Inserting data into relational views of object tables

I hope someone could help me to solve the following problem:
I would like to design an object-relational database in O8i. Unfortunatly the client-software (GIS) can only understand relational data (except the object type 'geometry'). So I created relational views on my object tables. But now it is not possible to insert data in those views. Do I have to create triggers on those views for inserting data ???
Nevertheless: Updating data in views makes no problems.
Thank you for reading this and I look foreward to hearing from you soon.
Christian Heil

Hi Mohammed,
I guess following is your requirement
List1 tile is attached to "BOList1". On button press you wanted the data to be persisted to Business object "BOList1History"
I assume that you have created "BOLIst1History" properly by associating a write Bdoc etc etc.
Write a method in Business object "BOList" called ZUpdateHistory. This new method should contain code for creating an instance of "BOLIST1History" and fill the property values as per your requirement. Call this method from the Button press event as follows
anchor.bo.ZUpdateHistory
Hope this helps
Regards
Ganesh Datta

Similar Messages

Inserting data into a view

Hi,
How to insert data into a view of one table

Same as for the underlying table:
INSERT INTO <view_name>(<col1>, <col2>, ..., <coln>) VALUES (<val1>, <val2>, ..., <valn>);
Cheers,
Colin

INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

Hi All,
I have to insert the data into a SQL SERVER 2005 Database table.
I am able to insert the data into a normal SQL Server table.
When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
Had anybody tried this??
There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
Thanks
V Kumar

Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
I had followed that note, but still it is not working for me.
But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
Thanks
V Kumar

Best way to insert data into a non indexed partitioned table?

Hi,
I've a rather basic question that I haven't been able to find an answer to so hope that someone may be able to help.
We need to insert sales data into a partitioned table that is range partitioned on sales date. The incoming sales data can span a number of days, e.g. 31-JUL-2007 through to 04-AUG-2007 inclusive. I've come up with two approaches and would like to know which you would recommend and why?
Approach 1: Load data into each individual partition using a statement like:
INSERT /*+ APPEND */ INTO sales PARTITION (sales_20070731) SELECT * FROM sales_new WHERE sales_date = TO_DATE('31-AUG-2007','DD-MON-YYYY')
Approach 2: Load data into the entire table using a statement like:
INSERT /*+ APPEND */ INTO sales SELECT * FROM sales_new
Thanks

You need to compare both approaches by creating simple test case.
But there is no advantages in approach 1until you will have index on sales_date column.
With index these approaches are comparable and you can choose whatever best fits to your requirements.
Best Regards,
Alex

Inserting data into po_lines_archive_all

I',m making a web app. using the Jdev (RUP4) with OA Extension.
I need to be clear about if i'm allowed to insert data into for instance the po_lines_archive_all table without using any API's (assuming that I'm following the described approch within the framework)?
In the case I'm not allowed, where do I locate the API which could do the trick?

hi Jaco Verheul and tapashray
first of all it's not po_lines_archive_all, but PO_lines_all (sorry that's my mistake)
If you look at the mentioned version of the Oracle Order Management Open Interface APIs page 2-151 then you find the following sample code:
Create Operation Example 2
Inserting a new line into an existing order.
Warning: You cannot insert new lines (or, process any other
entity) belonging to different orders in one process order call
-- NEW LINE RECORD
l_line_tbl(1) := OE_ORDER_PUB.G_MISS_LINE_REC;
-- Primary key of the parent entity (If not passed, this will be retrieved
from the parent record, p_header_rec, if it was also passed to process order
else there will be an error in the processing of this line).
l_line_tbl(1).header_id := 1000;
-- Attributes for the new line
l_line_tbl(1).inventory_item_id := 311;
l_line_tbl(1).ordered_quantity := 1;
-- Indicator that a new line is being created
l_line_tbl(1).operation := OE_GLOBALS.G_OPR_CREATE;
-- CALL TO PROCESS ORDER
OE_ORDER_PUB.Process_Order(........
-- Passing just the entity records that are being created
p_line_tbl=> l_line_tbl
-- OUT variables
And since I want to inserting a new line into an existing order that should be OK right? There is also sample code on how to update, delete etc, in many other scenarios.
The link Jaco Verheul is refering to does not work at the time, so I will check it later
Thanks,
Michael

Insert data into multiple entities at once using a view object

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)?

