Insert multiple rows from cursor to table

Hi,
I want to insert multiple rows retrieved from cursor to a table without looping the cursor till the end of cursor.
I have the following structure, plz guide me.
Create procedure procedure_name as
cursor mycursor as
select * from table1; --returns multiple row
t_data table1%rowtype;
begin
fetch mycursor to t_data;
loop
exit when cursor not found;
insert to table2
end loop;
end procedure;
===========================
Now my cursor contains multiple records. I can iterate the records in loop and insert data to another table e.g table2 with same structure.
But I want to insert the total data at a time without looping the cursor for each data.Please suggest how to do this ?
Thanks in advance.

You should be able to do it in a single statement (assuming table1 and table2 have the same columns/datatypes)
insert into table2 (select * from table1);

Similar Messages

Insert multiple rows into a same table from a single record

Hi All,
I need to insert multiple rows into a same table from a single record. Here is what I am trying to do and I need your expertise. I am using Oracle 11g
DataFile
1,"1001,2001,3001,4001"
2,"1002,2002,3002,4002"
The data needs to be loaded as
Field1      Field2
1               1001
1               2001
1               3001
1               4001
2               1002
2               2002
2               3002
2               4002
Thanks

You could use SQL*Loader to load the data into a staging table with a varray column, then use a SQL insert statement to distribute it to the destination table, as demonstrated below.
SCOTT@orcl> host type test.dat
1,"1001,2001,3001,4001"
2,"1002,2002,3002,4002"
SCOTT@orcl> host type test.ctl
load data
infile test.dat
into table staging
fields terminated by ','
( field1
, numbers varray enclosed by '"' and '"' (x))
SCOTT@orcl> create table staging
2    (field1 number,
3     numbers sys.odcinumberlist)
4 /
Table created.
SCOTT@orcl> host sqlldr scott/tiger control=test.ctl log=test.log
SQL*Loader: Release 11.2.0.1.0 - Production on Wed Dec 18 21:48:09 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Commit point reached - logical record count 2
SCOTT@orcl> column numbers format a60
SCOTT@orcl> select * from staging
2 /
    FIELD1 NUMBERS
         1 ODCINUMBERLIST(1001, 2001, 3001, 4001)
         2 ODCINUMBERLIST(1002, 2002, 3002, 4002)
2 rows selected.
SCOTT@orcl> create table destination
2    (field1 number,
3     field2 number)
4 /
Table created.
SCOTT@orcl> insert into destination
2 select s.field1, t.column_value
3 from   staging s, table (s.numbers) t
4 /
8 rows created.
SCOTT@orcl> select * from destination
2 /
    FIELD1     FIELD2
         1       1001
         1       2001
         1       3001
         1       4001
         2       1002
         2       2002
         2       3002
         2       4002
8 rows selected.

How do I insert multiple rows from a single form ...

How do I insert multiple rows from a single form?
This form is organised by a table. (just as in an excel format)
I have 20 items on a form each row item has five field
+++++++++++ FORM AREA+++++++++++++++++++++++++++++++++++++++++++++++++++++
+Product| qty In | Qty Out | Balance | Date +
+------------------------------------------------------------------------+
+Item1 | textbox1 | textbox2 | textbox3 | date +
+ |value = $qty_in1|value= &qty_out1|value=$balance1|value=$date1 +
+------------------------------------------------------------------------+
+Item 2 | textbox1 | textbox2 | textbox4 | date +
+ |value = $qty_in2|value= $qty_out1|value=$balance2|value=$date2 +
+------------------------------------------------------------------------+
+ Item3 | textbox1 | textbox2 | textbox3 | date +
+------------------------------------------------------------------------+
+ contd | | | +
+------------------------------------------------------------------------+
+ item20| | | | +
+------------------------------------------------------------------------+
+ + + SUBMIT + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database Structure
+++++++++++++++++
+ Stock_tabe +
+---------------+
+ refid +
+---------------+
+ item +
+---------------+
+ Qty In +
+---------------+
+ Qty Out +
+---------------+
+ Balance +
+---------------+
+ Date +
+++++++++++++++++
Let's say for example user have to the use the form to enter all 10 items or few like 5 on their stock form into 4 different textbox field each lines of your form, however these items go into a "Stock_table" under Single insert transaction query when submit button is pressed.
Please anyone help me out, on how to get this concept started.

