Inserting endline character after every 140 characters in an ascii file ?

HI
I have an input file in ASCII format , that has no end line characters in it(a single line file)
And I want to insert, this end line character after every 140 characters..
How it would be possible in ODI
thanks

If iam not wrong ,you are looking for this
source file
<140 character > < 140 characters >
expected output
<140 character >
<140 character >
Am i right ? Else can you please show an example .

Similar Messages

Is it possible to automatically add a comma after every 6 characters has been typed in a text field?

Hope someone can help me.
What I basically need help with is how to make Acrobat add a comma after every 6 characters in a text field:
XXXXXX,YYYYYY, ZZZZZZ etc

I'm sorry, but I did not understand that (i'm using Acrobat Pro X)
Am I supposed to go to:
Text Field Properties > Format > Custom
and then use Custom Format Script or Custom Keystroke Script?
I tried both and it did not work.
And do the Text Field have to be named "chunkSize"?
Seems like it works. I had to move to the next formfield in order to see the effect.
Is it possible to make it happen in real time (as you type the comma is inserted?)

Insert Blank row After every Row in alv report

How to insert blank row After every row in Alv report

what do you mean by a 'blank row'? ALV displays tabular data with 'any' number of columns. Now if you actually want a blank row (no columns at all, just a row), then that is just not possible. If I'm not mistaken, this question was posted before, so try to do a search on SCN. See what is says.

ASP VBSCRIPT: for a declared string, inserting a line break every N characters

I'm using ASP VB. I want to insert a VbCr or a VbLf into a
declared string
every N characters. FWIW, I want to do this because of an
apparent
limitation in MSXML2, which I am using to "scrape" data from
webpages that I
control: I'm getting spurious exclamation points (!) where
line lengths are
too long. Manually inserting line breaks (which do not render
in HTML) seems
to solve the problem. Can someone tell me how to do this?
Put another way, I need to flesh out the following
pseudocode:
Dim myString, myCursorPosition, myIncrement
myString ="The quick brown fox jumped over the lazy dog."
myCurrentCursorPosition=0
myIncrement=5 ' I want a line break for every myIncrement
While [there are still remaining characters to walk through
in the string
' navigate cursor by myIncrement through myString
' insert a VbLf at myCurrentCursorPosition
myCurrentCursorPosition = myCurrentCursorPosition +
myIncrement
[loop]
Thanks for any help on the syntax here.
-KF

This is one possible solution specific to the problem I'm
having with MSXML.
Code is inefficient for explanatory clarity.
BodyAsHtmlString = replace(BodyAsHtmlString, "</a>",
("</a>"&vbcrlf))
BodyAsHtmlString = replace(BodyAsHtmlString, "</td>",
("</td>"&vbcrlf))
BodyAsHtmlString = replace(BodyAsHtmlString,
"</table>",
("</table>"&vbcrlf))
BodyAsHtmlString = replace(BodyAsHtmlString, "</tr>",
("</tr>"&vbcrlf))
BodyAsHtmlString = replace(BodyAsHtmlString, "</br>",
("</br>"&vbcrlf))
-KF
"Ken Fine" <[email protected]> wrote in message
news:e52ln5$i7$[email protected]..
> Thanks, this code works just fine. However, I'm
realizing that my logic is
> going to need to be a little more sophisticated. The
string that I am
> breaking includes HTML code. Inserting a VbCr can mess
up the code.
>
> I need a way so that the breaks won't break code. Any
ideas? If I could
> identify a char that only appeared in written text,
that's one hacky
> solution.
>
> Thanks again,
> -KF
>
> "Julian Roberts" <[email protected]> wrote in
message
> news:e52kjj$shd$[email protected]..
>> Try something like
>>
>> for i=0 to len(mySt) step 5
>> mySt=left(mySt,i) & vbcrlf &
right(mySt,len(mySt)-i)
>> next
>>
>> --
>> Jules
>>
http://www.charon.co.uk/charoncart
>> Charon Cart 3
>> Shopping Cart Extension for Dreamweaver MX/MX 2004
>>
>>
>>
>>
>
>

