Insert new Column in Reporting Cockpit (Portfolio Management)

Dear colleagues;
Any of you could change and insert a new column in Reporting Cockpit for BCV consult?
I need to insert a new column with a formula (operation with more than two other column).
How yo can activate this BCV Consult?
Best regards.
Mariano

Dear Guru's;
I have the solution.
I solve this problem with the BRF Plus application.
Watch this site --> Business Rule Framework plus [original link is broken]
And go to the BCP Admin link in SAP PPM in Business Context Viewer -> Configuration center -> BCV Consult.
Best regards.

Similar Messages

How to add new column in report painter

Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

Option + arrow keys suddenly inserts new columns

This happens frequently when I work in Numbers.
When I shall edit text in a cell, option + > and option + < all of a sudden cease to work. Instead of jumping to next or previous word, a new column is inserted.
I don't know what causes it. I haven't found another solution than closing the document and reopen it.
Fred

I always edit text directly in cells and option + arrow keys normally jump to next or previous word.
Yes they are greyed out for me too.
I just noticed that if I by mistake press Cmd + return (instead of option + return) when I want to edit, it causes option + arrow keys to insert new columns. I can revert to normal by placing the cursor in the formula bar and using option + arrows. After that option + arrow keys jump to next or previous word also when I edit directly in cells.
Thanks for telling about using the formula bar. Now I don't have to close and reopen the document.

Problem while inserting new Column in JTable

Hi,
I am facing Problem while inserting new Column in JTable.
I have a JTable with one inherited ColumnModel class.
When I am adding the column and moving towards the corresponding location, it moves successfully.
but if I am adding another column or making any changes to table column structure the table retains the defualtcolumn structure.
please help me to solve this..
Regards
Ranjith.........

Maybe this example will help:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=579527

How to add new column in Report ME2L

Dear Sir,
We are using ME2L for various purposes . In the ME2L report we need to add 2 new columns i.e Item Delivery Date and WBS Element .
Although in the standard ME2L report , after the basic list generation , there have been provided 2 icons for getting the report displayed with either WBS Element or with Delivery Date . It means we can not get both the column Delivery Date and WBS Element available simultaneously in the standard ME2L report .
We request you to kindly guide us as how can we add these column in the ME2L report pl . We are on ECC-6.0 and not having enhancement package 4.0 .
Kindly help us pl .
Regards
Sonia Agarwal

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

New column to report painter

Hello ABAP Gurus,
There is a report created with Report Writer (S_ALR_87013000) and I should add some extra columns to the end of it. The problem is that the new columns are not contained by the basic keyfigures of Report Painter; they should be red from masterdata: different fields from table AUFK.
How can I add these columns? Is it possible to define own keyfigures? Or is any other way to enhance this report?
Thanks,
Krisztian

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

ADD NEW COLUMN MB51 REPORT

I need to add a new column to standard SAP report MB51. The new column information will be getting from delivery table (LIKP).
We are on SAP R/3 4.7. Please advice.
Thanks.

SPRO->SAP Referance IMG->Inventory Management and Physical Inventory->Reporting->Define Field Selection for Material Document List
Click New Entry and add the column you required.

Adding of new column in report for downpayment

Dear Experts,
We want to add column for downpayment in report S_ALR_87013019 for which we have created a new report with the help of GRR2, (report)602 - (Description)internal orders and have selected its sub category 60BU-001 - Budg/act/commitm, also we have created a new column for downpayment and have assigned valuation type - 61(Downpayment) and valuation - zero(Legal valuation).But while posting downpayment the report is not getting updatedwith the downpayment values. The internal order that is being created is a statistical order but even if real orders are assigned still the values are not getting displayed.
Please tell us the combination of valution type and valuation or any other characteristic that requires to be made for updating the downpayment column.
Thanks & Regards
Edited by: Aniruddha B. Mahalle on Feb 21, 2012 11:25 AM

hi
check cost element is created also check is there any exclustion of cost element setting done.
Edited by: AP on Feb 21, 2012 11:50 AM

Adding new column in Report

Hi All,
I need to add regulation requirement ID and Description in Risk and Control Matrix report(F7).
I have done the table entry in the required view cluster those are:
VC_GRFNREPCUST
VC_GRFNREPCOLUMNSC.
I am able to see the new column in the report output but the entire column is blank. When i try for regulation the value is populated but not for regulation requirement.
Am i missing any configuration?? I am struggling for an week.
Please help if you already come across this requirement. I highly appreciate for your time and help.
Thanks
Gourab

Hi Gourab,
You can check for the table: V_GRFNREPCOLUMN
Which lets you to do the following:
1) Copy an existing report
2) Check all the technical adjustments
3) change the columns for this report
See if this helps.
Regards,
Ameet

Want to add one new column in Report form

Hi all,
I have searched in forum but not able to find the answer.
I want to add one new column in form 12KST1C. I have added one column PR commitment in left and saved the form, it is showing in form but when i am running the report again then pr commitment column which i have added in form is not coming in report.
How to activate this form or column?
Help me....in doing so...

