Insert float value into ms sql server

Hi.
How do I insert a float value into my ms sql db.
The Code:
select.setFloat( 4, theForm.getVaerdi() );ERROR:
"MakeClapetInsertAction.java": Error #: 300 : method setFloat(int, java.lang.Float) not found in interface java.sql.PreparedStatement at line 89, column 12

setFloat takes a float primitive, not a Float object.
select.setFloat( 4, theForm.getVaerdi().floatValue() );

Similar Messages

  • How to insert chinese data into MS SQL Server 2000 through JDBC

    I am trying to insert chinese data into MS SQL server 2000 using JDBC. how to do this?
    can anybody help me.
    thanx.

    I am trying to insert chinese data into MS SQL server 2000 using JDBC. how to do this?
    can anybody help me.
    thanx.

  • INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

    Hi All,
    I have to insert the data into a SQL SERVER 2005 Database table.
    I am able to insert the data into a normal SQL Server table.
    When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
    Had anybody tried this??
    There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
    Thanks
    V Kumar

    Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
    I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
    I had followed that note, but still it is not working for me.
    But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
    Thanks
    V Kumar

  • Convert the insert statement of an MS SQL server into an oracle statement

    Hi ,
    The insert statement in the ms sql server is
    INSERT INTO #temp EXEC Procedurename @Id OUTPUT
    where table temp
    CREATE TABLE #temp(
              Id varchar(10),
              FNa varchar(40),
              LNa varchar(40),
              SId varchar(20),
              Aid varchar(20),
              Did varchar(20),
              CCNa varchar(255),
              CCId int,
              ISu char(1),
              IA char(1),
              Dir char(1),
              Ema varchar(60),
              St char(2),
              DId char(3)
    I converted the insert statement like this
    Procedurename(Id);
    LOOP
    FETCH cv_1 INTO v_temp;
    EXIT WHEN cv_1%NOTFOUND;
    INSERT INTO TEMP VALUES v_temp;
    END LOOP;
    CLOSE cv_1;
    But i am receiving PL/SQL: ORA-00947: not enough values
    Can anyone help on this?
    Thanks

    1) Are you sure that you even need a temp table? Fetching all the rows from a cursor 1-by-1 and then inserting them into a temp table (I'm assuming the Oracle table TEMP is declared as a global temporary table) would seem rather unusual and most likely pointless. In Oracle, readers don't block writers, so there is generally no need to use temp tables to hold intermediate results.
    2) If you do need to store a set of results into a table, it's going to be more efficient to do this in a single SQL statement rather than using a cursor. Something like
    INSERT INTO my_table ( <<list of columns>> )
      SELECT <<list of columns>>
        FROM <<other tables>>
       WHERE <<some conditions>>The SELECT part of the statement here is likely whatever SQL you use in declaring the cursor.
    Justin

  • Problem inserting date into MS SQL Server

    I am trying insert date into MS SQL Server database. First I used Statement and when I insert the date only date used to be inserted properly and the time used to be always 12:00:00 AM. I tried PreparedStatement and when I insert I get an error message:
    SQL Error: [Microsoft][ODBC SQL Server Driver]Optional feature not implemented
    I have attached the code.
    GregorianCalendar cal = new GregorianCalendar();
    java.util.Date dtm = (java.util.Date)cal.getTime();
    SimpleDateFormat formatOb = new SimpleDateFormat("dd/MM/yy hh:mm:ss");
    String date= (String)formatOb.format(dtm);
    dateCreated = new java.sql.Date(formatOb.parse(date).getTime());
    PreparedStatement psmt = con.prepareStatement("INSERT INTO Resume (ResumeName, Summary, Skills, OtherInformation, Interests, Memberships, Languages, Category, DateCreated, SupervisorName) VALUES(?,?,?,?,?,?,?,?,?,?)");
    psmt.setString(1, name);
    psmt.setString(2, summary);
    psmt.setString(3, skills);
    psmt.setString(4, info);
    psmt.setString(5, interest);
    psmt.setString(6, member);
    psmt.setString(7, language);
    psmt.setString(8, category);
    psmt.setDate(9, dateCreated);
    psmt.setString(10, loginName);
    psmt.executeUpdate();
    Any suggestions will be really helpful.

