Best way to insert data into a non indexed partitioned table?

Hi,
I've a rather basic question that I haven't been able to find an answer to so hope that someone may be able to help.
We need to insert sales data into a partitioned table that is range partitioned on sales date. The incoming sales data can span a number of days, e.g. 31-JUL-2007 through to 04-AUG-2007 inclusive. I've come up with two approaches and would like to know which you would recommend and why?
Approach 1: Load data into each individual partition using a statement like:
INSERT /*+ APPEND */ INTO sales PARTITION (sales_20070731) SELECT * FROM sales_new WHERE sales_date = TO_DATE('31-AUG-2007','DD-MON-YYYY')
Approach 2: Load data into the entire table using a statement like:
INSERT /*+ APPEND */ INTO sales SELECT * FROM sales_new
Thanks

You need to compare both approaches by creating simple test case.
But there is no advantages in approach 1until you will have index on sales_date column.
With index these approaches are comparable and you can choose whatever best fits to your requirements.
Best Regards,
Alex

Similar Messages

Is there an easier way to insert date into an MS SQL Server database ?

Is there an easier way to insert date into an MS SQL Server database without using the DateFormat?

USe a PreparedStatement and then the method setDate (or setTimestamp )
http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html

Is there a way to Insert Data into a Lookup Column Type on a SharePoint List Destination in SSIS?

Greetings.
I have successfully worked out inserting SQL data (2008 R2) into my 2010 SharePoint list (New, Update, Delete) by creating an SSIS Data Flow Task as outlined here:
http://fsugeiger.blogspot.com/2010/01/synchronise-sql-table-with-sharepoint.html
However, the problem I am running into is inserting data into the SharePoint Columns that are "Lookup" column types. I verified that all of the values I am copying from SQL into the SharePoint lookup column exist in the customn list it is pointing to. It
is important to have this column be a lookup column as it links to another custom list that has many more columns of related information.
I have read and re-read the SharePoint SSIS Adapters 2011.docx from
http://sqlsrvintegrationsrv.codeplex.com/ and the only section that seems to apply is this:
"Looking Up Values in a SharePoint List
If you have to look up a value in a SharePoint list, you can use the Lookup transformation in your data flow, and use the SharePoint List source to load the lookup table. You may have to add a Derived Column transformation or a Script component that splits
data in the lookup column on the ";#" delimiter to separate the ID value from the description.
If you are replacing values in your data with the values that you look up in the list, then loading the changed data back into SharePoint, you only have to include the ID from the lookup column. SharePoint ignores the description if you include it."
I am not sure if the above statement means that I should be passing the assocaited ID's other than the actual data into the SharePoint List destination. If that is the case, that will not really work as the lookup contains hundreds of rows. Not too mention
I have several of these lookup column types pointing to several different lists.
Any guidance in how I can put data into a SharePoint Lookup column type via Data Flow Task would be so much appreaciated.
Thank you.
My errors are:
Error: 0x0 at Data Flow Task, SharePoint List Destination: Error on row ID="1": 0x1 - Unspecified error, such as too many items being updated at once (batch), or an invalid core field value.
Error: 0xC0047062 at Data Flow Task, SharePoint List Destination [1903]: Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.PipelineProcessException: Errors detected in this component - see SSIS Errors at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListDestination.ProcessInput(Int32
inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SharePoint List Destination" (1903) failed with error code 0x80131500 while processing input "Component Input" (1912). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will