Hello,
I have a way to do this, but it would take some hand coding on your part. If you feel comfortable hand writing php code and doing manual database calls, specificaly database INSERT calls you should be fine.
Create a custom form using the ADDT Custom Form Wizard that has all the rows and fields you need. This may take a bit if you are adding the ability for up to 20 rows, as per your diagram of the form area. The nice thing about using ADDT to create the form is that you can setup the form validation at the same time. Leave the last step in the Custom Form Wizard blank. You can add a custom database call here, but I would leave it blank.
Next, under ADDT's Forms Server Behaviors, select Custom Trigger. At the Basic tab, you enter your custom php code that will be executed. Here you are going to want to put your code that will check if a value has been entered in the form and then do a database INSERT operation on the Stock_table with that row. The advanced tab lets you set the order of operations and the name of the Custom Trigger. By default, it is set to AFTER. This means that the Custom Trigger will get executed AFTER the form data is processed by the Custom Form Transaction.
I usually just enter TEST into the "Basic" tab of the Custom Trigger. Then set my order of operations in the "Advanced" tab and close the Custom Trigger. Then I go to the code view for that page in Dreamweaver and find the Custom Trigger function and edit the code manually. It's much easier this way because the Custom Trigger wizard does not show you formatting on the code, and you don't have to keep opening the Wizard to edit and test your code.
Your going to have to have the Custom Trigger fuction do a test on the submitted form data. If data is present, then INSERT into database. Here's a basic example of what you need to do:
In your code view, the Custom Trigger will look something like this:
function Trigger_Custom(&$tNG) {
if($tNG->getColumnValue("Item_1")) {
$item1 = $tNG->getColumnValue("Item_1");
$textbox1_1 = $tNG->getColumnValue("Textbox_1");
$textbox1_2 = $tNG->getColumnValue("Textbox_2");
$textbox1_3 = $tNG->getColumnValue("Textbox_3");
$date1 = $tNG->getColumnValue("Textbox_3");
$queryAdd = "INSERT INTO Stock_table
(item, Qty_In, Qty_Out, Balance, Date) VALUES($item1, $textbox1_1, $textbox1_2, $textbox1_3, $date1)"
$result = mysql_query($queryAdd) or die(mysql_error());
This code checks to see if the form input field named Item_1 is set. If so, then get the rest of the values for the first item and insert them into the database. You would need to do this for each row in your form. So the if you let the customer add 20 rows, you would need to check 20 times to see if the data is there or write the code so that it stops once it encounters an empty Item field. To exit a Custom Trigger, you can return NULL; and it will jump out of the function. You can also throw custom error message out of triggers, but this post is already way to long to get into that.
$tNG->getColumnValue("Item_1") is used to retrieve the value that was set by the form input field named Item_1. This field is named by the Custom Form Wizard when you create your form. You can see what all the input filed names are by looking in the code view for something like:
// Add columns
$customTransaction->addColumn("Item_1", "STRING_TYPE", "POST", "Item_1");
There will be one for each field you created with the Custom Form Wizard.
Unfortunately, I don't have an easy way to do what you need. Maybe there is a way, but since none of the experts have responded, I thought I would point you in a direction. You should read all you can about Custom Triggers in the ADDT documentation/help pdf to give you more detailed information about how Custom Triggers work.
Hope this helps.
Shane