BufferedReader Problem (inserting space after every character)

(This is a message I sent to an Aglet forum, however I thought maybe someone here could help me with the BufferedReader problem...with the spacing...read below)
-Blake
ok here's what I'm attempting to do.
I have a Master Aglet that creates a slave which is dispatched to a remote site. The Slave then opens a log file, reads it, and then is supposed to read the file line by line and send each line as a message back to the Master. As the master receives each line it appends the line to the window it created earlier.
I don't know what the problem is...it won't display the log file in the master window.
It does display each line on the console window.I added a println() function to make sure the String array was getting the information. There is a small problem with that as well because it inserts a space after EVERY character (BufferedReader problem??)...what is up with that? for example:
If the log file looked like: This is a log file entry.
the console looks like this when it is printed: T h i s i s a l o g f i l e e n t r y .
.... I had done something in a similiar program...and it worked just fine. here's some source code:
<b>Master:</b>
else if (msg.sameKind("Log")) {
try {
//println for testing purposes
System.out.println(msg.getArg());
appendMessage(" " + msg.getArg() + "test \n");
} catch (Exception e) {
System.out.println(e.toString());
<b>Slave: </b>
File log = new File("C:\\Aglets2.0.2\\public\\WINDOWSUPDATE.log");
FileReader fr = null;
try{
fr = new FileReader(log);
} catch (FileNotFoundException e) {
System.out.println(e);
BufferedReader br = new BufferedReader(fr);
//Get filename of log
try {
Message msg = new Message("FileName", log.getName());
mProxy.sendOnewayMessage(msg);
} catch (InvalidAgletException iae) {
System.out.println(iae.toString());
} catch (Exception e) {
System.out.println(e.toString());
//read each line of file and send back to Master as a message
try{
int i = 0;
while ((s = br.readLine()) != null) {
i++;
count = i;
for (int j = 0; j < count; j++)
System.out.println(s[j]);
//send message back to Master Aglet with log file information
try {
Message msg = new Message("Log", s[j]);
mProxy.sendMessage(msg);
} catch (InvalidAgletException iae) {
System.out.println(iae.toString());
} catch (Exception e) {
System.out.println(e.toString());
//close file reader
fr.close();
} catch (IOException e) {
System.out.println(e.toString());
}