I have found a solution to my problem and thought I would share it here in case there are others who are struggling with the above scenario. If you have a better way, I would love to hear about it since my way is a bit tedious.
In a nutshell, in order to have an SSIS package put data from an OLE DB Source into a SharePoint List Destination Lookup Column, you need to pass the ID of the value that is being looked up, not the value that is in the “master” OLE DB source.
Rough explanation, OLE DB Source value for column “Approp” is “4005” --> SQL matches “4005” with the ID in the new lookup table (“4005” = ID “5” as defined in the SharePoint lookup list) --> “5” gets passed into SharePoint List destination lookup
column --> SharePoint displays “4005” and successfully links to the lookup list.
Funny thing (not really), the error(s) outlined in my original post are not related in getting data into a SharePoint Lookup column as I am now successful in getting data into the system but I am still getting the same above error(s). I think it has to do
with the ID column in the SharePoint list destination. What I can’t seem to figure out is why since I am not linking any data to that ID column (at least on new records). I am however linking it on Update and Delete and the errors mentioned above disappear
and things work well.
There are three tasks that need to get done in order to get data from SQL into a SharePoint lookup column assuming you have already set up your SharePoint lookup lists:
1. Create new lookup table(s) in SQL that has the IDs from the SharePoint Lookup list and the values coming from the “master” OLD DB Source. You can see the ID column in SharePoint by toggling it on in a view.
2. Create a SQL command that JOINs all the databases and tables so that the ID is passed and not the value into the SharePoint lookup column
3. Change the “Data access mode” to “SQL Command” instead of the “Table or view” in the OLE DB Source and paste your command into the “SQL command text:” area.
Other helpful info is that you may also need to add additional columns in the new lookup tables in SQL for the scenarios when the data is not unique. You can see this two times in my SQL command example for Units and JobTitles:
SELECT
pps.SSNm,
pps.file_updated,
pps.Employee_id,
/* pps.CheckDistNm,*/
Check_Distribution_id = COALESCE( d.ID, 0 ),
pps.Job_nbr,
pps.SeqNm,
pps.action_eff_dt,
Fund_id = COALESCE( f.id, 0 ),
Appropriation_id = COALESCE( ap.id, 0 ),
ActionCode_id = COALESCE( ac.id, 0 ),
SpecNumber_id = COALESCE( jt.ID, 0 ),
pps.Employee_id,
/* pps.Fund,
pps.Approp,
pps.Unit,*/
Unit_id = COALESCE( u.ID, 0 ),
PosNm,
PosCode,
pps.LastName,
pps.FirstName,
pps.MI
FROM
x_PPS.aReportVw.pps_screens_active AS pps
LEFT OUTER JOIN dbo.DistributionNumbers AS d ON
pps.CheckDistNm = d.Check_Distribution
LEFT OUTER JOIN dbo.Units AS u ON
pps.Fund = u.Fund AND
pps.Approp = u.Approp AND
pps.Unit = u.Unit
LEFT OUTER JOIN dbo.Appropriations AS ap ON
pps.Approp = ap.Approp
LEFT OUTER JOIN dbo.Funds AS f ON
pps.Fund = f.Fund
LEFT OUTER JOIN dbo.ActionCodes AS ac ON
pps.ActionCode = ac.ActionCode
LEFT OUTER JOIN dbo.JobTitles AS jt ON
pps.SpecNm = jt.SpecNumber AND
pps.JurisClass = jt.JurisClass

INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

Hi All,
I have to insert the data into a SQL SERVER 2005 Database table.
I am able to insert the data into a normal SQL Server table.
When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
Had anybody tried this??
There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
Thanks
V Kumar

Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
I had followed that note, but still it is not working for me.
But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
Thanks
V Kumar

Best ways to view data, total records of an application table ie VBAK

Hi all,
What is the best way to view data of an application table in the source system?
I know about SE16....but are there other ways to know details ie the total no of records and different field information about a
application table ie VBAK in source R3?
Also, using SE16 when i checked for VBAK and clicked on the "number of enteries" then it showed 0...however
when i directly checked from the sqlplus then i found about 5000 records in there in VBAK. I am not sure why
via SE16 it showed 0. Does anybody have any idea what i missed here?
Thanks...will give points for ur input.
ak

I tried "number of enteried" on se16 and it shows 0 enteries without any selection criterion...i cheked by putting relevant time range as well but it shows 0...
As i told that when i checked VBAK separately via logging to database directly then i did find 5678 rows there.
Please note that this is a new demo version....so i thought that i first need to activate the table which i did using tcode SE11. Now the VBAK table is active but still via SE16 shows 0 nuber of enteris....
Can anybody please advise here..
Thx
ak

Best way to Insert Records into a DB

hi
i have around 400000(4 lakh ) records to insert into a db , whats the optimal way to do it ,
i tried it doin g using threads i could gain only 2 seconds for 4 lakh records ,suggest me a better way