Extract Multiple Rows from a Single Table into a Single Row in a New Table

I have a table in a database that contains contact data like name, address, phone number, etc.
The folks who designed the database and wrote the application wrote it so that all contact records are placed in that table, regardless of contact type. In fact, the contacts table does not even have a column for "type" even though there are many
different types of contacts present in that table.
I am trying to write a mail merge style report in SRSS, that gets sent to a specific type of contact, based on criteria provided that must be obtained from another table, and that data is then used to get back to a specific set of contacts from the contacts
table.
The attached file directly below describes my problem and all related information in an extremely detailed way.
SRSSMailMergeIssue.pdf
Unless there is a way to make a SRSS Tablix point to two different data sets in SRSS, it looks like I have to combine multiple rows from the same table into a new table.
If anyone can review the details in the attached pdf file and possibly point me in the direction I need to run to solve this probelm, I would greatly appreciate it.
I also included a document (below) that shows the tables I reference in the probelm description.
dbtables.pdf

I found a solution.... and posted it below
select
dk.ucm_docketnumber [UCM DocketNumber],
dk.ucm_docketid [UCM DocketID],
vc.FirstName [Victim FirstName],
vc.MiddleName [Victim MiddleName],
vc.LastName [Victim LastName],
vc.Suffix [Victim Suffix],
vc.Address1_Line1 [Victim AddressLine1],
vc.Address1_Line2 [Victim AddressLine2],
vc.Address1_Line3 [Victim AddressLine3],
vc.Address1_City [Victim City],
vc.Address1_StateOrProvince [Victim StateProvince],
vc.Address1_PostalCode [Victim Postalcode],
oc.FirstName [Offender FirstName],
oc.MiddleName [Offender MiddleName],
oc.LastName [Offender LastName],
oc.Suffix [Offender Suffix],
oc.Address1_Line1 [Offender AddressLine1],
oc.Address1_Line2 [Offender AddressLine2],
oc.Address1_Line3 [Offender AddressLine3],
oc.Address1_City [Offender City],
oc.Address1_StateOrProvince [Offender StateProvince],
oc.Address1_PostalCode [Offender Postalcode],
pc.FirstName [Arresting Officer FirstName],
pc.MiddleName [Arresting Officer MiddleName],
pc.LastName [Arresting Officer LastName],
pc.Address1_Line1 [Arresting Officer AddressLine1],
pc.Address1_Line2 [Arresting Officer AddressLine2],
pc.Address1_Line3 [Arresting Officer AddressLine3],
pc.Address1_City [Arresting Officer City],
pc.Address1_StateOrProvince [Arresting Officer StateProvince],
pc.Address1_PostalCode [Arresting Officer Postalcode]
FROM ucm_docket dk
left outer join ucm_victim v on dk.ucm_docketid = v.ucm_docketnumber
left outer join contact vc on vc.contactid = v.ucm_victimlookup
left outer join ucm_offender o on o.ucm_offenderid = dk.ucm_offenderlookup
left outer join contact oc on oc.contactid = o.ucm_individualid
left outer join contact pc on pc.contactid = dk.ucm_ArrestingOfficerLookup
WHERE (dk.ucm_docketnumber = @DocketNUM)

Abap logic not fetching multiple rows from master data table

Hi
I just noticed that my logic is fetching only 1 row from master data table.
ProdHier table
PRODHIERACHY            Level
1000                                  1
1000011000                      2
10000110003333              3
10000110004444              3
'10000110005555              3*
logic only fetches one row of level 3, I would like to fetch all level 3 rows.
DATA: ITAB type table of /BI0/PPROD_HIER,
      wa like line of ITAB.
Select * from /BI0/PPROD_HIER INTO wa where /BIC/ZPRODHTAS = 3.
IF wa-PROD_HIER(10) = SOURCE_FIELDS-PRODH2.
     RESULT = wa-PROD_HIER.
     ELSEIF wa-PROD_HIER(5) = SOURCE_FIELDS-PRODH1.
     RESULT = wa-PROD_HIER.
ENDIF.
ENDSELECT.
thanks