actually i did declare s, you just don't see it there because i only posted some of the code....
I fixed the "spacey" problem by using a FileInputStream instead of a bufferedreader....
like this (i'll post the whole code here:
public class Slave extends BlindAglet {
    AgletProxy mProxy = null;
    boolean back = false;
        char[] c = new char[1000];
    BufferedReader br = null;
    int count;
    // Do some tasks when the aglet is created
    public void onCreation(Object init) {
        // Must make a note of the master here
        mProxy = (AgletProxy)init;
        // Add our own listener and adapter
        addMobilityListener(
            new MobilityAdapter() {
                // Using this as a safety check in case we get caught in a loop in the same host
                public void onArrival(MobilityEvent event) {
                    try {
                        mProxy.sendMessage(new Message("NewSlaveProxy", getAgletContext().getAgletProxy(getAgletID())));
                    } catch (InvalidAgletException iae) {
                        System.out.println(iae);
                    } catch (NotHandledException ex) {
                        System.out.println(ex);
                    } catch (MessageException ex) {
                        System.out.println(ex);
                    //Are we back to origin?
                        if(back) {
                             back = false;
                            try{
                                 FileWriter fw = new FileWriter("test.txt");
                             for (int i = 0; i < count; i += 2){
                                       fw.write(c);
                         fw.close();
                    } catch (IOException e) {
                              System.out.println(e);
                              dispose();
                         dispose();
); /* End of Adapter */
public void run() {
     // Are we at home base?
if (atHome()) {
try {
dispatch(new URL("atp://darklord:4434"));
} catch (Exception e) {
System.out.println(e.toString());
     try{
     File log = new File("C:\\Aglets2.0.2\\public\\WINDOWSUPDATE.log");
     FileInputStream f0 = new FileInputStream(log);
//Get filename of log
try {
     System.out.println(log.getName());
Message msg = new Message("FileName", log.getName());
mProxy.sendOnewayMessage(msg);
} catch (InvalidAgletException iae) {
System.out.println(iae.toString());
} catch (Exception e) {
System.out.println(e.toString());
          //read each line of file and send back to Master as a message
          try{
     int size = f0.available();
     int i = 0;
     for (i = 0; i < size; i++) {
          c[i] = (char) f0.read();
//send message back to Master Aglet with log file information
                         try {
                    Message msg = new Message("Log", c[i]);
                    mProxy.sendOnewayMessage(msg);
          } catch (InvalidAgletException iae) {
                         System.out.println(iae.toString());
                    } catch (Exception e) {
                         System.out.println(e.toString());
count = i;
          } catch (IOException e) {
               System.out.println(e.toString());
               } catch (FileNotFoundException e) {
               System.out.println(e);
     back = true;
     returnHome();
* Returns true if the current host is our origin
public boolean atHome() {
if (getAgletInfo().getOrigin().equals(getAgletContext().getHostingURL().toString()))
return true;
else
return false;
* Allows a slave to contact it's master and ask for a retraction.
public void returnHome() {
try {
Message msg = new Message("RetractMe");
msg.setArg("url", getAgletContext().getHostingURL());
msg.setArg("id", getAgletID());
mProxy.sendOnewayMessage(msg);
} catch (InvalidAgletException iae) {
System.out.println(iae.toString());
} catch (Exception e) {
System.out.println(e.toString());
* Return a reference to our Master's proxy
public AgletProxy getMasterProxy() {
return mProxy;
} /* End of Class

Report views correctly in Report Viewer but on export or print, blank page inserted after every page

Hi all
I'm hoping someone has an idea what is causing this issue. I am using Crystal 2008 and have created many reports over the years, with no issue like this.
I have had to create a label file for an Avery label that does not appear in the Crystal Reports default list of label definitions (have done this many times before for other labels, with no issue).
The report displays perfectly in the CR Report Viewer, however once the report is sent either to PDF export or to the printer, an extra blank page is inserted after every page of the report.
The fact that it displays correctly in the viewer means there is nothing in the report that is amiss.... there is something going on when the report is sent out.
I've read a lot of similar problems, however the idea that it is a network problem doesn't explain why the hundreds of other reports I've created exactly the same way... do not have this problem!
Does anyone know the answer to this puzzle?
regards
Kaz

Hi Karen
Here is the issue. When you look at the report in the viewer you see this:
Notice the dashed line after the body of each label. That line is there because the report is formatted to be a column report:
So the viewer shows you that there is another column to be printed / exported and that is what is happening with the report.
- Ludek

Avoid Commit after every Insert that requires a SELECT

Hi everybody,
Here is the problem:
I have a table of generator alarms which is populated daily. On daily basis there are approximately 50,000 rows to be inserted in it.
Currently i have one month's data in it ... Approximately 900,000 rows.
here goes the main problem.
before each insert command, whole table is checked if the record does not exist already. Two columns "SiteName" and "OccuranceDate" are checked... this means, these two columns are making a unique record when checked together with an AND operation in WHERE clause.
we have also implemented partition on this table. and it is basically partitioned on the basis of OccuranceDate and each partition has 5 days' data.
say
01-Jun to 06 Jun
07-Jun to 11 Jun
12-Jun to 16 Jun
and so on
26-Jun to 30 Jun
NOW:
we have a commit command within the insertion loop, and the each row is committed once inserted, making approximately 50,000 commits daily.
Question:
Can we commit data after say each 500 inserted rows, but my real question is can we Query the records using SELECT which are Just Inserted but not yet committed ?
a friend told me that, you can query the records which are inserted in the same connection session but not yet committed.
Can any one help ?
Sorry for the long question but it was to make u understand the real issue. :(
Khalid Mehmood Awan
khalidmehmoodawan @ gmail.com
Edited by: user5394434 on Jun 30, 2009 11:28 PM