Very hard thread, poor informations u give us can not help me too much to understand really the problem.
Where do u have to 40.000K (input) records?
Those records must be only added to output table?
How many rows, and how many indexes output table has?
The cost oh each insert depends also on how many indexes dbms has
to manage on oupy table.
In general to take about 2 seconds to add to a table a large amount of rows depends on many variables (hardware performances, dbms performances and so on)
If u ahve only to insert and your input secord statys on another table,
I think that a performance way to do it is insert select, so
insert into output select * from input
If your input records statys on a text file, the best way is to use
native dbms importer
Let me know something more....
Regards

Inserting data into relational views of object tables

I hope someone could help me to solve the following problem:
I would like to design an object-relational database in O8i. Unfortunatly the client-software (GIS) can only understand relational data (except the object type 'geometry'). So I created relational views on my object tables. But now it is not possible to insert data in those views. Do I have to create triggers on those views for inserting data ???
Nevertheless: Updating data in views makes no problems.
Thank you for reading this and I look foreward to hearing from you soon.
Christian Heil

Hi Mohammed,
I guess following is your requirement
List1 tile is attached to "BOList1". On button press you wanted the data to be persisted to Business object "BOList1History"
I assume that you have created "BOLIst1History" properly by associating a write Bdoc etc etc.
Write a method in Business object "BOList" called ZUpdateHistory. This new method should contain code for creating an instance of "BOLIST1History" and fill the property values as per your requirement. Call this method from the Button press event as follows
anchor.bo.ZUpdateHistory
Hope this helps
Regards
Ganesh Datta

Best Way to Load Data in Hash Partition

Hi,
I have partitioning by Hash on a Large Table of 5 TB. We have to load Data say more than 500GB daily on that table from ETL.
What is the best way to Load data into that Big Table which has hash Partition .
Regards
Sahil Soni

Do you have any specific requirements to match records to lookup tables or it just a straight load - that is an insert?
Do you have any specific performance requirements?
The easiest and fastest way to load data into Oracle is via external file and parallel query/parallel insert. Remember that parallel DML is not enabled by default and you have to do so via alter session command. You can leverage multiple CPU cores and direct path operation to perform the load.
Assuming your database is on a linux/unix server - you could NFS load the file if it is on a remote system, but then you will be most likely limited by network transfer speed.

Inserting data into a partition.

Hi,
I am inserting 10 million rows into a partition and its consuming lot of time (>24 hrs).
I am using simple insert statement.
Is there any better way to insert data into a partition.
Thanks for your help in advance
Thanks
Manju

Hello, this has nothing to do with the fact that the target table is partitioned.
One thing you could try first-off, is a Direct Path Insert, i.e.,
INSERT /*+ APPEND */ INTO part1
SELECT...That will speed it up, but remember to do a COMMIT directly after INSERTing.
Are you sure that the SELECT isn't taking a long time in itself?
What is the value of your cursor_sharing database parameter?

Inserting data into po_lines_archive_all

I',m making a web app. using the Jdev (RUP4) with OA Extension.
I need to be clear about if i'm allowed to insert data into for instance the po_lines_archive_all table without using any API's (assuming that I'm following the described approch within the framework)?
In the case I'm not allowed, where do I locate the API which could do the trick?

hi Jaco Verheul and tapashray
first of all it's not po_lines_archive_all, but PO_lines_all (sorry that's my mistake)
If you look at the mentioned version of the Oracle Order Management Open Interface APIs page 2-151 then you find the following sample code:
Create Operation Example 2
Inserting a new line into an existing order.
Warning: You cannot insert new lines (or, process any other
entity) belonging to different orders in one process order call
-- NEW LINE RECORD
l_line_tbl(1) := OE_ORDER_PUB.G_MISS_LINE_REC;
-- Primary key of the parent entity (If not passed, this will be retrieved
from the parent record, p_header_rec, if it was also passed to process order
else there will be an error in the processing of this line).
l_line_tbl(1).header_id := 1000;
-- Attributes for the new line
l_line_tbl(1).inventory_item_id := 311;
l_line_tbl(1).ordered_quantity := 1;
-- Indicator that a new line is being created
l_line_tbl(1).operation := OE_GLOBALS.G_OPR_CREATE;
-- CALL TO PROCESS ORDER
OE_ORDER_PUB.Process_Order(........
-- Passing just the entity records that are being created
p_line_tbl=> l_line_tbl
-- OUT variables
And since I want to inserting a new line into an existing order that should be OK right? There is also sample code on how to update, delete etc, in many other scenarios.
The link Jaco Verheul is refering to does not work at the time, so I will check it later
Thanks,
Michael