Hi,,
I have implemented the logic in end routine and it still reads only the first row.
I am loading only PRODH1 and PROD2 but now I want to get all values of PRODH3 from the master data table.
The first 5 values are PRODH1 and first 10 values belongs to PRODH2.
Whenever PRODH2 = 1000011000 in source I should get the following values
10000110001110
10000110001120
10000110001130
I have multiple rows of 1000011000 so my result should be
1000011000               10000110001110
1000011000               10000110001120
1000011000               10000110001130
DATA: ITAB type table of /BI0/PPROD_HIER,
wa like line of ITAB.
data rp type _ty_s_TG_1.
Select * from /BI0/PPROD_HIER INTO table itab where /BIC/ZPRODHTAS = 3.
LOOP AT RESULT_PACKAGE INTO rp.
read table itab into wa with key PROD_HIER(5) = rp-PRODH1.
IF sy-subrc EQ 0.
     rp-PRODH3 = wa-PROD_HIER.
     ELSE.
read table itab into wa with key PROD_HIER(10) = rp-PRODH2.
IF sy-subrc EQ 0.
     rp-PRODH3 = wa-PROD_HIER.
ENDIF.
ENDIF.
MODIFY RESULT_PACKAGE FROM rp.
ENDLOOP.
Edited by: Bhat Vaidya on Sep 10, 2010 11:27 AM
Edited by: Bhat Vaidya on Sep 10, 2010 11:37 AM

Insert multiple rows using Cursors.

I am trying to insert rows into a table based on information from another table.
For example:
When Table 1: Num_Rows = 100 my proc will insert 100 rows into Table 2 with relevent data.
Do I need to use a Cursor and iterate through Num_Rows doing an INSERT each time? Is there a better way to do it other than using Cursors?
Rob.

It is not about using cursors or not using cursors. All SQLs wind up as cursors in the Oracle Shared Pool. So there is no such concept as not using cursors. Oracle needs to parse and compile and execute SQLs as cursors.
The issue is WHERE* you do the work?
Do you use the cursor (SQL) to do it for you? Or do you pull the data into another language, like PL or Java and process it there?
And the performance mantra in this case is a very fundemantal Maximize SQL and minimize PL/Java/etc+.
So do not do in PL/SQL what you can do in SQL only. It is a lot slower to pull data from the SQL engine into the PL engine. And then push that very same data from the PL engine back to the SQL engine. Like the following for example:
-- poor design, poor performance
for employee in (select e.* from emp e where e.deptid = 123 )
loop
insert into tab2 values( employee.empid, employee.name );
end loop;You do not need to use PL (or Java) in this case. The SQL language is more than able to do this better and faster than any other language... as it is closer to the data.
So the following is far more optimal code. Instead of the above PL/SQL code, we can simply do it as:
-- optimal design: maximizing SQL and letting it to as much of the work as possible
insert into tab2 select e.empid, e.name from emp e where e.deptid = 123;

Deleting multiple rows from SUD dialog table

Hi,
I have some SUD dialog tables that I would like to delete some rows from. I can select and delete all or one row (using a SUD button that finds out which one row was selected or if all, and then deleting them with the table.rows.remove command), but I seem to have troubles if I want to select multiple rows (either in a range, ex: rows 3-10, or non-sequential, ex: 1, 4, 6 and 23). I just started working on this but thought maybe someone has already done this and can save me the trouble!
Thanks!
Julia Moeller

Hi Julia,
Just a quick guess-- try looping backwards and deleting the last rows first:
FOR i = 10 TO 3 Step -1
table.rows.remove i
NEXT
Haven't tested it, so no guarantees,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to insert multiple rows in the database table with the high performance

Hello everybody,
I am using the struts,jsp and spring framework. In my application there are 100s of rows i have to insert into the database 1 by 1. I am using usertransaction all other things are working right but i am not getting the real time performance.
Can anyone tell me the proper method to insert multiple records and also with fast speed

I don't know much about Spring etc, but if the jdbc Statemenet.addBatch(), Statement.executeBatch() statements let you bundle a whole lot of sql commands into one lump to execute.
Might help a bit...