    Thanks,
    I changed the field in the database of DateCreated to timestamp, but when I insert the some binary data is inserted into the database. something like 0000000000000017D.
    I installed jtds-0.8.1 driver from source forge. but when try to connect to the database I get an error as:
    Connection refused: connect
    Error: Connection refused: connect
    I have attached the code for setting the driver and url also.
    private String driver = "net.sourceforge.jtds.jdbc.Driver";
    private String url = "jdbc:jtds:sqlserver://TEKKATTE:1433/placement;TDS=7.0";

  • Error while inserting into MS-SQL Server from Oracle using HS

    Hi,
    I am using hetrogeneous connection.
    I want to insert into MS-SQL Server Table by selecting from Oracle Tables.
    insert into tableone@mssql select * from table2;
    Table2 is in oracle database.
    while executing i'm getting
    ORA-02025: all tables in the SQL statement must be at the remote database
    Please guide me.
    Regards
    Salih KM

    some guy come up a solution by himself before. go ahead and try it
    ORA-02025 error while insert into emp@custard select ....

  • Inserting a Value into otherTable using an App. Proc. from a Date Picker

    I'm trying to call an Application Process that will insert an Attribute of a Row, into another table, after selecting a date from a Date Picker cell.
    I don't know why this shouldn't be possible. I think I've got all of my "Ducks in a Row", so to speak,
    but the Value that is being inserted into the other table is this:.. [object HTMLTableCellElement]
    (Ultimately, I'd like my Application Process to include Page element values with the insert as well, but I'm trying to handle one problem at a time)
    Here's a list of all the steps I've covered:
    1. I've Created an Application Process, (popDevices). The Process Point is "On-Demand". The Type is "PL/SQL Anonymous Block".
    The Process is defined as such:
    BEGIN
    Insert into P_DEVICES
    NAME,
    IP_ADDRESS,
    MODEL
    ) values
    'Unassigned',
    'Unassigned',
    :P153_MODEL
    COMMIT;
    END;
    2. I've Included the Javascript in the Page HTML Header.
    The Javascript is written as such: (minus the tags)
    function popDevices(PART_NO)
    var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=popDevices',0);
    get.add('P153_MODEL',PART_NO);
    gReturn = get.get();
    get = null;
    3. I've included the following in the "Element Attributes" field of the Date-Picker Item (Date_Delivered).
    The Region Type is "SQL Query (Updatable Report)"
    onChange="javascript:popDevices(PART_NO);"
    THE RESULTS
    A. A row does get inserted into the other (P_Devices) table,
    But the value of the Attribute from the Page Region is not valid.
    The Inserted value is this: [object HTMLTableCellElement]
    B. I have tried Every conceivable combination of characters in the "Element Attributes" field, such as:
    ...(PART_NO), (#PART_NO#), (||PART_NO||), (+PART_NO+)
    C. The Javascript in the Page HTML Header appears to be correct, since I have written it this same way for other applications without any problems.
    D. If this simply cannot be done by referencing the "onChange" Javascript from the "Element Attributes" field,
    Then can you help me to write the code into the Select statement of the region.
    Thanks for any help you can give me.
    -Gary