Don't worry about it - I just said that because the experts over there will help you much better. If you post your code details there they will give suggestions on optimizing it.
Doing a SELECT between every INSERT doesn't seem very natural to me, but it all depends on the details of your code.
Also, not committing on time may cause loss of the uncommitted changes. Depending on how critical the data is and the dependency of the changes, you have to commit after every INSERT, in between, or at the end.
Regards,
K.

How to insert horizontal line dynamically after every line item in sapscrip

Hi All,
I have to insert a horizontal line after every new item in sap script.
How to do this .
In some material there is2 line item or in other line item it ay be more .
How to insert horizontal line dynamically after every line item
Point will be rewarded
Regards
Niraj

Hi Niraj,
You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
Some thing like this:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
Let me know if this helps, else please describe your problem with an example.
Luck.

DG4ODBC adds black spaces after every character

I am trying to set up HS using Oracle 10.2.0.5 on RHEL5 (64 bit), FreeTDS, and MS SQL Server.
The ODBC Driver works fine:
[oracle@phsbe1pr ~]$ isql sfasql_freetds_dsn sqlSinfoOne ***
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select name, len( name ) from sys.objects where object_id < 20 ;
---------------------------------------------------------------------------------------------------------------------------------------------+
| name | |
---------------------------------------------------------------------------------------------------------------------------------------------+
| sysrscols | 9 |
| sysrowsets | 10 |
| sysallocunits | 13 |
| sysfiles1 | 9 |
| syspriorities | 13 |
| sysfgfrag | 9 |
---------------------------------------------------------------------------------------------------------------------------------------------+
SQLRowCount returns 6
6 rows fetched
SQL> quit
[oracle@phsbe1pr ~]$
[oracle@phsbe1pr ~]$ tsql -S SFASQL_FreeTDSName -U sqlSinfoOne -P ***
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "UTF-8"
1> select name, len( name ) from sys.objects where object_id < 20
2> order by 1
3> go
name
sysallocunits 13
sysfgfrag 9
sysfiles1 9
syspriorities 13
sysrowsets 10
sysrscols 9
(6 rows affected)
1> exit
[oracle@phsbe1pr ~]$
But when I use the dblink i got every string doubled with spaces after every char:
[oracle@phsbe1pr ~]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Jul 23 17:22:25 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> set linesize 120
SQL> column name format a40
SQL> select "name", length ( "name" )
2 from sys.objects@sfasql_link
3 where "object_id" < 20
4 order by 1
5 /
name LENGTH("NAME")
s y s a l l o c u n i t s 26
s y s f g f r a g 18
s y s f i l e s 1 18
s y s p r i o r i t i e s 26
s y s r o w s e t s 20
s y s r s c o l s 18
6 rows selected.
SQL>
What can I do ?
Mi init.ora is:
HS_FDS_CONNECT_INFO = SFASQL_DSN
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
HS_FDS_TRACE_LEVEL = off
HS_FDS_TRACE_FILE_NAME=/tmp/odbc_hs_sfa.trc
HS_FDS_SQLLEN_INTERPRETATION = 32
set ODBCINI=/etc/odbc.ini
adn odbc.ini contains:
[SFASQL_DSN]
Description = sqlserver
Driver = FreeTDS
# Servername = SFASQL_FreeTDSName
Server = phsspbe.perfumeholding.intra
Address = 172.17.0.45
Port = 1433
Database = SFA_INTERSCAMBIO
TDS_Version = 8.0
Language = us_english
TextSize = 1999
PacketSize = 1470
ClientCharset = ISO-8859-1
DumpFile = /tmp/odbc_sfasql_dsn.log
DumpFileAppend = Yes
DebugFlags =
Encryption = off
#Trace = Yes
#TraceFile = /tmp/odbc_sfasql_dsn.trc
Thank you for every answer!
Andrea

1. Please add to the gateway init file HS_NLS_NCHAR=UCS2
Then test again with a new SQL*Plus session.
When it continues to fail, what's the character set of the Oracle database being used and how did you set the NLS_LANG in your environment?