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)? Peter:
This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
A) You have to mark the entities as both updateable (not read-only) and not reference-only.
B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
To turn on diagnostic, go to the IDE,
1. Select the project.
2. Do right mouse click and select "Project Settings..."
3. On the Settings dialog, select Configurations/Runner.
4. In the righthand side pane, you should see a textbox for "Java
Options". Please add the following JVM switch:
-Djbo.debugoutput=console
Then, rerun. The run command should include
-Djbo.debugoutput=console as in
"D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
Thanks.
Sung

Insert data into the xml schema-based xmltype table problem!

Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
     
     <xs:simpleType name="RoutingType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Synch"/>
               <xs:enumeration value="Asynch"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="StatusType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACTIVE"/>
               <xs:enumeration value="VOID"/>
               <xs:enumeration value="PENDING"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="SenderApplicationType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PR"/>
               <xs:enumeration value="CR"/>
               <xs:enumeration value="POS"/>
               <xs:enumeration value="CPP"/>
               <xs:enumeration value="Other"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ServiceTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IS"/>
               <xs:enumeration value="WS"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RouteDirect">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Request"/>
               <xs:enumeration value="Reply"/>
               <xs:enumeration value="None"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="Indicator">
          <xs:annotation>
               <xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
          </xs:annotation>
          <xs:restriction base="xs:string">
               <xs:enumeration value="YES"/>
               <xs:enumeration value="NO"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RuleType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ControlAct"/>
               <xs:enumeration value="WSPolicy"/>
               <xs:enumeration value="AccessControl"/>
               <xs:enumeration value="Certification"/>
               <xs:enumeration value="MessageConformance"/>
               <xs:enumeration value="Variant"/>
               <xs:enumeration value="Routing"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="HL7Result">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACCEPT"/>
               <xs:enumeration value="REFUSE"/>
               <xs:enumeration value="REJECT"/>
               <xs:enumeration value="ACK"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="IIPType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PUT"/>
               <xs:enumeration value="GET/LIST"/>
               <xs:enumeration value="NOTIF"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ProfileTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IIPProfile"/>
               <xs:enumeration value="BizOperationProfile"/>
               <xs:enumeration value="OrchestrationProfile"/>
               <xs:enumeration value="DomainObjectProfile"/>
               <xs:enumeration value="ServiceProfile"/>
               <xs:enumeration value="ExceptionProfile"/>
               <xs:enumeration value="CustomizedProfile"/>
               <xs:enumeration value="SystemProfile"/>
               <xs:enumeration value="HL7XMLSchemaProfile"/>
               <xs:enumeration value="EnricherParametersProfile"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ParameterType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="String"/>
               <xs:enumeration value="Object"/>
               <xs:enumeration value="Number"/>
               <xs:enumeration value="Document"/>
          </xs:restriction>
     </xs:simpleType>
     
     
     