Retriving multiple rows from the same table

Hi all,
I have a table consisting of an id column as well as a start and end date.
What I want to do is select the difference between start and end time for different id's.
For example select (endtime where id = 1 - starttime where id = 2).
Is this possible to do using a single select statement?
Thanks ppl

OK, so you want every combination of dropped_id 500 with dropped_id 1000? For example:
WITH test_data as (SELECT 500 dropped_id, TO_DATE('13/05/2009', 'DD/MM/YYYY') insert_date, TO_DATE('12/05/2009 12:00:00', 'DD/MM/YYYY HH24:MI:SS') starttime, TO_DATE('12/05/2009 12:30:00', 'DD/MM/YYYY HH24:MI:SS') endtime FROM DUAL UNION ALL
SELECT 500, TO_DATE('12/05/2009', 'DD/MM/YYYY'), TO_DATE('11/05/2009 12:04:00', 'DD/MM/YYYY HH24:MI:SS') starttime, TO_DATE('11/05/2009 12:41:00', 'DD/MM/YYYY HH24:MI:SS') endtime FROM DUAL UNION ALL
SELECT 500,TO_DATE('11/05/2009', 'DD/MM/YYYY'), TO_DATE('10/05/2009 12:18:00', 'DD/MM/YYYY HH24:MI:SS') starttime, TO_DATE('10/05/2009 12:59:00', 'DD/MM/YYYY HH24:MI:SS') endtime FROM DUAL UNION ALL
SELECT 1000,TO_DATE('13/05/2009', 'DD/MM/YYYY'), TO_DATE('12/05/2009 12:30:00', 'DD/MM/YYYY HH24:MI:SS') starttime, TO_DATE('12/05/2009 13:30:00', 'DD/MM/YYYY HH24:MI:SS') endtime FROM DUAL UNION ALL
SELECT 1000,TO_DATE('12/05/2009', 'DD/MM/YYYY'), TO_DATE('11/05/2009 12:41:00', 'DD/MM/YYYY HH24:MI:SS') starttime, TO_DATE('11/05/2009 14:30:00', 'DD/MM/YYYY HH24:MI:SS') endtime FROM DUAL UNION ALL
SELECT 1000,TO_DATE('11/05/2009', 'DD/MM/YYYY'), TO_DATE('10/05/2009 12:19:00', 'DD/MM/YYYY HH24:MI:SS') starttime, TO_DATE('10/05/2009 13:30:00', 'DD/MM/YYYY HH24:MI:SS') endtime FROM DUAL)
-- end test data
SELECT tab1.insert_date insert_date1, tab2.insert_date insert_date2, tab1.dropped_id dropped_id1,   tab2.dropped_id dropped_id2, ROUND(tab2.endtime - tab1.starttime,2) time_diff
   FROM test_data tab1
CROSS JOIN test_data tab2
WHERE tab1.dropped_id = 500
    AND tab2.dropped_id = 1000;
INSERT_DA INSERT_DA DROPPED_ID1 DROPPED_ID2 TIME_DIFF
13-MAY-09 13-MAY-09         500        1000        .06
12-MAY-09 13-MAY-09         500        1000       1.06
11-MAY-09 13-MAY-09         500        1000       2.05
13-MAY-09 12-MAY-09         500        1000        -.9
12-MAY-09 12-MAY-09         500        1000         .1
11-MAY-09 12-MAY-09         500        1000       1.09
13-MAY-09 11-MAY-09         500        1000      -1.94
12-MAY-09 11-MAY-09         500        1000       -.94
11-MAY-09 11-MAY-09         500        1000        .05
9 rows selected.

