Problem registering CremePie.dll file

Hi All,
I am working with signature capture in standard MAM. I am trying to run the standard signature capture functionality in PDA. I have deployed mamsignapplet.cab and
signaturecapture.cab files in side WEB-INF\signature folder.
In SAP Note 897289, I read that we need to register the some dll files in PDA, so that the browser will supports the applets in it.
Also in the same document it was mentioned like
For CrEme versions 3.25, 3.26 and 3.27a there is an acknowledged by NSICOM
bug as plug-in registration link contains wrong dll path for those
versions. Copy/Paste both "Register/Unregister Plug-In" files from
\Windows\CrEme\Demos to your desktop with the help of ActiveSync, open both
dlls and change the existing line with the following
\windows\regsvrce.exe \windows\creme\bin\CremePie.dll.
I have copied Register Plugin/Unregister Plugin files to my desktop and tried to edit them. But they saved as shorcut and I could not edit them. I have checked the properties of that file. There file type is Shortcut and target is \windows\regsvrce.exe CremePie.dll.
Can any body please tell me how to edit this file or can we create this file.
Regards
Murthy

Hi,
for that I use the software "total commander" from http://www.ghisler.com/ running directly on the PDA. This gives me the ability to edit the file on the PDA.
Please see if REGSVRCE.EXE is available in your windows directory. Some verndors do not deliver that file, cause it is not supported as standard CE file. If this is the case, download the .NET SDK for CE. This installs the file on the PC in the WINCE500 directory - you can download it from there to the device then.
I hope this helps to solve the issue!
Regards,
Oliver

Similar Messages

Problems registering craxdrt.dll

Hi Everybody,
I am trying to get an application that makes use of Crystal Reports to build but have run into problems due to dlls not being registered on my build machine. The error message I get is:
"The type or namespace name 'CRAXDRT' could not be found (are you missing a using directive or an assembly reference?)".
This is due to a reference we have to craxdrt.dll (which is not registered on the build machine) in our application. The problem is that when I try to register the craxdrt.dll file with regsvr32 I get the following error:
"The module "craxdrt.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found."
I've had a look at craxdrt.dll with dependency walker, which lists the following dlls as missing:
API-MS-WIN-APPMODEL-RUNTIME-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ERROR-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-STRING-L1-1-0.DLL
API-MS-WIN-SHCORE-SCALING-L1-1-1.DLL
CSLIBU-2-1.DLL
DCOMP.DLL
GPSVC.DLL
IESHIMS.DLL
MFC71U.DLL
I'm not sure if these are a red herring though as they appear to be Windows system DLLs for the most part, which I would not expect to have to redistribute with my application.
Any help would be greatly appreciated as its starting to feel like banging my head against a brick wall trying to get this to work and getting nowhere.
Thanks a lot for any help you are able to give!

Hi Max,
Moved your post to the Legacy SDK forum.
Need more info, what version of CR are you using?
And since the RDC is only supported in Visual Studio 6 I assume this is what you are using?
Current version of the RDC packages up to CR XI R2 ( version 11.5 ) have redist packages available so don't try to deploy the runtime manually yourself, use the MSM or MSI.
MSI should have all of the dependencies include, MSM will be missing ALL of the dependencies so you need to include them yourself.
Don

Error 1904.module failed to register \importent.dll files HRESULT -10737407

Hi,
I'm trying to install BOE on the E drive, but i'm getting this error "error 1904.module failed to register C:
Program Files(X86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791".
1.My question is eventhough i'm installin on E, by default i think its trying to load some folders/files on C drive. Is this error because of some permission/rights on C drive??
2. What does this error mean?? Can we ignore this error- will it have some problems in future??
Could someone please help me on this....
Thanks,
Rajini
Edited by: Rajini V on Nov 30, 2009 8:22 AM

Thanks Seb.
I have the administrator rights.
I have now cleaned up all the instances and registry entries for the same and started a fresh installation on E drive.
But the 'Importent6.dll' file is not getting registered.
I'm getting the error :
u201Cerror 1904.module failed to register E:
Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791u201D
Why do we get this error?? How can I overcome this??
Regards,
Rajini