     <xs:complexType name="ProfileType">
          <xs:annotation>
               <xs:documentation>
          1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
          2.ProfileID used to uniquely identify the current profile
          3.ProfileData used to hold all the necessary profile related data
          </xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="ProfileID" type="ProfileIDType">
                    <xs:annotation>
                         <xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ProfileData" type="ProfileDataType">
                    <xs:annotation>
                         <xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="ProfileIDType">
          <xs:annotation>
               <xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
          </xs:annotation>
          <xs:attribute name="ID" type="xs:ID" use="required">
               <xs:annotation>
                    <xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Name"/>
          <xs:attribute name="Description"/>
          <xs:attribute name="Version">
               <xs:annotation>
                    <xs:documentation>version of the profile data</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Type" type="ProfileTypeType" use="required">
               <xs:annotation>
                    <xs:documentation>value to identify the ProfileType type within
                    IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
                    ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
                    EnricherParametersProfile,CustomizedProfile
                    </xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Status" type="StatusType" default="ACTIVE">
               <xs:annotation>
                    <xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          
     </xs:complexType>
     <xs:complexType name="ProfileDataType">
          <xs:annotation>
               <xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
          </xs:annotation>
          <xs:choice>
               <xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
                    <xs:annotation>
                         <xs:documentation>Enricher Parameters related profile data
               1. one instance of this type may contains all the related System metadata.
               2. idType part may use to identify different version/release/status
               </xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ExtendProfileData" type="ExtendProfileDataType">
                    <xs:annotation>
                         <xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="ExtendProfileDataType">
          <xs:sequence>
               <xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParametersDataType">
          <xs:sequence>
               <xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParameter">
          <xs:sequence>
               <xs:element ref="Enricher"/>
          </xs:sequence>
          <xs:attribute name="serviceName" type="xs:string" use="required"/>
          <xs:attribute name="interactionID" type="xs:string"/>
     </xs:complexType>
     <xs:element name="Enricher">
          <xs:annotation>
               <xs:documentation>Comment describing your root element</xs:documentation>
          </xs:annotation>
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Parameters" type="Parameters"/>
                    <xs:element ref="Section" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="ValueType">
          <xs:attribute name="field" use="required"/>
          <xs:attribute name="value"/>
          <xs:attribute name="action"/>
     </xs:complexType>
     <xs:element name="Section">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
               </xs:sequence>
               <xs:attribute name="path" use="required"/>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="Parameters">
          <xs:sequence>
               <xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:attribute name="name" use="required"/>
                         <xs:attribute name="reference"/>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleList">
          <xs:annotation>
               <xs:documentation>an array of rules</xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleProfile">
          <xs:attribute name="RName" use="required"/>
          <xs:attribute name="RType" type="RuleType" use="required"/>
          <xs:attribute name="Status" default="ON">
               <xs:annotation>
                    <xs:documentation>By default is ON (or if is missing)</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Order"/>
          <xs:attribute name="Direction" type="RouteDirect">
               <xs:annotation>
                    <xs:documentation>Request / Reply</xs:documentation>
               </xs:annotation>
          </xs:attribute>
     </xs:complexType>
     
     
     
     <xs:element name="Profile" type="ProfileType">
          <xs:annotation>
               <xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
          </xs:annotation>
     </xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>

<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
     <ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
     <ProfileData>
          <EnricherParametersProfileData>
               <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="PROCESSING_CODE">
                              <Value field="value" value="T"/>
                         </Section>
                         
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="RECEIVER_NETWORK_ADDRESS">
                              <Value field="value" value="prsunew.moh.hnet.bc.ca"/>
                         </Section>
                         <Section path="RECEIVER_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">

<Enricher>
     <Parameters>
          <Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
     </Parameters>
     <Section path="HEADER">
          <Section path="HL7_STANDARD_VERSION">
               <Value field="value" value="V3PR2"/>
          </Section>
          
          
          <Section path="PROCESSING_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="PROCESSING_MODE_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
               <Value field="value" value="NE"/>
          </Section>
          
          
          <Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
               <Value field="extension" value="SIT1"/>
          </Section>
          
          <Section path="RECEIVER_APPLICATION_NAME[0]">
               <Value field="value" value="receiverAppName"/>
          </Section>
          
          
          <Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
               <Value field="extension" value="receiverOrgId"/>
          </Section>
          <Section path="SENDING_APPLICATION_NAME[0]">
               <Value field="value" value="NLPRSCLNT"/>
          </Section>
          
          
          <Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="3001"/>
          </Section>
          <Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="HIAL_USR"/>
          </Section>
     </Section>
     <Section path="PAYLOAD">
          
          
          <Section path="AUDIT[0]/AUDIT_INFORMATION">
               <Value field="code" value="LATEST"/>
               <Value field="codeSystem" value="PRSAuditParameters"/>
          </Section>
          