Want to insert multiple rows in table using EO

Hi,
I have one requirement where I need to insert multiple rows at once in table lets say Previous Employers.
What I am trying to do is I have created few textinputboxes and getting there values and putting in HashMap.
And manually inserting the rows to EO. I am not getting any error but the data is not populating in Table.
here is the code snap ...please suggest!!
public void updateKoelHrPreEmpVO(HashMap map)
OADBTransaction txn = getOADBTransaction();
//HashMap map = new HashMap();
KoelHrPreEmpVOImpl empVO = getKoelHrPreEmpVO1();
KoelHrPreEmpVORowImpl fetchedRow = null;
int fetchedRowCount = empVO.getFetchedRowCount();
RowSetIterator deleteIter = empVO.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
if(txn.isLoggingEnabled(2))
txn.writeDiagnostics(this,"Removing rows from KoelHrPreEmpVO :: Current count :: " + fetchedRowCount ,2);
//System.out.println("Removing rows from KoelHrPreEmpVO :: Current count :: " +fetchedRowCount);
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount-1);
for (int i = 0; i < fetchedRowCount; i++)
//System.out.println("Removing Row :: "+i);
if(txn.isLoggingEnabled(2))
txn.writeDiagnostics(this,"Removing row :: " + i ,2);
fetchedRow = (KoelHrPreEmpVORowImpl)deleteIter.getRowAtRangeIndex(i);
fetchedRow.remove();
getTransaction().commit();
deleteIter.closeRowSetIterator();
if(empVO.getRowCount() == 0) {
Row row = null;
KoelHrPreEmpVORowImpl insertRow = null;
empVO.first();
if(txn.isLoggingEnabled(2))
txn.writeDiagnostics(this,"Inserting rows to KoelHrPreEmpVO :: " ,2);
try
for(int i=1; i<=4; i++) {
insertRow = (KoelHrPreEmpVORowImpl)empVO.createRow();
insertRow.setEmployeeNumber(map.get("EmployeeNumber").toString());
insertRow.setPersonId(new Number(map.get("PersonId").toString()));
insertRow.setEmployer(map.get("Employer"+i+"").toString());
insertRow.setStartDate(Date.toDate(map.get("StartDate"+i+"").toString()));
insertRow.setEndDate(Date.toDate(map.get("EndDate"+i+"").toString()));
insertRow.setEmployer(map.get("Designation"+i+"").toString());
empVO.insertRow(insertRow);
insertRow.setNewRowState(Row.STATUS_INITIALIZED);
getTransaction().commit();
catch(SQLException ex)
ex.printStackTrace();
Regards,
Mukesh

1. Pls check if the create() methos in EOImpl is in place, setting the primary key.
2. Even though we insert values in this fashion , it only gets inserted if user performs any action, like manipulates some column. Pls check if there is any mechansm to make the row dirty ( as if done by user).
Srikanth

Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

I need to insert multiple rows into a database table using the JDBC adapter (receiver).
I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

Hi Bhavesh/Kanwaljit,
If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
Why i am saying this?
If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
<i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
Doesnt this mean that rows are inserted one by one?
Correct me if i am wrong.
This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
Regards,
Sumit

Inserting multiple rows into a table (using sequences)

Hi!
I want to insert multiple rows into a db table, but I don't know how.
I know how to insert 1 row using a sequence:
I put all the fields in the jsp form's page and in the submit page I put something like this:
<jbo:Row id="myRow" datasource="ds" action="Update" rowkeyparam="MyRowKey" >
<jbo:SetAttribute dataitem="*" />
</jbo:Row>
But how can I insert multiple rows like this:
Id          Name
1          ana
2          monteiro
3          maria
Thanks!

Hi Chris,
I think this should give you what you need: Working with a Multiple Select List Item
--Jennifer

Inserting multiple rows with single insert statement ?