Problem while compiling 'dll' files in Form Server..Urgent

Hi!
I'm trying to compile the library(dll) in form server and getting a message that "can not open that file".At the same time able to compile 'fmb' files which is in the same directory.
Could you please help me?
Thank you,
Denish

I am also working on Forte. Forte has an inbuilt Tomcat. You dont need to copy any files to any where in the file mount system. You need to specify the External / Internal Browser settings, So that when you try to execute it, the .jsp file can be displayed in the browser. I havent faced any problem as you said.
Uma
http://www.javagalaxy.com

Problem in Packet.dll file calling with JNI

I called wpcap.dll and packet.dll using JNI & while using native method of packet.dll, I am getting the error:
The Procedure entry point PacketGetReadEvent could not be loaded in the dynamic link library packet.dll.
Please help.
Thanks in advance.

what are you using for that ?
JCOB or ezjcom ?I am developing Packet Capture Program in Java, for
network monitoring. For that, I am using these
dynamic link library.Thanks for information but how I would know ?

How to convert java class to dll file for using in Microsoft Technology(.n)

hey hemmj !!!!!!
nice replying , first of all i d like to say thanks for response me so frequently..... i like such type of guy... i d never forget ur online support.
hey buddy, i ve a problem with applet application...
i m working on java chat server build on swing applet. As it is chat server, it is divided into two parts, one is server application and other is client application. I want to run this server app on the client server and the basic thing with this site is that it is running on .net platform(Microsoft). and the other app ll running on the client machine or end user. Now the problem is that this site would run only if the server app ll be run on server. This server app ll open the socket of server, which ll listen the request of the user...... So, the requirement is to convert this java sever class file into dll file and register this dll file with the IIS server.So, It run and stop with the IIS server.
I ve already search the way to convert the java class file into dll file. This is possible in such way........... below code is for the java class file...
import java.net.*;
import java.io.*;
import java.util.*;
public class chatServer
public static void main(String args[]) throws Exception
ServerSocket sersoc=new ServerSocket(1234);// Any port number above 1000 should do
// as most ports below 1000 are used by system
Vector socvec=new Vector();
String data="";int i,j=0;
BufferedReader in;
//System.out.println("Listening of port " + sersoc.getLocalPort());
//System.out.println("Waiting for connections...");
while(true)
Socket soc=sersoc.accept();
socvec.addElement(soc);
chatServerReadThread csrt=new chatServerReadThread(socvec, soc);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
PrintStream out=new PrintStream(soc.getOutputStream());
out.println("Connected to chat server");
out.flush();
data= in.readLine();
for(i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
out=new PrintStream(soc.getOutputStream());
out.println(data + " connected");
out.flush();
//System.out.println(data + " connected");
csrt.start(); // error is comming from here..... plz help me.
class chatServerReadThread extends Thread
Vector socvec;
PrintStream out;
chatServerReadThread(Vector socvec, Socket soc)
this.socvec=socvec;
try
out=new PrintStream(soc.getOutputStream());
}catch(Exception e){}
public void run()
try
String data;
Socket soc;
BufferedReader in;
while(true)
for(int i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
if(in.ready())
try
data=in.readLine();
if(data.charAt(0) == ']')
data = in.readLine() + " exited";
//System.out.println(data);
socvec.removeElement(soc);
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
else
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
}catch(Exception e){socvec.removeElement(soc);}
}catch(Exception e){e.printStackTrace();}
first i ve made the jar file of this class
jar cvf chatServer.jar chatServer.classafter getting the jar chatServer.jar. I ve opened the .net dos prompt and
type this command which ll make dll file automatically....
> jbimp /t:library chatServer.jar
And you'll see the following output:
Microsoft (R) Java-language bytecode to MSIL converter version 1.1.4322.0
for Microsoft (R) .NET Framework version 1.1.4322
Copyright (C) Microsoft Corp 2000-2002. All rights reserved.
Created chatServer.dll
I cant get the problem origin from where it is comming, when i tried to convert it into .dll file it shown an error that, it did not recongnized the method in first class
public static void chatServerReadThread.start() method
is not recognized by .net dos prompt commnad. But when i omit this method it gets created the .dll file. This start method is basically the default method of thread class that run the thread from the same class..
By vewing the code u can visulize the thing,, i ve marked the code from where the error is comming.
Plz do it as soon as possible, i ll waiting for ur reply......
I ll be really thanking u for that....
Thanx and regards
Niraj Kumar Singh

I wonder if this will work:
jbimp /t:exe chatServer.jar
Your chatServer is an application that can be started from the commandline.
A dll is a library to be used in com, com+, other executables or ....