          <Section path="CONFIDENCE/CONFIDENCE_VALUE">
               <Value field="value" value="100"/>
          </Section>
          
          <Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
               <Value field="value" value="false"/>
          </Section>
          
          <Section path="JURISDICTION/JURISDICTION_TYPE">
               <Value field="value" value="NL"/>
          </Section>
          
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
               <Value field="code" value="GRS_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
               <Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
               <Value field="code" value="GRS_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
               <Value field="code" value="GRS_ORGANIZATION_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
               <Value field="code" value="GRS_PERSONAL_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
               <Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
               <Value field="code" value="GRS_TELEPHONE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
               <Value field="code" value="PRS_CONDITION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
               <Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
               <Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
               <Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
               <Value field="code" value="PRS_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
               <Value field="code" value="PRS_NOTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
               <Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
               <Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
               <Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
               <Value field="code" value="PRS_STATUS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
               <Value field="code" value="PRS_WORK_LOCATION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
               <Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
               <Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
               <Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
               <Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
               <Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
          </Section>
          
          <Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
               <Value field="value" value="LIC"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
               <Value field="code" value="PrincipalPerson.name.value.family"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
               <Value field="value" value="A"/>
          </Section>
     </Section>
</Enricher>
     </EnricherParameter>
          </EnricherParametersProfileData>
     </ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?

Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation?

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Inserting Data into nested table

I am exploring the differences between OBJECT & RECORD.
As i am still in process of learning, I found that both are structures which basically groups elements of different datatypes or columns of different datatypes, one is used in SQL and other is used in PL/SQL, please correct me if I am wrong in my understanding.
Below i am trying to insert data into an table of type object but i am unsuccessful can you please help.
CREATE OR REPLACE type sam as OBJECT
v1 NUMBER,
v2 VARCHAR2(20 CHAR)
---Nested Table---
create or replace type t_sam as table of sam;
--Inserting data----
insert into table(t_sam) values(sam(10,'Dsouza'));
Error Message:
Error starting at line 22 in command:
insert into table(t_sam) values(sam(10,'Dsouza'))
Error at Command Line:22 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
*Cause:
*Action:

Ariean wrote:
So only purpose of equivalent SQL types concept of nested tables is to use them as one of the data types while defining an actual table?
Sort of - you can definitely use them for more than just "defining an actual table". (I'm fairly certain you could pass a nested table into a procedure, for example - try it, though - I'm not 100% sure on that - it just "makes sense". If you can define a type, you can use it, pass it around, whatever.).
Ariean wrote:
And that nested table could be a record in SQL or an Object in PLSQL or just simple datatype(number,varchar etc)?
Nested tables are just like any other custom data type. You can create a nested table of other data types. You can create a custom data type of nested tables.
It could get stupidly .. er, stupid O_0
CREATE TYPE o_myobj1 AS object ( id1   number, cdate1 date );
CREATE TYPE t_mytype1 AS table of o_myobj1;
CREATE TYPE o_myobj2 AS object ( id2   number, dumb t_mytype1 );
CREATE TYPE t_dumber AS table of o_myobj2;
O_0
Ok, my brain's starting to hurt - I hope you get the idea
Ariean wrote:
Secondly is my understanding correct about OBJECT & RECORD?
I can't think of any benefit of describing it another way.

Insert data into nested tables

Hi,
Can someone please advice how can I insert data into nested tables using APEX.
I have a table "employee" and a column addresses of type address_table_type object which has address1, address2, address3 columns. I want to create form in APEX that will collect address1, address2, address3. I wonder how to do this? should the item be based in database item? if yes then how can I point to the column of address_table_type
Thanks
--Aali

Can you post your tabB type, sample data, and your exact insert statement?
Is it overwriting or not commiting the inserts?
Have you traced your session to see what is happening?