    This may not be the most direct approach to the solution. But, none the less, it is a solution.
    For those other novices, like myself, I hope this can be useful at some point in your development:
    MY DESIRED RESULT:
    A. To Insert into another tablle values derived from both; Page Item (i.e. P153_x) and Attributes of a Row in an Updatable Report from which I have selected the Date-Picker.
    B. I want the insert to occur automatically after the user Selects the date from the Date-Picker.
    SOLUTIONS:
    1. I usea Javascript prompt window to prompt for information and store the information in Pre-Created Page Items.
    This is the Javascript as I've entered it into the Page HTML Header region: (Minus the Tags)
    function received_javaprompt () {
    var Serial_Number = prompt("Enter the Serial Number");
    var Bldg_Id = prompt("Enter the Bldg_Id");
    var Clst_Id = prompt("Enter the Clst_Id");
    $x('P153_SERIAL_NO').value = Serial_Number;
    $x('P153_BLDG_ID').value = Bldg_Id;
    $x('P153_CLST_ID').value = Clst_Id;
    2. I needed to identify the (Manufacturer and Part_No) Column Attribute in the Row from which I selected the Date-Picker.
    A. To do this, I enumerated the Columns in the order they were listed in the Select Statement of the region (Click on the Region Definition Tab).
    B. Then (Click on the Report Attributes Tab). Count, In the numerical order which these columns are selected, ONLY the columns that are Editable.
    C. When I counted down as far as the Column I wanted to capture the value of, Then I made a mental note of that number and used it in the following (2) Javascripts (findMaker and findModel).
    3. findMaker (Minus the tags)
    function findMaker (pThis) {
    var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
    var Maker = html_GetElement('f15_'+vRow).value
    $x('P153_MAKER').value = Maker;
    4. findModel (Minus the tags)
    function findModel (pThis) {
    var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
    var Model = html_GetElement('f16_'+vRow).value
    $x('P153_MODEL').value = Model;
    5. I added one more Javascript, to the Page HTML Header, that references the Application Process which will Insert the values into the "Other" table:
    function popDevices(P153_SERIAL_NO,P153_BLDG_ID,P153_CLST_ID,P153_MAKER,P153_MODEL)
    var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=popDevices',0);
    get.add('P153_SERIAL_NO',P153_SERIAL_NO);
    get.add('P153_BLDG_ID',P153_BLDG_ID);
    get.add('P153_CLST_ID',P153_CLST_ID);
    get.add('P153_MAKER',P153_MAKER);
    get.add('P153_MODEL',P153_MODEL);
    gReturn = get.get();
    get = null;
    6. I added the "onChange" process to the Element Attributes field of the Table item which utilizes the Date-Picker:
    A. Click on the Report Attributes Tab of the Region.
    B. Click on the Edit icon of the column which utilized the Date-Picker
    C. I added this "onChange" reference to the Element Attributes field, which is found in the Tabular Form section.
    onChange="javascript:received_javaprompt();findModel(this);findMaker(this);popDevices((P153_SERIAL_NO).value,(P153_BLDG_ID).value,(P153_CLST_ID).value,(P153_MAKER).value,(P153_MODEL).value);"
    7. The Application Process which inserts the collected data into the table is as follows:
    (Name= popDevices: Process Point= On-Demand: Type= PL/SQL Anonymous Block)
    BEGIN
    Insert into P_DEVICES
    BLDG_ID,
    CLST_ID,
    NAME,
    IP_ADDRESS,
    SERIAL_NO,
    MAKER,
    MODEL
    ) values
    :P153_BLDG_ID,
    :P153_CLST_ID,
    'Unassigned',
    'Unassigned',
    :P153_SERIAL_NO,
    :P153_MAKER,
    :P153_MODEL
    COMMIT;
    END;
    Well, I hope this may help someone else like me.
    I usually arrive at my solutions by getting help here on the Discussion Forum and also Google. Google inevitably points me to a previous Apex Discussion Forum session.
    Edited by: garyNboston on Mar 15, 2010 10:55 AM

  • Insert data from oracle  to sql server

    we have running R12.1.1 .
    our company wants to deploy some CRM Application with sql server database. Continuously we have to insert data ( some fields from some tables of Order Management module ) from ORACLE -----------> SQL Server
    My Questions are :
    1. What are possible methods to insert data from ORACLE -----------------> SQL Server ?
    2. What are pros and cons of each method ?
    3. What is performance over load of each method ?
    PLease share your valuable knowledge / ideas / suggestions
    thanks

    What is a maximal latency for data changed in Oracle come into MS SQL?
    this data will be updated in CRM after 24 hours.Does it mean that data replicated from Oracle will be updated in MS SQL and should be replicated back?
    i want to know more details about these APIs etc and middle layer.what API? In MS SQL you can use Linked server and write SQLs that select from Oracle tables via that linked server and insert/update/delete into MS SQL. You can organize these SQLs into T-SQL procedures and run them in jobs.
    Also you can use MS SQL replication, snapshot or transactional, which is ugly because it places triggers on Oracle tables. I doubt that this will be approved by app vendor.
    Also you can use Oracle Streams via Transparent Gateway for MS SQL, which will be quite heavy solution.
    Also, if real-time replication is needed, you can use "middle layer" Oracle Golden Gate, which may be quite pricy for 30 tables.
    Also, if real-time replication is needed, you can use 3-rd party middle layer like DataCurrents or others.

