So now that you have Lightroom 5 installed, it too needs those DLLs dropped into its own specific installation library.
Note that you'll possibly need to keep doing it every time you install a dot release update.....or go and fix those DLLs in the Windows libraries. Obviously Adobe doesn't see it as their job to fix Operating System problems, so they've just provided a workaround for now.

Content Server 6.40 Presents a Save As dialog for ContentServer.dll file

hi All
we have installed successfully the content server 6.40 on a windows 2008 with iis 7 environment. The installation wen successfully with no errors. however when we run a test by calling the URL http://<server>:<port>/ContentServer/ContentServer.dll?serverInfo URL, instead of getting a response, we are getting a save as file dialog to save the dll file. Also, after the installation, even with the install website tick checked, the website was not installed. we had to do the installation of the website manually for the port.
With content server 620 on windows 2000 this was never the case
if anywone has an idea on how to resolve the issue, please advice
Regards
Ronny

GOT the Solution
to anyone else who could be going through the same issue, see if the solution below solves your issue
The website should get created if all the roles in IIS 7.0 are installed. Therefore, please try to install the IIS 7.0 by selecting
all the roles followed by installation of the SAP Content Server. By doing so, websites should be created automatically.
In the IIS 7.0, all the roles are not selected during the installation by default. Please make sure all the below roles are included and IIS 7.0 is installed, as per the installation manual for the Content Server on Windows 2008:
Roles needed in IIS 7.0.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled which is done by
default.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
I hope it helps someone!

Playing inserted avi files in Adobe Acrobat 9 or later

A user has inserted avi files into Adobe and it always worked up to version 8.1.
Any version later than that, the avi files will not play anymore.
Is there any way to make them play or will all his files need converted to another source?
Converting them all to a different format would be quite the task as there are many videos involved.
Thanks, Jeff

You can't edit Excel files in Adobe Acrobat.

Problem registering CremePie.dll file

Hi All,
I am working with signature capture in standard MAM. I am trying to run the standard signature capture functionality in PDA. I have deployed mamsignapplet.cab and
signaturecapture.cab files in side WEB-INF\signature folder.
In SAP Note 897289, I read that we need to register the some dll files in PDA, so that the browser will supports the applets in it.
Also in the same document it was mentioned like
For CrEme versions 3.25, 3.26 and 3.27a there is an acknowledged by NSICOM
bug as plug-in registration link contains wrong dll path for those
versions. Copy/Paste both "Register/Unregister Plug-In" files from
\Windows\CrEme\Demos to your desktop with the help of ActiveSync, open both
dlls and change the existing line with the following
\windows\regsvrce.exe \windows\creme\bin\CremePie.dll.
I have copied Register Plugin/Unregister Plugin files to my desktop and tried to edit them. But they saved as shorcut and I could not edit them. I have checked the properties of that file. There file type is Shortcut and target is \windows\regsvrce.exe CremePie.dll.
Can any body please tell me how to edit this file or can we create this file.
Regards
Murthy

Hi,
for that I use the software "total commander" from http://www.ghisler.com/ running directly on the PDA. This gives me the ability to edit the file on the PDA.
Please see if REGSVRCE.EXE is available in your windows directory. Some verndors do not deliver that file, cause it is not supported as standard CE file. If this is the case, download the .NET SDK for CE. This installs the file on the PC in the WINCE500 directory - you can download it from there to the device then.
I hope this helps to solve the issue!
Regards,
Oliver

Why after referenced dll files to my project they are not on my release directory when i build the project ?

This is a screenshot of my visual studio csharp the References and properties part of the dll's:
You can see on the right the 3 problem files are the directx dll files.
When my brother is running the program he get exception say one or more of the dll files is not found.
I sent him the 3 dll files he tried to put them from where he was running the program he also tried to put them at the directory they are in my place: C:\Temp\radarscan\dlls\DLL'S\Microsoft.DirectX.DLL
He created this directory and put them there but it didn't help.
I was sure once i referenced the dll files they are in my program no need to have them. And at least to have them in the directory where you running the program from but it's not working.
What i want is that my brother and anyone else that will run the program will not need the dll files on his pc and if he does need them so to have them in the directory where you are running the program from will be enough. How can i solve it ?