Hi ,,
Consider a PL/SQL procedure.
I want to pass an array of values and insert in a table with a single statement.
Moreover I want to call this procedure to insert multiple rows from OCI program.
Can some body help ? :(
Thanks
Chandu

Hi Vincent,
Regular array insert which you have mentioned works in case of insert statement(This is to eliminate multiple calls to server)
Will it work for passing array to Stored procedure, in this case procedure will be called only once with an array.
It will be of great help if you give an example.
Thanks
Chandra

FWD: Re: Retrieving multiple rows from a database into morethan

There are two ways to do this that I cn think of right off the bat.
One is to create a class of objects that can receive the entire row, and
give it methods that will return each of the individual objects that you are
looking for when called. If you use INTO :ARRAY, you get the advantage of
being able to pass the array anywhere in your system for the 'split up'
processing.
Two is to do basically the same thing, but instead doing the 'split up'
during a for loop. This will appear to slow down your query, however, as
extra processing will be occuring in terms of memory allocation and copying.
I'm sure there other approaches. This was simply what came to mind at
midnight, after a long day :-).
At 01:33 AM 6/4/96 +0000, you wrote:
Does anyone know of a way to retrieve multiple rows from a single table in an
RDB database into more than 1 object, using a single SQL call?
I have a single table that I wish to use some fields to populate one object
and some others to populate another.
The FOR clause only allows one object to be specified.
The INTO :ARRAY clause also seems to only allow one object to be specified.
I would appreciate any help.
Regads,
Steve Isaac
Hydro Electric Commission
Hobart TAS 7001
Australia
[email protected]
James Urquhart Voice: (510)869-3400
[email protected] Fax: (612)921-8243
Forte Consulting

wow, that was pleasant, the usual format goes:
Newb: I have a problem, fix it for me
Forum: Here's a link explaning the concept you obviously don't grasp
Newb: No, fix it FOR me
Forum: I'll fix you!
Newb: WAAAAH!
Forum: BAN!

Insert multiple rows in a table

Hello Apex expert,
I need help on insert multiple rows. it may look easy but I don't know how to do it.
I have a table (with name found_table) which has these fields: found_ item_id, item_name, current_location, cost_center, tag_number. Also, I have a table (with the name transition) which has these fields: transition_id, found_item_id (FK to found_table), from_location, to_location, From_cost_center, to_cost_center, tag_number.
I have an interactive report on found_table which I would like to add checkbox to all rows of the report. When the user checks any rows and press submit, I would like to send all these selected rows to another page which I have a form on transition table. The user will select a to_location and to_cost_center from this page (by the way from_location and from_cost_center and tag_number is the same as current_location and cost_center, tag_nuber from found_table, which I figured it out how to show those as a default in the new form). Now I want when a user selects the new location and cost center and press submit, all those selected rows be inserted in transition table with new locations.
I read several threads on forum, but I could not find a solution for my problem. I will appreciate your help.
Thanks,
Atousa

Hello again,
I created a report with check box. I also added two selected list at the top of the region to select the location and cost center. Also, there is a transfer button(as submit) to insert the new data to table. Now I need the insert process. I tried different insert process but none of them is working for me:(((
I created an example of what I need to do in the apex that you can take a look and give me some advise. The link is:
What I need to do is:
When a user selects several rows by using checkbox and selects To_LOCATION, and TO_COST_CENTER from selected list, and clicks on transfer, all the data should be insert in to another table with the name transition as follows:
from found table to transition table
found_item_id(pk) found_item_id (fk)
current_location from_location
cost_center from_cost_center
tag_number tag_number
selected list (to_location) to_location
selected list (to_cost_center) to_cost_center
Please help me on that. I appreciated.
Atousa
Edited by: Atousa.M on Jul 21, 2011 10:55 AM

Insert multiple rows from cursor to table

Similar Messages

Maybe you are looking for