What is the best way to insert massive data into an existing excel file?

dear gurus,
i am wondering that what is the best way to insert massive data into an existing excel file, more performance perspective.
the file is read from BDS , and we want to insert data into it .
the way i can think of is
1. OLE AUTOMATION
   i think performance will be a big problem
2. Office integration
    i am not sure it's facing the same performance issue ?
3 . XXL_SIMPLE_API/FULL_API
    I am not sure whether they can insert data into an existing excel file?
could you please give me some advices?
br.
jun

Hi,
If you want to APPEND data( add data to an existing excel file) from SAP, then use GUI_DOWNLOAD fm with APPEND = 'X' paramter.
Best regards,
Prashant

Best way to insert millions of records into the table

Hi,
Performance point of view, I am looking for the suggestion to choose best way to insert millions of records into the table.
Also guide me How to implement in easier way to make better performance.
Thanks,
Orahar.

Orahar wrote:
Its Distributed data. No. of clients and N no. of Transaction data fetching from the database based on the different conditions and insert into another transaction table which is like batch process.Sounds contradictory.
If the source data is already in the database, it is centralised.
In that case you ideally do not want the overhead of shipping that data to a client, the client processing it, and the client shipping the results back to the database to be stored (inserted).
It is must faster and more scalable for the client to instruct the database (via a stored proc or package) what to do, and that code (running on the database) to process the data.
For a stored proc, the same principle applies. It is faster for it to instruct the SQL engine what to do (via an INSERT..SELECT statement), then pulling the data from the SQL engine using a cursor fetch loop, and then pushing that data again to the SQL engine using an insert statement.
An INSERT..SELECT can also be done as a direct path insert. This introduces some limitations, but is faster than a normal insert.
If the data processing is too complex for an INSERT..SELECT, then pulling the data into PL/SQL, processing it there, and pushing it back into the database is the next best option. This should be done using bulk processing though in order to optimise the data transfer process between the PL/SQL and SQL engines.
Other performance considerations are the constraints on the insert table, the triggers, the indexes and so on. Make sure that data integrity is guaranteed (e.g. via PKs and FKs), and optimal (e.g. FKs should be indexes on the referenced table). Using triggers - well, that may not be the best approach (like for exampling using a trigger to assign a sequence value when it can be faster done in the insert SQL itself). Personally, I avoid using triggers - I rather have that code residing in a PL/SQL API for manipulating data in that table.
The type of table also plays a role. Make sure that the decision about the table structure, hashed, indexed, partitioned, etc, is the optimal one for the data structure that is to reside in that table.

Best way to insert 300dpi photo's into Ilustrator file for print

I am creating a 5.5 X 8 postcard style card for print. I need to place 15 photographs that are aprox. 1.5 X 2.5 each. What is the best way to insert these files so that my file doesn't become too large? I will be making a PDF of the final artwork to send to the printer. Your guidance is much appreciated!!

Link don't embed the images. Use a layered format such as .psd, .tif, or .pdf. Psd is not lossy, .tif can be lossy if you modify the default settings, .pdf you choose how much compression you want, and a small amount of compression can make a much smaller file size.
I would recomend using .psd, in cmyk color space. When you make your pdf for printing is when you will decide how much compression and which pdf preset you will use(press ready or PDF X should be a good choice). That will be your important choice.

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Insert data into the xml schema-based xmltype table problem!

Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
     
     <xs:simpleType name="RoutingType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Synch"/>
               <xs:enumeration value="Asynch"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="StatusType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACTIVE"/>
               <xs:enumeration value="VOID"/>
               <xs:enumeration value="PENDING"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="SenderApplicationType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PR"/>
               <xs:enumeration value="CR"/>
               <xs:enumeration value="POS"/>
               <xs:enumeration value="CPP"/>
               <xs:enumeration value="Other"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ServiceTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IS"/>
               <xs:enumeration value="WS"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RouteDirect">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Request"/>
               <xs:enumeration value="Reply"/>
               <xs:enumeration value="None"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="Indicator">
          <xs:annotation>
               <xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
          </xs:annotation>
          <xs:restriction base="xs:string">
               <xs:enumeration value="YES"/>
               <xs:enumeration value="NO"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RuleType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ControlAct"/>
               <xs:enumeration value="WSPolicy"/>
               <xs:enumeration value="AccessControl"/>
               <xs:enumeration value="Certification"/>
               <xs:enumeration value="MessageConformance"/>
               <xs:enumeration value="Variant"/>
               <xs:enumeration value="Routing"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="HL7Result">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACCEPT"/>
               <xs:enumeration value="REFUSE"/>
               <xs:enumeration value="REJECT"/>
               <xs:enumeration value="ACK"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="IIPType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PUT"/>
               <xs:enumeration value="GET/LIST"/>
               <xs:enumeration value="NOTIF"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ProfileTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IIPProfile"/>
               <xs:enumeration value="BizOperationProfile"/>
               <xs:enumeration value="OrchestrationProfile"/>
               <xs:enumeration value="DomainObjectProfile"/>
               <xs:enumeration value="ServiceProfile"/>
               <xs:enumeration value="ExceptionProfile"/>
               <xs:enumeration value="CustomizedProfile"/>
               <xs:enumeration value="SystemProfile"/>
               <xs:enumeration value="HL7XMLSchemaProfile"/>
               <xs:enumeration value="EnricherParametersProfile"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ParameterType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="String"/>
               <xs:enumeration value="Object"/>
               <xs:enumeration value="Number"/>
               <xs:enumeration value="Document"/>
          </xs:restriction>
     </xs:simpleType>
     
     
     
     <xs:complexType name="ProfileType">
          <xs:annotation>
               <xs:documentation>
          1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
          2.ProfileID used to uniquely identify the current profile
          3.ProfileData used to hold all the necessary profile related data
          </xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="ProfileID" type="ProfileIDType">
                    <xs:annotation>
                         <xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ProfileData" type="ProfileDataType">
                    <xs:annotation>
                         <xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="ProfileIDType">
          <xs:annotation>
               <xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
          </xs:annotation>
          <xs:attribute name="ID" type="xs:ID" use="required">
               <xs:annotation>
                    <xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Name"/>
          <xs:attribute name="Description"/>
          <xs:attribute name="Version">
               <xs:annotation>
                    <xs:documentation>version of the profile data</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Type" type="ProfileTypeType" use="required">
               <xs:annotation>
                    <xs:documentation>value to identify the ProfileType type within
                    IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
                    ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
                    EnricherParametersProfile,CustomizedProfile
                    </xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Status" type="StatusType" default="ACTIVE">
               <xs:annotation>
                    <xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          
     </xs:complexType>
     <xs:complexType name="ProfileDataType">
          <xs:annotation>
               <xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
          </xs:annotation>
          <xs:choice>
               <xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
                    <xs:annotation>
                         <xs:documentation>Enricher Parameters related profile data
               1. one instance of this type may contains all the related System metadata.
               2. idType part may use to identify different version/release/status
               </xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ExtendProfileData" type="ExtendProfileDataType">
                    <xs:annotation>
                         <xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="ExtendProfileDataType">
          <xs:sequence>
               <xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParametersDataType">
          <xs:sequence>
               <xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParameter">
          <xs:sequence>
               <xs:element ref="Enricher"/>
          </xs:sequence>
          <xs:attribute name="serviceName" type="xs:string" use="required"/>
          <xs:attribute name="interactionID" type="xs:string"/>
     </xs:complexType>
     <xs:element name="Enricher">
          <xs:annotation>
               <xs:documentation>Comment describing your root element</xs:documentation>
          </xs:annotation>
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Parameters" type="Parameters"/>
                    <xs:element ref="Section" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="ValueType">
          <xs:attribute name="field" use="required"/>
          <xs:attribute name="value"/>
          <xs:attribute name="action"/>
     </xs:complexType>
     <xs:element name="Section">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
               </xs:sequence>
               <xs:attribute name="path" use="required"/>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="Parameters">
          <xs:sequence>
               <xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:attribute name="name" use="required"/>
                         <xs:attribute name="reference"/>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleList">
          <xs:annotation>
               <xs:documentation>an array of rules</xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleProfile">
          <xs:attribute name="RName" use="required"/>
          <xs:attribute name="RType" type="RuleType" use="required"/>
          <xs:attribute name="Status" default="ON">
               <xs:annotation>
                    <xs:documentation>By default is ON (or if is missing)</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Order"/>
          <xs:attribute name="Direction" type="RouteDirect">
               <xs:annotation>
                    <xs:documentation>Request / Reply</xs:documentation>
               </xs:annotation>
          </xs:attribute>
     </xs:complexType>
     