Still not working. Tried Samir solution but same problem my brother on his computer getting exception:
This is the code the line where the exception happen 142:
private void ScanClouds_Load(object sender, EventArgs e)
Boolean bl = InitializeDirectX();
if (bl == false)
MessageBox.Show("Error initializing directX!");
Application.Exit();
And in the method init:
private Boolean InitializeDirectX()
DispMode = Manager.Adapters[Manager.Adapters.Default.Adapter].CurrentDisplayMode;
D3Dpp = new PresentParameters();
D3Dpp.BackBufferFormat = DispMode.Format;
D3Dpp.PresentFlag = PresentFlag.LockableBackBuffer;
D3Dpp.SwapEffect = SwapEffect.Discard;
D3Dpp.PresentationInterval = PresentInterval.One; //wait for vertical sync. Synchronizes the painting with
//monitor refresh rate for smoooth animation
D3Dpp.Windowed = true; //the application has borders
try
D3Ddev = new Device(Manager.Adapters.Default.Adapter, DeviceType.Hardware, pictureBox1.Handle,
CreateFlags.SoftwareVertexProcessing, D3Dpp);
D3Ddev.VertexFormat = CustomVertex.PositionColored.Format;
D3Ddev.RenderState.Lighting = false;
D3Ddev.RenderState.CullMode = Cull.CounterClockwise;
//load imagesBmp to panelTexture
//panelTexture = Texture.FromBitmap(D3Ddev, imagesBmp, Usage.Dynamic, Pool.Default)
backTexture = TextureLoader.FromStream(D3Ddev, mymem);
//scannerTexture = TextureLoader.FromFile(D3Ddev, @"D:\Buttons\Radar\radar.png");
scannedCloudsTexture = new Texture(D3Ddev, 512, 512, 1, Usage.Dynamic, Format.A8R8G8B8, Pool.Default);
//sprite is used to draw the texture
D3Dsprite = new Sprite(D3Ddev);
return true;
catch
return false;
The 3 dll files are: Microsoft.DirectX.Direct3D.DLL, Microsoft.DirectX.Direct3DX.DLL, Microsoft.DirectX.DLL
The question is why he is getting this exception ? Realy it dosent see/find the dll files ? Or maybe his machine not supporting this directx files ? Strange.
Another thing when i put my mouse on the hard disk on the dll files i see a baloon tip say the:
File description: Microsoft Managed Direct3D Debug
Maybe the problem is that the dll files of the directx belong to the debug directory but i make my program to be build in the release directory ?
In any case i can't find any solution yet. This is the exception message:
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.DirectX.Direct3DX.dll' or one of its dependencies. The specified module could not be found.
File name: 'Microsoft.DirectX.Direct3DX.dll'
at mws.ScanningClouds.InitializeDirectX()
at mws.ScanningClouds.ScanClouds_Load(Object sender, EventArgs e) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ScanningClouds.cs:line 142
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

How to call function in included dll file through java application.

Hi All,
i am trying to create an java application which call c# functions using JNI. i am completed with the code and it is running fine when i tried to run from netbeans IDE. But when i tried from Calculator.jar file, first time it throws this error:
F:\JavaProjects\Calculator\dist>Java -jar Calculator.jar
Exception in thread "main" java.lang.UnsatisfiedLinkError: no CSharpClient in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at calculator.CalculatorApp.<clinit>(CalculatorApp.java:20)
After that i included that dll file in the cuurent directory. And compiled and tried to run, it throws an unexpected error:
F:\JavaProjects\Calculator\dist>Java -jar Calculator.jar
*# An unexpected error has been detected by Java Runtime Environment:*
*# Internal Error (0xe0434f4d), pid=2640, tid=3700*
*# Java VM: Java HotSpot(TM) Client VM (1.6.0_02-b06 mixed mode, sharing)*
*# Problematic frame:*
*# C [kernel32.dll+0x12a5b]*
*# An error report file with more information is saved as hs_err_pid2640.log*
*# If you would like to submit a bug report, please visit:*
*# http://java.sun.com/webapps/bugreport/crash.jsp*
Anyone have idea how to solve this error.
Thanks in advance.

This error is created whenever things go sour on the native side. The first thing you can try, and I assume you are using a Java<->C++<->C# bridge which includes two dlls, one created by C++ and another by C#. Is to make sure that the C# dll is compiled using /t:module switch during compilation.
If you are using VS2008, or VS2005, you can add a post build syntax like:
csc /t:module /out:"$(ProjectDir)$(OutDir)YourModule.dll" "$(ProjectDir)YourCSfile.cs"
Hope this helps! If not, ensure first that the native code works by creating a native test app for it.

Insert .dll File Ocean Optics Jaz

Similar Messages

Maybe you are looking for