"I/O Error when Saving Document"; "PreflightLib.dll file missing or corrupt"

These error messages are received when trying to Save the document. The document has Typewriter entries and added/replaced pages. I have done this action almost every day for the past year without any problems. Now it occurs on 2 different computers. I have cleaned my registry and searched to see if I deleted or moved the ".dll" file - no luck. What to do? Work depends on the Acrobat program. Please Help.

Hi dhults,
Please follow these steps to manually re-register PreflightLib.dll file through command prompt:
Click the Start button.
Type "command" in the search box... DO NOT hit ENTER yet!
While holding CTRL-Shift on your keyboard, hit ENTER.
You will be prompted with a permission dialog box.
Click Yes.
Type the following command: regsvr32 /u PreflightLib.dll.
Hit ENTER. This will UN-REGISTER your file.
Type the following command: regsvr32 /i PreflightLib.dll.
Hit ENTER. This will RE-REGISTER your file.
Close the command prompt window.
Re-start the program associated with PreflightLib.dll error.
If still an error occurs, then you may need to repair Acrobat. For that, go to Help menu and click 'Repair Acrobat Installation'.
I hope this will help you.
Regards,
Anubha

How to fix corrupt dll files

Hi,
Happy New Year!
May it bring all of us, Good Health, Happiness, Harmony & Prosperity!
I will like to let you know that a few month back, I bought this S10-2 directly from Leveno, USA, but regrettably with in a a few days, I realized that this machine has the following problems:
1) The "dll files" are corrupt, details are as follows:
advpack.dll
dnsapi.dll
gdi32.dll
msv1_0.dll
2) Power Options: Control Panel / Power Options / Advance (Power buttons) has 3 options (default)
a) When I close the lid of my portable computer : Stand by
Kindly note that when I do this my system enters the stand by mode but after an hour or two even when the lid is close position, it wakes up again which I feel is a mall function and need a fix.
I will also like you to know that as of date I have repeatedly restored the machine to Factory Settings with a hope to fix the above problems but in vain as such I thought of approaching this august forum not only to educate myself as to how the files got corrupt but also to find a permanent fix, if possible?
Since I am out of USA where warranty facility can't be availed, hence I do look forward to hearing from a guru, who can bail me out!
Thanking you in anticipation and may God bless you!
Warm regards,
Anwar

Hi and welcome to lenovo forum...
wish you a happy new year ...
That could help BIOS 22 for S10-2 why ?
1ACN22WW 1.Fixed abnormal resume from standby mode issue.
Installing the package in Windows.
======================
1. Locate the file 1ACN22WW.exe that has been downloaded.
2. Double click the 1ACN22WW.exe icon.
3. Click install
4. Click flash bios
5. Press Enter to start flashing. During the process, you are advised not to turn off the computer.
6. When the update finishes, the computer will automatically reboot for the changes to take effect.
prefer to update BIOS ...after that procedure ...recover to factory again...that should fix that prob...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

How to handle a problem of Interop.SAPbouiCOM.dll file in SAP b1 9.0 PL11

Hi all,
I have a problem in creating addon of SAP b1 9.0,
At start time when I build my project but it does not create a file of Interop.SAPbouiCOM.dll except that it creates the file of SAPbouiCOM.dll in Bin folder of project. And as I thing, that missing of Interop.SAPbouiCOM.dll file is causing my addon to be not registered in SAP b1 9.0 PL11.
How can I solve that problem? I edited system form (Employee master data in VS2010(VB.NET)) that form runs correctly in SAP b1 at run time, the problem is missing file of Interop.SAPbouiCOM.dll which will be associated with project1.exe in Bin folder. even if I create another new project, it can not create that file,
What is the problem?
please anyone can help me.

Hi Edy,
Thank you so much, so how can I add reference of SAPbouiCOM in my project? Because I have added those 2 references DI and UI API version 9.0 but they give errors in each line contains SAPbouiCOM..... in menu.vb.
if it's possible can you try to explain me step by step as you explained to this link http://scn.sap.com/thread/3440046
Your help is highly appreciated Edy.

ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll and failure to install

I downloaded and extracted the latest ESR file (Version 10.0.7) this morning. Running SETUP.EXE with no command line switches fails to install Firefox. Ths installation log indicates that the installation has taken 1 second to complete execution. In the Installation log I see the following:
DLL Registration
** ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll **
In the C:\Program Files (x86)\Mozilla Firefox folder there is an uninstall folder as well as an install.log file. No other files or folders exist. Mozilla Firefox does appear in the Programs and Features but shows an icon associated with an unknown application.
I am logged in with a low-rights account but running the SETUP.EXE executable from an elevated command prompt. This should be sufficient to elevate the DLL registration.
Running on Windows 7 SP1 with all applicable updates. I've noticed several other people that have experienced this issue but nobody has a solution.
Thanks in advance for any help!

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How to register dll file

Hi
how i can use JNIregistry Project at:
www.trustice.com
to check registry for my dll and register if it isn't
i uesd JACOB project for this dll
please i need help as i don't know a lot about registry
thanks alot

The program can't start because ftd2xx.dll is missing from your computer. Try reinstalling the program to fix this problem.
Newly installed program on fairly new Windows 7 laptop. First time running it and we are missing .dll files. The google is full of very malicious looking websites offering dll files.
Not sure where to go on this one except bothering the vendor. I've seen Microsoft articles with no helpful information as well.
This topic first appeared in the Spiceworks Community

DLL Registration ** ERROR Registering: C:\Program Files\Mozilla Firefox\AccessibleMarshal.dll

Mozilla Firefox Installation Started: 2012-02-02 0:11:25
Installation Details
Install Dir: C:\Program Files\Mozilla Firefox
Locale : en-US
App Version: 10.0
GRE Version: 10.0
OS Name : Windows 7 or above
Target CPU : x86
Removing Previous Installation
Installing Main Files
DLL Registration
** ERROR Registering: C:\Program Files\Mozilla Firefox\AccessibleMarshal.dll **

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Unable to register the SAP JAVA CONNECTOR sapjco3.dll file

HI
I'm trying to intergrate BO and BW using SAP BO Integration kit, and following the manual at http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f&overridelayout=true
But first i must install the SAP Java Connector, I have downloaded them from https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000719346&.
My server is a WMvare win 2008.service pack 2.
My problem is that i'm unable to register the sapjco3.dll file.
I'm runnning the comand regsvr32 "C:windowssyswow64sapjco3.dll
but I only get the error message "The module "sapjco3.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "sapjco3.dll" is a valid DLL or OCX file ant try again"
I hav tried both the 64 bit and the 32 bit version of the dll. same error.
the dll version is 7110.34.16.7531
Any ideas
Thanks
På

Hi Pal,
you need to use the Java Connector v 2.1.8 and there is no need to register the DLL.
ingo

Register a DLL? or some other problem?

I have an app written in C# that I have copied out to several 32 bit machines. It works fine. We just started rolling out some 64 bit machines. I installed sql developer on that machine and we struggled a bit, but finally got it working fine. Then, I installed my app. When it runs, and tries to connect to Oracle, the error is "Type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception.
I am wondering if I need to register a dll? If so, I don't know which one? We have tried updating everything we could find. All machines have .NET 4.5 running. I think I need to hook Oracle to Windows?
Any thoughts would be appreciated.
Thanks,
Dave

It'd be helpful to know what the exception being thrown is (would be the InnerException of the one you're catching), but it's most likely a problem with the bit-ness of the application. If the compiler is set to AnyCPU (and it is by default), on the 64 bit machine you'll need a 64 bit version of the Oracle client. If you set it to x86, then you'll need a 32 bit Oracle client on all the machines (including the 64 bit ones).
Just registering a DLL won't be enough to solve this unless you're using the managed client beta, in which case you could do that or add the necessary entries into the app config file (and not have to register anything).

Just started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?

Just last 2 days started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing when booting up my PC with Windows 7. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?
I now see the message from tt2 and will try that. Thanks!

Read this:
MSVCR80.dll missing, cannot install iTunes

Problem registering CremePie.dll file

Similar Messages

Maybe you are looking for