Inserting a calculated column after every column in cross tab, in crystal report 2011

HI,
I want to insert a calculated column after every column i a cross tab . The cross tab shows , sales by region for a number of years , for example from 2007 to 2013. The year can be changed based on the user parameter. How can I do that ?
Thanks

Hi Feroz,
To calculate the Percentage Change and also to show the Percentage sign, here's what you need to do:
1) Right-click the Calculated Column Header > Calculated Member > Edit ColumnValue Formula and use this code:
cdate(1890,01,01)
If the field used as the column is a datetime field, use this:
cdatetime(1890,01,01,0,0,0)
2) Right-click one of the zero values in the Percentage Column and select Calculated Member > Edit Calculation formula and use this code:
if CurrentColumnIndex = 2 then
    If GridValueAt(CurrentRowIndex, CurrentColumnIndex-2, CurrentSummaryIndex) = 0 then
    0
    else
     (GridValueAt(CurrentRowIndex, CurrentColumnIndex-1, CurrentSummaryIndex) - GridValueAt(CurrentRowIndex, CurrentColumnIndex-2, CurrentSummaryIndex))/
     GridValueAt(CurrentRowIndex, CurrentColumnIndex-2, CurrentSummaryIndex)
     ) * 100
else
    If GridValueAt(CurrentRowIndex, CurrentColumnIndex-3, CurrentSummaryIndex) = 0 then
    0
    else
     (GridValueAt(CurrentRowIndex, CurrentColumnIndex-1, CurrentSummaryIndex) - GridValueAt(CurrentRowIndex, CurrentColumnIndex-3, CurrentSummaryIndex))/
     GridValueAt(CurrentRowIndex, CurrentColumnIndex-3, CurrentSummaryIndex)
     ) * 100
3) Right-click one of the Values in the summary cells > Format Field > Number tab > Customize > Currency Symbol tab > Click the formula button beside 'Currency Symbol' and use this code:
If Year(GridRowColumnValue("Date_field")) = 1890 then
"%" else "$"
Note: Replace Date_field with the field name you've used as the Column in the Crosstab. The double-quotes ARE required and you should remove any curly braces that CR adds automatically.
4) You might want to use a similar code in the 'Position' formula too.
Let me know how this goes.
-Abhilash

Need to commit after every 10 000 records inserted ?

What would be the best way to Commit after every 10 000 records inserted from one table to the other using the following script :
DECLARE
l_max_repa_id x_received_p.repa_id%TYPE;
l_max_rept_id x_received_p_trans.rept_id%TYPE;
BEGIN
SELECT MAX (repa_id)
INTO l_max_repa_id
FROM x_received_p
WHERE repa_modifieddate <= ADD_MONTHS (SYSDATE, -6);
SELECT MAX (rept_id)
INTO l_max_rept_id
FROM x_received_p_trans
WHERE rept_repa_id = l_max_repa_id;
INSERT INTO x_p_requests_arch
SELECT *
FROM x_p_requests
WHERE pare_repa_id <= l_max_rept_id;
DELETE FROM x__requests
WHERE pare_repa_id <= l_max_rept_id;

1006377 wrote:
we are moving between 5 and 10 million records from the one table to the other table and it takes forever.
Please could you provide me with a script just to commit after every x amount of records ? :)I concur with the other responses.
Committing every N records will slow down the process, not speed it up.
The fastest way to move your data (and 10 million rows is nothing, we do those sorts of volumes frequently ourselves) is to use a single SQL statement to do an INSERT ... SELECT ... statement (or a CREATE TABLE ... AS SELECT ... statement as appropriate).
If those SQL statements are running slowly then you need to look at what's causing the performance issue of the SELECT statement, and tackle that issue, which may be a case of simply getting the database statistics up to date, or applying a new index to a table etc. or re-writing the select statement to tackle the query in a different way.
So, deal with the cause of the performance issue, don't try and fudge your way around it, which will only create further problems.