  • Cannot enter correct values in the SQL server express 2012 using labview

    Hi everyone,
    I am trying to enter the 2D array I get from DAQ into the SQL server express 2012 using Labview. When I am run the software, it connects with the table but doesn't enter the correct values. It only enters the "0" for each column of the table. I have attached the VI as well as the screenshot from the database server. 
    I am also writing the same 2D array data into the text file and I get the correct readins there. 
    Is there something I am doing wrong here. 
    Attachments:
    test.png ‏251 KB
    test3.vi ‏96 KB

    If you had read the QL manuals or reference books, you would be aware SQL Server doesn't do multidimensional arrays.
    I prefer BLOBs or VARCHAR(MAXCHAR) as an alternative. I enter the values in formatted string values delimiter separated.
    But how to deal with multidimensional arrays. Well up to 3-5 you can use simple value for each "dimension". So the lowest dimension
    would be comma delimit. The next set of values and each succeeding set for each 2nd dimension values would have the "set" of values separated
    by a ":" or semicolon. For the third I use the ":" or colon to separate each 2D block of the 3rd dimension. This can all be easily reparsed
    with a multidimensional parser for the application. Should be simple to build. (e.g.. Use string arrays to parse the higher dimensions
    and numeric array for the lowest dimension). The VARCHAR(MAXCHAR) has an upper data bound of 2GB! If you have to save more
    than 3 dimensions for most all applications, you don't understand how best to analyze the test data and may want to give it more 
    thought to optimize the operation as well as the design, so it doesn't get too complex. By the way I use Data Clusters built in the
    data order and type as for SQL Server Data Table. This makes the design of the SQL Server interface easy as pie .

  • How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

    I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
    I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
    If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
    Put the Data Flow Task within the Foreach Loop Container
    Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
    I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
    I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
    And that's when I run into trouble...
    Exception from HRESULT: 0xC02020E8
    Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
    Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
    I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
    I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
    Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
    to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
    Thanks for your review and am hoping and praying for a reply and solution.

    Hi ITBobbyP,
    If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
    If in this scenario, please refer to the following tips:
    The Foreach Loop container should be configured as shown below:
    Enumerator: Foreach ADO.NET Schema Rowset Enumerator
    Connection String: The OLE DB Connection String for the excel file.
    Schema: Tables.
    In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
    The connection string for Excel Connection Manager is the original one, we needn’t make any change.
    Change Table Name or View name to the variable Sheet_Name.
    If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
    http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to insert column values into database as rows

    Hi,
    I have 8 columns and some not null columns. Based on not null columns I want to insert into table as rows. The 8 columns may contain values or no value. If the first column contains data, then I have to insert into one row. if the second column contains data I have to insert a row and in second column. respectively...So How can I insert column values into rows. Can I write 8 insert statements. (OR) is it possible to insert data from columns using where clause.
    Please help me out....
    Thanks in Advance

    Lines Table:
    line_id, orcl_bank_account_num, product_type, service_type, lease_type,
    funding_type, cpi, billing_frequency_unit_cd , annual_due_date ,
    pricing_start_date, pricing_end_date, install_date, contract_end_date ,
    prdct_replacement_cost_amt, cradle_replacement_amt, supranet_contract,
    issuance_fee, board_inactive_date, header_id, creation_date, last_modified_date,
    created_by_nam, modified_by_nam, activeinactive_flg, prdct_bill_amt_yr1,
    prdct_bill_amt_yr2, prdct_bill_amt_yr3, prdct_bill_amt_yr4, prdct_bill_amt_yr5,
    prdct_bill_amt_yr6, prdct_bill_amt_yr7, prdct_bill_amt_yr8, activation_fee_yr1,
    activation_fee_yr2, activation_fee_yr3, activation_fee_yr4, activation_fee_yr5,
    activation_fee_yr6, activation_fee_yr7, activation_fee_yr8,
    In this table the columns structure is :
    -- PRDCT_BILL_AMT_YR (1 to 8) NUMBER(14,4)
    -- ACTIVATION_FEE_YR (1 to 8) NUMBER(8,2)
    I have one more table:
    PRDCT_INS_AMT               NUMBER(14,4)
    ACTIVATION_FEE_AMT          NUMBER(14,4)
    I want to insert prdct_bill_amt_yr (1 to 8) columns data into PRDCT_INS_AMT column. similarly activation_fee (1 to 8) columns data.
    But the data should be inserted based product_type, service_type, lease_type columns values. (These 3 columns may contain upto 45 combinations).