     
     
     <xs:element name="Profile" type="ProfileType">
          <xs:annotation>
               <xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
          </xs:annotation>
     </xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>

<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
     <ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
     <ProfileData>
          <EnricherParametersProfileData>
               <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="PROCESSING_CODE">
                              <Value field="value" value="T"/>
                         </Section>
                         
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="RECEIVER_NETWORK_ADDRESS">
                              <Value field="value" value="prsunew.moh.hnet.bc.ca"/>
                         </Section>
                         <Section path="RECEIVER_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">

<Enricher>
     <Parameters>
          <Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
     </Parameters>
     <Section path="HEADER">
          <Section path="HL7_STANDARD_VERSION">
               <Value field="value" value="V3PR2"/>
          </Section>
          
          
          <Section path="PROCESSING_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="PROCESSING_MODE_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
               <Value field="value" value="NE"/>
          </Section>
          
          
          <Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
               <Value field="extension" value="SIT1"/>
          </Section>
          
          <Section path="RECEIVER_APPLICATION_NAME[0]">
               <Value field="value" value="receiverAppName"/>
          </Section>
          
          
          <Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
               <Value field="extension" value="receiverOrgId"/>
          </Section>
          <Section path="SENDING_APPLICATION_NAME[0]">
               <Value field="value" value="NLPRSCLNT"/>
          </Section>
          
          
          <Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="3001"/>
          </Section>
          <Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="HIAL_USR"/>
          </Section>
     </Section>
     <Section path="PAYLOAD">
          
          
          <Section path="AUDIT[0]/AUDIT_INFORMATION">
               <Value field="code" value="LATEST"/>
               <Value field="codeSystem" value="PRSAuditParameters"/>
          </Section>
          
          <Section path="CONFIDENCE/CONFIDENCE_VALUE">
               <Value field="value" value="100"/>
          </Section>
          
          <Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
               <Value field="value" value="false"/>
          </Section>
          
          <Section path="JURISDICTION/JURISDICTION_TYPE">
               <Value field="value" value="NL"/>
          </Section>
          
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
               <Value field="code" value="GRS_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
               <Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
               <Value field="code" value="GRS_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
               <Value field="code" value="GRS_ORGANIZATION_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
               <Value field="code" value="GRS_PERSONAL_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
               <Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
               <Value field="code" value="GRS_TELEPHONE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
               <Value field="code" value="PRS_CONDITION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
               <Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
               <Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
               <Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
               <Value field="code" value="PRS_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
               <Value field="code" value="PRS_NOTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
               <Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
               <Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
               <Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
               <Value field="code" value="PRS_STATUS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
               <Value field="code" value="PRS_WORK_LOCATION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
               <Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
               <Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
               <Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
               <Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
               <Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
          </Section>
          
          <Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
               <Value field="value" value="LIC"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
               <Value field="code" value="PrincipalPerson.name.value.family"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
               <Value field="value" value="A"/>
          </Section>
     </Section>
</Enricher>
     </EnricherParameter>
          </EnricherParametersProfileData>
     </ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?

Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation?

Best way to insert data into a non indexed partitioned table?

Similar Messages

Maybe you are looking for