If you are copying the 12KST1C to Z12KST1C and executing the s_alr_8701333 report, you will not see the new column added to Z12KST1C
With the new Form Z12KST1C, create a new Report Z12KST1C and assign a new TCODE. Also you have to select all rows and column of form Z12KST1C
TCODE CJE5
Select the form Z12KST1C
Extras--Drildown display --Select Rows and columns
Select the all colhmns by F9
Hope this helps.
Edited by: psconsultant on May 20, 2011 8:42 AM

Add new column to report S_ALR_87013568

All,
I have given a requirement to add a new column in the sap standard report S_ALR_87013568.
Any info how to enhance this report.
1. one suggestion given by my collegues saying we need to new report. I don't have any info how this report is created. is this report created using report or some other tool ?
2. Cloning of the same report into a new name and make changes. is it right way ?
a®

This report is developed by using report painter.
you will be able to add new column by changing th report layout / form. you can do this in CJE4. or else create new form by copying the form 11ERL1E and change the columns. then you create a report in CJE1 assigning the above form.

New Column in Report

Hi Experts,
I am creating a report and stuck, Let me give some context and then explain the problem.
I am having a characteristic called Cost Center which is a hierarchy and few more like Project Description, Project EClassification.
Now the requirement is to create a report, which has a column called DIVISION, and this is related to Cost Center Characteristic in a way that few cost centers make up a division. and the report could be sorted on other characteristics like Project Description, Project Classification.
Eg:A and B cst centers make up X division.
Now the problem is that, How to create this new column, called division.
I have created a structure and correspondingly restricted, it worked, but the sorting according the Project Description or Project Classification isnt working. Even if i sort it according to Project Description in Query, its sorting in the corresponding Divisions but not the entire column.
Can any one help me out please
points promised
thanks
AB

Hi Arun,
What I got from you is you want to display in report data based on the characteristic which is sorted and which is not part of structure in rows( basically a characteristic structure). If this is the case put ur characteristic above the structure you defined and you can sort the characteristic by right clicking on it.
Hope this helps.
Madhav

Trying to add new columns to Report painter Report

Hi Experts,
I created a report painter report by copying an already existing report. In addition I wanted to add extra columns to this report but after adding a few and coming to the last page of the existing report when i try to add a new column the system gives me an error message
Insufficient space on current page -> moving not possible
    Message no. KH581
As this is the last page, I am not able to add extra columns to this report. How can I go to the next page and add columns to this existing report. Your responses are highly appreciated.
Regards
ASLV

Hello,
This is a constraint in the system.
The solution maybe is to define narrower columns
because there is a hard restriction in ABAP to have at least 255 digits
on one page.
The message KH581 is processed because there is not enough space left
on the first horizontal page. So if you first add a new horizontal page
you can add the new column on the second page. Also if you decrease the
column width of the columns to get more space left on the first page you
can add the new columns.
I hope it helps.
REgards,
REnan

Howto INSERT new column in correct position

Currently I have a Table with 19 column, but it should have 20. I would like to insert after column 15, the new 16th column, so that it will be 20.
I know how to alter a table, but how do I tell it to insert it as the new 16th column ?
alter Table TABLE
add
COLUMN16 varchar2(10);
THanks!
TGIF

Again, it depends.
If you just want to fix your query
Create Table TABLE AS
Select column1, to_char(column2) column2, column3 from Table1
UNION
Select column1, column2, column3 from Table2;If you want to fix Table1
ALTER TABLE table1
ADD( column2_varchar2 VARCHAR2(30) );
UPDATE table1
SET column2_varchar2 = to_char( column2 );
ALTER TABLE table1
DROP( column2 );
ALTER TABLE table1
RENAME COLUMN column2_varchar2 TO column2Taking a step back, though, why are you creating a new table that is the result of unioning two other tables? Is this a one-time data model change? Or is this part of some ongoing process?
Justin

Insert new Column in Reporting Cockpit (Portfolio Management)

Similar Messages

Maybe you are looking for