  • Data Pump .xlsx into a SQL Server Table and the whole 32-Bit, 64-Bit discussion

    First of all...I have a headache!
    Found LOTS of Google hits when trying to data pump a .xlsx File into a SQL Server Table. And the whole discussion of the Microsoft ACE 64-Bit Driver or the Microsoft Jet 32-Bit Driver.
    Specifically receiving this error...
    An OLE DB record is available.  Source: "Microsoft Office Access Database Engine"  Hresult: 0x80004005  Description: "External table is not in the expected format.".
    Error: 0xC020801C at Data Flow Task to Load Alere Coaching Enrolled, Excel Source [56]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager"
    failed with error code 0xC0202009.
    Strangely enough, if I simply data pump ONE .xlsx File into a SQL Server Table utilizing my SSIS Package, it seems to work fine. If instead I am trying to be pro-active and allowing for multiple .xlsx Files by using a Foreach Loop Container and a variable
    @[User::FileName], it's erroring out...but not really because it is indeed storing the rows onto the SQL Server Table. I did check all my Delay
    Why does this have to be sooooooo difficult???
    Can anyone help me out here in trying to set-up a SSIS Package in a rather constrictive environment to pump a .xlsx File into a SQL Server Table? What in God's name am I doing wrong? Or is all this a misnomer? But if it's working how do I disable the error
    so that is stops erroring out?

    Hi ITBobbyP,
    According to your description, when you import data of .xlsx file to SQL Server database, you got the error message.
    The error can be caused by the following reasons:
    The excel file is locked by other processes. Please kindly resave this file and name it to other file name to see if the issue will be fixed.
    The ACE(Access Database Engine) is not up to date as Vaibhav mentioned. Please download the latest ACE and install it from the link:
    https://www.microsoft.com/en-us/download/details.aspx?id=13255.
    The version of OFFICE and server bitness is not the same. To solve the problem, please refer to the following document:
    http://hrvoje.piasevoli.com/2010/09/01/importing-data-from-64-bit-excel-in-ssis/
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Insert and update tables from SQL server to oracle database tables

    Hi,
    I am having problem while update data from sql server to oracle database tables.
    I am doing one way insert +updates that is from SQL Server tables ==> Oracle database tables
    I am using tools Sql server Integration service. I can insert data from sql server to oracle but update can't. Please help me how can I update + insert from sql server to oracle database tables easily.
    Thanks in advance.

    Hi,
    What about using Oracle SQL Developer for migration
    http://www.oracle.com/technetwork/database/migration/sqlserver-095136.html
    HTH

  • Connecting to datasource and retrieve, insert and update data in SQL Server

    hi,
    i am trying to retrieve, insert and update data from SQL Server 2000 and display in JSPDynPage and is for Portal Application. I have already created datasource in visual composer. Is there any sample codes for mi to use it as reference???
    Thanks
    Regards,
    shixuan

    Hi,
    See this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
    Regards,
    Senthil kumar K.

  • How to insert data from access to sql server ?

    How to insert data from access to sql server ?
    Please help me
    thanks

    phamtrungkien wrote:
    How to insert data from access to sql server by JAVA?The first four words of my last post:
    masijade wrote:
    JDBC with two connectionsGet a resultset from the jdbc-odbc bridge access connection, cycle through it and add batch insert commands to the jdbc connection to sql server. Give it a try and if the code has an error, then post your code ans ask a question.
    The real question, though, is why you think it absolutely necessary to use Java for this.

Maybe you are looking for