Connecting Window iTunes Store appears after every single search character

Hi Community,
if I use the search in iTunes 10.3.x Store, after tipping a single character always a separate window appears with the message "connecting to the store" - the window appear after every single character of a search e.g. "Madonna" and it will lasts minutes to get a result!
It looks like here: http://dl.dropbox.com/u/1426841/itunes.png
Did anyone have a idea what to do?
I've just tried following steps:
clear iTunes caches
delete iTunes plist's
delete and reinstall iTunes
perform pram reset
latest iTunes updates
Nothing helps at all to cover this problem!
This problem exits since a few month (starting with iTunes 10.2.x), just starts from one day to another without any change at the OS.
Thanx in advance for any helpful ideas ;-)

Try clicking Store>Authorize This Computer in iTunes.
If that doesn't take care of it, take a look at this Apple document -> http://support.apple.com/kb/ts3297.
WTH.

Automatic Double-Space after inserting a character (eg. &)

Hi,
I haven't had this problem previously, but recently whenever I type a bracket or 'and' symbol it automatically inserts a space after the space. For example...
"everything was great (Decker,2004)." as opposed to "everything was great (Decker,2004)."
How do I turn off this automatic double-space? I've looked everywhere, can't figure it out.
Thanks

laurasilver wrote:
I haven't had this problem previously, but recently whenever I type a bracket or 'and' symbol it automatically inserts a space after the space. For example...
"everything was great (Decker,2004)." as opposed to "everything was great (Decker,2004)."
Hi Laura,
The forum is working against you as well. The forums software strips out extra spaces in the display of a post, although it shows them in the compose window, which let me locate them. I replaced the pair with sticky spaces, so the line above (and below without the quotation formatting) should appear more as you typed it.
"everything was great (Decker,2004)." as opposed to "everything was great (Decker,2004)."
The first place to check is Pages > Preferences > Auto Correction. Someone may have added this to the auto correction list. Unlikely, due to the number of steps that would have to be taken, but possible.
Regards,
Barry

Inserting Null character through C into Oracle

Hello,
I am reading data through pro C program from a file which contains null characters.
I am fetching data into character buffer but when I try to insert the buf into Oracle of table it is inserting all the charaters before that null character and the remaining characters after the null characters will be truncated.
So kindly help me how to handle null character ion Pro C and insert the entire characters string which contains null characters in Varchar field.
Thanks,
Ananth
null

Please check the pro C/C++ developers guide.

CRYSTAL REPORT EXPORT TO PDF INSERTS lowercasee i after t

I have a crystal report file that is stored as image type in table (SQL Server).When i open the report file in my application (Visual Studio (C#) ), it shows the required one.But When i export to pdf and save it to my local hard drive, and if i open that file, i find that after every lowercase 't' , letter 'i' is appended.I searched through google and found that it migh be a font issue.Even after changing the font, i was not able to resolve the issue.
Example : 'Project' becomes 'Projecti'
Please provide a resolution to this issue

See if KB [1547961 - The character 'i' is added after every lower case 't' when a report is exported to PDF file format|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343337333933363331%7D.do] helps. Also, search these forums. There are a few threads on the issue here.
KB was found by using the following search term; 'character i crystal net' )as well as a number of variations. (Use the search box in the top right corner of this web page .
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Inserting endline character after every 140 characters in an ascii file ?

Similar Messages

Maybe you are looking for