Insert data into msql thru table trigger

Hi,
I installed dg4msql 11.2 and I would like to insert some data into our msql thru one of our Oracle table after insert table,
I used the syntax below
insert into test@dg4msql ("PN") values (:new.PN)
but the below error problem if I insert data into my Oracle table,
ORA-02054: transaction 4.17.15898 in-doubt
ORA-028500, connect from ORACLE to a non-Oracle system returned this message
[Oracle][ODBC SQL Server Driver][SQL Server] Invalid object name "RECOVER.HS_TRANSACTION_LOG
Do I have to create the HS_TRANSACTION_LOG table in my msql server to resolve this problem?
Thanks
Vincent

Vincent,
If the gateway insert is being done as part of a trigger then it will almost certainly be part of a distributed transaction so yes, you will have to create the transaction log table and the recovery user in the SQL*Server database.
As well as the gateway documentation have a look at this note in My Oracle Support -
Note.227011.1 How to Setup DG4MSQL to Use Distributed Transactions (Doc ID 227011.1)
Regards,
Mike

Insert data into linked table

Problem when you try to insert data into linked table.
I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data on tabular form appears:
"Error in mru internal routine:ORA-2001:Error in MRU: row=1,ORA-00957: duplicate column name ORA-02063:preciding line from "SHEMA_NAME", insert into "field1","field1_PK","field3",........) values (:b1,:b2,:b3.........)
Error Unable to process update.
Is it bug too?

Hi,
Have you tried to do your updates using an INSTEAD OF TRIGGER on your view? An INSTEAD OF TRIGGER allows you to update a non-updateable view.
The following book contains an excellent introduction to this topic.
"Oracle PL/SQL for Dummies"
written by Rosenblum and Dorsey
published by Wiley Publishing Inc.
The following book is also excellant reference that deals with INSTEAD OF TRIGGERS.
"Oracle PL/SQL programming
written by Steven Feuerstein
published by O'Reilly
Hope this helps.
Cheers,
Patrick Cimolini

Insert data into oracle table from XML file

I need to insert data into oracle table from XML file
If anybody handled this type of scenario, Please let me know how to insert data into oracle table from XML file
Thanks in advance

The XML DB forum provides the best support for XML topics related to Oracle.
Here's the FAQ on that forum:
XML DB FAQ
where there are plenty of examples of shredding XML into Oracle tables and such like. ;)

Drop, create and insert data into few intermediate tables

Hi All,
I need to schedule a process to drop, create and insert data into few intermediate tables on a weekly basis. Here is what i need to do in the stored procedure, which can be scheduled weekly.
DROP TABLE TABLE_NAME1;
DROP TABLE TABLE_NAME2;
DROP TABLE TABLE_NAME3;
CREATE TABLE TABLE_NAME1
CREATE TABLE TABLE_NAME2
CREATE TABLE TABLE_NAME3
INSERT INTO TABLE_NAME1 SELECT ....;
INSERT INTO TABLE_NAME2 SELECT ....;
INSERT INTO TABLE_NAME3 SELECT ....;
Any suggestions, examples or code on how to accomplish this task would be very helpful. Any question pls let me know.
Thanks in advance.

I am using the intermediate tables in an extract process. The idea was that the table would be created prior to calling the extract procedure and once the data written to the intermediate table had been processed the table would be dropped. This would be repeated each time the extract process is run. From a DBA's point or view, would it be better to just leave the table on the database and truncate it after each run or is removing it entirely best?

Load XML Document/Data into relational Table

Hi All,
I have a requirement to load data in an XML file into an oracle db and subsequently split the contents into columns in an oracle table. This has to be done on the command line from a unix box which connects to a remote oracle DB.
Can some one give me a step by step procedure to do this or point me in the right direction.
thank you

Hi,
There can be many different way we can achieve this. Mainly depending on size of XML, complexity of XML and your use of that data (e.g. you just want to insert XML into relational or you want to write something and the generate new xmls later on).
If you go to Oracle online documentation -> Oracle XML DB Developer's guide, first 3-4 chapters will give you what you need.
Regards

Inserting data into relational views of object tables

Similar Messages

Maybe you are looking for